925 resultados para Indole-3-acetic-acid Levels
Resumo:
INTRODUCTION: Studies which verified the effects of physical exercise on oxidative stress biomarkers and its relation to muscle glycogen are lack. OBJECTIVE: The present study verified the effects of aerobic swimming training (AST) on biomarkers of oxidative stress, glycogen content and cell growth in the skeletal muscle of rats. METHODS: Eighteen male Wistar rats (60 days) were divided into two groups: Sedentary Group (SG; n = 10): sedentary rats; and Trained Group (TG; n = 8): rats subjected to AST (5.0% of body weight), 1h/day, 5x/week, during 8 weeks. The activity of antioxidant enzymes (AOE) superoxide dismutase (SOD; U/ml), catalase (CAT; µmol/min/100mg), glutathione peroxidase (GPx; nmol/min/100mg), and substances that react with thiobarbituric acid levels (TBARs; nmolMDA/mg protein) were determined in the right gastrocnemius muscle. Glycogen (mg/100mg), protein (g/100g), and DNA (g/100g) contents were evaluated in the left gastrocnemius muscle. Data were analyzed by Student t-test (p < 0.05). RESULTS: AOE activity was higher in the TG group (CAT: 0.87 ± 0.04; SOD: 6.49 ± 0.45; GPX: 6.49 ± 0.52) when compared to SG group (CAT: 0.52 ± 0.03; SOD: 4.10 ± 0.37; GPx: 2.87 ± 0.35). TBARs levels was lower in TG (TG: 2.35 ± 0.45; SG: 8.90 ± 0.47). Gastrocnemius glycogen content (SG: 0.108 ± 0.013; TG: 0.320 ± 0.012) and protein/DNA ratio (SG: 24.94 ± 3.25; TG: 41.68 ± 4.02) were higher in TG group. CONCLUSION: Altogether, these data provide evidence that AST improved antioxidant defense, which may be associated to higher glycogen content of skeletal muscle of the animals.
Resumo:
The objective of this study was to evaluate the supplementation of linseed as an omega-3 fatty acid supplier on the functional capacity of jumping horses. 6 horses disposed in two 3 x 3 balanced Latin squares were used. The treatments consisted of increasing levels of linseed mixed with flour and linseed oil in a ratio of 75:25, respectively, resulting in 0g (control), 60g and 120g on a daily basis per horse. The horses were supplemented for 30 days. Physical activity was jumping at riding class level. The functional parameters measured were lameness index, stride length and joint metacarpophalangeal (MCP) biometry (circumference and flexion angle). A significant linseed supplementation effect for doses of 60 and 120g was observed on the lameness index. Feeding 120g of linseed increased stride length while trotting (P<0.05). An increment of 0.5cm on MCP circumference was found in horses that received the control diet when compared to those horses that consumed 120g of linseed. Thus, supplementation of jumping horses with 120g/day of linseed promoted greater stride length at a trot and reduced swelling in the metacarpophalangeal joint, improving their functional capabilities.
Resumo:
Pós-graduação em Química - IQ
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective of this study was to determine the effect of applying fibrolytic enzymes at ensiling, either alone or in combination with a ferulic acid esterase-producing bacterial silage inoculant, on the silage conservation characteristics and nutritive value of alfalfa (Medicago sativa L). Second-cut alfalfa (340 g DM/kg fresh crop) was harvested, wilted, chopped and sub-sampled into 24 batches. Samples were randomly allocated in triplicate to one of four enzyme product treatments supplying endoglucanases and xylanases: none (control), EN1, EN2, EN3; applied alone or in combination with a ferulic acid esterase-producing silage inoculant (FAEI). Treatments were arranged in a 4 x 2 factorial design. All enzyme treatments were applied at 2 ml enzyme product/kg herbage DM, and inoculant was applied at 1 x 10(5) cfu/g fresh herbage. Samples were packed into laboratory-scale silos and stored for 7, 27 or 70 days, and analysed for dry matter (DM) losses, aerobic stability, chemical composition and in vitro ruminal degradability. The use of enzymes did not affect (P>0.05) ensilage DM losses or lactic or acetic acid concentrations after 70 days of ensilage, compared to the control silage. Silage produced using EN1 had lesser neutral detergent fibre (aNDF, P=0.046) and acid detergent fibre (ADF; P=0.006) concentrations than control silage. However, no difference (P>0.05) was observed between the control silage and silage produced with EN1 for aNDF or ADF degradability (NDFD, ADFD). Silages produced with FAEI had greater DM losses (P=0.017) and pH (P<0.001) and lesser NDFD (P=0.019), ADFD (P=0.010) and proportion of lactic acid in the total fermentation products (P=0.006) after 70 days of ensilage, compared to uninoculated silages. The use of fibrolytic enzymes did not have a major effect on the ensilage fermentation of alfalfa, either ensiled alone or with an inoculant. No advantage in ruminal DM or fibre degradability was observed for silages produced with fibrolytic enzymes. The use of a ferulic acid esterase-producing inoculant alone did not improve the nutritive value of alfalfa silage, and did not promote any incremental effects when applied in combination with fibrolytic enzyme products. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Electrochemical experiments in acetic acid-acetate buffer (pH 4.5) are conducted in order to understand metallic and ionic mercury adsorption processes on the pyrite surface. The nature as well as the extent of the spontaneous interaction between pyrite and mercuric ions was evaluated. The spontaneous reduction of mercury species onto pyrite surface was confirmed. These results represent a first step for the use of mining wastes rich in pyrite for mercury pollution abatement. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
An analytical method based on liquid chromatography with positive ion electrospray ionization (ESI) coupled to tandem mass spectrometry detection was developed for the determination of pantoprazole (CAS 102625-70-7) in human plasma using lansoprazole (CAS 103577-45-3) as the internal standard. The analyte and internal standard were extracted from the plasma samples by liquid/liquid extraction using diethyl-ether/dichloromethane (70:30; v/v) and chromatographed on a C-8 analytical column. The mobile phase consisted of acetonitrile/water/methanol (57:25:18; v/v/v) + 10 mmol/l acetic acid + 20 mmol/l ammonium acetate. The method has a chromatographic total run time of 4.5 min and was linear within the range 5.0-5,000 ng/mL. Detection was performed on a triple quadrupole tandem mass spectrometer by Multiple Reaction Monitoring (MRM). The intra- and inter-run precisions calculated from quality control (QC) samples were 4.2% and 3.2%, respectively. The accuracies as determined from QC samples were -5.0% (intra-run) and 2.0% (inter-run). The method herein described was employed in a bioequivalence study of two tablet formulations of pantoprazole.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A biomimetic sensor is proposed as a promising new analytical method for determination of norfloxacin (NF) in pharmaceuticals. The sensor was prepared by modifying a glassy carbon electrode surface with a Nafion® membrane doped with poly(copper phthalocyanine) complex [poly-CuPc]. Amperometric measurements carried out with the sensor under an applied potential of -0.05 V vs Ag|AgCl in 0.1 mol L-1 acetic acid containing 1.5 × 10-3 mol L-1 hydrogen peroxide showed a linear response range from 2.0 × 10-4 to 1.2 × 10-3 mol L-1. Selectivity and interference studies were also performed. A sensor response mechanism is proposed, based on the experimental evidence. Recovery studies were carried out using environmental samples, in order to evaluate the sensor’s potential for use with these sample classes. Finally, sensor performance was evaluated using analyses of commercial formulations.