Influence of Outlet Boundary Conditions on Cerebrovascular Aneurysm Hemodynamics

Computational fluid dynamic (CFD) studies of blood flow in cerebrovascular aneurysms have potential to improve patient treatment planning by enabling clinicians and engineers to model patient-specific geometries and compute predictors and risks prior to neurovascular intervention. However, the use of patient-specific computational models in clinical settings is unfeasible due to their complexity, computationally intensive and time-consuming nature. An important factor contributing to this challenge is the choice of outlet boundary conditions, which often involves a trade-off between physiological accuracy, patient-specificity, simplicity and speed. In this study, we analyze how resistance and impedance outlet boundary conditions affect blood flow velocities, wall shear stresses and pressure distributions in a patient-specific model of a cerebrovascular aneurysm. We also use geometrical manipulation techniques to obtain a model of the patient’s vasculature prior to aneurysm development, and study how forces and stresses may have been involved in the initiation of aneurysm growth. Our CFD results show that the nature of the prescribed outlet boundary conditions is not as important as the relative distributions of blood flow through each outlet branch. As long as the appropriate parameters are chosen to keep these flow distributions consistent with physiology, resistance boundary conditions, which are simpler, easier to use and more practical than their impedance counterparts, are sufficient to study aneurysm pathophysiology, since they predict very similar wall shear stresses, time-averaged wall shear stresses, time-averaged pressures, and blood flow patterns and velocities. The only situations where the use of impedance boundary conditions should be prioritized is if pressure waveforms are being analyzed, or if local pressure distributions are being evaluated at specific time points, especially at peak systole, where the use of resistance boundary conditions leads to unnaturally large pressure pulses. In addition, we show that in this specific patient, the region of the blood vessel where the neck of the aneurysm developed was subject to abnormally high wall shear stresses, and that regions surrounding blebs on the aneurysmal surface were subject to low, oscillatory wall shear stresses. Computational models using resistance outlet boundary conditions may be suitable to study patient-specific aneurysm progression in a clinical setting, although several other challenges must be addressed before these tools can be applied clinically.

Bridging the Scale Gap from Leaf to Canopy in Biosphere-Atmosphere Gas and Particle Exchanges

Terrestrial ecosystems, occupying more than 25% of the Earth's surface, can serve as

`biological valves' in regulating the anthropogenic emissions of atmospheric aerosol

particles and greenhouse gases (GHGs) as responses to their surrounding environments.

While the signicance of quantifying the exchange rates of GHGs and atmospheric

aerosol particles between the terrestrial biosphere and the atmosphere is

hardly questioned in many scientic elds, the progress in improving model predictability,

data interpretation or the combination of the two remains impeded by

the lack of precise framework elucidating their dynamic transport processes over a

wide range of spatiotemporal scales. The diculty in developing prognostic modeling

tools to quantify the source or sink strength of these atmospheric substances

can be further magnied by the fact that the climate system is also sensitive to the

feedback from terrestrial ecosystems forming the so-called `feedback cycle'. Hence,

the emergent need is to reduce uncertainties when assessing this complex and dynamic

feedback cycle that is necessary to support the decisions of mitigation and

adaptation policies associated with human activities (e.g., anthropogenic emission

controls and land use managements) under current and future climate regimes.

With the goal to improve the predictions for the biosphere-atmosphere exchange

of biologically active gases and atmospheric aerosol particles, the main focus of this

dissertation is on revising and up-scaling the biotic and abiotic transport processes

from leaf to canopy scales. The validity of previous modeling studies in determining

iv

the exchange rate of gases and particles is evaluated with detailed descriptions of their

limitations. Mechanistic-based modeling approaches along with empirical studies

across dierent scales are employed to rene the mathematical descriptions of surface

conductance responsible for gas and particle exchanges as commonly adopted by all

operational models. Specically, how variation in horizontal leaf area density within

the vegetated medium, leaf size and leaf microroughness impact the aerodynamic attributes

and thereby the ultrane particle collection eciency at the leaf/branch scale

is explored using wind tunnel experiments with interpretations by a porous media

model and a scaling analysis. A multi-layered and size-resolved second-order closure

model combined with particle

uxes and concentration measurements within and

above a forest is used to explore the particle transport processes within the canopy

sub-layer and the partitioning of particle deposition onto canopy medium and forest

oor. For gases, a modeling framework accounting for the leaf-level boundary layer

eects on the stomatal pathway for gas exchange is proposed and combined with sap

ux measurements in a wind tunnel to assess how leaf-level transpiration varies with

increasing wind speed. How exogenous environmental conditions and endogenous

soil-root-stem-leaf hydraulic and eco-physiological properties impact the above- and

below-ground water dynamics in the soil-plant system and shape plant responses

to droughts is assessed by a porous media model that accommodates the transient

water

ow within the plant vascular system and is coupled with the aforementioned

leaf-level gas exchange model and soil-root interaction model. It should be noted

that tackling all aspects of potential issues causing uncertainties in forecasting the

feedback cycle between terrestrial ecosystem and the climate is unrealistic in a single

dissertation but further research questions and opportunities based on the foundation

derived from this dissertation are also brie

y discussed.

Thermal conductivity of ODP Leg 110 holes

Thirty-four sediment and mudline temperatures were collected from six drill holes on ODP Leg 110 near the toe of the Barbados accretionary complex. When combined with thermal conductivity measurements these data delineate the complicated thermal structure on the edge of this convergent margin. Surface heat-flow values from Leg 110 (calculated from geothermal gradients forced through the bottom-water temperature at mudline) of 92 to 192 mW/m**2 are 80% to 300% higher than values predicted by standard heat flow vs. age models for oceanic crust, but are compatible with earlier surface measurements made at the same latitude. Measured heat flow tends to decrease downhole at four sites, suggesting the presence of heat sources within the sediments. These results are consistent with the flow of warm fluid through the complex along sub-horizontal, high-permeability conduits, including thrust faults, the major decollement zone, and sandy intervals. Simple calculations suggest that this flow is transient, occurring on time scales of tens to tens of thousands of years. High heat flow in the vicinity of 15°30'N and not elsewhere along the deformation front suggests that the Leg 110 drill sites may be situated over a fluid discharge zone, with dewatering more active here than elsewhere along the accretionary complex.

Learning Environments in Design Studio Culture

The paper reports on a study of design studio culture from a student perspective. Learning in design studio culture has been theorised variously as a signature pedagogy emulating professional practice models, as a community of practice and as a form of problem-based learning, all largely based on the study of teaching events in studio. The focus of this research has extended beyond formally recognized activities to encompass the student’s experience of their social and community networks, working places and study set-ups, to examine how these have contributed to studio culture and how there have been supported by studio teaching. Semi-structured interviews with final year undergraduate students of architecture formed the basis of the study using an interpretivist approach informed by Actor-network theory, with studio culture featured as the focal actor, enrolling students and engaging with other actors, together constituting an actor-network of studio culture. The other actors included social community patterns and activities; the numerous working spaces (including but not limited to the studio space itself); the equipment, tools of trade and material pre-requisites for working; the portfolio enrolling the other actors to produce work for it; and the various formal and informal events associated with the course itself. Studio culture is a highly charged social arena: The question is how, and in particular, which aspects of it support learning? Theoretical models of situated learning and communities of practice models have informed the analysis, with Bourdieu’s theory of practice, and his interrelated concepts of habitus, field and capital providing a means of relating individually acquired habits and modes of working to social contexts. Bourdieu’s model of habitus involves the externalisation through the social realm of habits and knowledge previously internalised. It is therefore a useful model for considering whole individual learning activities; shared repertoires and practices located in the social realm. The social milieu of the studio provides a scene for the exercise and display of ‘practicing’ and the accumulation of a form of ‘practicing-capital’. This capital is a property of the social milieu rather than the space, so working or practicing in the company of others (in space and through social media) becomes a more valued aspect of studio than space or facilities alone. This practicing-capital involves the acquisition of a habitus of studio culture, with the transformation of physical practices or habits into social dispositions, acquiring social capital (driving the social milieu) and cultural capital (practicing-knowledge) in the process. The research drew on students’ experiences, and their practicing ‘getting a feel for the game’ by exploring the limits or boundaries of the field of studio culture. The research demonstrated that a notional studio community was in effect a social context for supporting learning; a range of settings to explore and test out newly internalised knowledge, demonstrate or display ideas, modes of thinking and practicing. The study presents a nuanced interpretation of how students relate to a studio culture that involves a notional community, and a developing habitus within a field of practicing that extends beyond teaching scenarios.

Underway spectrophotometry along the Atlantic Meridional Transect reveals high performance in satellite chlorophyll retrievals

To evaluate the performance of ocean-colour retrievals of total chlorophyll-a concentration requires direct comparison with concomitant and co-located in situ data. For global comparisons, these in situ match-ups should be ideally representative of the distribution of total chlorophyll-a concentration in the global ocean. The oligotrophic gyres constitute the majority of oceanic water, yet are under-sampled due to their inaccessibility and under-represented in global in situ databases. The Atlantic Meridional Transect (AMT) is one of only a few programmes that consistently sample oligotrophic waters. In this paper, we used a spectrophotometer on two AMT cruises (AMT19 and AMT22) to continuously measure absorption by particles in the water of the ship's flow-through system. From these optical data continuous total chlorophyll-a concentrations were estimated with high precision and accuracy along each cruise and used to evaluate the performance of ocean-colour algorithms. We conducted the evaluation using level 3 binned ocean-colour products, and used the high spatial and temporal resolution of the underway system to maximise the number of match-ups on each cruise. Statistical comparisons show a significant improvement in the performance of satellite chlorophyll algorithms over previous studies, with root mean square errors on average less than half (~ 0.16 in log10 space) that reported previously using global datasets (~ 0.34 in log10 space). This improved performance is likely due to the use of continuous absorption-based chlorophyll estimates, that are highly accurate, sample spatial scales more comparable with satellite pixels, and minimise human errors. Previous comparisons might have reported higher errors due to regional biases in datasets and methodological inconsistencies between investigators. Furthermore, our comparison showed an underestimate in satellite chlorophyll at low concentrations in 2012 (AMT22), likely due to a small bias in satellite remote-sensing reflectance data. Our results highlight the benefits of using underway spectrophotometric systems for evaluating satellite ocean-colour data and underline the importance of maintaining in situ observatories that sample the oligotrophic gyres.

Underway spectrophotometry along the Atlantic Meridional Transect reveals high performance in satellite chlorophyll retrievals

To evaluate the performance of ocean-colour retrievals of total chlorophyll-a concentration requires direct comparison with concomitant and co-located in situ data. For global comparisons, these in situ match-ups should be ideally representative of the distribution of total chlorophyll-a concentration in the global ocean. The oligotrophic gyres constitute the majority of oceanic water, yet are under-sampled due to their inaccessibility and under-represented in global in situ databases. The Atlantic Meridional Transect (AMT) is one of only a few programmes that consistently sample oligotrophic waters. In this paper, we used a spectrophotometer on two AMT cruises (AMT19 and AMT22) to continuously measure absorption by particles in the water of the ship's flow-through system. From these optical data continuous total chlorophyll-a concentrations were estimated with high precision and accuracy along each cruise and used to evaluate the performance of ocean-colour algorithms. We conducted the evaluation using level 3 binned ocean-colour products, and used the high spatial and temporal resolution of the underway system to maximise the number of match-ups on each cruise. Statistical comparisons show a significant improvement in the performance of satellite chlorophyll algorithms over previous studies, with root mean square errors on average less than half (~ 0.16 in log10 space) that reported previously using global datasets (~ 0.34 in log10 space). This improved performance is likely due to the use of continuous absorption-based chlorophyll estimates, that are highly accurate, sample spatial scales more comparable with satellite pixels, and minimise human errors. Previous comparisons might have reported higher errors due to regional biases in datasets and methodological inconsistencies between investigators. Furthermore, our comparison showed an underestimate in satellite chlorophyll at low concentrations in 2012 (AMT22), likely due to a small bias in satellite remote-sensing reflectance data. Our results highlight the benefits of using underway spectrophotometric systems for evaluating satellite ocean-colour data and underline the importance of maintaining in situ observatories that sample the oligotrophic gyres.

Estrategias de visibilización y procesos de identificación boliviana en la prensa gráfica y en la red social Facebook, en dos ciudades del centro de la provincia de Buenos Aires, Argentina

Los usos y las formas de identificación intra y extra grupo a través de los medios de comunicación son aspectos escasamente explorados en los estudios sobre las identidades en ciudades de tipo intermedias del centro de la provincia de Buenos Aires, Argentina. Por ello, el objetivo de este trabajo consiste en analizar y discutir los modos en que se visibilizan y construyen las representaciones y manifestaciones de los inmigrantes y descendientes bolivianos, específicamente en la red social Facebook y en la prensa gráfica local de las ciudades de Olavarría y Azul. Se pretende contribuir a la comprensión de la manera en que se producen los diversos discursos y saberes de estos grupos, así como identificar a estos medios de comunicación como instrumentos que posibilitan intervenir desde otros espacios de reconocimiento y legitimidad.

Employer Branding idag : Attraktivitet genom sociala medier

The use of social media has during the last couple of years increased and is now a major part of most of the organizations marketing strategies. But how does this fit with the Employer Branding strategies? And how does this affect the organizational attractiveness as an employer? These were two of the questions we wanted to examine and analyze. In order to answer these questions, we conducted interviews with six different companies divided into 3 subgroups. The intention of this was to get a wider perspective of how the implementation of social media in the Employer Branding could work. And could this change the recruitment process? What we could see afterwards is that more time is spent on taking references online through social media sites. Some say it is more honest than the traditional references that the candidate got to choose. Other conclusions that we could find was that it is important to use social media in todays market but it is crucial to use it in a proper way. Companies must form a strategy based on their Employee Value Proposition in order to reach the wanted receivers using social media. It is also important that the Employee Value Proposition is based on the companies’ corporate values.

Design and Experimental Investigation of a Hydroxyl Ammonium Nitrate Based Workhorse Microthruster

Thesis (Master's)--University of Washington, 2016-08

Sosiaalisen median yksilöbrändin merkitys työnhaussa ja yritysten näkökanta työntekijän sosiaalisen median käyttäytymiselle

Työn tavoitteena oli tutkia, kuinka yksilön brändi muodostuu sosiaalisessa mediassa ja mitä sosiaalisen median kanavia suositaan työnhakijoiden ja yritysten keskuudessa. Haettiin myös alueellisilta yrityksiltä vastausta siihen, perehdyttävätkö he uusia työntekijöitä sosiaalisen median käyttäytymisessä. Tietolähteinä käytettiin brändin luomiseen ja sosiaalisen median strategiaan keskittyvää kirjallisuutta sekä yrityksien ja opiskelijoiden haastatteluja. Työn tuloksina todettiin suosituimmiksi kanaviksi itsensä markkinointiin verkostoitumispalvelu LinkedIn. Yritykset korostivat omien projektien merkitystä osaamisen näyttämisessä työnhaussa ja hyvin viestittyä persoonallisuutta hakemuksissa arvostettiin.

Shapes and Dynamics of Blood Cells in Poiseuille and Shear Flows

The dynamics, shape, deformation, and orientation of red blood cells in microcirculation affect the rheology, flow resistance and transport properties of whole blood. This leads to important correlations of cellular and continuum scales. Furthermore, the dynamics of RBCs subject to different flow conditions and vessel geometries is relevant for both fundamental research and biomedical applications (e.g drug delivery). In this thesis, the behaviour of RBCs is investigated for different flow conditions via computer simulations. We use a combination of two mesoscopic particle-based simulation techniques, dissipative particle dynamics and smoothed dissipative particle dynamics. We focus on the microcapillary scale of several μm. At this scale, blood cannot be considered at the continuum but has to be studied at the cellular level. The connection between cellular motion and overall blood rheology will be investigated. Red blood cells are modelled as viscoelastic objects interacting hydrodynamically with a viscous fluid environment. The properties of the membrane, such as resistance against bending or shearing, are set to correspond to experimental values. Furthermore, thermal fluctuations are considered via random forces. Analyses corresponding to light scattering measurements are performed in order to compare to experiments and suggest for which situations this method is suitable. Static light scattering by red blood cells characterises their shape and allows comparison to objects such as spheres or cylinders, whose scattering signals have analytical solutions, in contrast to those of red blood cells. Dynamic light scattering by red blood cells is studied concerning its suitability to detect and analyse motion, deformation and membrane fluctuations. Dynamic light scattering analysis is performed for both diffusing and flowing cells. We find that scattering signals depend on various cell properties, thus allowing to distinguish different cells. The scattering of diffusing cells allows to draw conclusions on their bending rigidity via the effective diffusion coefficient. The scattering of flowing cells allows to draw conclusions on the shear rate via the scattering amplitude correlation. In flow, a RBC shows different shapes and dynamic states, depending on conditions such as confinement, physiological/pathological state and cell age. Here, two essential flow conditions are studied: simple shear flow and tube flow. Simple shear flow as a basic flow condition is part of any more complex flow. The velocity profile is linear and shear stress is homogeneous. In simple shear flow, we find a sequence of different cell shapes by increasing the shear rate. With increasing shear rate, we find rolling cells with cup shapes, trilobe shapes and quadrulobe shapes. This agrees with recent experiments. Furthermore, the impact of the initial orientation on the dynamics is studied. To study crowding and collective effects, systems with higher haematocrit are set up. Tube flow is an idealised model for the flow through cylindric microvessels. Without cell, a parabolic flow profile prevails. A single red blood cell is placed into the tube and subject to a Poiseuille profile. In tube flow, we find different cell shapes and dynamics depending on confinement, shear rate and cell properties. For strong confinements and high shear rates, we find parachute-like shapes. Although not perfectly symmetric, they are adjusted to the flow profile and maintain a stationary shape and orientation. For weak confinements and low shear rates, we find tumbling slippers that rotate and moderately change their shape. For weak confinements and high shear rates, we find tank-treading slippers that oscillate in a limited range of inclination angles and strongly change their shape. For the lowest shear rates, we find cells performing a snaking motion. Due to cell properties and resultant deformations, all shapes differ from hitherto descriptions, such as steady tank-treading or symmetric parachutes. We introduce phase diagrams to identify flow regimes for the different shapes and dynamics. Changing cell properties, the regime borders in the phase diagrams change. In both flow types, both the viscosity contrast and the choice of stress-free shape are important. For in vitro experiments, the solvent viscosity has often been higher than the cytosol viscosity, leading to a different pattern of dynamics, such as steady tank-treading. The stress-free state of a RBC, which is the state at zero shear stress, is still controversial, and computer simulations enable direct comparisons of possible candidates in equivalent flow conditions.

The millennial mum: technology use by new mothers

Becoming a mother presents a woman with new challenges and a need to access new sources of information. This work considers the increase in the use of online parenting support as the first group of millennials become parents. Initial results from a survey comparing the use of technology pre and post the experience of childbirth is presented. The survey reveals that mothers are likely to increase the time they spend online and are strongly motivated by seeking social contact. The paper concludes by considering the implications of this survey for healthcare professionals wishing to give information and support through online media and suggests how HCI professionals can become involved in this work.

Estudo numérico do escoamento em descarregadores por orifício

Atualmente, no estudo do comportamento de descarregadores de cheias por orifício, é necessário conhecer as pressões ao longo do descarregador, para várias alturas de água na albufeira. Este tipo de estudos tem sido usualmente realizado recorrendo a ensaios experimentais. No entanto, a utilização de modelos numéricos para a simulação do escoamento em estruturas hidráulicas encontra-se numa fase emergente. Neste sentido, a presente dissertação pretende apresentar um estudo numérico relativo ao escoamento em descarregadores de cheias por orifício. Por forma a efetuar o estudo numérico, foi utlizado o programa comercial de CFD FLOW-3D®, reproduzindo um modelo reduzido construído no Laboratório Nacional de Engenharia Civil (LNEC) correspondente a um descarregador por orifício. Para a realização das simulações numéricas foi necessário definir o objeto de estudo, a malha de cálculo, as condições de fronteira e as propriedades do fluido e objeto de modo a reproduzir as situações ensaiadas experimentalmente no LNEC. A proximidade dos resultados experimentais e numéricos para vários níveis de água na albufeira permitiu validar o modelo numérico para este tipo de escoamentos no interior do orifício.

Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools

The machining of hardened steel is becoming increasingly important in manufacturing processes. Machined parts made with hardened steel are often subjected to high service demands, which require great resistance and quality. The machining of this material submits the tools to high mechanical and thermal loads, which increases the tool wear and affects the surface integrity of the part. In that context, this work presents a study of drilling of AISI P20 steel with carbide tools, analyzing the effects on the process caused by the reduction of cutting fluid supply and its relation with the tool wear and the surface integrity of the piece. The major problem observed in the tests was a difficulty for chips to flow through the drill flute, compromising their expulsion from the hole. After a careful analysis, a different machining strategy was adopted to solve the problem

Contenido de la información que sobre arte contemporáneo se emite a través de los medios digitales El Comercio de Ecuador y El País de España

A diferencia de hace algunos años atrás, ahora se puede acceder a noticias sobre el arte contemporáneo, de varias regiones del mundo, a través de medios digitales. El arte en esta época no tiene linderos y sus prácticas fundamentadas en mecanismos múltiples de producción requieren de un acompañamiento de los medios para que el público se mantenga en contacto con las distintas corrientes y el quehacer de los artistas contemporáneos. Nos interesa definir el contenido de la información que sobre arte contemporáneo se difunde en dos medios digitales: El Comercio de Ecuador y El País de España, que, de acuerdo con la experiencia del autor de esta investigación, son diarios referentes de los dos países, en el tratamiento del arte contemporáneo al superar en su agenda cultural a otros medios. La observación permite contrastar entre los periódicos seleccionados las formas de utilización de las herramientas multimedios y los temas que preferentemente se publican relacionados con el arte contemporáneo.