Synchronization properties of multi-oscillator circadian systems

Dissertation presented to obtain the Ph.D degree in Computational Biology

Estudo do motor em disco com o rotor em alumínio e em supercondutor multi-semente

Nesta dissertação é realizado o estudo de um motor em disco polifásico com armadura convencional e rotor que pode ser convencional, em alumínio, ou composto por material supercondutor de alta temperatura multi‐semente. O motor com o rotor em alumínio apresenta um comportamento assíncrono bem definido, baseado na lei geral de indução de eletromotrizes no induzido. Contudo, ao ser mergulhado em azoto líquido, evidencia melhores características eléctricas, tanto do induzido como do indutor, mesmo que o núcleo ferromagnético convencional possa exibir degradação magnética. O motor com o rotor SAT exibe um comportamento distinto, evidenciando ambos os regimes síncrono e assíncrono estáveis. O regime síncrono fica caracterizado pelo fenómeno de aprisionamento de campo, que garante que o rotor gire síncrono com o campo girante do estator. Em regime assíncrono, para um determinado valor de binário resistente aplicado superior ao electromagnético máximo desenvolvido pelo motor, o fenómeno de escoamento de campo está presente, sendo o binário electromagnético motor reforçado por um binário extra de perdas de carácter resistivo desenvolvidas no rotor devido à interacção da densidade de corrente a campos eléctricos que se estabelecem no rotor. Neste caso, o fenómeno de escoamento de campo não é devido a forças de Lorentz que se definem na matriz de Abrikosov, mas sim devido a esta ser “puxada” pelo campo girante do estator, ficando a matriz a deslizar sobre o rotor. De modo a obter as características dos sistemas electromecânicos em estudo é realizada uma análise teórica, baseada na teoria convencional das máquinas eléctricas, com o objectivo de compreender alguns dos fenómenos do motor de fluxo axial, e uma análise baseada num programa comercial de elementos finitos onde o fenómeno da supercondutividade é simulado com base na relação entre o campo elétrico e a densidade de corrente pela lei da potenciação (E‐J power law). O ensaio dos motores referidos é realizado para comparar ambos os sistemas e de realçar o princípio de funcionamento e as características mais relevantes de cada um. Da análise realizada é desenvolvido um modelo que caracteriza o funcionamento da máquina com o rotor com SAT.

AGNI: an API for the control of automomous service robots

With the continuum growth of Internet connected devices, the scalability of the protocols used for communication between them is facing a new set of challenges. In robotics these communications protocols are an essential element, and must be able to accomplish with the desired communication. In a context of a multi-­‐‑agent platform, the main types of Internet communication protocols used in robotics, mission planning and task allocation problems will be revised. It will be defined how to represent a message and how to cope with their transport between devices in a distributed environment, reviewing all the layers of the messaging process. A review of the ROS platform is also presented with the intent of integrating the already existing communication protocols with the ServRobot, a mobile autonomous robot, and the DVA, a distributed autonomous surveillance system. This is done with the objective of assigning missions to ServRobot in a security context.

Integration of a mobile autonomous robot in a surveillance multi-agent system

This dissertation aims to guarantee the integration of a mobile autonomous robot equipped with many sensors in a multi-agent distributed and georeferenced surveillance system. The integration of a mobile autonomous robot in this system leads to new features that will be available to clients of surveillance system may use. These features may be of two types: using the robot as an agent that will act in the environment or by using the robot as a mobile set of sensors. As an agent in the system, the robot can move to certain locations when alerts are received, in order to acknowledge the underlying events or take to action in order to assist in resolving this event. As a sensor platform in the system, it is possible to access information that is read from the sensors of the robot and access complementary measurements to the ones taken by other sensors in the multi-agent system. To integrate this mobile robot in an effective way it is necessary to extend the current multi-agent system architecture to make the connection between the two systems and to integrate the functionalities provided by the robot into the multi-agent system.

Use of multi-sensory marketing techniques and its influence on brand experience in retail and HORECA sector

Double degree. A Work Project presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA- School of Business and Economics and Warsaw School of Economics

Multi-Enzymatic Systems for Cleaning-up Synthetic Dyes from the Environment

Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)

Strategic design of There App’s business model: From product to multi-sided platform

The following work project illustrates the strategic issues There App, a mobile application, faces regarding the opportunity to expand from its current state as a product to a multisided platform. Initially, a market analysis is performed to identify the ideal customer groups to be integrated in the platform. Strategic design issues are then discussed on how to best match its value proposition with the identified market opportunity. Suggestions on how the company should organize its resources and operational processes to best deliver on its value proposition complete the work.

Analysis and implementation of a multi-ratio switched capacitor DC-DC converter for a supercapacitor power supply

An energy harvesting system requires an energy storing device to store the energy retrieved from the surrounding environment. This can either be a rechargeable battery or a supercapcitor. Due to the limited lifetime of rechargeable batteries, they need to be periodically replaced. Therefore, a supercapacitor, which has ideally a limitless number of charge/discharge cycles can be used to store the energy; however, a voltage regulator is required to obtain a constant output voltage as the supercapacitor discharges. This can be implemented by a Switched-Capacitor DC-DC converter which allows a complete integration in CMOS technology, although it requires several topologies in order to obtain a high efficiency. This thesis presents the complete analysis of four different topologies in order to determine expressions that allow to design and determine the optimum input voltage ranges for each topology. To better understand the parasitic effects, the implementation of the capacitors and the non-ideal effect of the switches, in 130 nm technology, were carefully studied. With these two analysis a multi-ratio SC DC-DC converter was designed with an output power of 2 mW, maximum efficiency of 77%, and a maximum output ripple, in the steady state, of 23 mV; for an input voltage swing of 2.3 V to 0.85 V. This proposed converter has four operation states that perform the conversion ratios of 1/2, 2/3, 1/1 and 3/2 and its clock frequency is automatically adjusted to produce a stable output voltage of 1 V. These features are implemented through two distinct controller circuits that use asynchronous time machines (ASM) to dynamically adjust the clock frequency and to select the active state of the converter. All the theoretical expressions as well as the behaviour of the whole system was verified using electrical simulations.

8-Phase Ring oscillator for modern receivers

The evolution of receiver architectures, built in modern CMOS technologies, allows the design of high efficient receivers. A key block in modern receivers is the oscillator. The main objective of this thesis is to design a very low power and low area 8-Phase Ring Oscillator for biomedical applications (ISM and WMTS bands). Oscillators with multiphase outputs and variable duty cycles are required. In this thesis we are focused in 12.5% and 50% duty-cycles approaches. The proposed circuit uses eight inverters in a ring structure, in order to generate the output duty cycle of 50%. The duty cycle of 1/8 is achieved through the combination of the longer duty cycle signals in pairs, using, for this purpose, NAND gates. Since the general application are not only the wireless communications context, as well as industrial, scientific and medical plans, the 8-Phase Oscillator is simulated to be wideband between 100 MHz and 1 GHz, and be able to operate in the ISM bands (447 MHz-930 MHz) and WMTS (600 MHz). The circuit prototype is designed in UMC 130 nm CMOS technology. The maximum value of current drawn from a DC power source of 1.2 V, at a maximum frequency of 930 MHz achieved, is 17.54 mA. After completion of the oscillator layout studied (occupied area is 165 μm x 83 μm). Measurement results confirm the expected operating range from the simulations, and therefore, that the oscillator fulfil effectively the goals initially proposed in order to be used as Local Oscillator in RF Modern Receivers.

Psychological safety, authentic leadership and social networks : A psycho-structural approach to the study of groups

Tese de Doutoramento em Psicologia na área de especialização de Psicologia das Organizações apresentada ao ISPA - Instituto Universitário

Comercialização de energia em mercados em bolsa: simulador multi-agente e análise do impacto da geração variável nos preços diários

O processo de reestruturação do setor elétrico deu origem à criação de diferentes estruturas de mercado, tendo como objetivo o aumento da competitividade e eficiência. Atualmente, a comercialização de energia elétrica pode ser realizada com recurso a mercados em bolsa ou através da celebração de contratos bilaterais. Sendo o mercado em bolsa caraterizado por uma forte volatilidade de preços, e considerando a atribuição de incentivos para o crescimento da geração renovável não controlada, revela-se importante analisar o impacto de níveis elevados de energia eólica sobre os preços do mercado diário. Neste contexto, a presente dissertação tem como principais objetivos estudar e implementar os algoritmos de preço marginal único e preço marginal local, normalmente utilizados no mercado em bolsa, bem como dotar o simuladormultiagente MANREM com um módulo para simular os mercados diário e intradiário, e analisar o impacto de níveis elevados de energia eólica sobre os preços do mercado diário. O estudo detalhado de um caso prático e os resultados obtidos com recurso ao simuladormulti-agente permitiram replicar, em computador, o impacto esperado, sendo possível observar uma redução de preços e uma alteração dos compromissos de produção dos produtores convencionais. O estudo contemplou a simulação do mercado diário com recurso aos algoritmos de preço marginal único e preço marginal local, podendo constatar-se que a ferramenta multi-agente constitui um auxiliar importante à tomada de decisão nos mercados de eletricidade.

Ion-beam sources based on superionic solid electrolytes

An ion emitter consisting of a sharp silver tip covered in RbAg4I5 solid electrolyte film has been developed and studied. An accelerating potential is applied and Ag+ ions are emitted from the tip’s apex by field evaporation. The emitted ions are collected by a Faraday cup, producing a current on the pico/nanoampere level which is read by an electrometer. The tips were produced mechanically by sandpaper polishing. The sharpest tip produced had a 2:4 m apex radius. Two deposition methods were studied: thermal vacuum and pulsed laser deposition. The best tip produced a peak current value of 96nA at 180oC, and a quasi-stable 4nA emission current at 160oC, both using an extraction potential of 10kV . The emission dependence on time, temperature and accelerating potential has been studied. Deposited films were characterized by X-ray diffraction (XRD), profilometry, optical and Scanning Electron Microscope (SEM) and Secondary Ion Mass Spectroscopy (SIMS) measurements. Several ion emitters were developed, the latter ones were all able to maintain stable high ion emissions for long periods of time. This investigation was a continuation of an ongoing project backed by the European Space Agency, with the objective of making a proof of concept of this kind of ion emitter with potential application on ion thrusters for orbiting satellites. Going forward, it would be interesting to make a finer analysis of the electrolyte’s conductivity at high temperatures, explore Wien Effect-based emission and to further develop a multi-tip ion emitter prototype.