Stress Analysis in Platform-Switching Implants: A 3-Dimensional Finite Element Study

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and pen-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the Solid Works 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0 degrees), oblique (45 degrees), and lateral (90) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the pen-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

Orbital Implants Insertion to Improve Ocular Prostheses Motility

The objectives of this study were, through a literature review, to point the differences between orbital implants and their advantages and disadvantages, to evaluate prosthesis motility after orbital implants are inserted, and to point the implant wrapping current risks. Sixty-seven articles were reviewed. Enucleation implants can be autoplastics or alloplastics and porous (including natural and synthetic hydroxyapatite [HA]) or nonporous (silicone). Hydroxyapatite is the most related in the literature, but it has disadvantages, too, that is, all orbital implants must be wrapped. Exposure of the porous orbital implant can be repaired using different materials, which include homologous tissue, as well as autogenous graft, xenograft, and synthetic material mesh. The most used materials are HA and porous polyethylene orbital implant. The HA implant is expensive and possibly subject corals to damage, different from porous polyethylene orbital implants. Porous implants show the best prosthesis motility and a minimum rate of implants extrusion. Implant wraps can facilitate smoother entry of the implant into the orbit and allow reattachment of extraocular muscles. They also serve as a barrier between the overlying soft tissue and the rough surface of the implant, protecting implants from exposure or erosion.

THE EFFECT of E-GLASS FIBERS and ACRYLIC RESIN THICKNESS on FRACTURE LOAD IN A SIMULATED IMPLANT-SUPPORTED OVERDENTURE PROSTHESIS

Statement of problem. Implant overdenture prostheses are prone to acrylic resin fracture because of space limitations around the implant overdenture components.Purpose. The purpose of this study was to evaluate the influence of E-glass fibers and acrylic resin thickness in resisting acrylic resin fracture around a simulated overdenture abutment.Material and methods. A model was developed to simulate the clinical situation of an implant overdenture abutment with varying acrylic resin thickness (1.5 or 3.0 mm) with or without E-glass fiber reinforcement. Forty-eight specimens with an underlying simulated abutment were divided into 4 groups (n=12): 1.5 mm acrylic resin without E-glass fibers identified as thin with no E-glass fiber mesh (TN-N); 1.5 mm acrylic resin with E-glass fibers identified as thin with E-glass fiber mesh (TN-F); 3.0 mm acrylic resin without E-glass fibers identified as thick without E-glass fiber mesh (TK-N); and 3.0 mm acrylic resin with E-glass fibers identified as thick with E-glass fiber mesh (TK-F). All specimens were submitted to a 3-point bending test and fracture loads (N) were analyzed with a 2-way ANOVA and Tukey's post hoc test (alpha=.05).Results. The results revealed significant differences in fracture load among the 4 groups, with significant effects from both thickness (P<.001) and inclusion of the mesh (P<.001). Results demonstrated no interaction between mesh and thickness (P=.690). The TN-N: 39 +/- 5 N; TN-F: 50 +/- 6.9 N; TK-N: 162 +/- 13 N; and TK-F: 193 +/- 21 N groups were all statistically different (P<.001).Conclusions. The fracture load of a processed, acrylic resin implant-supported overdenture can be significantly increased by the addition of E-glass fibers even when using thin acrylic resin sections. on a relative basis, the increase in fracture load was similar when adding E-glass fibers or increasing acrylic resin thickness. (J Prosthet Dent 2011;106:373-377)

Analysis of Masticatory Cycle Efficiency in Complete Denture Wearers

Purpose: This study assessed masticatory efficiency and duration of the masticatory cycle in 14 asymptomatic patients with severe bone resorption. All patients had worn complete dentures for over 10 years. Recall visits were scheduled at 5 months and 1 year after receiving new dentures.Materials and Methods: Fourteen patients were evaluated in this study. The Research Diagnostic Criteria questionnaire and tests of the efficiency and duration of the masticatory cycle were performed with artificial food before, 5 months after, and 1 year after new dentures were delivered. Masticatory efficiency was assessed using a sieve system; artificial food was ground for 35 masticatory cycles and monitored by the operator.Results: Masticatory efficiency at 5 months was significantly improved for the 0.42-mm mesh. An improvement in masticatory efficiency and a reduction in mastication time were observed with the new dentures after 1 year.Conclusion: The results of this study indicated that 5 months did not allow enough time to demonstrate improved muscular capacity and ability after receiving new dentures. After 1 year, the duration of the masticatory cycle was reduced, and masticatory efficiency was significantly improved.

Avaliação do Índice de Remanescente Adesivo utilizando braquetes com e sem tratamento na base e a interação com três sistemas de colagem

OBJETIVO: avaliar o Índice de Remanescente Adesivo (IRA) em dentes bovinos após a descolagem de braquetes com e sem tratamento na base. METODOLOGIA: foram utilizados três sistemas de colagem ortodôntica para os dois padrões de base. Os dentes bovinos foram divididos em seis grupos de 40, de acordo com a base do braquete e o sistema de colagem. Vinte e quatro horas após a colagem foram realizados os testes de compressão em uma máquina de ensaios. A avaliação do IRA foi realizada em um estereomicroscópio por três examinadores calibrados. Foi utilizado o teste não paramétrico de Kruskal-Wallis, seguido do método de Dunn, para fazer as comparações múltiplas entre todos os grupos. RESULTADOS E CONCLUSÕES: observou-se que o tratamento das bases dos braquetes com óxido de alumínio não foi determinante para o aumento da adesividade entre o braquete e o adesivo. O grupo em que se utilizou braquetes com tratamento na base e adesivo TXT (3M-Unitek) + Transbond Plus SEP (3M-Unitek) apresentou a maior parte das fraturas na interface dente-adesivo (escore 4).

THE INFLUENCE of SHORT-HEATING-CYCLE INVESTMENTS on THE QUALITY of COMMERCIALLY PURE TITANIUM CASTINGS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A marker-and-cell approach to free surface 2-D multiphase flows

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Catch and selectivity parameters of the anastomid fish Schizodon nasutus using gillnets in the Jurumirim reservoir (São Paulo, Brazil)

Catch and selectivity parameters using gillnets were calculated for Schizodon nasutus in the Jurumirim reservoir on the Parana-panema River in southern Brazil. The simple gillnets used were made of monofilament nylon of 30 to 140 mm mesh size an of different heights. The relative abundance of the S. nasutus caught was analysed monthly and a positive relationship was found between catches per unit effort in number and biomass. The relative catches were more abundant for the nets of 40 and 50 mm, mesh size. Catches were characterized by clear temporal variations and a predominance of medium size fish throughout the study period. The selectivity curve of gillnets for S. nasutus in this ecosystem was obtained. The catch obtained was compared with the available catch for each mesh size, and the available catch for a certain length of fish was calculated starting from the theoretical selectivity curve. The 50 mm mesh size gillnet showed the best fit between real and available captures and was considered the most suitable, because a smaller mesh size resulted in a catch of predominantly immature specimens. It is expected that these results will contribute to improving management strategies for conservation of resources. Parameters such as the minimum catch length advisable or the mesh size permitted for a given species are indispensable for such decision-making.

Differential benthic occupation by crabs in the Ubatuba bay, São Paulo, Brazil

The goal of this work was to examine the occurrence of brachyurans in soft bottom sublittoral habitats and their association with some environmental factors. The relative abundance of crabs in two depth strata (from 4.5 to 9 m and from 9 to 18 m) was quantified. Crabs were collected with an otter-trawl with 3.7 m of mouth opening and 12-mm mesh in the cod end. Monthly sampling, consisted of a single trawl in each stratum during a 1-yr period, were carried out. Fifteen brachyuran and six anomuran species were found, including Callinectes ornatus Ordway, 1863; Callinectes danae Smith, 1869; Hepatus pudibundus (Herbst, 1785); Libinia spinosa H. Milne-Edwards, 1834; Persephona punctata (Linnaeus, 1758), and P. mediterranea (Herbst, 1794), which were the most abundant and frequent in the area. The most abundant swimming crabs in both strata were C. ornatus and C, dan(re. Size differences in C. ornatus were observed between strata, suggesting a spatial separation of juveniles and adult crabs.

Importance of lateral lagoons for the ichthyofauna in a large tropical reservoir

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Population biology of shrimp Macrobrachium jelskii (Miers, 1778) (Decapoda, Palaemonoidea) at the Grande River at northwest of the state of Minas Gerais, Brazil

OBJETIVO: A biologia populacional do camarão de água doce Macrobrachium jelskii foi investigada, com ênfase na distribuição de frequência em classes de tamanho, razão sexual, período reprodutivo e recrutamento juvenil. Além disso, a abundância dos indivíduos foi correlacionada com os fatores abióticos. MÉTODOS: Amostras foram coletadas mensalmente de julho de 2005 a junho de 2007, às margens do Rio Grande, região de Planura, estado de Minas Gerais, Brasil (20º 09' S e 48º 40' W), usando uma rede de arrasto (1.0 mm tamanho da malha e 2.0 × 0.5 m de largura). O equipamento foi arrastado por duas pessoas às margens da vegetação do rio por 100 metros de distância, percorridos por uma hora. em laboratório, os espécimes foram identificados, mensurados e sexados. RESULTADOS: Um total de 2,789 espécimes foi analisado, no qual correspondem a 1,126 machos (549 jovens e 577 adultos) e 1,663 fêmeas (1,093 jovens, 423 adultos não ovígeras e 147 ovígeras). A razão sexual diferiu significativamente a favor de fêmeas de M. jelskii (1:1.48; χ² = 103.95; p < 0.0001). A média de tamanho do comprimento da carapaça (CL) das fêmeas (6.32 ± 1.84 mm CL) foi estatisticamente maior do que dos machos (5.50 ± 1.07 mm CL) (p < 0.001). A distribuição de freqüência em classes de tamanho dos espécimes revela um padrão de distribuição unimodal e não normal para machos e fêmeas (W = 0.945; p < 0.01). Não foi observada relação entre a abundância de M. jelskii e as variáveis ambientais (p = 0.799). CONCLUSÃO: A presença de fêmeas ovígeras e jovens na população sugere um padrão de reprodução e recrutamento contínuos para M. jelskii na região de Planura.

Viés Analítico em Estudos Tafonômicos com Macroinvertebrados: Implicações (Paleo)Ambientais e (Paleo)Ecológicas

A review of recent literature shows that most taphonomic studies of Holocene and fossil macrovertebrates are not methodologically standardized. Hence, results from distinct studies are not comparable, even among researches sharing virtually identical goals, targeting the same biological group of similar age and depositional environment. The effects of the shell size in the taphonomic analysis are still poorly understood. In order to study this issue, the taphonomic signatures (articulation, valve type, fragmentation, abrasion, corrosion, edge modification, color alteration, bioerosion and encrustation) of brachiopod shells (Bouchardia rosea (Mawe)), from Ubatuba Bay in the northern coast of São Paulo State, were investigated according to the sieve sizes. In the study area, 14 collecting stations were sampled via Van Veen grab sampler, along a bathymetric gradient, ranging from 0 to 35 m of depth. Bulk samples were sieved through 8 mm, 6 mm, and 2 mm mesh sizes, yielding a total of 5.204 shells. The results indicate that, when taphonomic signatures were independently analyzed per size classes (8 mm, 6 mm, and 2 mm), the taphonomic signatures are recorded in a complex and random way. Additionally, cluster analysis showed that the similarity among the clusters vary according to the considered sieve size. Thus, the sieve size plays an important role in the distribution of taphonomic signatures in shells of distinct sizes. These results suggest that the concentration of the taphonomic analysis on one class (e.g., the largest sieve size, 8 mm) is not always the best method. Rather, the total data (all sieves included) seems more accurate in recording the whole spectrum of taphonomic processes recorded in shells of a given assemblage.

Occurrence of Pseudosida ramosa Daday, 1904 (Crustacea: Cladocera: Ctenopoda) in marginal lakes of the Paranapanema River, with comments on its distribution.

Aim: Contribute to the understanding of the distribution of a littoral cladoceran, Pseudosida ramosa Daday, 1904, in Brazil, with special reference for the Paranapanema River basin (Southeast Brazil); Methods: The specimens were sampled in two floodplain lakes located in the middle Paranapanema River basin, in the boundary of São Paulo and Parana States, using a standard plankton net (50 [mu]m mesh size). Trinocular microscopic with camera lucida and milimetric scale was used for the observation and measurements of the specimens; Results: Only three individuals were found (in winter and summer), despite of an extensive sampling program during 17 consecutive months of observations in both lakes. The largest body length was 1,146 [mu]m. The taxonomical identification followed Korovchinsky (1992); Conclusions: This species have a wide geographical distribution in Brazil, but it is restricted to zones colonized by aquatic macrophytes and seems to occur in low population abundance. The scarcity of registers of P. ramosa demonstrates the necessity of deeper investigations of littoral habits as well as the important role of this kind of environment for the conservation of the rivers/reservoirs biota, including some possible rare species.

Composição e abundância da ictiofauna de duas lagunas costeiras da América do Sul Austral: lagoa do Peixe (31ºS; 51ºW), Brasil e laguna Mar Chiquita (37ºS; 57ºW), Argentina

This article describes and compares the shallow water fish-fauna from two coastal lagoons (Peixe Lagoon, in Brazil, and Mar Chiquita Lagoon, in Argentina). Peixe Lagoon was sampled between 2000 and 2001 using a 9 m beach seine net (12 mm bar mesh in the wings and 5 mm in the centre 3 m section) totalizing 125 samples, which yielded 33,848 individuals and 32 species. Mar Chiquita Lagoon was sampled from 1995 to 1998 using a 21) m beach seine net (12 mm bar mesh) totalizing 232 samples resulting in 31,097 individuals of 28 species. A total of 47 species were observed in both lagoons and 13 were shared. The "marine-estuarine-related" species were similar and dominate the fish assemblages in both lagoons. The remaining species were similar to the species collected along the southern Brazil, Uruguay and Argentina estuaries. The number of species observed in Peixe Lagoon (S = 32) was higher than in Mar Chiquita Lagoon (S = 28) and is probably associated with a strong latitudinal gradient of species richness increasing from north to south. Considering that the Peixe Lagoon and Mar Chiquita Lagoon are isolated by the large estuaries of Patos Lagoon and Prata River, the composition of the species with low abundance and occasional occurrence were different for each local studied. These results expand the knowledge for the fauna of both sites and help conservation and management from both lagoons.

Factors determining the structure of fish communities in Pantanal lagoons (MS, Brazil)

The fish communities of lagoons in the Nhecolandia Pantanal were studied to determine the factors which are responsible for the composition and abundance of species. Fishes were collected in 19 lagoons during August 1997, after their isolation from the River Negro, using beach seines (15 x 1.5 m; 2 mm mesh). A total of 51 species were collected. In the lagoons, or in parts with dense macrophytes, a screened box trap was used. Fishing was also accomplished with hooks of several sizes. Species richness was estimated by the jack-knife procedure, after adjustment to the log-normal distribution and with von Bertalanffy's equation (asymptotic). The most important factors in the community organization were macrophyte cover, piscivore abundance and depth of the lagoons. The role of these habitats in the Pantanal ecosystem was discussed.