Sequential slotted amplify-and-forward with partial relay isolation

In this paper, we propose a novel relay ordering and scheduling strategy for the sequential slotted amplify-and-forward (SAF) protocol and evaluate its performance in terms of diversity-multiplexing trade-off (DMT). The relays between the source and destination are grouped into two relay clusters based on their respective locations. The proposed strategy achieves partial relay isolation and decreases the decoding complexity at the destination. We show that the DMT upper bound of sequential-SAF with the proposed strategy outperforms other amplify and forward protocols and is more practical compared to the relay isolation assumption made in the original paper [1]. Simulation result shows that the sequential-SAF protocol with the proposed strategy has better outage performance compared to the existing AF and non-cooperative protocols in high SNR regime.

Sequential slotted amplify-decode-and-forward

In this paper, we propose a novel slotted hybrid cooperative protocol named the sequential slotted amplify-decodeand-forward (SADF) protocol and evaluate its performance in terms of diversity-multiplexing trade-off (DMT). The relays between the source and destination are divided into two different groups and each relay either amplifies or decodes the received signal. We first compute the optimal DMT of the proposed protocol with the assumption of perfect decoding at the DF relays. We then derive the DMT closed-form expression of the proposed sequential-SADF and obtain the proximity gain bound for achieving the optimal DMT. With the proximity gain bound, we then found the distance ratio to achieve the optimal DMT performance. Simulation result shows that the proposed protocol with high proximity gain outperforms other cooperative communication protocols in high SNR regime.

Some reflection of research 'Schools' and geographies

Reflecting on real and perceived differences between European and North American research cultures, I challenge views that ‘European’ research is under appreciated or discriminated against, and caution against isolationist European positions. Instead, I argue that although no distinctive and coherent European tradition or culture really exists, there may be elements of the prevalent research culture that can be turned into an advantage for Europe-based and/or European-trained researchers in helping to influence and improve one, global research conversation. Of course, a range of sub-communities and sub-conversations will and should exist, but there is no reason for these to be based on geography.

An automated tool for assessing security-critical designs and programs

This paper describes in detail our Security-Critical Program Analyser (SCPA). SCPA is used to assess the security of a given program based on its design or source code with regard to data flow-based metrics. Furthermore, it allows software developers to generate a UML-like class diagram of their program and annotate its confidential classes, methods and attributes. SCPA is also capable of producing Java source code for the generated design of a given program. This source code can then be compiled and the resulting Java bytecode program can be used by the tool to assess the program's overall security based on our security metrics.

The naming of waterfalls

As features of the landscape, waterfalls have been studied extensively by geographers, but the names given to these landforms have received relatively little scholarly attention. This paper examines the naming of waterfalls and addresses the question of classifying these hydronyms. The subject is considered in a global historical context, focusing on place names in the anglophone world. Until the 18th and 19th centuries, relatively few waterfalls were named.With the beginning of the Industrial Revolution, water power rose in economic importance, and at the same time, there was a growing scientific and aesthetic engagement with the landscape. These developments are suggested as reasons for the increased interest in waterfalls which were then being recorded in topographical literature and on maps, individual names being given to increasing numbers of falls. European exploration added to the knowledge of the world’s waterfalls, many of which were given names by their ‘discoverers’. This naming process accelerated with the growth of domestic and overseas tourism which exploited scenic resources such as waterfalls. Until now, research on the names of waterfalls has been fragmentary, and the classification of these hydronyms has been neglected. This paper demonstrates that waterfall names can be classified in accordance with a recognised toponymic typology. Using examples drawn from waterfall guidebooks, databases, maps, and other sources, the following discussion supports George Stewart’s claim that his toponymic classification is valid for place names of all kinds.

Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling at elevated temperatures

Cold-formed steel beams are increasingly used as floor joists and bearers in buildings and often their behaviour and moment capacities are influenced by lateral-torsional buckling. With increasing usage of cold-formed steel beams their fire safety design has become an important issue. Fire design rules are commonly based on past research on hot-rolled steel beams. Hence a detailed parametric study was undertaken using validated finite element models to investigate the lateral-torsional buckling behaviour of simply supported cold-formed steel lipped channel beams subjected to uniform bending at uniform elevated temperatures. The moment capacity results were compared with the predictions from the available ambient temperature and fire design rules and suitable recommendations were made. European fire design rules were found to be over-conservative while the ambient temperature design rules could not be used based on single buckling curve. Hence a new design method was proposed that includes the important non-linear stress-strain characteristics observed for cold-formed steels at elevated temperatures. Comparison with numerical moment capacities demonstrated the accuracy of the new design method. This paper presents the details of the parametric study, comparisons with current design rules and the new design rules proposed in this research for lateral-torsional buckling of cold-formed steel lipped channel beams at elevated temperatures.

Preserving the past in digital memory

The process of researching children’s literature from the past is a growing challenge as resources age and are increasingly treated as rare items, stored away within libraries and other research centres. In Australia, researchers and librarians have collaborated with the bibliographic database AustLit: The Australian Literature Resource to produce the Australian Children’s Literature Digital Resources Project (CLDR). This Project aims to address the growing demand for online access to rare children’s literature resources, and demonstrates the research potential of early Australian children’s literature by supplementing the collection with relevant critical articles. The CLDR project is designed with a specific focus and provides access to full text Australian children’s literature from European settlement to 1945. The collection demonstrates a need and desire to preserve literature treasures to prevent losing such collections in a digital age. The collection covers many themes relevant to the conference including, trauma, survival, memory, survival, hauntings, and histories. The resource provides new and exciting ways with which to research children’s literature from the past and offers a fascinating repository to scholars and professionals of ranging disciplines who are in interested in Australian children’s literature.

Predicting the effects of bagasse depithing operations on boiler combustion performance

The sugar industry is pursuing diversification options using bagasse as a feedstock. Depithing, the removal of the smaller bagasse particles, is an integral part of the manufacturing processes for bagasse by-products such as pulp and paper. There are possible environmental and economic benefits associated with incorporating depithing operations into a sugar factory. However there have only been limited investigations into the effects of depithing operations on a sugar factory boiler station. This paper describes a modelling investigation, using the lumped parameter boiler design tool BOILER and the CFD code FURNACE, to predict the effects of pith, depithed bagasse and mixed bagasse/pith firing on the efficiency, fuel consumption and combustion performance of a typical sugar factory boiler.

Anomalous event detection using a semi-two dimensional hidden Markov model

The rapid increase in the deployment of CCTV systems has led to a greater demand for algorithms that are able to process incoming video feeds. These algorithms are designed to extract information of interest for human operators. During the past several years, there has been a large effort to detect abnormal activities through computer vision techniques. Typically, the problem is formulated as a novelty detection task where the system is trained on normal data and is required to detect events which do not fit the learned `normal' model. Many researchers have tried various sets of features to train different learning models to detect abnormal behaviour in video footage. In this work we propose using a Semi-2D Hidden Markov Model (HMM) to model the normal activities of people. The outliers of the model with insufficient likelihood are identified as abnormal activities. Our Semi-2D HMM is designed to model both the temporal and spatial causalities of the crowd behaviour by assuming the current state of the Hidden Markov Model depends not only on the previous state in the temporal direction, but also on the previous states of the adjacent spatial locations. Two different HMMs are trained to model both the vertical and horizontal spatial causal information. Location features, flow features and optical flow textures are used as the features for the model. The proposed approach is evaluated using the publicly available UCSD datasets and we demonstrate improved performance compared to other state of the art methods.

What if you're really different? Case studies of children with high functioning autism participating in the Get REAL programme who had atypical learning trajectories.

Evaluation of the Get REAL programme in an inclusive primary school setting has indicated its effectiveness in promoting pro-social behaviour for children with high functioning Autism. However, two children with co-morbid diagnoses and complex personal circumstances showed less consistent improvements. In order to explain their unique trajectories, not readily derived from quantitative studies, an exploratory case study approach was used to examine contextual influences on patterns of progress. Multiple data sources included coded video footage from the Get REAL programme, school reports on conduct, and parents and classroom teacher reports using the Strengths and Difficulties Questionnaire. While results provide support for the efficacy of the Get REAL programme for the two children, they also highlight the value of co-ordinated strategies and collaborative individualised approaches in more complex cases. This paper outlines the Get REAL intervention and a range of other school and support agency strategies impacting progress.

Spatio temporal feature evaluation for action recognition

Spatio-Temporal interest points are the most popular feature representation in the field of action recognition. A variety of methods have been proposed to detect and describe local patches in video with several techniques reporting state of the art performance for action recognition. However, the reported results are obtained under different experimental settings with different datasets, making it difficult to compare the various approaches. As a result of this, we seek to comprehensively evaluate state of the art spatio- temporal features under a common evaluation framework with popular benchmark datasets (KTH, Weizmann) and more challenging datasets such as Hollywood2. The purpose of this work is to provide guidance for researchers, when selecting features for different applications with different environmental conditions. In this work we evaluate four popular descriptors (HOG, HOF, HOG/HOF, HOG3D) using a popular bag of visual features representation, and Support Vector Machines (SVM)for classification. Moreover, we provide an in-depth analysis of local feature descriptors and optimize the codebook sizes for different datasets with different descriptors. In this paper, we demonstrate that motion based features offer better performance than those that rely solely on spatial information, while features that combine both types of data are more consistent across a variety of conditions, but typically require a larger codebook for optimal performance.

Why renal nurses cope so well with their workplace stressors

Background: Previous studies have found significant stressors experienced by nurses working in haemodialysis units yet renal nurses appear to report less burnout than other nurses. Objectives: This study aims to undertake an inductive process to better understand the stressors and the coping strategies used by renal nurses that may lead to resilience. Method: Sixteen haemodialysis nurses from a metropolitan Australian hospital and two satellite units participated in open-ended interviews. Data were analysed from a grounded theory methodology. Measures of burnout and resilience were also obtained. Results: Two major categories of stressors emerged. First, due to prolonged patient contact, family-like relationships developed that lead to the blurring of boundaries. Second, participants experienced discrimination from both patients and staff. Despite these stressors, the majority of participants reported low burnout and moderately high-to-high levels of resilience. The major coping strategy that appeared to promote resilience was emotional distancing, while emotional detachment appeared to promote burn-out. Conclusion: Assisting nurses to use emotional distancing, rather than emotional detachment strategies to engender a sense of personal achievement may promote resilience.

Submission on Financial Planning Association Consultation Paper

This report was submitted to the Financial Planning Association and is confined to the proposals in relation to compliance with the Best Interests duty (Part B) and the provision of Scaled Advice (Part C) in the FPA Consultation Paper, Modifications to the FPA Code of Professional Practice to incorporate FoFA, released in October 2012.

The role of knowledge intermediaries in developing firm learning capabilities

Regional innovation systems (RISs) literature has emphasized the critical role of interactive learning and knowledge exchange amongst firms and a variety of spatially connected innovation institutions as the foundation of regional innovation. Knowledge intermediaries have been analysed in terms of the technology-transaction services they provide firms and/or knowledge producers such as universities and therefore the role they play in facilitating interaction within the RIS. However, innovation also depends on the capability of the firm to learn. Some studies have suggested that intermediaries also play a role in that regard as participation in intermediary knowledge transfer programmes can contribute to the development of firm capabilities for problem-solving and learning. Our research is based on two case study intermediary programmes involving interviews with facilitators and participants. Our data show that knowledge intermediaries affect organizational learning capabilities by impacting on firms' network relationships, internal and external communication channels and internal learning processes which in turn affect the ability to interpret and use knowledge within the firm. This suggests that the role of knowledge intermediaries might be greater than facilitating interactions in the innovation system, as knowledge intermediation may affect the ability of firms to learn and absorb knowledge from their environment.

Evaluating the QUT Homestay Program : lessons learnt in providing quality services to international students

The QUT Homestay Program is an essential part of the university’s commitment to meet the accommodation needs of international students. Despite the importance of this style of accommodation, there is very little research addressing issues related to homestay arrangements. The program at Queensland University of Technology (QUT) was evaluated in 2002 to develop a continuous improvement framework to ensure provision of quality homestay services to international students. This paper presents an overview of the evaluation and key lessons learnt in providing quality homestay services to international students. It will cover social and cross-cultural issues faced by providers and international students in the homestay environment, the homestay support needs, program information, policies, procedures and code of practice governing the program.