Lightning activity in Brazilian thunderstorms during TROCCINOX: implications for NOx production

During the TROCCINOX field experiment in January and February 2005, the contribution of lightning-induced nitrogen oxides (LNOx) from tropical and subtropical thunderstorms in Southern Brazil was investigated. Airborne trace gas measurements (NO, NOy, CO and O-3) were performed up to 12.5 km with the German research aircraft Falcon. During anvil penetrations in selected tropical and subtropical thunderstorms of 4 and 18 February, NOx mixing ratios were on average enhanced by 0.7-1.2 and 0.2-0.8 nmol mol(-1) totally, respectively. The relative contributions of boundary layer NOx (BL-NOx) and LNOx to anvil-NOx were derived from the NOx-CO correlations. on average similar to 80-90% of the anvil-NOx was attributed to LNOx. A Lightning Location Network (LINET) was set up to monitor the local distribution of cloud-to-ground (CG) and intra-cloud (IC) radiation sources (here called 'strokes') and compared with lightning data from the operational Brazilian network RINDAT (Rede Integrada Nacional de Deteccao de Descargas Atmosfericas). The horizontal LNOx mass flux out of the anvil was determined from the mean LNOx mixing ratio, the horizontal outflow velocity and the size of the vertical cross-section of the anvil, and related to the number of strokes contributing to LNOx. The values of these parameters were derived from the airborne measurements, from lightning and radar observations, and from a trajectory analysis. The amount of LNOx produced per LINET stroke depending on measured peak current was determined. The results were scaled up with the Lightning Imaging Sensor (LIS) flash rate (44 flashes s(-1)) to obtain an estimate of the global LNOx production rate. The final results gave similar to 1 and similar to 2-3 kg(N) per LIS flash based on measurements in three tropical and one subtropical Brazilian thunderstorms, respectively, suggesting that tropical flashes may be less productive than subtropical ones. The equivalent mean annual global LNOx nitrogen mass production rate was estimated to be 1.6 and 3.1 Tg a(-1), respectively. By use of LINET observations in Germany in July 2005, a comparison with the lightning activity in mid-latitude thunderstorms was also performed. In general, the same frequency distribution of stroke peak currents as for tropical thunderstorms over Brazil was found. The different LNOx production rates per stroke in tropical thunderstorms compared with subtropical and mid-latitude thunderstorms seem to be related to the different stroke lengths (inferred from comparison with laboratory data and observed lengths). In comparison, the impact of other lightning parameters as stroke peak current and stroke release height was assessed to be minor. The results from TROCCINOX suggest that the different vertical wind shear may be responsible for the different stroke lengths.

Lightning characteristics observed by a VLF/LF lightning detection network (LINET) in Brazil, Australia, Africa and Germany

This paper describes lightning characteristics as obtained in four sets of lightning measurements during recent field campaigns in different parts of the world from mid-latitudes to the tropics by the novel VLF/LF (very low frequency/low frequency) lightning detection network (LINET). The paper gives a general overview on the approach, and a synopsis of the statistical results for the observation periods as a whole and for one special day in each region. The focus is on the characteristics of lightning which can specifically be observed by this system like intra-cloud and cloud-to-ground stroke statistics, vertical distributions of intra-cloud strokes or peak current distributions. Some conclusions regarding lightning produced NOx are also presented as this was one of the aims of the tropical field campaigns TROCCINOX (Tropical Convection, Cirrus and Nitrogen Oxides Experiment) and TroCCiBras (Tropical Convection and Cirrus Experiment Brazil) in Brazil during January/February 2005, SCOUT-O3 (Stratospheric-Climate Links with Emphasis on the Upper Troposphere and Lower Stratosphere) and TWP-ICE (Tropical Warm Pool-International Cloud Experiment) during November/December 2005 and January/February 2006, respectively, in the Darwin area in N-Australia, and of AMMA (African Monsoon Multidisciplinary Analyses) in W-Africa during June-November 2006.

In vitro surface roughness of different glass ionomer cements indicated for ART restorations

Aim: The aim of this in vitro study was to evaluate the surface roughness of three glass ionomer cements (GICs) indicated for ART restorations. Methods: Ten cylindrical specimens of three commercial glass ionomers cements (Vidrion R - S.S. White, Maxxion R - FGM and Vitromolar DFL) were prepared (n=30) without surface finishing or protection. Twenty-four hours after preparation, the surface roughness measurements were obtained as the mean of three readings of the surface of each specimen by profilometry. The roughness values (Ra, μm) were subjected to one-way ANOVA and Tukey's test (p<0.05). Results: No statistically significant differences were observed between Vidrion R (0.18 ± 0.05) and Vitromolar (0.21 ± 0.05), whereas Maxxion R presented significantly higher roughness values than those of the other materials. Conclusions: It may be concluded that characteristics of particle size and composition of the different GICs affected their surface roughness 24 h after preparation.

The gender perspective in economic and labour policies: state of the art in Latin America and the Caribbean

Includes bibliography

Titanium in Dentistry: Historical development, state of the art and future perspectives

Titanium is a metallic element known by several attractive characteristics, such as biocompatibility, excellent corrosion resistance and high mechanical resistance. It is widely used in Dentistry, with high success rates, providing a favorable biological response when in contact with live tissues. Therefore, the objective of this study was to describe the different uses of titanium in Dentistry, reviewing its historical development and discoursing about its state of art and future perspective of its utilization. A search in the MEDLINE/PubMed database was performed using the terms 'titanium', 'dentistry' and 'implants'. The title and abstract of articles were read, and after this first screening 20 articles were selected and their full-texts were downloaded. Additional text books and manual search of reference lists within selected articles were included. Correlated literature showed that titanium is the most used metal in Implantology for manufacturing osseointegrated implants and their systems, with a totally consolidated utilization. Moreover, titanium can be also employed in prosthodontics to obtain frameworks. However, problems related to its machining, casting, welding and ceramic application for dental prosthesis are still limiting its use. In Endodontics, titanium has been used in association to nickel for manufacturing rotatory instruments, providing a higher resistance to deformation. However, although the different possibilities of using titanium in modern Dentistry, its use for prostheses frameworks still needs technological improvements in order to surpass its limitations. © 2012 Indian Prosthodontic Society.

Analysis of the lightning attractive radius of power transmission lines through the use of a physically-oriented model

Models of different degrees of complexity are found in the literature for the estimation of lightning striking distances and attractive radius of objects and structures. However, besides the oversimplifications of the physical nature of the lightning discharge on which most of them are based, till recently the tridimensional structure configuration could not be considered. This is an important limitation, as edges and other details of the object affect the electric field and, consequently, the upward leader initiation. Within this context, the Self-consistent leader initiation and propagation model (SLIM) proposed by Becerra and Cooray is state-of-the-art leader inception and propagation leader model based on the physics of leader discharges which enables the tridimensional geometry of the structure to be taken into account. In this paper, the model is used for estimating the striking distance and attractive radius of power transmission lines. The results are compared with those obtained from the electrogeometric and Eriksson's models. © 2003-2012 IEEE.

EVOLUTIONARY AESTHETICS AND SEXUAL SELECTION IN THE EVOLUTION OF ROCK ART AESTHETICS

This theoretical proposal applies evolutionary aesthetic, animal signalling and sexual selection to understand our artistic cognition, especially rock art aesthetics. Iconographic motifs, universally found in rock art, indicate which set of pre-artistic aesthetic psychological bias has been co-opted to catch the viewer`s attention. The co-evolutionary process of sexual selection could have shaped the design features of both rock art images and their aesthetic cognition by conferring mutual benefits on both producers, via manipulation, and receivers, via information extraction. We show some strategic techniques identified in rock art and art that indicate the occurrence of this co-evolution between producers and receivers.

Rock Art at the Pleistocene/Holocene Boundary in Eastern South America

Background: Most investigations regarding the First Americans have primarily focused on four themes: when the New World was settled by humans; where they came from; how many migrations or colonization pulses from elsewhere were involved in the process; and what kinds of subsistence patterns and material culture they developed during the first millennia of colonization. Little is known, however, about the symbolic world of the first humans who settled the New World, because artistic manifestations either as rock-art, ornaments, and portable art objects dated to the Pleistocene/Holocene transition are exceedingly rare in the Americas. Methodology/Principal Findings: Here we report a pecked anthropomorphic figure engraved in the bedrock of Lapa do Santo, an archaeological site located in Central Brazil. The horizontal projection of the radiocarbon ages obtained at the north profile suggests a minimum age of 9,370640 BP, (cal BP 10,700 to 10,500) for the petroglyph that is further supported by optically stimulated luminescence (OSL) dates from sediment in the same stratigraphic unit, located between two ages from 11.7 +/- 0.8 ka BP to 9.9 +/- 0.7 ka BP. Conclusions: These data allow us to suggest that the anthropomorphic figure is the oldest reliably dated figurative petroglyph ever found in the New World, indicating that cultural variability during the Pleistocene/Holocene boundary in South America was not restricted to stone tools and subsistence, but also encompassed the symbolic dimension.

Tracking the impact of translational research in psychiatry: state of the art and perspectives

Personalized treatments have become a primary goal in translational psychiatric research. They include the identification of neural circuits associated with psychiatric disorders and definition of treatment according to individual characteristics. Many new tools and technologies have been developed but further efforts are required to provide clues on how these scientific advances in psychiatry may be translated into more effective therapeutic approaches. Obstacles to the progress of translational psychiatry also involve numerous scientific, financial, ethical, logistics and regulatory aspects. Also, the goal of DSM-5 to expand “signs and symptoms” classification to incorporate biological measures may help the development of new multifactorial and dimensional models able to better understand the pathophysiology of psychiatric disorders and develop improved treatments. Finally, a better understanding on the significant response variability, cognitive functioning, role of comorbidities and treatment-resistant cases are critical for the development of prevention and intervention strategies that are more effective.

Ecological tools for assessing rock-art conservation in the Côa Valley Archaeological Park (V.N. Foz Côa, Northeast Portugal)

Centro de Investigação em Biodiversidade e Recursos Genéticos da Universidade do Porto. Departamento de Biologia, Faculdade de Ciências da Universidade do Porto. EscolaUniversitaria de Enxeñeria Forestal, Universidade de Vigo

The state of the art of limnology in the last decade

Universidad de Las Palmas de Gran Canaria. Facultad de Ciencias del Mar. Trabajo Fin de Título para la obtención del Graduado en Ciencias del Mar ; 2013-2014