High Performance Concret Bridge Deck Overlays for County Bridges, October 2007

The Iowa Method for bridge deck overlays has been very successful in Iowa since its adoption in the 1970s. This method involves removal of deteriorated portions of a bridge deck followed by placement of a layer of den (Type O) Portland Cement Concrete (PCC). The challenge encountered with this type of bridge deck overlay is that the PCC must be mixed on-site, brought to the placement area and placed with specialized equipment. This adds considerably to the cost and limits contractor selection. A previous study (TR-427) showed that a dense PCC with high-range water reducers could successfully be used for bridge deck overlays using conventional equipment and methods. This current study evaluated the use of high performance PCC in place of a dense PCC for work on county bridges. High performance PCC uses fly ash and slag to replace some of the cement in the mix. This results in a workable PCC mix that cures to form a very low permeability overlay.

Translation to success of surgical innovation.

Contemporary thoracic and cardiovascular surgery uses extensive equipment and devices to enable its performance. As the specialties develop and new frontiers are crossed, the technology needs to advance in a parallel fashion. Strokes of genius or problem-solving brain-storming may generate great ideas, but the metamorphosis of an idea into a physical functioning tool requires a lot more than just a thinking process. A modern surgical device is the end-point of a sophisticated, complicated and potentially treacherous route, which incorporates new skills and knowledge acquisition. Processes including technology transfer, commercialisation, corporate and product development, intellectual property and regulatory routes all play pivotal roles in this voyage. Many good ideas may fall by the wayside for a multitude of reasons as they may not be marketable or may be badly marketed. In this article, we attempt to illuminate the components required in the process of surgical innovation, which we believe must remain in the remit of the modern-day thoracic and cardiovascular surgeon.

The fixation of locally beneficial alleles in a metapopulation.

Extinction, recolonization, and local adaptation are common in natural spatially structured populations. Understanding their effect upon genetic variation is important for systems such as genetically modified organism management or avoidance of drug resistance. Theoretical studies on the effect of extinction and recolonization upon genetic variance started appearing in the 1970s, but the role of local adaptation still has no good theoretical basis. Here we develop a model of a haploid species in a metapopulation in which a locally adapted beneficial allele is introduced. We study the effect of different spatial patterns of local adaptation, and different metapopulation dynamics, upon the fixation probability of the beneficial allele. Controlling for the average selection pressure, we find that a small area of positive selection can significantly increase the global probability of fixation. However, local adaptation becomes less important as extinction rate increases. Deme extinction and recolonization have a spatial smoothing effect that effectively reduces spatial variation in fitness.

Living Near A Vineyard

It is widely assumed that living in rural Iowa means you live near a field of corn or soybeans. It is common to see large equipment during spring and fall and most people are aware that care should be given when using certain pesticides near these fields. In general, most everyone knows what to expect. Now there’s something new dotting the Iowa landscape . . . Vineyards! Like row crops, vineyards also use farm equipment and pesticides. We would like to take you on a written tour of what you might expect in a vineyard throughout our growing season. For a “real” tour, contact a local grape grower!

The yield of high-density electric source imaging in focal epilepsy

Background: EEG is the cornerstone of epilepsy diagnostics and mandatory to determine the underlying epilepsy syndrome (e.g. focal vs idiopathic generalized). However, its potential as imaging tool is still underrecognized. In the present study, we aim to determine the prerequisites of maximal benefit of electric source imaging (ESI) to localize the irritative zone in patients with focal epilepsy. Methods: 150 patients suffering from focal epilepsy and with minimum 1 year post-operative follow-up were studied prospectively by reviewers blinded to the underlying diagnosis and outcome. We evaluated the influence of two important factors on sensitivity and specificity of ESI: the number of electrodes (low resolution, LR-ESI: \30 vs. high resolution, HR-ESI: 128-256 electrodes), and the use of individual MRI (i-MRI) vs. template MRI (t-MRI) as head model.Results: ESI had a sensitivity of 85% and a specificity of 87% when HR-ESI with i-MRI was used. Using LR-ESI, sensitivity decreased to 68%, or even 57% when only t-MRI was available. The sensitivity of HR-ESI/i-MRI compared favorably with those of MRI (76%), PET (69%) and ictal/interictal SPECT (64%).Interpretation: This study on a large patient group shows excellent sensitivity and specificity of ESI if 128 EEG channels or more are used for ESI and if the results are co-registered to the patient's individual MRI. Localization precision is as high as or even higher than established brain imaging techniques, providing excellent costeffectiveness in epilepsy evaluation. HR-ESI appears to be a valuable additional imaging tool, given that larger electrode arrays are easily and rapidly applied with modern EEG equipment and that structural MRI is nearly always available for these patients.

Sistemes encastats en temps real

Resum En l’actualitat, els sistemes electrònics de processament de dades són cada cop més significatius dins del sector industrial. Són moltes les necessitats que sorgeixen en el món dels sistemes d’autentificació, de l’electrònica aeronàutica, d’equips d’emmagatzemament de dades, de telecomunicacions, etc. Aquestes necessitats tecnològiques exigeixen ser controlades per un sistema fiable, robust, totalment dependent amb els esdeveniments externs i que compleixi correctament les restriccions temporals imposades per tal de que realitzi el seu propòsit d’una manera eficient. Aquí és on entren en joc els sistemes encastats en temps real, els quals ofereixen una gran fiabilitat, disponibilitat, una ràpida resposta als esdeveniments externs del sistema, una alta garantia de funcionament i una àmplia possibilitat d’aplicacions. Aquest projecte està pensat per a fer una introducció al món dels sistemes encastats, com també explicar el funcionament del sistema operatiu en temps real FreeRTOS; el qual utilitza com a mètode de programació l’ús de tasques independents entre elles. Donarem una visió de les seves característiques de funcionament, com organitza tasques mitjançant un scheduler i uns exemples per a poder dissenyar-hi aplicacions.

Tecnologies de la informació (barates) aplicades a les persones amb necessitats especials

As a consequence of the lack of adequate support, many people with physical or sensorial difficulties frequently encounter obstacles to using information technologies. Today equipment and programmes exist for overcoming these barriers, but frequently they are too expensive for the economic limitations of our smaller libraries, document centres, archives, museums, etc. An inexpensive alternative can be found in the accessibility options incorporated into Windows. While these probably do not offer the best or the most adequate solutions, it can be argued that, they are an acceptable alternative, considering existing budget restrictions. This text describes the functionalities of Windows XP, grouping them according to the type of difficulty addressed (visual, motor or auditory) in order to facilitate access to the application.

Iowa Technology Governance Board Annual Report, January 12, 2009

This Technology Governance Board Annual Report provides information on the FY06 – FY10 Information Technology Personnel Spending; FY06 – FY10 Technology Equipment and Services Spending; and FY06 – FY10 Internal IT Expenditures with the Iowa Communications Network and Department of Administrative Services - Information Technology Enterprise. The report also contains a projection of technology cost savings. This report was produced in compliance with Iowa Code §8A.204(3a) and was submitted to the Governor, the Department of Management, and the General Assembly on January 12, 2009.

Iowa Technology Governance Board Annual Report, January 11, 2010

This Technology Governance Board Annual Report provides information on the FY07 – FY11 Information Technology Personnel Spending; FY07 – FY11 Technology Equipment and Services Spending; and FY07 – FY11 Internal IT Expenditures with the Iowa Communications Network and Department of Administrative Services - Information Technology Enterprise. The report also contains a projection of technology cost savings. This report was produced in compliance with Iowa Code §8A.204(3a) and was submitted to the Governor, the Department of Management, and the General Assembly on January 11, 2010.

Iowa Technology Governance Board Annual Report, January 10, 2011

This Technology Governance Board Annual Report provides information on the FY08 – FY12 Information Technology Personnel Spending; FY08 – FY12 Technology Equipment and Services Spending; and FY08 – FY12 Internal IT Expenditures with the Iowa Communications Network and Department of Administrative Services - Information Technology Enterprise. The report also contains a projection of technology cost savings. This report was produced in compliance with Iowa Code §8A.204(3a) and was submitted to the Governor, the Department of Management, and the General Assembly on January 10, 2011.

Efectos de las aceleraciones positivas en el organismo

El artículo describe los efectos de las aceleraciones positivas (+Gz) sobre el organismohumano. Se consideran los factores determinantes de las aceleraciones: intensidad, velocidad de comienzo, dirección y duración. La fisiopatología describe los factores hidrostáticos,hemodinámicos y de regulación refleja del aparato cardiocirculatorio. La exposición a +Gz produce reacciones adaptativas fisiológicas. Cuando éstas se superan, aparecen patologías de tipocardiocirculatorio, respiratorio, músculoesquelético, nervioso, sensorial,... Se describen los diferentes procedimientos y equipos específicos que protegen al piloto de los efectos de +Gz. Éstos incluyen las maniobras de contracción muscular, los trajes anti-G, los equipos de respiración a presión positiva, así como el entrenamiento en centrífuga.

Functional analysis of altered channel-activating protease-1 (CAP1) expression in the skin

Summary : The skin is a complex organ that protects the body against entry of pathogens and supplies a relatively dry and impermeable barrier to water loss. This barrier function is mainly provided by the epidermis, which is the outermost layer of the skin. Serine proteases are involved in skin physiology and it is known that mutations or alterations in their expression can lead to skin diseases. In order to investigate the importance of the regulated expression of CAPI/Prss8, a membrane bound serine protease expressed in the epidermis, we developed transgenic mice ectopically expressing CAPI/Prss8 in the skin. These animals exhibited a phenotype characterized by scaly skin, epidermal hypertrophy, inflammation and scratching behavior. This phenotype could be completely abolished in mice lacking the proteinase activated receptor 2 (PAR2) revealing PAR2 as a potential in vivo downstream target of CAP 1 /Prss8. We could also provide evidence of a CAP1 /Prss8 function independent of its catalytic activity. Additionally, mice ectopically expressing PAR2 in the skin developed a skin phenotype very similar to CAPI/Prss8 transgenic animals, supporting the hypothesis of PAR2 activation by CAPI/Prss8. We could furthermore demonstrate an inhibitory effect of the serine protease inhibitor nexin-I on CAPI/Prss8, since nexin-1 transgenic expression negated the skin phenotype observed in CAPI/Prss8 transgenic mice. CAP1/Prss8 and PAR2 transgenic animals, and the understanding of the interaction between CAPl/Prss8 and PAR2, can be helpful in developing potential CAPI/Prss8 and PAR2 inhibitory molecules that may be used as drugs to treat ichthyoses-like skin diseases. Résumé : La peau est un organe complexe qui protège le corps contre l'entrée des pathogènes et forme une barrière imperméable qui empêche la déshydratation. Cette fonction de barrière est surtout fournie par l'épiderme, la couche la plus superficielle de la peau. Le bon fonctionnement de cet organe est permis, entre autres, par les protéases à sérine qui sont des enzymes dont l'altération peut causer des maladies de la peau. Pour étudier l'importance de la régulation de CAP1/Prss8, une protéase à sérine exprimée au niveau de l'épiderme, des souris génétiquement modifiées, dans lesquelles CAP1/Prss8 est exprimé d'une manière ectopique dans la peau, ont été générées. Les animaux transgéniques pour CAP1/Prss8 présentent une peau squameuse, un épiderme hypertrophique, des processus inflammatoires et se grattent. Ce phénotype a pu être complètement guéri lorsque le gène de PAR2, un récepteur qui règle l'activité des cellules de l'épiderme, est inactivé chez la souris. Ceci montre que PAR2 est une cible de CAP1/Prss8 dans le système étudié. Des études expérimentales suggèrent de plus que l'effet de CAP1/Prss8 dans ce modèle ne dépend pas de son activité enzymatique. En dernière analyse, il a été démontré que l'expression transgénique de nexin-1, un inhibiteur des protéases à sérine exprimé dans la peau, a la capacité d'améliorer la peau squameuse et l'épiderme hypertrophique causés par CAP1/Prss8 transgénique. Les animaux transgéniques pour CAP1/Prss8 et PAR2, et la compréhension du mécanisme d'interaction entre eux, pourraient aider à développer et à tester des molécules inhibitrices de CAP1 /Prss8 et PARI qui pourraient alors être utilisées comme médicaments pour traiter des maladies de la peau comme les ichthyoses.

Faire la ville juste : une analyse "in itinere" de la maîtrise publique d'ouvrage du projet urbain Carré de Soie (métropole lyonnaise)

Dans certaines portions des agglomérations (poches de pauvreté de centre-ville, couronnes suburbaines dégradées, espaces périurbains sans aménité), un cumul entre des inégalités sociales (pauvreté, chômage, etc.) et environnementales (exposition au bruit, aux risques industriels, etc.) peut être observé. La persistance de ces inégalités croisées dans le temps indique une tendance de fond : la capacité d'accéder à un cadre de vie de qualité n'est pas équitablement partagée parmi les individus. Ce constat interroge : comment se créent ces inégalités ? Comment infléchir cette tendance et faire la ville plus juste ?¦Apporter des réponses à cette problématique nécessite d'identifier les facteurs de causalités qui entrent en jeu dans le système de (re)production des inégalités urbaines. Le fonctionnement des marchés foncier et immobilier, la « tyrannie des petites décisions » et les politiques publiques à incidence spatiale sont principalement impliqués. Ces dernières, agissant sur tous les éléments du système, sont placées au coeur de ce travail. On va ainsi s'intéresser précisément à la manière dont les collectivités publiques pilotent la production de la ville contemporaine, en portant l'attention sur la maîtrise publique d'ouvrage (MPO) des grands projets urbains.¦Poser la question de la justice dans la fabrique de la ville implique également de questionner les référentiels normatifs de l'action publique : à quelle conception de la justice celle-ci doit- elle obéir? Quatre perspectives (radicale, substantialiste, procédurale et intégrative) sont caractérisées, chacune se traduisant par des principes d'action différenciés. Une méthodologie hybride - empruntant à la sociologie des organisations et à l'analyse des politiques publiques - vient clore le volet théorique, proposant par un détour métaphorique d'appréhender le projet urbain comme une pièce de théâtre dont le déroulement dépend du jeu d'acteurs.¦Cette méthodologie est utilisée dans le volet empirique de la recherche, qui consiste en une analyse de la MPO d'un projet urbain en cours dans la première couronne de l'agglomération lyonnaise : le Carré de Soie. Trois grands objectifs sont poursuivis : descriptif (reconstruire le scénario), analytique (évaluer la nature de la pièce : conte de fée, tragédie ou match d'improvisation ?) et prescriptif (tirer la morale de l'histoire). La description de la MPO montre le déploiement successif de quatre stratégies de pilotage, dont les implications sur les temporalités, le contenu du projet (programmes, morphologies) et les financements publics vont être déterminantes. Sur la base de l'analyse, plusieurs recommandations peuvent être formulées - importance de l'anticipation et de l'articulation entre planification et stratégie foncière notamment - pour permettre à la sphère publique de dominer le jeu et d'assurer la production de justice par le projet urbain (réalisation puis entretien des équipements et espaces publics, financement de logements de qualité à destination d'un large éventail de populations, etc.). Plus généralement, un décalage problématique peut être souligné entre les territoires stratégiques pour le développement de l'agglomération et les capacités de portage limitées des communes concernées. Ce déficit plaide pour le renforcement des capacités d'investissement de la structure intercommunale.¦La seule logique du marché (foncier, immobilier) mène à la polarisation sociale et à la production d'inégalités urbaines. Faire la ville juste nécessite une forte volonté des collectivités publiques, laquelle doit se traduire aussi bien dans l'ambition affichée - une juste hiérarchisation des priorités dans le développement urbain - que dans son opérationnalisation - une juste maîtrise publique d'ouvrage des projets urbains.¦Inner-city neighborhoods, poor outskirts, and peri-urban spaces with no amenities usually suffer from social and environmental inequalities, such as poverty, unemployment, and exposure to noise and industrial hazards. The observed persistence of these inequalities over time points to an underlying trend - namely, that access to proper living conditions is fundamentally unequal, thus eliciting the question of how such inequalities are effected and how this trend can be reversed so as to build a more equitable city.¦Providing answers to such questions requires that the causal factors at play within the system of (re)production of urban inequalities be identified. Real estate markets, "micromotives and macrobehavior", and public policies that bear on space are mostly involved. The latter are central in that they act on all the elements of the system. This thesis therefore focuses on the way public authorities shape the production of contemporary cities, by studying the public project ownership of major urban projects.¦The study of justice within the urban fabric also implies that the normative frames of reference of public action be questioned: what conception of justice should public action refer to? This thesis examines four perspectives (radical, substantialist, procedural, and integrative) each of which results in different principles of action. This theoretical part is concluded by a hybrid methodology that draws from sociology of organizations and public policy analysis and that suggests that the urban project may be understood as a play, whose outcome hinges on the actors' acting.¦This methodology is applied to the empirical analysis of the public project ownership of an ongoing urban project in the Lyon first-ring suburbs: the Carré de Soie. Three main objectives are pursued: descriptive (reconstructing the scenario), analytical (assessing the nature of the play - fairy tale, tragedy or improvisation match), and prescriptive (drawing the moral of the story). The description of the public project ownership shows the successive deployment of four control strategies, whose implications on deadlines, project content (programs, morphologies), and public funding are significant. Building on the analysis, several recommendations can be made to allow the public sphere to control the process and ensure the urban project produces equity (most notably, anticipation and articulation of planning and real- estate strategy, as well as provision and maintenance of equipment and public spaces, funding of quality housing for a wide range of populations, etc.). More generally, a gap can be highlighted between those territories that are strategic to the development of the agglomeration and the limited resources of the municipalities involved. This deficit calls for strengthening the investment abilities of the intermunicipal structure.¦By itself, the real-estate market logic brings about social polarization and urban inequalities. Building an equitable city requires a strong will on the part of public authorities, a will that must be reflected both in the stated ambition - setting priorities of urban development equitably - and in its implementation managing urban public projects fairly.

MEPDG Work Plan Task No. 5: Characterization of Unbound Materials (Soils/Aggregates) for Mechanistic-Empirical Pavement Design Guide, 2009

The resilient modulus (MR) input parameters in the Mechanistic-Empirical Pavement Design Guide (MEPDG) program have a significant effect on the projected pavement performance. The MEPDG program uses three different levels of inputs depending on the desired level of accuracy. The primary objective of this research was to develop a laboratory testing program utilizing the Iowa DOT servo-hydraulic machine system for evaluating typical Iowa unbound materials and to establish a database of input values for MEPDG analysis. This was achieved by carrying out a detailed laboratory testing program designed in accordance with the AASHTO T307 resilient modulus test protocol using common Iowa unbound materials. The program included laboratory tests to characterize basic physical properties of the unbound materials, specimen preparation and repeated load triaxial tests to determine the resilient modulus. The MEPDG resilient modulus input parameter library for Iowa typical unbound pavement materials was established from the repeated load triaxial MR test results. This library includes the non-linear, stress-dependent resilient modulus model coefficients values for level 1 analysis, the unbound material properties values correlated to resilient modulus for level 2 analysis, and the typical resilient modulus values for level 3 analysis. The resilient modulus input parameters library can be utilized when designing low volume roads in the absence of any basic soil testing. Based on the results of this study, the use of level 2 analysis for MEPDG resilient modulus input is recommended since the repeated load triaxial test for level 1 analysis is complicated, time consuming, expensive, and requires sophisticated equipment and skilled operators.

Investigation of Two Bridge Alternatives for Low Volume Roads - Phase II Volume 1 of 2 Concept 1: Steel Beam Precast Units, TR-410, 2000

This project continues the research which addresses the numerous bridge problems on the Iowa secondary road system. It is a continuation (Phase 2) of Project HR-382, in which two replacement alternatives (Concept 1: Steel Beam Precast Units and Concept 2: Modification of the Benton County Beam-in-Slab Bridge) were investigated. In previous research for concept 1, a precast unit bridge was developed through laboratory testing. The steel-beam precast unit bridge requires the fabrication of precast double-tee (PCDT) units, each consisting of two steel beams connected by a reinforced concrete deck. The weight of each PCDT unit is minimized by limiting the deck thickness to 4 in., which permits the units to be constructed off-site and then transported to the bridge site. The number of units required is a function of the width of bridge desired. Once the PCDT units are connected, a cast-in-place reinforced concrete deck is cast over the PCDT units and the bridge railing attached. Since the steel beam PCDT unit bridge design is intended primarily for use on low-volume roads, used steel beams can be utilized for a significant cost savings. In previous research for concept 2, an alternate shear connector (ASC) was developed and subjected to static loading. In this investigation, the ASC was subjected to cyclic loading in both pushout specimens and composite beam tests. Based on these tests, the fatigue strength of the ASC was determined to be significantly greater than that required in typical low volume road single span bridges. Based upon the construction and service load testing, the steel-beam precast unit bridge was successfully shown to be a viable low volume road bridge alternative. The construction process utilized standard methods resulting in a simple system that can be completed with a limited staff. Results from the service load tests indicated adequate strength for all legal loads. An inspection of the bridge one year after its construction revealed no change in the bridge's performance. Each of the systems previously described are relatively easy to construct. Use of the ASC rather than the welded studs significantly simplified the work, equipment, and materials required to develop composite action between the steel beams and the concrete deck.