The surface electromyography-force relationship during isometric dorsiflexion in males and females

This study evaluated sex-related differences in the tibialis anterior (TA) surface electromyography (EMG) to force relationship. One-hundred participants (50 males and 50 females) performed three isometric contractions at 20, 40, 60, 80, and 100% of maximal voluntary contraction (MVC) in an apparatus designed to isolate the action of the dorsiflexors. The surface EMG signal was amplified (lOOOx), band-pass filtered (10-500Hz), and sampled at 2048 Hz. The load cell signal was low-passed filtered at 100 Hz and sampled at the same rate. Males were stronger than females {P <0.05). However, there was no significant difference in root-mean-square (RMS) values between sexes {P <0.05). Both sexes exhibited a quadratic increase in RMS across force levels (P <0.05). The mean power frequency (MNF) for males was greater than for females {P <0.05). Males and females exhibited a linear increase in both frequency measures up to 80% of MVC (P <0.05). Between 80 and 100% MVC, the frequency values for the females plateaued while males showed a decrease {P <0.05). The magnitude of the difference in MNF between males and females was consistent with sex-specific TA physiology. In general, the pattern of means for RMS and MNF between males and females revealed no sex-related differences in the surface EMG/force relationship. We therefore conclude that there are no sex-related differences in the gradation of muscle force.

Force potentiation in the MDX mouse

Large forces are the primary mechanism of injury in muscular dystrophy, and muscular dystrophy is especially damaging to type IIB muscle fibers. It was hypothesized that post-tetanic potentiation (PTP) would be down-regulated to prevent damage in Xlinked muscular dystrophy (mdx) mice since PTP increases force and PTP effects are greatest in IIB fibers. PTP experiments were performed on the extensor digitorum longus (EDL) of 50 day old mdx (YM) and C57BL/10 (YC) mice and 10 month old mdx (OM) and C57B1710 (OC) mice. Twitch and tetanic forces were lower in mdx than controls and lower in younger than older mice. Contrary to the hypothesis, PTP was higher in both mdx groups compared to controls. OM potentiated more than any other condition (OM: 29.8%, OC: 23.2%, YM: 21.9%, YC: 17.2%). In accordance with literature PTP increased in the older groups. To explain PTP changes, fiber typing and Western blots for myosin light chain kinase (MLCK) were performed. YM and YC had similar fiber type profiles (2% I, 58% IIX/D and 40% IIB). In accordance with literature but contrary to expected conditions for elevated PTP, OM had a slower fiber type profile (1.7% I, 69% IIX/D and 29% IIB) than OC (0.4% I, 61% IIX/D and 38% IIB). No differences were found in MLCK expression. It seems that PTP is up-regulated to maintain muscle function rather than being down-regulated to prevent muscle damage. Ca""^ transient and myosin phosphorylation measurements would be beneficial in explaining increased PTP seen in this study.

Plant rhizosphere specificity and variability in the insect and plant adhesins, Madl and Mad2, within the genus Metarhizium suggest plant adaptation as an evolutionary force

Metarhizium is a soil-inhabiting fungus currently used as a biological control agent against various insect species, and research efforts are typically focused on its ability to kill insects. In section 1, we tested the hypothesis that species of Metarhizium are not randomly distributed in soils but show plant rhizosphere-specific associations. Results indicated an association of three Metarhizium species (Metarhizium robertsii, M. brunneum and M. guizhouense) with the rhizosphere of certain types of plant species. M. robertsii was the only species that was found associated with grass roots, suggesting a possible exclusion of M. brunneum and M. guizhouense, which was supported by in vitro experiments with grass root exudate. M. guizhouense and M. brunneum only associated with wildflower rhizosphere when co-occurring with M. robertsii. With the exception of these co-occurrences, M. guizhouense was found to associate exclusively with the rhizosphere of tree species, while M. brunneum was found to associate exclusively with the rhizosphere of shrubs and trees. These associations demonstrate that different species of Metarhizium associate with specific plant types. In section 2, we explored the variation in the insect adhesin, Madl, and the plant adhesin, Mad2, in fourteen isolates of Metarhizium representing seven different species. Analysis of the transcriptional elements within the Mad2 promoter region revealed variable STRE, PDS, degenerative TATA box, and TATA box-like regions. Phylogenetic analysis of 5' EF-Ia, which is used for species identification, as well as Madl and Mad2 sequences demonstrated that the Mad2 phylogeny is more congruent with 5' EF-1a than Madl. This suggests Mad2 has diverged among Metarhizium lineages, contributing to clade- and species-specific variation. While other abiotic and biotic factors cannot be excluded in contributing to divergence, it appears that plant associations have been the driving factor causing divergence among Metarhizium species.

Variability in the Insect and Plant Adhesins, Mad1 and Mad2, within the Fungal Genus Metarhizium Suggest Plant Adaptation as an Evolutionary Force

Several species of the insect pathogenic fungus Metarhizium are associated with certain plant types and genome analyses suggested a bifunctional lifestyle; as an insect pathogen and as a plant symbiont. Here we wanted to explore whether there was more variation in genes devoted to plant association (Mad2) or to insect association (Mad1) overall in the genus Metarhizium. Greater divergence within the genus Metarhizium in one of these genes may provide evidence for whether host insect or plant is a driving force in adaptation and evolution in the genus Metarhizium. We compared differences in variation in the insect adhesin gene, Mad1, which enables attachment to insect cuticle, and the plant adhesin gene, Mad2, which enables attachment to plants. Overall variation for the Mad1 promoter region (7.1%), Mad1 open reading frame (6.7%), and Mad2 open reading frame (7.4%) were similar, while it was higher in the Mad2 promoter region (9.9%). Analysis of the transcriptional elements within the Mad2 promoter region revealed variable STRE, PDS, degenerative TATA box, and TATA box-like regions, while this level of variation was not found for Mad1. Sequences were also phylogenetically compared to EF-1a, which is used for species identification, in 14 isolates representing 7 different species in the genus Metarhizium. Phylogenetic analysis demonstrated that the Mad2 phylogeny is more congruent with 59 EF-1a than Mad1. This would suggest that Mad2 has diverged among Metarhizium lineages, contributing to clade- and species-specific variation, while it appears that Mad1 has been largely conserved. While other abiotic and biotic factors cannot be excluded in contributing to divergence, these results suggest that plant relationships, rather than insect host, have been a major driving factor in the divergence of the genus Metarhizium.

Variability in the Insect and Plant Adhesins, Mad1 and Mad2, within the Fungal Genus Metarhizium Suggest Plant Adaptation as an Evolutionary Force

Several species of the insect pathogenic fungus Metarhizium are associated with certain plant types and genome analyses suggested a bifunctional lifestyle; as an insect pathogen and as a plant symbiont. Here we wanted to explore whether there was more variation in genes devoted to plant association (Mad2) or to insect association (Mad1) overall in the genus Metarhizium. Greater divergence within the genus Metarhizium in one of these genes may provide evidence for whether host insect or plant is a driving force in adaptation and evolution in the genus Metarhizium. We compared differences in variation in the insect adhesin gene, Mad1, which enables attachment to insect cuticle, and the plant adhesin gene, Mad2, which enables attachment to plants. Overall variation for the Mad1 promoter region (7.1%), Mad1 open reading frame (6.7%), and Mad2 open reading frame (7.4%) were similar, while it was higher in the Mad2 promoter region (9.9%). Analysis of the transcriptional elements within the Mad2 promoter region revealed variable STRE, PDS, degenerative TATA box, and TATA box-like regions, while this level of variation was not found for Mad1. Sequences were also phylogenetically compared to EF-1a, which is used for species identification, in 14 isolates representing 7 different species in the genus Metarhizium. Phylogenetic analysis demonstrated that the Mad2 phylogeny is more congruent with 59 EF-1a than Mad1. This would suggest that Mad2 has diverged among Metarhizium lineages, contributing to clade- and species-specific variation, while it appears that Mad1 has been largely conserved. While other abiotic and biotic factors cannot be excluded in contributing to divergence, these results suggest that plant relationships, rather than insect host, have been a major driving factor in the divergence of the genus Metarhizium.

Canadian Expeditionary Force Death Certificate - Samuel DeVeaux Woodruff

Canadian Expeditionary Force Death Certificate stating that Samuel DeVeaux Woodruff was killed in action on the 13th of July, 1918, dated Sept. 20, 1919.

Force potentiation as a modulator of contractile performance: Implications for control of skeletal muscle force and energetics of work

This thesis investigated the modulation of dynamic contractile function and energetics of work by posttetanic potentiation (PTP). Mechanical experiments were conducted in vitro using software-controlled protocols to stimulate/determine contractile function during ramp shortening, and muscles were frozen during parallel incubations for biochemical analysis. The central feature of this research was the comparison of fast hindlimb muscles from wildtype and skeletal myosin light chain kinase knockout (skMLCK-/-) mice that does not express the primary mechanism for PTP: myosin regulatory light chain (RLC) phosphorylation. In contrast to smooth/cardiac muscles where RLC phosphorylation is indispensable, its precise physiological role in skeletal muscle is unclear. It was initially determined that tetanic potentiation was shortening speed dependent, and this sensitivity of the PTP mechanism to muscle shortening extended the stimulation frequency domain over which PTP was manifest. Thus, the physiological utility of RLC phosphorylation to augment contractile function in vivo may be more extensive than previously considered. Subsequent experiments studied the contraction-type dependence for PTP and demonstrated that the enhancement of contractile function was dependent on force level. Surprisingly, in the absence of RLC phosphorylation, skMLCK-/- muscles exhibited significant concentric PTP; consequently, up to ~50% of the dynamic PTP response in wildtype muscle may be attributed to an alternate mechanism. When the interaction of PTP and the catchlike property (CLP) was examined, we determined that unlike the acute augmentation of peak force by the CLP, RLC phosphorylation produced a longer-lasting enhancement of force and work in the potentiated state. Nevertheless, despite the apparent interference between these mechanisms, both offer physiological utility and may be complementary in achieving optimal contractile function in vivo. Finally, when the energetic implications of PTP were explored, we determined that during a brief period of repetitive concentric activation, total work performed was ~60% greater in wildtype vs. skMLCK-/- muscles but there was no genotype difference in High-Energy Phosphate Consumption or Economy (i.e. HEPC: work). In summary, this thesis provides novel insight into the modulatory effects of PTP and RLC phosphorylation, and through the observation of alternative mechanisms for PTP we further develop our understanding of the history-dependence of fast skeletal muscle function.

Engineer force employed in the surveying ditch in marsh lands to the 23rd of February inclusive

Engineer force employed in the surveying ditch in marsh lands to the 23rd of February inclusive. This is signed by S.D. Woodruff, March 8, 1855.

L’autorisation de recourir à la force accordée par le Conseil de sécurité des Nations Unies

L’autorisation de recourir à la force est une pratique par laquelle le Conseil de sécurité permet à des États membres des Nations Unies ou à des accords ou organismes régionaux, voire au Secrétaire général des Nations Unies de recourir à la coercition militaire. Elle est l’une des circonstances excluant l’illicéité face à l’interdiction de recourir à la force dans les relations internationales dont la règle est posée à l’article 2,§ 4 de la Charte des Nations Unies. Il est évident que cette pratique ne correspond pas clairement à la lettre de la Charte mais elle tire sa légitimité du fait qu’elle permet au Conseil de sécurité de s’acquitter de sa mission principale de maintien de la paix et de la sécurité internationales, étant donné que le système de coercition militaire prévu par la Charte s’avère inapplicable dans la pratique. Il reste que cette pratique est empreinte d’ambiguïté : elle apparaît tantôt comme une intervention des Nations Unies, tantôt comme une action unilatérale au profit de certaines puissances capables de mener des opérations de grande envergure. Cette ambiguïté est encore exacerbée par le problème de l’autorisation présumée que certainsÉtats pourraient déduire des actes du Conseil de sécurité, pour intervenir dans divers conflits. Dans les faits, la pratique de l’autorisation de recourir à la force semble actualiser une tendance belliciste qui caractérisait les époques antérieures. Elle peut, si l’on n’y prend garde, refondre, par pans entiers, les legs du droit contre la guerre (jus contra bellum) issu du XXème siècle, droit qui a été le fruit de longues tribulations dans l’histoire des relations internationales. Le danger le plus grave est que des acquis chèrement négociés risquent d’être jetés par-dessus bord avec trop de facilité et sans délai, pour servir des visées à court terme.

The effect of social capital in women's participation in the labor force in México : a neighborhood in Monterrey.

Tesis (Doctor of Philosophy) The University of Texas at Arlington, 2007

Étude qualitative de la force mentale menée auprès d’athlètes québécois francophones de niveau universitaire

L’objectif de cette étude était d’obtenir une meilleure compréhension du concept de force mentale appliqué dans un contexte sportif. Pour se faire, des entrevues ont été réalisées avec dix athlètes québécois francophones de niveau universitaire. L’analyse des données s’est effectuée en suivant les principes de la version abrégée de la théorisation ancrée. Les résultats appuient globalement la littérature scientifique. En somme, la force mentale serait composée de caractéristiques de base interreliées, telles que la motivation internalisée, la confiance en soi, la maturité et la détermination. La force mentale serait sollicitée non seulement lorsque l’athlète fait face à des situations difficiles comme l’adversité, mais également lorsque le contexte dans lequel il évolue est exempt de complications (à l’entraînement ou lors de victoire). Les résultats des entrevues indiquent que face à ces deux types de situation, les athlètes forts mentalement possèderaient un mode réactionnel tridimensionnel (dimension cognitive, affective et comportementale) se caractérisant par la gestion et le contrôle de l’attention, l’interprétation optimiste des situations, le contrôle de l’activation et du langage corporel, la gestion des émotions et la résilience. Contrairement à la littérature, les résultats suggèrent que la force mentale ne serait pas nécessairement liée aux athlètes performants au plus haut niveau de leur sport, mais à la capacité des athlètes à donner de bonnes performances en fonction de leur potentiel individuel. Cette étude constitue le premier pas vers le développement d’un instrument de mesure permettant d’évaluer le niveau de force mentale chez les athlètes francophones.

Synthèse de brosses de polyélectrolytes par polymérisation initiée depuis une surface de mica et étude de leur réponse en fonction du pH et de la force ionique

Cette thèse rapporte le greffage chimique de brosses de polymères neutres de poly(acrylate de tert-butyle) (PtBA) et de brosses chargées d’acide polyacrylique (PAA) sur des substrats de mica afin d’étudier leur conformation en fonction de la densité de greffage, du pH et de la force ionique. Le greffage est réalisé par polymérisation contrôlée par transfert d’atome (ATRP) initiée depuis la surface de mica afin de contrôler la croissance du polymère et sa densité de greffage. L’étude de la conformation des brosses de PtBA et de PAA a été menée avec la technique AFM en mesurant les épaisseurs des films à sec et gonflés sous différentes conditions de solvant, de pH et de force ionique. Une monocouche d’amorceurs est tout d’abord greffée sur du mica porteur de groupes hydroxyles créés par plasma (Ar/H2O). Cette couche a été caractérisée par des mesures d’angle de contact et par la technique TOF-SIMS. L’amorceur greffé a ensuite permis d’initier l’ATRP directement depuis la surface pour former des brosses neutres de PtBA liés de façon covalente au mica. La croissance linéaire de l’épaisseur du film avec la masse molaire du polymère en solution et le taux de conversion montre que la polymérisation est contrôlée. De plus, la ré-initiation des chaînes greffées atteste du caractère vivant de la polymérisation. L’hydrolyse des brosses de PtBA, confirmée par des mesures d’angle de contact, d’épaisseur et par FT-IR, conduit à des brosses de PAA. Les différentes couches greffées sont stables à l’air, en milieu organique et en milieu aqueux et leur gonflement est réversible. Le degreffage de la couche de PAA est observé suite à une longue exposition à pH basique. Cette étude représente le premier exemple de brosses greffées chimiquement sur du mica par polymérisation initiée depuis la surface. La variation des paramètres de la réaction de greffage de l’amorceur, tels que la concentration et la durée de réaction, a permis de contrôler le taux de recouvrement de l’amorceur et la densité de greffage du polymère. Une grande gamme de taux de recouvrement de l’amorceur est accessible et se traduit par un intervalle de densités de greffage allant de faibles à élevées (e.g. 0,04 chaîne/nm2 à 0,5 chaîne/nm2). L’étude de la conformation des chaînes de PtBA dans le DMF montre que cet intervalle de densités recouvre le régime crêpe au régime brosse. Le gonflement de brosses de PAA et la variation de la hauteur de la brosse L ont été étudiés en fonction de la densité de greffage, du pH et du sel ajouté cs (NaCl). Une transition brusque de collapsée à étirée est observée avec l’augmentation du pH, indépendamment de la densité de greffage. A pH neutre, les brosses sont collapsées et se comportent comme des brosses neutres en mauvais solvant. A pH basique, les brosses sont gonflées et chargées et se trouvent dans un régime de Pincus caractéristique des polyélectrolytes forts. En présence de sel, les charges sont partiellement écrantées et les répulsions électrostatiques dominent toujours dans la brosse. Cette étude contribue à une meilleure compréhension du comportement complexe des brosses de polyélectrolytes faibles et apporte un soutien expérimental à la théorie sur le comportement de ces brosses.