Supply Chain Management in Confined Site Construction: Strategies to Reduce Delay in the Delivery of Materials to Site

With the increase in construction in dense urban environments, the delays associated with managing the material supply chain to site is called into question. Purpose: The aim of this investigation is to gain the perspective of construction contractors operating in a dense urban environment and the resulting strategies adopted to reduce delays in the delivery of materials to site. Methodology: This is achieved through incorporating a comprehensive literature review on the subject in conjunction with industry interviews with construction professionals in the identification of various management issues and corresponding strategies in the reduction of delays in the delivery of materials to site. Findings: The key issue which emerges is the lack of space for unloading bays while the corresponding key strategy is to schedule deliveries outside peak congestion times. Practical Implication: With confined site construction evident throughout the industry and the noted importance of an effective supply chain, the findings here in further assist on-site management in the daily task of ensuring the effective delivery and off-loading of materials in a complex and hazardous environment. Originality/Value: This research aids on-site management of confined site environments in the coordination of the material supply chain to site.

Combining global climate and regional landscape models to improve prediction of invasion risk

Aim
It is widely acknowledged that species distributions result from a variety of biotic and abiotic factors operating at different spatial scales. Here, we aimed to (1) determine the extent to which global climate niche models (CNMs) can be improved by the addition of fine-scale regional data; (2) examine climatic and environmental factors influencing the range of 15 invasive aquatic plant species; and (3) provide a case study for the use of such models in invasion management on an island.

Location
Global, with a case study of species invasions in Ireland.

Methods
Climate niche models of global extent (including climate only) and regional environmental niche models (with additional factors such as human influence, land use and soil characteristics) were generated using maxent for 15 invasive aquatic plants. The performance of these models within the invaded range of the study species in Ireland was assessed, and potential hotspots of invasion suitability were determined. Models were projected forward up to 2080 based on two climate scenarios.

Results
While climate variables are important in defining the global range of species, factors related to land use and nutrient level were of greater importance in regional projections. Global climatic models were significantly improved at the island scale by the addition of fine-scale environmental variables (area under the curve values increased by 0.18 and true skill statistic values by 0.36), and projected ranges decreased from an average of 86% to 36% of the island.

Main conclusions
Refining CNMs with regional data on land use, human influence and landscape may have a substantial impact on predictive capacity, providing greater value for prioritization of conservation management at subregional or local scales.

Endocrine disruptor activity of multiple environmental food chain contaminants

Industrial chemicals, antimicrobials, drugs and personal care products have been reported as global pollutants which enter the food chain. Some of them have also been classified as endocrine disruptors based on results of various studies employing a number of in vitro/. vivo tests. The present study employed a mammalian reporter gene assay to assess the effects of known and emerging contaminants on estrogen nuclear receptor transactivation.Out of fifty-nine compounds assessed, estrogen receptor agonistic activity was observed for parabens (. n= 3), UV filters (. n= 6), phthalates (. n= 4) and a metabolite, pyrethroids (. n= 9) and their metabolites (. n= 3). Two compounds were estrogen receptor antagonists while some of the agonists enhanced 17β-estradiol mediated response.This study reports five new compounds (pyrethroids and their metabolites) possessing estrogen agonist activity and highlights for the first time that pyrethroid metabolites are of particular concern showing much greater estrogenic activity than their parent compounds.

Synthesis, thermal characterization and rheological properties of a homologous series of polymethacrylate-based side-chain liquid crystal polymers

A new homologous series of side-chain liquid crystal polymers, the poly[omega-(4-cyanoazobenzene-4'-oxy)alkyl methacrylate]s, have been prepared in which the length of the flexible alkyl spacer is varied from 3 to 12 methylene units. All the polymers exhibit liquid crystalline behaviour; specifically, crystal E, smectic A and nematic phases are observed. The glass transition temperatures decrease on increasing spacer length before reaching a limiting value at ca. 30 degrees C. The clearing temperatures exhibit an odd-even effect on varying the length and parity of the spacer. This is attributed to the change in the average shape of the side chain as the parity of the spacer is varied. This rationalization also accounts for the observed alternation in the entropy change associated with the clearing transition. A weak relaxation is observed theologically for several members of this polymer series at temperatures above their respective glass transition temperatures. This is attributed either to specific motions of the smectic layers or to 180 degrees reorientational jumps of the long axis of the mesogenic unit about the polymer backbone. (C) 1997 Elsevier Science Ltd. All rights reserved.

Going above and beyond: how sustainability culture and entrepreneurial orientation drive social sustainability supply chain practice adoption

Purpose
– This paper aims to examine what drives the adoption of different social sustainability supply chain practices. Research has shown that certain factors drive the adoption of environmental sustainability practices but few focus on social supply chain practices, delineate which practices are adopted or what drives their adoption.

Design/methodology/approach
– The authors examine the facilitative role of sustainability culture to explain the adoption of social sustainability supply chain practices: basic practices, consisting of monitoring and management systems and advanced practices, which are new product and process development and strategic redefinition. The authors then explore the role played by a firm’s entrepreneurial orientation in shaping and reinforcing the adoption of social sustainability supply chain practices. A survey of 156 supply chain managers in multiple industries in Ireland was conducted to test the relationship between the variables.

Findings
– The findings show that sustainability culture is positively related to all the practices, and entrepreneurial orientation impacts and moderates social sustainability culture in advanced social sustainability supply chain adoption.

Research limitations/implications
– As with any survey, this is a single point in time with a single respondent. Implications for managers include finding the right culture in the organisation to implement social sustainability supply chain management practices that go beyond monitoring to behavioural changes in the supply chain with implications beyond the dyad of buyer and supplier to lower tier suppliers and the community surrounding the supply chain.

Practical implications
– The implications for managers include developing and fostering cultural attributes in the organisation to implement social sustainability supply chain management practices that go beyond monitoring suppliers to behavioural changes in the supply chain with implications beyond the dyad of buyer and supplier to lower tier suppliers and the community surrounding the supply chain.

Originality/value
– This is the first time, to the authors’ knowledge, that cultural and entrepreneurial variables have been tested for social sustainability supply chain practices, giving them new insights into how and why social sustainability supply chain practices are adopted.

Justifying accounting change through global discourses and legitimation strategies. The case of the UK central government.

Accounting has been viewed, especially through the lens of the recent managerial reforms, as a neutral technology that, in the hands of rational managers, can support effective and efficient decision making. However, the introduction of new accounting practices can be framed in a variety of ways, from value-neutral procedures to ideologically-charged instruments. Focusing on financial accounting, budgeting and performance management changes in the UK central government, and through extensive textual analysis and interviews in three government departments, this paper investigates: how accounting changes are discussed and introduced at the political level through the use of global discourses; and what strategies organisational actors subsequently use to talk about and legitimate such discourses at different organisational levels. The results shows that in political discussions there is a consistency between the discourses (largely NPM) and the accounting-related changes that took place. The research suggests that a cocktail of legitimation strategies was used by organisational actors to construct a sense of the changes, with authorisation, often in combination with, at the very least, rationalisation strategies most widely utilised. While previous literature posits that different actors tend to use the same rhetorical sequences during periods of change, this study highlights differences at different organisational levels.

Impacts of Milk Fraud on Food Safety and Nutrition with Special Emphasis on Developing Countries

Milk in its natural form has a high food value, since it is comprised of a wide variety of nutrients which are essential for proper growth and maintenance of the human body. In recent decades, there has been an upsurge in milk consumption worldwide, especially in developing countries, and it is now forming a significant part of the diet for a high proportion of the global population. As a result of the increased demand, in addition to the growth in competition in the dairy market and the increasing complexity of the supply chain, some unscrupulous producers are indulging in milk fraud. This malpractice has become a common problem in the developing countries, which lack strict vigilance by food safety authorities. Milk is often subjected to fraud (by means of adulteration) for financial gain, but it can also be adulterated due to ill-informed attempts to improve hygiene conditions. Water is the most common adulterant used, which decreases the nutritional value of milk. If the water is contaminated, for example, with chemicals or pathogens, this poses a serious health risk for consumers. To the diluted milk, inferior cheaper materials may be added such as reconstituted milk powder, urea, and cane sugar, even more hazardous chemicals including melamine, formalin, caustic soda, and detergents. These additions have the potential to cause serious health-related problems. This review aims to investigate the impacts of milk fraud on nutrition and food safety, and it points out the potential adverse human health effects associated with the consumption of adulterated milk.

Fish product mislabelling: failings of traceability in the production chain and implications for illegal, unreported and unregulated (IUU) fishing

Increasing consumer demand for seafood, combined with concern over the health of our oceans, has led to many initiatives aimed at tackling destructive fishing practices and promoting the sustainability of fisheries. An important global threat to sustainable fisheries is Illegal, Unreported and Unregulated (IUU) fishing, and there is now an increased emphasis on the use of trade measures to prevent IUU-sourced fish and fish products from entering the international market. Initiatives encompass new legislation in the European Union requiring the inclusion of species names on catch labels throughout the distribution chain. Such certification measures do not, however, guarantee accuracy of species designation. Using two DNA-based methods to compare species descriptions with molecular ID, we examined 386 samples of white fish, or products labelled as primarily containing white fish, from major UK supermarket chains. Species specific real-time PCR probes were used for cod (Gadus morhua) and haddock (Melanogrammus aeglefinus) to provide a highly sensitive and species-specific test for the major species of white fish sold in the UK. Additionally, fish-specific primers were used to sequence the forensically validated barcoding gene, mitochondrial cytochrome oxidase I (COI). Overall levels of congruence between product label and genetic species identification were high, with 94.34% of samples correctly labelled, though a significant proportion in terms of potential volume, were mislabelled. Substitution was usually for a cheaper alternative and, in one case, extended to a tropical species. To our knowledge, this is the first published study encompassing a large-scale assessment of UK retailers, and if representative, indicates a potentially significant incidence of incorrect product designation.

The value of tests in the diagnosis and management of glaucoma.

PURPOSE:

To assess the noneconomic value of tests used in the diagnosis and management of glaucoma, and explore the contexts and factors that determine such value.

DESIGN:

Perspective.

METHODS:

Selected articles from primary and secondary sources were reviewed and interpreted in the context of the authors' clinical and research experience, influenced by our perspectives on the tasks of reducing the global problem of irreversible blindness caused by glaucoma. The value of any test used in glaucoma is addressed by 3 questions regarding: its contexts, its kind of value, and its implicit or explicit benefits.

RESULTS:

Tonometry, slit-lamp gonioscopy, and optic disc evaluation remain the foundation of clinic-based case finding, whether in areas of more or less abundant resources. In resource-poor areas, there is urgency in identifying patients at risk for severe functional loss of vision; screening strategies have proven ineffective, and efforts are hindered by the inadequate allocation of support. In resource-abundant areas, the wider spectrum of glaucoma is addressed, with emphasis on early detection of structural changes of little functional consequence; these are increasingly the focus of new and expensive technologies whose clinical value has not been established in longitudinal and population-based studies. These contrasting realities in part reflect differences among the value ascribed, often implicitly, to the tests used in glaucoma.

CONCLUSIONS:

The value of any test is determined by 3 aspects: its context of usage; its comparative worth and to whom its benefit accrues; and how we define historically what we are testing. These multiple factors

A high-value, low-cost bubble continuous positive airway pressure system for low-resource settings:technical assessment and initial case reports

Acute respiratory infections are the leading cause of global child mortality. In the developing world, nasal oxygen therapy is often the only treatment option for babies who are suffering from respiratory distress. Without the added pressure of bubble Continuous Positive Airway Pressure (bCPAP) which helps maintain alveoli open, babies struggle to breathe and can suffer serious complications, and frequently death. A stand-alone bCPAP device can cost $6,000, too expensive for most developing world hospitals. Here, we describe the design and technical evaluation of a new, rugged bCPAP system that can be made in small volume for a cost-of-goods of approximately $350. Moreover, because of its simple design--consumer-grade pumps, medical tubing, and regulators--it requires only the simple replacement of a <$1 diaphragm approximately every 2 years for maintenance. The low-cost bCPAP device delivers pressure and flow equivalent to those of a reference bCPAP system used in the developed world. We describe the initial clinical cases of a child with bronchiolitis and a neonate with respiratory distress who were treated successfully with the new bCPAP device.

Mercury (II) removal from aqueous solutions by microporous materials

O Mercúrio é um dos metais pesados mais tóxicos existentes no meio ambiente, é persistente e caracteriza-se por bioamplificar e bioacumular ao longo da cadeia trófica. A poluição com mercúrio é um problema à escala global devido à combinação de emissões naturais e emissões antropogénicas, o que obriga a políticas ambientais mais restritivas sobre a descarga de metais pesados. Consequentemente o desenvolvimento de novos e eficientes materiais e de novas tecnologias para remover mercúrio de efluentes é necessário e urgente. Neste contexto, alguns materiais microporosos provenientes de duas famílias, titanossilicatos e zirconossilicatos, foram investigados com o objectivo de avaliar a sua capacidade para remover iões Hg2+ de soluções aquosas. De um modo geral, quase todos os materiais estudados apresentaram elevadas percentagens de remoção, confirmando que são bons permutadores iónicos e que têm capacidade para serem utilizados como agentes descontaminantes. O titanossilicato ETS-4 foi o material mais estudado devido à sua elevada eficiência de remoção (>98%), aliada à pequena quantidade de massa necessária para atingir essa elevada percentagem de remoção. Com apenas 4 mg⋅dm-3 de ETS-4 foi possível tratar uma solução com uma concentração igual ao valor máximo admissível para descargas de efluentes em cursos de água (50 μg⋅dm-3) e obter água com qualidade para consumo humano (<1.0 μg⋅dm-3), de acordo com a legislação Portuguesa (DL 236/98). Tal como para outros adsorbentes, a capacidade de remoção de Hg2+ do ETS- 4 depende de várias condições experimentais, tais como o tempo de contacto, a massa, a concentração inicial de mercúrio, o pH e a temperatura. Do ponto de vista industrial as condições óptimas para a aplicação do ETS-4 são bastante atractivas, uma vez que não requerem grandes quantidades de material e o tratamento da solução pode ser feito à temperatura ambiente. A aplicação do ETS-4 torna-se ainda mais interessante no caso de efluentes hospitalares, de processos de electro-deposição com níquel, metalúrgica, extracção de minérios, especialmente ouro, e indústrias de fabrico de cloro e soda cáustica, uma vez que estes efluentes apresentam valores de pH semelhantes ao valor de pH óptimo para a aplicação do ETS-4. A cinética do processo de troca iónica é bem descrita pelo modelo Nernst-Planck, enquanto que os dados de equilíbrio são bem ajustados pelas isotérmicas de Langmuir e de Freundlich. Os parâmetros termodinâmicos, ΔG° and ΔH° indicam que a remoção de Hg2+ pelo ETS-4 é um processo espontâneo e exotérmico. A elevada eficiência do ETS-4 é confirmada pelos valores da capacidade de remoção de outros materiais para os iões Hg2+, descritos na literatura. A utilização de coluna de ETS-4 preparada no nosso laboratório, para a remoção em contínuo de Hg2+ confirma que este material apresenta um grande potencial para ser utilizado no tratamento de águas. ABSTRACT: Mercury is one of the most toxic heavy metals, exhibiting a persistent character in the environment and biota as well as bioamplification and bioaccumulation along the food chain. Natural inputs combined with the global anthropogenic sources make mercury pollution a planetary-scale problem, and strict environmental policies on metal discharges have been enforced. The development of efficient new materials and clean-up technologies for removing mercury from effluents is, thus, timely. In this context, in my study, several microporous materials from two families, titanosilicates and zirconosilicates were investigated in order to assess their Hg2+ sorption capacity and removal efficiency, under different operating conditions. In general, almost all microporous materials studied exhibited high removal efficiencies, confirming that they are good ion exchangers and have potential to be used as Hg2+ decontaminant agents. Titanosilicate ETS-4 was the material most studied here, by its highest removal efficiency (>98%) and lowest mass necessary to attain it. Moreover, according with the Portuguese legislation (DL 236/98) it is possible to attain drinking water quality (i.e. [Hg2+]< 1.0 μg⋅dm-3) by treating a solution with a Hg2+ concentration equal to the maximum value admissible for effluents discharges into water bodies (50 μg⋅dm-3), using only 4 mg⋅dm-3 of ETS-4. Even in the presence of major freshwater cations, ETS-4 removal efficiency remains high. Like for other adsorbents, the sorption capacity of ETS-4 for Hg2+ ions is strongly dependent on the operating conditions, such as contact time, mass, initial Hg2+ concentration and solution pH and, to a lesser extent, temperature. The optimum operating conditions found for ETS-4 are very attractive from the industrial point of view because the application of ETS-4 for the treatment of wastewater and/or industrial effluents will not require larges amounts of adsorbent, neither energy supply for temperature adjustments becoming the removal process economically competitive. These conditions become even more interesting in the case of medical institutions liquid, nickel electroplating process, copper smelter, gold ore tailings and chlor-alkali effluents, since no significant pH adjustments to the effluent are necessary. The ion exchange kinetics of Hg2+ uptake is successfully described by the Nernst-Planck based model, while the ion exchange equilibrium is well fitted by both Langmuir and Freundlich isotherms. Moreover, the feasibility of the removal process was confirmed by the thermodynamic parameters (ΔG° and ΔH°) which indicate that the Hg2+ sorption by ETS-4 is spontaneous and exothermic. The higher efficiency of ETS-4 for Hg2+ ions is corroborate by the values reported in literature for the sorption capacity of other adsorbents for Hg2+ ions. The use of an ETS-4 fixed-bed ion exchange column, manufactured in our laboratory, in the continuous removal of Hg2+ ions from solutions confirms that this titanosilicate has potential to be used in industrial water treatment.

Synthesis and computer-assisted design of mitochondrial electron transport-chain inhibitors as antimalarial agents

Tese de doutoramento, Farmácia (Química Farmacêutica e Terapêutica), Universidade de Lisboa, Faculdade de Farmácia, 2014

Global nation product equity depending on a level of cultural diffusion

Purpose This paper aims to propose the global nation product equity model (GNPE) to measure global consumers’ equity of a product that a country produces, especially a nation’s cultural products (i.e. culducts). The model also examines the significant difference of GNPE depending on a cultural diffusion level. GNPE model proposes that depending on the level of people’s recognition/acceptance/preference of a culture from another country (i.e. cultural diffusion level), the equity of a product from that country could be different in different countries. As variables that affect GNPE, global nation product equity in general, global nation product equity of a product category and nation cultural equity are included in the model. Design/methodology/approach To test the model, this study developed Hallyu (Korean cultural diffusion)-related Korean culducts and measured global consumers’ equity for the Korean culducts. In all, 351 surveys were collected from China, France, England and the USA. Findings The results show the significantly different equities and relationships among equities depending on the level of Hallyu diffusion in each country. Therefore, Korea is suggested to focus on different equities in different countries. Originality/value This research proposed a new model that extends the previous brand equity models to non-branded products (i.e. cultural products). This model proposed new variables that affect equity of a product mentioned above and suggests different equities to improve in different countries depending on their level of cultural diffusion. Also, this cross-cultural study suggests a direction of culduct design, distribution and promotion strategies in the global market.

Constructing Cultural Policies in Romania. A possible model for communicating the national value system

The premise of this paper is that a model for communicating the national value system must start from a strategy aimed at the identification, the cultivation and communication of values that give consistency to the value system. The analysis concentrates on the elements of such strategies and on the implications of applying a value communication program on the identity architecture of the community. The paper will also discuss the role of the national value system in the context of the emerging global culture, where the individual has the power to create his/her own hybrid cultural model.

Proposta de implementação da responsabilidade social numa empresa de engenharia e construção

Este estudo tem como finalidade analisar a possibilidade de implementação e integração do sistema de gestão da responsabilidade social numa empresa de engenharia e construção, de acordo com a norma NP 4469-1 (2008). Um dos objetivos deste trabalho é explorar uma das atividades fundamentais para o crescimento da economia: a construção. Esta funciona como barómetro da economia nacional, ou seja, movimenta vários setores importantes na sua cadeia de produção, contribuindo na criação de riqueza como também de emprego. Como consequência das mudanças na economia nos últimos anos, o comércio nacional transformou-se em comércio globalizado, tendo como mercado não só um país mas o mundo inteiro. As empresas veem isso como um desafio, independentemente da sua dimensão. A redução de custos e a diferenciação não podem ser a única fonte de competitividade. A recente situação de instabilidade económica mundial impulsiona as empresas a inovarem na sua imagem para com os stakeholders e, assim, garantir o seu desenvolvimento e sustentabilidade financeira. A temática da Responsabilidade Social Empresarial (RSE) surgiu da necessidade de existir um espírito empresarial responsável, ao encontro do conceito de desenvolvimento sustentável (Baylis e Smith, 2005). Apesar da ampla divulgação da noção de responsabilidade social das empresas, não se verifica, no entanto, uma definição exata da mesma, pois o tema tem sido abordado de diversas formas e tem dividido opiniões ao longo dos anos. A responsabilidade social é, assim, um fruto da gestão das organizações e das profundas críticas sociais, legais, éticas e económicas, inspiradas nos parâmetros da obtenção de valor social (Parra, 2003). A sustentabilidade revela uma mudança de paradigma do mundo empresarial, na medida em que as empresas devem adotar práticas socialmente responsáveis, que integrem de forma voluntária as preocupações ambientais, sociais e económicas no desenvolvimento das suas atividades operacionais e das suas interações com as partes interessadas.