Estudo técnico-económico de um sistema solar termoelétrico com back-up a biomassa

Este trabalho consistiu no estudo técnico-económico (dimensionamento) de uma central térmica solar de torre norte, com back-up a biomassa (pellets) para produção de energia elétrica. A partir da plataforma PVGIS obteve-se a irradiação normal direta, DNI, da região do Alentejo, Portugal, segundo critérios descritos na secção 3.1. O valor anual obtido foi de 2319 !"ℎ/%&, valor este que foi convertido em energia elétrica, obtendo-se, assim, um montante de 105.761.800 kWh por ano, em 25 anos. Estas importâncias foram obtidas através dos equipamentos que constituem a central, entre eles o campo solar (composto por 2067 helióstatos com área total de 188097 %&), a torre (convertendo a concentração da DNI para energia térmica ao fluído de transferência de calor, HTF), o bloco de potência (composta por permutador de calor, turbina, gerador elétrico e outros) e com ajuda de uma caldeira a biomassa (pellets) que consome cerca de 24.001,23 toneladas de pellets por ano. O estudo económico foi realizado num modelo executável no Excel, calculando, assim, o custo total do sistema, 138.515.886,87 €. A partir deste valor calcularam-se os indicadores económicos (Valor Atualizado Líquido, VAL=-12.282540,28 €) com uma tarifa bonificada de 0,22114 €/kWh, que indica que o sistema termo solar com back-up a biomassa (pellets) não é viável economicamente (e o mesmo acontece com o sistema termo solar sem a biomassa). O dimensionamento técnico do sistema CSP de torre é feito a partir de um modelo matemático executado em Excel e MatLab e pelo software System Advisor Model, SAM e o da caldeira a pellets é concretizado também no Excel. Os resultados do modelo matemático foram comparados com os valores obtidos no SAM para o mês típico de julho comprovando, assim, as fórmulas e conceitos contidos no estado da arte. Realizou-se, também, uma comparação dos valores anuais do sistema obtidos no SAM com os valores reais da Gemasolar (em Espanha), demonstrando então a veracidade dos valores obtidos no dimensionamento feito para Portugal.

Toxoplasma gondii seropositivity and risk factors in pregnant women followed up by the Family Health Strategy

INTRODUCTION : Toxoplasmosis is a zoonotic infection caused by Toxoplasma gondii. It is transmitted by the ingestion of contaminated water and foods, by soil contaminated with cat feces, especially while handling it, and congenitally via the placenta. The diagnosis of maternal infection is made by serological detection of either IgM or IgG antibodies. This study assessed the seropositivity in pregnant women followed up by the Family Health Strategy (FHS) in Lages, Santa Catarina, Brazil. METHODS: The study was performed in 19 FHS units and included 148 childbearing women. The outcomes evaluated were IgM and IgG seropositivity and behavioral variables. RESULTS: IgG yielded positive results in 16% of the pregnant women, whereas IgM was positive in only 1%. CONCLUSIONS: The 1% IgM positivity rate for T. gondii indicates congenital toxoplasmosis is not common in Lages.

Long-term follow-up of a patient since the acute phase of Chagas disease (South American trypanosomiasis): further treatment and cure of the infection

ABSTRACTA woman had been followed since 1957 for acute phase Chagas disease. Parasitological and serological tests were positive, and treatment included benznidazole in 1974. Following treatment, parasitological test results were negative and conventional serology remained positive until 1994, with subsequent discordant results (1995-1997). The results became consistently negative since 1999. She had an indeterminate chronic form until 1974. Only two minor and transitory nonspecific alterations on electrocardiogram were noted, with the last nine records normal until June 2014. This case confirms the possibility of curing chronic disease and suggests the benefit of specific treatments for preventing long-term morbidity.

Risk-benefit assessment of Bacillus Calmette-Guérin vaccination, anti-phenolic glycolipid I serology, and Mitsuda test response: 10-year follow-up of household contacts of leprosy patients

Abstract: INTRODUCTION: Despite multidrug therapy, leprosy remains a public health issue. The intradermal Bacillus Calmette-Guérin (BCG) vaccine, Mitsuda test (lepromin skin test), and anti-phenolic glycolipid I (PGL-I) serology are widely used in leprosy studies and have shown great epidemiological value. METHODS: This longitudinal study evaluated the relative risks and benefits of these three tools by comparing results observed in household contacts (HHCs) of leprosy patients who developed leprosy with those of HHCs who did not in a population of 2,992 individuals monitored during a 10-year period. RESULTS : Seventy-five (2.5%) new leprosy cases were diagnosed, including 28 (0.9%) co-prevalent cases. Therefore, for the risk-benefit assessment, 47 (1.6%) HHCs were considered as truly diagnosed during follow-up. The comparison between healthy and affected contacts demonstrated that not only did BCG vaccination increase protection, but boosters also increased to 95% relative risk (RR) reduction when results for having two or more scars were compared with having no scars [RR, 0.0459; 95% confidence interval (CI), 0.006-0.338]. Similarly, Mitsuda reactions >7mm in induration presented 7-fold greater protection against disease development compared to reactions of 0-3mm (RR, 0.1446; 95% CI, 0.0566-0.3696). In contrast, anti-PGL-I ELISA seropositivity indicated a 5-fold RR increase for disease outcome (RR, 5.688; 95% CI, 3.2412-9.9824). The combined effect of no BCG scars, Mitsuda reaction of <7mm, and seropositivity to anti-PGL-I increased the risk for leprosy onset 8-fold (RR, 8.109; 95% CI, 5.1167-12.8511). CONCLUSIONS: The adoption of these combined assays may impose measures for leprosy control strategies.

Nutritional follow-up of critically ill infants receiving short term parenteral nutrition

Few studies have tried to characterize the efficacy of parenteral support of critically ill infants during short period of intensive care. We studied seventeen infants during five days of total parenteral hyperalimentation. Subsequently, according to the clinical conditions, the patients received nutritional support by parenteral, enteral route or both up to the 10th day. Evaluations were performed on the 1st, 5th, and 10th days. These included: clinical data (food intake and anthropometric measurements), haematological data (lymphocyte count), biochemical tests (albumin, transferrin, fibronectin, prealbumin, retinol-binding protein) and hormone assays (cortisol, insulin, glucagon). Anthropometric measurements revealed no significant difference between the first and second evaluations. Serum albumin and transferrin did not change significantly, but mean values of fibronectin (8.9 to 16 mg/dL), prealbumin (7.7 to 18 mg/dL), and retinol-binding protein (2.4 to 3.7 mg/dL) increased significantly (p < 0.05) from the 1st to the 10th day. The hormonal study showed no difference for insulin, glucagon, and cortisol when the three evaluations were compared. The mean value of the glucose/insulin ratio was of 25.7 in the 1st day and 15.5 in the 5th day, revealing a transitory supression of this hormone. Cortisol showed values above normal in the beginning of the study. We conclude that the anthropometric parameters were not useful due to the short time of the study; serum proteins, fibronectin, prealbumin, and retinol-binding protein were very sensitive indicators of nutritional status, and an elevated glucose/insulin ratio, associated with a slight tendency for increased cortisol levels suggest hypercatabolic state. The critically ill patient can benefit from an early metabolic support.

Persistent asthma in adults: comparison of high resolution computed tomography of the lungs after one year of follow-up

OBJECTIVE: The aims of this study were to evaluate the role of high resolution computed tomography of the torax in detecting abnormalities in chronic asthmatic patients and to determine the behavior of these lesions after at least one year. METHOD: Fourteen persistent asthmatic patients with a mean forced expiratory volume in 1-second that was 63% of predicted and a mean forced expiratory volume in 1-second /forced vital capacity of 60% had two high resolution computed tomographys separated by an interval of at least one year. RESULTS: All 14 patients had abnormalities on both scans. The most common abnormality was bronchial wall thickening, which was present in all patients on both computed tomographys. Bronchiectasis was suggested on the first computed tomography in 5 of the 14 (36%) patients, but on follow-up, the bronchial dilatation had disappeared in 2 and diminished in a third. Only one patient had any emphysematous changes; a minimal persistent area of paraseptal emphysema was present on both scans. In 3 patients, a "mosaic" appearance was observed on the first scan, and this persisted on the follow-up computed tomography. Two patients had persistent areas of mucoid impaction. In a third patient, mucus plugging was detected only on the second computed tomography. CONCLUSIONS: We conclude that there are many abnormalities on the high resolution computed tomography of patients with persistent asthma. Changes suggestive of bronchiectasis, namely bronchial dilatation, frequently resolve spontaneously. Therefore, the diagnosis of bronchiectasis by high resolution computed tomography in asthmatic patients must be made with caution, since bronchial dilatation can be reversible or can represent false dilatation. Nonsmoking chronic asthmatic subjects in this study had no evidence of centrilobular or panacinar emphysema.

Parosteal osteosarcoma with myocardial metastasis 13 years after follow-up

PURPOSE: To report the case of a woman with a diagnosis of grade II (low grade) parosteal osteosarcoma with the occurrence of myocardial metastasis 13 years after resection, and to present a review of the existing literature on the subject. METHODS: Description of the case and review of the literature. CONCLUSION: The review leads to the conclusion that the occurrence of metastasis from parosteal osteosarcoma can occur in up to 38% of the cases, in spite of its relatively low aggressiveness. However, myocardial metastasis of a parosteal osteosarcoma is an event that was not found in the literature.

Dura mater mitral and tricuspid bioprostheses: 30 years of follow-up

PURPOSE: The dura mater bioprosthesis was developed in the Department of Cardiopneumology of the Hospital das Clínicas of the University of São Paulo Medical School in 1971. Here, we present the clinical results of the dura mater bioprosthesis over 30 years of follow-up. METHODS: We studied 70 consecutive patients who underwent mitral or tricuspid valve replacement with a dura mater bioprosthesis between January 1971 and August 1972. RESULTS: The early mortality was 10% (7 patients). The follow-up was 87% complete (9 patients were lost to follow-up). Two patients were alive and asymptomatic 30 years after valve replacement; 33 patients underwent reoperations due to valve dysfunction, and 19 died during the follow-up period. At 30 years, the actuarial survival was 49.2 ± 8.6%; freedom from rupture, 27.0 ± 10.2%; freedom from calcification, 78.8 ± 8.6%; and freedom from reoperation, 18.8 ± 7.5%. CONCLUSIONS: The dura mater bioprosthesis played an important role in the treatment of patients with mitral and tricuspid valve disease. The low rate of thromboembolism and the long period of follow-up without evidence of valve dysfunction, which occurred for several of our patients, are important characteristics of these bioprosthesis.

Noble energy oil & Gas

Equity research report

A liberalização do mercado energético e o papel das entidades reguladoras

The liberalisation of the energy market goes back to the 1990s, when it was impelled by the European legislator. Since then, three legislative packages, temporarily successive, were approved. Those packages contained the measures to be implemented in order to deepen the internal energy market. Besides the opening up of several national markets to competition, the European legislator aimed the creation of a real internal energy market within the European Union. The unbundling regime was one of the most important steps with respect to the liberalisation process. The introduction of these rules ensured independence to the various market operators. A real and effective right of choice was granted to the consumers so they may choose their electricity and natural gas supplier. Therefore, the activity of comercialisation is subject to competition. However, some activities of the electricity’s and natural gas’ chain of value, namely the activities of transportation and distribution, were kept under regulation rules. Even though it may seem odd, the assignment of important competences and strong powers to a regulatory authority was essential in order to achieve the liberalisation process’ goals. Electricity and natural gas are essential public goods; therefore the market operators are legally bound to public service obligations, such as the security, the universality and the continuity of the supply. The performance of these obligations may become, in some cases, unprofitable for those operators. For such reason, the protection of the consumers’ rights shall only be properly defended if there is a regulatory authority that monitors the behaviour of the operators and sanctions the failure to comply with the public service obligations. Portugal, as a Member State of the European Union, transposed into the national legal order the European directives concerning the liberalisation process. This transposition has caused radical changes to the electricity and natural gas’ national markets. The Entidade Reguladora dos Serviços Energéticos also suffered various mutations in order to keep up with the regulatory demands regarding the liberalisation process.

Organic-inorganic nanostructured multilayers for calcium phosphate biomineralization

The weak fixation of biomaterials within the bone structure is one of the major reasons of implants failures. Calcium phosphate (CaP) coatings are used in bone tissue engineering to improve implant osseointegration by enhancing cellular adhesion, proliferation and differentiation, leading to a tight and stable junction between implant and host bone. It has also been observed that materials compatible with bone tissue either have a CaP coating or develop such a calcified surface upon implantation. Thus, the development of bioactive coatings becomes essential for further improvement of integration with the surrounding tissue. However, most of current applied CaP coatings methods (e.g. physical vapor deposition), cannot be applied to complex shapes and porous implants, provide poor structural control over the coating and prevent incorporation of bioactive organic compounds (e.g. antibiotics, growth factors) because of the used harsh processing conditions. Layer-by-layer (LbL) is a versatile technology that permits the building-up of multilayered polyelectrolyte films in mild conditions based on the alternate adsorption of cationic and anionic elements that can integrate bioactive compounds. As it is recognized in natureâ s biomineralization process the presence of an organic template to induce mineral deposition, this work investigate a ion based biomimetic method where all the process is based on LbL methodology made of weak natural-origin polyelectrolytes. A nanostructured multilayer component, with 5 or 10 bilayers, was produced initially using chitosan and chondroitin sulphate polyelectrolyte biopolymers, which possess similarities with the extracellular matrix and good biocompatibility. The multilayers are then rinsed with a sequential passing of solutions containing Ca2+ and PO43- ions. The formation of CaP over the polyelectrolyte multilayers was confirmed by QCM-D, SEM and EDX. The outcomes show that 10 polyelectrolyte bilayer condition behaved as a  better site for initiating the formation of CaP as the precipitation occur at earlier stages than in 5 polyelectrolyte bilayers one. This denotes that higher number of bilayers could hold the CaP crystals more efficiently. This work achieved uniform coatings that can be applied to any surface with access to the liquid media in a low-temperature method, which potentiates the manufacture of effective bioactive biomaterials with great potential in orthopedic applications.

O "Check-up" do conhecimento: aprender e avaliar

Relatório de estágio de mestrado em Educação Pré-Escolar e Ensino do 1.º do Ensino Básico

Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions

Buildings are responsible for more than 40% of the energy consumption and greenhouse gas emissions. Thus, increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials could constitute the most effective way of reducing heat losses in buildings by minimising heat energy needs. These materials have a thermal conductivity factor, k (W/m.K) lower than 0.065 while other insulation materials such as aerated concrete can go up to 0.11. Current insulation materials are associated with negative impacts in terms of toxicity. Polystyrene, for example contains anti-oxidant additives and ignition retardants. In addition, its production involves the generation of benzene and chlorofluorocarbons. Polyurethane is obtained from isocyanates, which are widely known for their tragic association with the Bhopal disaster. Besides current insulation materials releases toxic fumes when subjected to fire. This paper presents experimental results on one-part geopolymers. It also includes global warming potential assessment and cost analysis. The results show that only the use of aluminium powder allows the production mixtures with a high compressive strength however its high cost means they are commercially useless when facing the competition of commercial cellular concrete. The results also show that one-part geopolymer mixtures based on 26%OPC +58.3%FA +8%CS +7.7%CH and 3.5% hydrogen peroxide constitute a promising cost efficient (67 euro/m3), thermal insulation solution for floor heating systems with low global warming potential of 443 KgCO2eq/m3.

Sustainability education in PBL education: the case study of IEM-UMINHO

Sustainability-related skills are becoming more and more relevant for a proficient and professional engineering practice. Industrial engineers in particular, given their broad field of intervention and being at the heart of industrial activity, hold a great deal of potential and responsibility in providing and delivering best industrial practices, that support enhanced industrial systems and products. Therefore making a real contribution in generating wealth and income for all the companies’ stakeholders, including local communities, as well as adding up to more sustainable ecosystems. Previous work by the authors focused on studying the inclusion of this subject on the education of industrial engineers, especially through active-learning methodologies, as well as presenting results on the use of one such approach. The study conducted tried to identify the impacts on sustainability learning using a given specific activity, i.e. a workshop on industrial ecology, held in the 2014/2015 academic year on the Integrated MSc degree on Industrial Engineering and Management at the University of Minho, Portugal. The study uses content analysis of student teams’ reports for two consecutive academic years. The former did not include one such workshop, while the latter did. The Fink taxonomy was used in the discussion of results and reflection. The study outcomes aimed at supporting decision making on worthiness of investment on similar education instruments for sustainability competency development. Some results of the study highlight that: (1) the workshop seem to globally have a positive contribution on the sustainability learning; (2) a number of dimensions of the Life cycle design strategy wheel was developed, but the approach was not broadly used, (3) There was a mismatch on the workshop schedule; (4) students enjoy the workshop; (5) a clearer endorsement on relevance of this aspect is required. Suggestions for future work are also issued.

Engineering of fatty acid production and secretion in Saccharomyces cerevisiae

Tese de Doutoramento em Ciências - Especialidade em Biologia