From "Humanities and Computing" to "Digital Humanities": Digital Humanities in Portugal with a focus on Historical Research

In the following text I will develop three major aspects. The first is to draw attention to those who seem to have been the disciplinary fields where, despite everything, the Digital Humanities (in the broad perspective as will be regarded here) have asserted themselves in a more comprehensive manner. I think it is here that I run into greater risks, not only for what I have mentioned above, but certainly because a significant part, perhaps, of the achievements and of the researchers might have escaped the look that I sought to cast upon the past few decades, always influenced by my own experience and the work carried out in the field of History. But this can be considered as a work in progress and it is open to criticism and suggestions. A second point to note is that emphasis will be given to the main lines of development in the relationship between historical research and digital methodologies, resources and tools. Finally, I will try to make a brief analysis of what has been the Digital Humanities discourse appropriation in recent years, with very debatable data and methods for sure, because studies are still scarce and little systematic information is available that would allow to go beyond an introductory reflection.

Arboviral diseases in the Western Brazilian Amazon: a perspective and analysis from a tertiary health & research center in Manaus, State of Amazonas

The Fundação de Medicina Tropical Dr. Heitor Vieira Dourado (FMT-HVD), located in Manaus, the capital of the State of Amazonas (Western Brazilian Amazon), is a pioneering institution in this region regarding the syndromic surveillance of acute febrile illness, including arboviral infections. Based on the data from patients at the FMT-HVD, we have detected recurrent outbreaks in Manaus by the four dengue serotypes in the past 15 years, with increasing severity of the disease. This endemicity has culminated in the simultaneous circulation of all four serotypes in 2011, the first time this has been reported in Brazil. Between 1996 and 2009, 42 cases of yellow fever (YF) were registered in the State of Amazonas, and 71.4% (30/42) were fatal. Since 2010, no cases have been reported. Because the introduction of the yellow fever virus into a large city such as Manaus, which is widely infested by Aedes mosquitoes, may pose a real risk of a yellow fever outbreak, efforts to maintain an appropriate immunization policy for the populace are critical. Manaus has also suffered silent outbreaks of Mayaro and Oropouche fevers lately, most of which were misdiagnosed as dengue fever. The tropical conditions of the State of Amazonas favor the existence of other arboviruses capable of producing human disease. Under this real threat, represented by at least 4 arboviruses producing human infections in Manaus and in other neighboring countries, it is important to develop an efficient public health surveillance strategy, including laboratories that are able to make proper diagnoses of arboviruses.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Custos indirectos associados à obesidade em Portugal

RESUMO - A obesidade constitui um importante problema de saúde pública com consequências económicas de grande dimensão. Os obesos têm um risco acrescido de contrair doenças e de sofrer morte prematura devido a problemas como a diabetes, hipertensão arterial, AVC, insuficiência cardíaca e algumas neoplasias malignas. O presente estudo tem como objectivo estimar o custo económico indirecto (valor da produção perdida) associado à obesidade em Portugal no ano de 2002. O estudo adopta uma abordagem tipo custos da doença baseada na prevalência. Os dados são retirados do Inquérito Nacional de Saúde e estatísticas de rotina publicadas pelo INE e por outros organismos oficiais. Consideram-se como obesas pessoas com índice de massa corporal (IMC) ≥ 30 kg/m2 e estabelecem-se como limites etários para participação em actividades económicas produtivas as idades compreendidas entre os 15 e os 64 anos. A estratégia de imputação de custos ao factor de risco obesidade caracteriza- se por estimar, para a população portuguesa, as proporções de doença e morte prematura atribuíveis à obesidade e em multiplicar as estimativas populacionais encontradas pelo valor da produtividade económica potencial das pessoas afectadas. O custo indirecto total da obesidade em Portugal no ano de 2002 foi estimado em 199,8 milhões de euros. A mortalidade contribuiu com 58,4% deste valor (117 milhões de euros) e a morbilidade com 41,6% (83 milhões de euros). Os custos da morbilidade advêm de mais de 1,6 milhões de dias de incapacidade anuais, principalmente por faltas ao trabalho associadas a doenças do sistema circulatório e diabetes tipo II. Os custos da mortalidade são o resultado de 18 733 potenciais anos de vida activa perdidos, numa razão de 3 mortes masculinas por cada morte feminina. Os resultados indicam que a obesidade acarreta consideráveis perdas económicas para o país. Comparando os resultados com um estudo complementar que calculou os custos directos (em cuidados de saúde) da obesidade, verifica-se que a componente indirecta representa 40,2% do total dos custos da obesidade. A implementação de estratégias que prevenissem ou reduzissem a incidência e prevalência de obesidade em Portugal poderia gerar ganhos de produtividade elevados. Para conhecer a dimensão destes ganhos é necessária mais investigação sobre os benefícios clínicos e relação custo-efectividade de estratégias para a redução da obesidade.

The burden of chronic low back pain in the adult Portuguese population : an epidemiological population-based study under the scope of Epireumapt

RESUMO: Nos países desenvolvidos a lombalgia é a condição músculo-­‐esquelética mais prevalente. Quando evolui para um quadro crónico é responsável por um encargo económico bastante considerável, não só em relação aos indivíduos, mas também para a sociedade. A lombalgia crónica é por isso uma das principais causas de perda de produtividade e de perda de independência económica, nomeadamente através do absenteísmo (ausência do trabalho), do presenteísmo (perda de produtividade no trabalho, devido à capacidade diminuída provocada pela lombalgia) e da incapacidade para trabalhar (invalidez permanente, total ou parcial). Até à data, em Portugal, a prevalência e carga social da lombalgia crónica eram desconhecidas. Até agora não existiam estudos populacionais de grande dimensão sobre este tema. O objetivo principal desta tese foi determinar a prevalência de lombalgia crónica, e também avaliar a carga social que esta tem na população adulta Portuguesa. O trabalho de investigação foi desenvolvido no âmbito do Estudo Epidemiológico de Doenças Reumáticas em Portugal (EpiReumaPt). Este foi o primeiro estudo de larga escala e de base populacional, que determinou a prevalência de doenças reumáticas e músculo-­‐ esqueléticas na população adulta portuguesa. Foi realizado numa amostra aleatória e representativa, de 10.661 indivíduos do Continente, da Região Autónoma dos Açores e da Região Autónoma da Madeira, entre Setembro de 2011 e Dezembro de 2013. Esta tese foi dividida em duas secções. A primeira secção incluiu o detalhe das questões relativas ao desenvolvimento e gestão do EpiReumaPt, constituindo-­‐se como um guia prático sobre como realizar um estudo de base populacional de larga escala, em Portugal. A metodologia detalhada do EpiReumaPt foi também descrita nesta secção e incluiu os objectivos, o desenho do estudo, as características de recrutamento e a preparação de dados para análise. Nesta secção foram ainda descritos os principais resultados do EpiReumaPt. Estes evidenciaram que a lombalgia foi a condição músculo-­‐esquelética com maior prevalência na população adulta portuguesa.A segunda secção desta tese estimou a prevalência da lombalgia crónica ativa na população adulta Portuguesa, e avaliou a carga social esta condição. A lombalgia ativa foi definida com base na dor auto-­‐relatada no dia da entrevista e que persistia há pelo menos 90 dias (independentemente da causa). A lombalgia foi definida como dor na área definida entre a margem inferior das décimas segundas costelas até às pregas glúteas inferiores, com ou sem dor nos membros inferiores. A carga social foi medida tendo em conta os seguintes parâmetros: qualidade de vida, função, consumo de recursos de saúde, consumo de analgésicos e outros fármacos usados no alívio da dor, sintomas de ansiedade e sintomas de depressão. Os resultados mostraram que o consumo de recursos em saúde e a carga social da lombalgia crónica na população adulta Português é significativa. Também a incapacidade causada pela lombalgia crónica,nos indivíduos com idade ativa, é responsável por elevadas taxas de absenteísmo e má qualidade de vida, aos quais acresce o consequente ónus socioeconómico. Esta tese também concluiu que o consumo de analgésicos e outros medicamentos para alívio da dor, na população adulta portuguesa com lombalgia crónica ativa, é relativamente baixa. A maioria destes indivíduos não tomava nenhum medicamento analgésico, independentemente da intensidade da dor. Mesmo os indivíduos que reportaram dor intensa, apenas 4.0% estavam no primeiro degrau da escada analgésica da Organização Mundial de Saúde; 2.3% usavam opióides fracos e 0.03% usavam opióides fortes para controlar a dor (segundo e terceiro degrau da escada analgésica da Organização Mundial da Saúde). O trabalho de investigação também confirmou que a prevalência de sintomas de ansiedade e depressão entre os indivíduos adultos portugueses com lombalgia crónica ativa é elevada. Nestes indivíduos, registou-­‐se um consumo mais elevado de analgésicos e outros medicamentos para alívio da dor, quando comparados com os indivíduos com lombalgia crónica activa sem esses sintomas psicológicos. Os grupos terapêuticos mais utilizados foram os ansiolíticos, sedativos e hipnóticos, os antidepressivos e os anti-­‐inflamatórios não esteróides. A intensidade média da dor reportada foi também maior entre os indivíduos com lombalgia ativa e sintomas de ansiedade e/ou depressão. Também nestes, foi reportada pior função e pior estado de saúde. Em relação ao consumo de recursos de saúde foram encontradas diferenças significativas entre as duas populações: os indivíduos com lombalgia ativa e sintomas psicológicos concomitantes registaram maior número de consultas de psiquiatria de outras especialidades médicas, assim como precisaram de mais apoio domiciliário nos 12 meses prévios à entrevista do EpiReumaPt. Foram também identificados os fatores associados a sintomas isolados de ansiedade, a sintomas isolados de depressão e a sintomas de ansiedade e depressão. Resumindo,esta tese permitiu concluir que a lombalgia crónica é um problema de saúde comum na população adulta portuguesa, contribuindo para um elevado grau de incapacidade e que consequentemente afeta o desempenho laboral e o bem-­‐estar dos indivíduos. A lombalgia crónica é também responsável por um consumo considerável de recursos de saúde. Acresce ainda que os sintomas de ansiedade e depressão são comuns, entre os indivíduos com lombalgia crónica, contribuindo com uma carga social adicional.---------------------------------- ABSTRACT:Low Back Pain(LBP) is the most prevalent of musculoskeletal condition in developed countries.When it becomes chronic, LBP causesan enormous economic burden on individuals and society -­‐ it is one of the leading causes of loss of productivity and economic independence through absenteeism (time off work), presenteeism (lost productivity because of diminished capacity while at work) and work disability (permanent, partial or complete disablement for work purposes). In Portugal the prevalence and burden of LBP and chronic LBP (CLBP) were poorly defined. Until now no large population-­‐based studies have focused on this. The main aim of this thesis was to determine the prevalence of LBP and CLBP, and also to assess the burden of CLBP in the adult rtuguese population. The research work was developed under the scope of EpiReumaPt (the Portuguese Epidemiologic Study of Rheumatic Diseases). EpiReumaPt was the first national large population-­‐based and prevalence study of rheumatic and musculoskeletal diseases (RMD). It was performed among a randomized and representative sample of 10,661 adult Portuguese subjects recruited in Mainland, Azores and Madeira Islands, from September 2011 to December 2013. The first section of this thesis included detailed issues regarding the development and management of EpiReumaPt, and provided a practical guide on how to set-­‐up a large population-­‐based study in Portugal. The detailed methodology of EpiReumaPt, including its objectives,study design,recruitment features,and data preparation for analyses were also described. The main results from EpiReumaPt study were provided in this section and showed that LBP was the musculoskeletal condition with highest prevalence among Portuguese population. The second section of this thesis estimated the prevalence of active CLBP among adult Portuguese population, and assessed the social burden of this condition. Active CLBP was defined based on self-­‐reported pain on the day of the interview, and for most of the time for at least 90 days (independently from cause). LBP was defined as pain in the back area from the lower margin of the twelfth ribs to he lower gluteal folds, with or without pain referred to the lower limbs. Social burden was measured taking into account the following outcomes: quality of life, function, healthcare resources consumption, analgesic and other pain relief drugs intake, anxiety and depression symptoms. Results showed that the healthcare consumption and social burden of CLBP among adult Portuguese population were enormous, and the disability caused by CLBP among subjects in a working age provides high rates of absenteeism (work loss) and poor quality of life, with a consequent socioeconomic burden. This thesis also concluded that analgesic and other pain relief drugs untake among adult Portuguese population with active CLBP was very low. Most of the subjects with active CLBP did not take any analgesic drug regardless pain severity. Even when subjects self-­‐reported severe pain, only 24.0% were in the 1st step of the analgesic ladder,2.3% used weak analgesic opioids and 0.03% used strong opioids (2nd and 3rd step of WHO analgesic ladder, respectively) to control pain . The research work also confirmed that the prevalence of anxiety and depression symptoms among adult Portuguese subjects with active CLBP was high. Regarding pharmacological therapy, the intake of analgesic and other pain relief drugs was higher among subjects with anxiety and/or depression symptoms, when compared with subjects without these psychological symptoms. Anxiolytics, sedatives and hypnotics, antidepressants and NSAIDs intake had higher usage rates among these subjects. The pain severity mean was also higher among this subjects and function and health status was worse. Regarding healthcare resources consumption,significant differences between the two populations were found. Subjects with ctive CLBP and concomitant psychological symptoms had a higher number of psychiatrist and other physician visits. They also needed more home care in the previous 12 months. Factors associated with isolated symptoms of anxiety, depression,and concomitant anxiety and depression symptoms were also identified. Summarizing, we concluded that CLBP is a common health problem among adult Portuguese population contributing to disability and affecting labor performance, and the well being of subjects. it is also responsible for considerable healthcare resource consumption. Anxiety and depression symptoms are common among subjects with CLBP and provided an additional burden among them.

A comunicação intercultural ao nível da intervenção pedagógica no ensino do português como língua estrangeira a alunos chineses na China

A globalização aproxima os povos: o mundo chinês e o mundo português nunca tiveram uma relação tão estreita como a atual. Apesar de os portugueses terem ido os primeiros ocidentais a entrar na China com a chegada de Jorge Álvares a uma ilha chinesa, em 1513, e os últimos ocidentais a deixar o governo de um território chinês, com a transferência da administração portuguesa de Macau para a China a 20 de dezembro de 1999, nunca haviam sido registados, nos últimos séculos, grandes contatos ou intercâmbios comerciais e culturais entre a China e Portugal e entre o mundo chinês e o mundo lusófono, em comparação com os contatos entre o mundo chinês e outros mundos ocidentais: como o inglês, o francês, o alemão e o espanhol. Os objetivos gerais desta investigação são três: 1 - Reconhecer o papel do desenvolvimento da competência omunicativa intercultural no contexto do ensino-aprendizagem do português como LE na China. 2 - Promover o desenvolvimento da competência comunicativa intercultural dos alunos chineses no processo de aprendizagem da língua portuguesa na China. 3 - Analisar os métodos pedagógicos e de integração curricular para apoiar e desenvolver um ensino mais eficaz do português como LE na China. O desenvolvimento do nosso trabalho articula-se em duas áreas científicas: Ciências da Linguagem e Ciências da Educação. A abordagem metodológica utilizada é o estudo de caso, com recolha de dados primários realizada através de questionários, entrevistas e observação participante em profundidade, que permitiu a confirmação e/ou refutação das hipóteses levantadas, privilegiando a metodologia qualitativa. Os resultados permitem estabelecer uma relação significativa, do ponto de vista pedagógico, entre a comunicação intercultural na educação e as práticas pedagógicas desenvolvidas no ensino do português como língua estrangeira na China. Contudo e de acordo com a nossa pesquisa, o maior problema que impede as práticas pedagógicas para desenvolver as competências comunicativas no ensino, é a falta de materiais didáticos com estrutura para elaborar um programa de atividades coerentes e complementares nas aulas.

Development of human central nervous system 3D in vitro models for preclinical research

Neurological disorders are a major concern in modern societies, with increasing prevalence mainly related with the higher life expectancy. Most of the current available therapeutic options can only control and ameliorate the patients’ symptoms, often be-coming refractory over time. Therapeutic breakthroughs and advances have been hampered by the lack of accurate central nervous system (CNS) models. The develop-ment of these models allows the study of the disease onset/progression mechanisms and the preclinical evaluation of novel therapeutics. This has traditionally relied on genetically engineered animal models that often diverge considerably from the human phenotype (developmentally, anatomically and physiologically) and 2D in vitro cell models, which fail to recapitulate the characteristics of the target tissue (cell-cell and cell-matrix interactions, cell polarity). The in vitro recapitulation of CNS phenotypic and functional features requires the implementation of advanced culture strategies that enable to mimic the in vivo struc-tural and molecular complexity. Models based on differentiation of human neural stem cells (hNSC) in 3D cultures have great potential as complementary tools in preclinical research, bridging the gap between human clinical studies and animal models. This thesis aimed at the development of novel human 3D in vitro CNS models by integrat-ing agitation-based culture systems and a wide array of characterization tools. Neural differentiation of hNSC as 3D neurospheres was explored in Chapter 2. Here, it was demonstrated that human midbrain-derived neural progenitor cells from fetal origin (hmNPC) can generate complex tissue-like structures containing functional dopaminergic neurons, as well as astrocytes and oligodendrocytes. Chapter 3 focused on the development of cellular characterization assays for cell aggregates based on light-sheet fluorescence imaging systems, which resulted in increased spatial resolu-tion both for fixed samples or live imaging. The applicability of the developed human 3D cell model for preclinical research was explored in Chapter 4, evaluating the poten-tial of a viral vector candidate for gene therapy. The efficacy and safety of helper-dependent CAV-2 (hd-CAV-2) for gene delivery in human neurons was evaluated, demonstrating increased neuronal tropism, efficient transgene expression and minimal toxicity. The potential of human 3D in vitro CNS models to mimic brain functions was further addressed in Chapter 5. Exploring the use of 13C-labeled substrates and Nucle-ar Magnetic Resonance (NMR) spectroscopy tools, neural metabolic signatures were evaluated showing lineage-specific metabolic specialization and establishment of neu-ron-astrocytic shuttles upon differentiation. Chapter 6 focused on transferring the knowledge and strategies described in the previous chapters for the implementation of a scalable and robust process for the 3D differentiation of hNSC derived from human induced pluripotent stem cells (hiPSC). Here, software-controlled perfusion stirred-tank bioreactors were used as technological system to sustain cell aggregation and dif-ferentiation. The work developed in this thesis provides practical and versatile new in vitro ap-proaches to model the human brain. Furthermore, the culture strategies described herein can be further extended to other sources of neural phenotypes, including pa-tient-derived hiPSC. The combination of this 3D culture strategy with the implemented characterization methods represents a powerful complementary tool applicable in the drug discovery, toxicology and disease modeling.

The impact of in-store activations (communication) in the consumer's emotions

Consumer behavior: Sport Zone. The analysis of "The impact of in-store activations (communication) in the consumer's emotions" Several studies have been conducted on the consumer behavior. This study aims to analyze and understand which factors are important to consumers’ emotions when the purchase decision occurs, the brand awareness, brand loyalty and the campaigns/activations’ impact in the above factors. Two research surveys were conducted to realize this study, the first online and the other was an interview to the Agency Up Partner who conceived and put into practice this Fitness campaign. First of all, was the consumer’s survey, a survey with 100 answers, to understand which factors are taken into account when a campaign in-store is held, in which the atmosphere is mainly used to arouse consumer’s desire to purchase, and also emotions. Second, the interview with the agency was realized to find out on what they were based on when they delineate it, and if the raise of emotions was taken into account in the origin of it. Concluding, emotions have a significant impact on formation of consumer in-store behavior, satisfaction and loyalty. As we could assay through of how this Fitness campaign was carried out as well as the optimal feedback received by consumers, improved attention over in-store marketing activity strongly influences consumer behavior at the point of purchase. “Sport Zone: A new store concept where the love for sports is combined with functionality”

Bibliotecas públicas, responsabilidade social e cidadania

Este trabalho de investigação visa estudar e compreender a responsabilidade social de três bibliotecas públicas da margem sul do Tejo, analisando de que forma estas contribuem para o desenvolvimento de cidadãos civicamente mais ativos. Neste sentido, determina-se que modelo de responsabilidade social aplicam, que meios utilizam para incentivar o envolvimento cívico e que parcerias estabelecem. O método de recolha de dados utilizado foi a entrevista, tendo esta sido realizada aos responsáveis de cada bibliotecas em análise. Os resultados evidenciam que não existe uma política formal de responsabilidade social, mas sim ações que se assemelham a modelos práticos de RS que se classificam nas Teorias Integrativas. Relativamente às iniciativas desenvolvidas pelas bibliotecas públicas para a promoção da cidadania, estas vão de encontro ao Manifesto da IFLA/UNESCO para as Bibliotecas Públicas, podendo dizer-se que as suas ações se encontram confinadas à responsabilidade legal da organização. As bibliotecas identificam os seus stakeholders, mas é necessário que estes possuam um papel mais ativo no desenvolvimento de iniciativas que respondam às suas expetativas e necessidades. Efetuam-se cinco recomendações para melhorar o desempenho das bibliotecas públicas no domínio da responsabilidade social e da cidadania: implementar políticas de responsabilidade social; respeitar os interesses dos stakeholders; apostar na formação em responsabilidade social; investir na aprendizagem ao longo da vida; e inovar, no sentido de desenvolver atividades que vão além do cumprimento do Manifesto da IFLA/UNESCO para as Bibliotecas Públicas.

Research posters’ eBook: according to 1st WORKSHOP with “Focus on experimental testing of cement based materials”

COST Action TU 1404

Exploring the potentialities of a new type of CFRP laminate for the simultaneous flexural and shear strengthening of RC beams: numerical research

This study aims to develop an innovative carbon fibre reinforced polymer (CFRP) laminate with a U configuration to address strengthening interventions, where the increment of both flexural and shear capacity of reinforced concrete (RC) elements is required. This strengthening solution combines the near surface mounted (NSM) and embedded through section (ETS) techniques in the same application, since these techniques have already evidenced high performance on flexural and shear strengthening of RC beams using FRP systems, respectively. In fact, the proposed hybrid technique aims to mobilize the advantages provided by these two strengthening techniques by using an innovative CFRP laminate. The strengthening efficacy of this new hybrid NSM/ETS technique was numerically assessed and compared to the corresponding efficiency of NSM and ETS techniques applied separately for the flexural and shear strengthening of RC beams, respectively. The numerical models are described and the main relevant results are presented and discussed.

High performance fiber reinforced concrete for the shear reinforcement: experimental and numerical research

High performance fiber reinforced concrete (HPFRC) is developing rapidly to a modern structural material with unique rheological and mechanical characteristics. Despite applying several methodologies to achieve self15 compacting requirements, some doubts still remain regarding the most convenient strategy for developing a HPFRC. In the present study, an innovative mix design method is proposed for the development of high17 performance concrete reinforced with a relatively high dosage of steel fibers. The material properties of the developed concrete are assessed, and the concrete structural behavior is characterized under compressive, flexural and shear loading. This study better clarifies the significant contribution of fibers for shear resistance of concrete elements. This paper further discusses a FEM-based simulation, aiming to address the possibility of calibrating the constitutive model parameters related to fracture modes I and II.

Assessment of the effectiveness of steel fibre reinforcement for the punching resistance of flat slabs by experimental research and design approach

The present paper deals with the experimental assessment of the effectiveness of steel fibre reinforcement in terms of punching resistance of centrically loaded flat slabs, and to the development of an analytical model capable of predicting the punching behaviour of this type of structures. For this purpose, eight slabs of 2550 x 2550 x 150 mm3 dimensions were tested up to failure, by investigating the influence of the content of steel fibres (0, 60, 75 and 90 kg/m3) and concrete strength class (50 and 70 MPa). Two reference slabs without fibre reinforcement, one for each concrete strength class, and one slab for each fibre content and each strength class compose the experimental program. All slabs were flexurally reinforced with a grid of ribbed steel bars in a percentage to assure punching failure mode for the reference slabs. Hooked ends steel fibres provided the unique shear reinforcement. The results have revealed that steel fibres are very effective in converting brittle punching failure into ductile flexural failure, by increasing both the ultimate load and deflection, as long as adequate fibre reinforcement is assured. An analytical model was developed based on the most recent concepts proposed by the fib Mode Code 2010 for predicting the punching resistance of flat slabs and for the characterization of the behaviour of fibre reinforced concrete. The most refined version of this model was capable of predicting the punching resistance of the tested slabs with excellent accuracy and coefficient of variation of about 5%.

Risk assessment in a research laboratory during sol–gel synthesis of nano-TiO2

The occupational risks in the nanotechnology research laboratories are an important topic since a great number of researchers are involved in this area. The risk assessment performed by both qualitative and quantitative methods is a necessary step for the management of the occupational risks. Risk assessment could be performed by qualitative methods that gather consensus in the scientific community. It is also possible to use quantitative methods, based in different technics and metrics, as indicative exposure limits are been settled by several institutions. While performing the risk assessment, the information on the materials used is very important and, if it is not updated, it could create a bias in the assessment results. The exposure to TiO2 nanoparticles risk was assessed in a research laboratory using a quantitative exposure method and qualitative risk assessment methods. It was found the results from direct-reading Condensation Particle Counter (CPC) equipment and the CB Nanotool seem to be related and aligned, while the results obtained from the use of the Stoffenmanager Nano seem to indicate a higher risk level.