Improved growth of GaN layers on ultra thin silicon nitride/Si (111) by RF-MBE

High-quality GaN epilayers were grown on Si (1 1 1) substrates by molecular beam epitaxy using a new growth process sequence which involved a substrate nitridation at low temperatures, annealing at high temperatures, followed by nitridation at high temperatures, deposition of a low-temperature buffer layer, and a high-temperature overgrowth. The material quality of the GaN films was also investigated as a function of nitridation time and temperature. Crystallinity and surface roughness of GaN was found to improve when the Si substrate was treated under the new growth process sequence. Micro-Raman and photoluminescence (PL) measurement results indicate that the GaN film grown by the new process sequence has less tensile stress and optically good. The surface and interface structures of an ultra thin silicon nitride film grown on the Si surface are investigated by core-level photoelectron spectroscopy and it clearly indicates that the quality of silicon nitride notably affects the properties of GaN growth. (C) 2010 Elsevier Ltd. All rights reserved.

Dietary aspects of cow's milk allergy in young children

Cow s milk allergy (CMA) affects about 2-6% of infants and young children. Environmental factors during early life are suggested to play a role in the development of allergic diseases. One of these factors is likely to be maternal diet during pregnancy and lactation. The association between maternal diet and development of CMA in offspring is not well known, but diet could contain factors that facilitate development of tolerance. After an established food allergy, another issue is gaining tolerance towards an antigen that causes symptoms. The strictness of the elimination depends on the individual level of tolerance. This study aimed at validating a questionnaire used to inquire about food allergies in children, at researching associations between maternal diet during pregnancy and lactation and subsequent development of cow s milk allergy in the offspring, and at evaluating the degree of adherence to a therapeutic elimination diet of children with CMA and factors associated with the adherence and age of recovery. These research questions were addressed in a prospective birth cohort born between 1997 and 2004 at the Tampere and Oulu University Hospitals. Altogether 6753 children of the Diabetes Prediction and Prevention (DIPP) Nutrition cohort were investigated. Questionnaires regarding allergic diseases are often used in studies without validation. High-quality valid tools are therefore needed. Two validation studies were conducted here: one by comparing parentally reported food allergies with information gathered from patient records of 1122 children, and the other one by comparing parentally reported CMA with information in the reimbursement records of special infant formulae in the registers of the Social Insurance Institution for 6753 children. Both of these studies showed that the questionnaire works well and is a valid tool for measuring food allergies in children. In the first validation study, Cohen s kappa values were within 0.71-0.88 for CMA, 0.74-0.82 for cereal allergy, and 0.66-0.86 for any reported food allergy. In the second validation study, the kappa value was 0.79, sensitivity 0.958, and specificity 0.965 for reported and diagnosed CMA. To investigate the associations between maternal diet during pregnancy and lactation and CMA in offspring, 6288 children were studied. Maternal diet during pregnancy (8th month) and lactation (3rd month) was assessed by a validated, 181-item semi-quantitative food frequency questionnaire (FFQ), and as an endpoint register-based information on diagnosed CMA was obtained from the Social Insurance Institution and complemented with parental reports of CMA in their children. The associations between maternal food consumption and CMA in offspring were analyzed by logistic regression comparing the highest and lowest quarters with two middle quarters of consumption and adjusted for several potential confounding factors. High maternal intake of milk products (OR 0.56, 95% CI 0.37-0.86 p = 0.002) was associated with a lower risk of CMA in offspring. When stratified according to maternal allergic rhinitis or asthma, a protective association of high use of milk products with CMA was seen in children of allergy-free mothers (OR 0.30, 95% CI 0.13 - 0.69, p < 0.001), but not in children of allergic mothers. Moreover, low maternal consumption of fish during pregnancy was associated with a higher risk of CMA in children of mothers with allergic rhinitis or asthma (OR 1.47, 95% CI 0.96 - 2.27 for the lowest quarter, p = 0.043). In children of nonallergic mothers, this association was not seen. Maternal diet during lactation was not associated with CMA in offspring, apart from an inverse association between citrus and kiwi fruit consumption and CMA. These results imply that maternal diet during pregnancy may contain factors protective against CMA in offspring, more so than maternal diet during lactation. These results need to be confirmed in other studies before giving recommendations to the public. To evaluate the degree of adherence to a therapeutic elimination diet in children with diagnosed CMA, food records of 267 children were studied. Subsequent food records were examined to assess the age at reintroduction of milk products to the child s diet. Nine of ten families adhered to the elimination diet of the child with extreme accuracy. Older and monosensitized children had more often small amounts of cow s milk protein in their diet (p < 0.001 for both). Adherence to the diet was not related to any other sociodemographic factor studied or to the age at reintroduction of milk products to the diet. Low intakes of vitamin D, calcium, and riboflavin are of concern in children following a cow s milk-free diet. In summary, we found that the questionnaires used in the DIPP study are valid in investigating CMA in young children; that there are associations between maternal diet during pregnancy and lactation and the development of CMA in offspring; and that the therapeutic elimination diet in children with diagnosed CMA is rigorously adhered to.

Consumers' attitudes towards food prices

High food prices can be a barrier to healthy eating because some of the food products may be perceived as expensive. Understanding the role of price in food purchase situations is important, but only a few studies document attitudes towards expensiveness or cheapness in foods. In this thesis, the role of food price in food choice and consumers attitudes towards food prices were investigated and the aim was to measure the food price attitudes. Food price attitudes were hypothesized to have an impact on consumers willingness to pay judgements and their willingness to buy premium-priced food products. First, using qualitative data consisting of 40 thematic interviews the experiences of the expensiveness and cheapness in foods were explored by using functional food products as a target product category. Second, a Food Price Attitude Scale was developed using four quantitative surveys representing Finnish consumers (2001 N=1158; 2002 N=1156; 2004a N=1113; 2004b N=1027). Food price attitudes were confirmed to compose a multidimensional construct and consumers may perceive positive and negative attitudes towards both high and low food prices. Finnish consumers were clustered into four groups based on their food price attitudes. In the first group, 29% of respondents were negative towards high food prices and they were willing to seek low food prices, whereas respondents in another group (22%) were positive towards high food prices. Additionally, in the third group consumers (17%) were willing to pay for high quality but still looked for low food prices. In the fourth group, consumers (32%) were willing to look for low food prices, unwilling to pay for high quality, but high-priced food was appreciated if offered to others. It was found in qualitative data that consumers willingness to accept high prices in foods was connected to price fairness and to justifications. Feelings of fairness or unfairness might be a core element of food price attitudes. Using quantitative methods, it was confirmed that positive attitudes towards high food prices in terms of high quality enhanced consumers willingness to buy food products with certain benefits (e.g., a health claim). Additionally, the favourable attitude towards low food prices lowered the willingness to pay estimates. This type of tendency, however, can create a possible bias in small convenient samples. In the food price-related research, it is advisable to take into account food price attitudes as possible background variables. The Food Price Attitude Scale needs further development to increase construct validity even though, in the present study, it was shown to be a reliable measure with good predictive and discriminant validity. The theoretical and managerial implications of the results for a better understanding of the role of price in consumers food purchases are discussed.

Carotid Surgery : A posse ad esse non valet consequentia

According to a large body of evidence, carotid endarterectomy (CEA) can prevent strokes, provided that appropriate inclusion criteria and high-quality perioperative treatment methods are utilised with low complication rates. From the patient s perspective, it is of paramount importance that the operation is as safe and effective as possible. From the community s point of view, it is important that CEA provision prevents as many strokes as possible. In order to define the stroke preventing potential of CEA in different communities, a comparison between eight European countries and Australia was performed including 53 077 carotid interventions. A more detailed evaluation was performed in Finland, the United Kingdom and Egypt. It could be estimated that many potentially preventable strokes occur due to insufficient diagnostics and CEA provision. The number of CEAs should be at least doubled in the Helsinki region. The theoretical power of CEA provision in stroke prevention varied significantly between the countries. Delay from symptom to surgery has been identified as one of the most important factors influencing the effectiveness of CEA. In 2008 only 11% of CEAs in Helsinki university central hospital (HUCH) were performed within the recommended14 days. Registered data of 673 CEAs in HUCH during 2000-2005 was analyzed. There was no systematic error that would have changed the outcome analysis. However it is important that registers are audited regularly and cross matching of different registries is possible. A previously unpublished method of combining medial mandibulotomy, neck incision and carotid artery interposition was carried out as a collaboration of maxillofacial, ear, nose and throat and vascular surgeons. Five patients were operated on with a technique that was feasible and possible to perform with little morbidity, but due to the significant risks involved, this technique should be reserved for carefully selected cases. In stroke prevention, organisational decisions seem far more important than details in interventional procedures when CEA is performed with low complication rates, as was the case in the present study. A TIA clinic approach with close co-operation between the on-call vascular surgeons, neurologists and radiologists should be available at all centres treating these patients. Patients should have a direct and fast admission to the hospital performing CEA.

Näkemyksiä käsityöopetuksen kehitystarpeista yhtenäisessä perusopetuksessa

The objective of this study was to find out what development targets craft teachers could identify in the comprehensive school classes 1 through 9 after the curriculum of the year 2004 had declared craft education uniform in textile and technical craft. Earlier research had shown that after this curricular reform craft education had been carried out in dissimilar ways in different municipalities and schools. This causes differences in the contents of teaching and thus in learning outcomes on national level. The most problematic situations occur on the 7th grade when the classes contain pupils with very heterogeneous skill levels. My intention is to find general themes in craft education that are significant when considering developmental objectives. The problem was explored by four research questions as follows: What kind of problems have craft teachers confronted during the application of the curriculum 2004, what are the most important objectives and contents in craft for the comprehensive school, how craft education should be arranged in the future and what prerequisites should be considered to generate high quality craft education? The study was carried out by a qualitative research approach. The informants consisted of 21 persons, out of which 15 were textile or technical teachers and six were textile or technical teacher students. The research data was collected in the form of short open narratives, based on a partially structured inquiry. Respectively content analysis was applied for analysis of the narratives. Research results revealed that craft teachers were mainly satisfied in uniform craft and hoped that both textile and technical craft could be compulsory school subjects for both genders. Textile and technical craft should be defined as separate independent school subjects, both of which should be developed with broader and high quality contents. Craft subjects should be allocated more teaching time. Teachers asked for a more logically proceeding curriculum, initiating from the beginning to the end of the compulsory school. It was suggested that this could be done by a qualified subject teacher. A uniform curriculum solution must be found for the whole country.

Interest in university studies : Its role and relation to other motivational variables

This dissertation empirically explored interest as a motivational force in university studies, including the role it currently plays and possible ways of enhancing this role as a student motivator. The general research questions were as follows: 1) What role does interest play in university studies? 2) What explains academic success if studying is not based on interest? 3) How do different learning environments support or impede interest-based studying? Four empirical studies addressed these questions. Study 1 (n=536) compared first-year students explanations of their disciplinary choices in three fields: veterinary medicine, humanities and law. Study 2 (n=28) focused on the role of individual interest in the humanities and veterinary medicine, fields which are very different from each other as regards their nature of studying. Study 3 (n=52) explored veterinary students motivation and study practices in relation to their study success. Study 4 (n=16) explored veterinary students interest experience in individual lectures on a daily basis. By comparing different fields and focusing on one study field in more detail, it was possible to obtain a many-sided picture of the role of interest in different learning environments. Questionnaires and quantitative methods have often been used to measure interest in academic learning. The present work is based mostly on qualitative data, and qualitative methods were applied to add to the previous research. Study 1 explored students open-ended answers, and these provided a basis for the interviews in Study 2. Study 3 explored veterinary students portfolios in a longitudinal setting. For Study 4, a diary including both qualitative and quantitative measures was designed to capture veterinary students interest experience. Qualitative content analysis was applied in all four studies, but quantitative analyses were also added. The thesis showed that university students often explain their disciplinary choices in terms of interest. Because interest is related to high-quality learning, the students seemed to have a good foundation for successful studies. However, the learning environments did not always support interest-based studying; Time-management and coping skills were found to be more important than interest in terms of study success. The results also indicated that interest is not the only motivational variable behind university studies. For example, future goals are needed in order to complete a degree. Even so, the results clearly indicated that it would be worth supporting interest-based studying both in professionally and generally oriented study fields. This support is important not only to promote high-quality learning but also meaningful studying, student well-being, and life-long learning.

Synthesis and characterization of single-crystalline alpha-MoO3 nanofibers for enhanced Li-ion intercalation applications

High quality, single-crystalline alpha-MoO3 nanofibers are synthesized by rapid hydrothermal method using a polymeric nitrosyl-complex of molybdenum(II) as molybdenum source without employing catalysts, surfactants, or templates. The possible reaction pathway is decomposition and oxidation of the complex to the polymolybdate and then surface condensation on the energetically favorable 001] direction in the initially formed nuclei of solid alpha-MoO3 under hydrothermal conditions. Highly crystalline alpha-MoO3 nanofibers have grown along 001] with lengths up to several micrometres and widths ranging between 280 and 320 nm. The alpha-MoO3 nanofibers exhibit desirable electrochemical properties such as high capacity reversibility as a cathode material of a Li-ion battery.

Critical exponent of the electrical conductivity in the paracoherence region of a thin film of YBa2Cu3O7?x

Critical exponent of the electrical conductivity in the paracoherence region (gamma) of the high temperature superconductor YBa2Cu3O7-x (YBCO) has been estimated for high quality thin film on ZrO2 substrate prepared by high pressure oxygen sputtering. High energy ion irradiation was carried out using 100 MeV O-16(7+) ions at liquid nitrogen to see the effects of disorder on the value of the exponent. The critical exponent from a value of about 2 to 1.62 upon irradiation. Studies were also carried film to see the effect of ageing and annealing.

Temperature-dependent photoluminescence of GaN grown on beta-Si3N4/Si (111) by plasma-assisted MBE

Photoluminescence (PL) of high quality GaN epitaxial layer grown on beta-Si3N4/Si (1 1 1) substrate using nitridation-annealing-nitridation method by plasma-assisted molecular beam epitaxy (PA-MBE) was investigated in the range of 5-300 K. Crystallinity of GaN epilayers was evaluated by high resolution X-ray diffraction (HRXRD) and surface morphology by Atomic Force Microscopy (AFM) and high resolution scanning electron microscopy (HRSEM). The temperature-dependent photoluminescence spectra showed an anomalous behaviour with an `S-like' shape of free exciton (FX) emission peaks. Distant shallow donor-acceptor pair (DAP) line peak at approximately 3.285 eV was also observed at 5 K, followed by LO replica sidebands separated by 91 meV. The activation energy of the free exciton for GaN epilayers was also evaluated to be similar to 27.8 +/- 0.7 meV from the temperature-dependent PL studies. Low carrier concentrations were observed similar to 4.5 +/- 2 x 10(17) Cm-3 by measurements and it indicates the silicon nitride layer, which not only acts as a growth buffer layer, but also effectively prevents Si diffusion from the substrate to GaN epilayers. The absence of yellow band emission at around 2.2 eV signifies the high quality of film. The tensile stress in GaN film calculated by the thermal stress model agrees very well with that derived from Raman spectroscopy. (C) 2010 Elsevier B.V. All rights reserved.

Surface resistance and residual losses of Ag?doped YBa2Cu3O7?? thin films on sapphire

High?quality Ag?doped YBa2Cu3O7?? thin films have been grown by laser ablation on R?plane ?1102? sapphire without any buffer layer. Thin films have been found to be highly c?axis oriented with Tc=90 K, transition width ?T?1 K, and transport Jc=1.2×106 A?cm?2 at 77 K in self?field conditions. The microwave surface resistance of these films measured on patterned microstrip resonators has been found to be 530 ?? at 10 GHz at 77 K which is the lowest reported on unbuffered sapphire. Improved in?plane epitaxy and reduced reaction rate between the substrate and the film caused due to Ag in the film are believed to be responsible for this greatly improved microwave surface resistance. © 1995 American Institute of Physics.

Dodecagonal space vector diagram using cascaded H-Bridge inverters

This paper proposes the development of dodecagonal (12-sided) space vector diagrams from cascaded H-Bridge inverters. As already reported in literatures, dodecagonal space vector diagrams have many advantages over conventional hexagonal ones. Some of them include the absence of 6n±1, (n=odd) harmonics from the phase voltage, and the extension of the linear modulation range. In this paper, a new power circuit is proposed for generating multiple dodecagons in the space vector plane. It consists of two cascaded H-Bridge cells fed from asymmetric dc voltage sources. It is shown that, with proper PWM timing calculation and placement of active and zero vectors, a very high quality of sine-wave can be produced. At the same time, the switching frequency of individual cells can be reduced substantially. Detailed PWM analysis, one design example and an elaborate simulation study is presented to support the proposed idea.

Automatic decomposition of unstructured meshes employing genetic algorithms for parallel FEM computations

Parallel execution of computational mechanics codes requires efficient mesh-partitioning techniques. These mesh-partitioning techniques divide the mesh into specified number of submeshes of approximately the same size and at the same time, minimise the interface nodes of the submeshes. This paper describes a new mesh partitioning technique, employing Genetic Algorithms. The proposed algorithm operates on the deduced graph (dual or nodal graph) of the given finite element mesh rather than directly on the mesh itself. The algorithm works by first constructing a coarse graph approximation using an automatic graph coarsening method. The coarse graph is partitioned and the results are interpolated onto the original graph to initialise an optimisation of the graph partition problem. In practice, hierarchy of (usually more than two) graphs are used to obtain the final graph partition. The proposed partitioning algorithm is applied to graphs derived from unstructured finite element meshes describing practical engineering problems and also several example graphs related to finite element meshes given in the literature. The test results indicate that the proposed GA based graph partitioning algorithm generates high quality partitions and are superior to spectral and multilevel graph partitioning algorithms.

Polymerization of pyrrole and processing of the resulting polypyrrole as blends with plasticised PVC

Polypyrrole was synthesized by chemical oxidation of pyrrole in water containing various sulphonic acids like toluene sulphonic acid (TSA), sulphosalicylic acid (SSA), and camphor sulphonic acid (CSA), as well as a combination of each sulphonic acid with sodium dodecyl benzene sulphonate (NaDBS) to investigate the effect of doping on conductivity, yield, and processability of the conducting polymer. Free-standing blend films of polypyrrole and plasticized polyvinyl chloride (PVC) were obtained by casting an homogeneous suspension of the two polymers in tetrahydrofuran. The maximum conductivity of the blend film is similar to 0.3 S/cm, corresponding to a weight fraction of 0.16 w/w polypyrrole. The blend film is semiconducting in the range 300-10 K. A TG-DTA scan indicates the blend film to be amorphous with a stepwise decomposition process similar to pristine PVC. The choice of a dual dopant system during synthesis and the plasticised polymer during subsequent processing were keys to obtaining homogeneous high-quality films. (C) 2001 John Wiley & Sons, Inc.

Development of recombinant coat protein antibody based IC-RT-PCR for detection and discrimination of sugarcane streak mosaic virus isolates from Southern India

Sugarcane streak mosaic virus (SCSMV), causes mosaic disease of sugarcane and is thought to belong to a new undescribed genus in the family Potyviridae. The coat protein (CP) gene from the Andhra Pradesh (AP) isolate of SCSMV (SCSMV AP) was cloned and expressed in Escherichia coli. The recombinant coat protein was used to raise high quality antiserum. The CP antiserum was used to develop an immunocapture reverse transcription-polymerase chain reaction (IC-RT-PCR) based assay for the detection and discrimination of SCSMV isolates in South India. The sequence of the cloned PCR products encoding 3'untranslated region (UTR) and CP regions of the virus isolates from three different locations in South India viz. Tanuku (Coastal Andhra Pradesh), Coimbatore (Tamil Nadu) and Hospet (Karnataka) was compared with that of SCSMV AP The analysis showed that they share 89.4, 89.5 and 90% identity respectively at the nucleotide level. This suggests that the isolates causing mosaic disease of sugarcane in South India are indeed strains of SCSMV In addition, the sensitivity of the IC-RT-PCR was compared with direct antigen coating-enzyme linked immunosorbent assay (DAC-ELISA) and dot-blot immunobinding assays and was found to be more sensitive and hence could be used to detect the presence of virus in sugarcane breeding, germplasm centres and in quarantine programs.

Epitaxial Growth of Co3O4 Films by Low Temperature, Low Pressure Chemical Vapor Deposition

The growth of strongly oriented or epitaxial thin films of metal oxides generally requires relatively high growth temperatures or infusion of energy to the growth surface through means such as ion bombardment. We have grown high quality epitaxial thin films of Co3O4 on different substrates at a temperature as low as 450°C by low-pressure metal-organic chemical vapor deposition (MOCVD) using cobalt(II) acetylacetonate as the precursor. With oxygen as the reactant gas, polycrystalline Co3O4 films are formed on glass and Si(100) in the temperature range 350-550°C. Under similar conditions of growth, highly oriented films of Co3O4 are formed on SrTiO3(100) and LaAlO3(100). The film on LaAlO3(100) grown at 450°C show a rocking curve FWHM of 1.61°, which reduces to 1.32° when it is annealed in oxygen at 725°C. The film on SrTiO3(100) has a FWHM of 0.330 (as deposited) and 0.29° (after annealing at 725°C). The ø-scan analysis shows cube-on-cube epitaxy on both these substrates. The quality of epitaxy on SrTiO3(100) is comparable to the best of the pervoskite-based oxide thin films grown at significantly higher temperatures.