Raman amplification and performance altering effects

This thesis presents an experimental investigation into several applications of the Raman scattering effect in communication optical fibres as well as how some of these applications can be modified to enhance the resulting performance. The majority of the work contained within is based on laboratory results using many commercially available components. The results can be divided into and presented in three main parts: Firstly, a novel application of a known effect is used to broaden Raman pump light in order to achieve a more continuous distribution of gain with respect to wavelength. Multiple experimental results are presented, all based around the prior spreading of the pump spectrum before being used in the desired transmission fibre. Gathered results show that a notable improvement can be obtained from applying such a technique along with the scope for further optimisation work. Secondly, an investigation into the interaction between the well known effect of Four Wave Mixing (FWM) and Raman scattering is provided. The work provides an introduction to the effect as well commenting on previous literature regarding the effect and its mitigation. In response to existing research experimental results are provided detailing some limitations of proposed schemes along with concepts of how further alleviation from the deleterious effects maybe obtained. Lastly, the distributed nature of the Raman gain process is explored. A novel technique on how a near constant distribution of gain can be employed is implemented practically. The application of distributed gain is then applied to the generation of optical pulses with special mathematical properties within a laboratory setting and finally the effect of pump noise upon distributed gain techniques is acknowledged.

Feature Extraction for Classification in the Data Mining Process

Dimensionality reduction is a very important step in the data mining process. In this paper, we consider feature extraction for classification tasks as a technique to overcome problems occurring because of “the curse of dimensionality”. Three different eigenvector-based feature extraction approaches are discussed and three different kinds of applications with respect to classification tasks are considered. The summary of obtained results concerning the accuracy of classification schemes is presented with the conclusion about the search for the most appropriate feature extraction method. The problem how to discover knowledge needed to integrate the feature extraction and classification processes is stated. A decision support system to aid in the integration of the feature extraction and classification processes is proposed. The goals and requirements set for the decision support system and its basic structure are defined. The means of knowledge acquisition needed to build up the proposed system are considered.

Decision-making in product quality based on failure knowledge

Decision-making in product quality is an indispensable stage in product development, in order to reduce product development risk. Based on the identification of the deficiencies of quality function deployment (QFD) and failure modes and effects analysis (FMEA), a novel decision-making method is presented that draws upon a knowledge network of failure scenarios. An ontological expression of failure scenarios is presented together with a framework of failure knowledge network (FKN). According to the roles of quality characteristics (QCs) in failure processing, QCs are set into three categories namely perceptible QCs, restrictive QCs, and controllable QCs, which present the monitor targets, control targets and improvement targets respectively for quality management. A mathematical model and algorithms based on the analytic network process (ANP) is introduced for calculating the priority of QCs with respect to different development scenarios. A case study is provided according to the proposed decision-making procedure based on FKN. This methodology is applied in the propeller design process to solve the problem of prioritising QCs. This paper provides a practical approach for decision-making in product quality. Copyright © 2011 Inderscience Enterprises Ltd.

Dynamic decision-making based on NFR for managing software variability and configuration selection

Due to dynamic variability, identifying the specific conditions under which non-functional requirements (NFRs) are satisfied may be only possible at runtime. Therefore, it is necessary to consider the dynamic treatment of relevant information during the requirements specifications. The associated data can be gathered by monitoring the execution of the application and its underlying environment to support reasoning about how the current application configuration is fulfilling the established requirements. This paper presents a dynamic decision-making infrastructure to support both NFRs representation and monitoring, and to reason about the degree of satisfaction of NFRs during runtime. The infrastructure is composed of: (i) an extended feature model aligned with a domain-specific language for representing NFRs to be monitored at runtime; (ii) a monitoring infrastructure to continuously assess NFRs at runtime; and (iii) a exible decision-making process to select the best available configuration based on the satisfaction degree of the NRFs. The evaluation of the approach has shown that it is able to choose application configurations that well fit user NFRs based on runtime information. The evaluation also revealed that the proposed infrastructure provided consistent indicators regarding the best application configurations that fit user NFRs. Finally, a benefit of our approach is that it allows us to quantify the level of satisfaction with respect to NFRs specification.

A sensory-guided surgical micro-drill

This article describes a surgical robotic device that is able to discriminate tissue interfaces and other controlling parameters ahead of the drill tip. The advantage in such a surgery is that the tissues at the interfaces can be preserved. A smart tool detects ahead of the tool point and is able to control the interaction with respect to the flexing tissue, to avoid penetration or to control the extent of protrusion with respect to the position of the tissue. For surgical procedures, where precision is required, the tool offers significant benefit. To interpret the drilling conditions and the conditions leading up to breakthrough at a tissue interface, a sensing scheme is used that discriminates between the variety of conditions posed in the drilling environment. The result is a fully autonomous system, which is able to respond to the tissue type, behaviour, and deflection in real-time. The system is also robust in terms of disturbances encountered in the operating theatre. The device is pragmatic. It is intuitive to use, efficient to set up, and uses standard drill bits. The micro-drill, which has been used to prepare cochleostomies in the theatre, was used to remove the bone tissue leaving the endosteal membrane intact. This has enabled the preservation of sterility and the drilling debris to be removed prior to the insertion of the electrode. It is expected that this technique will promote the preservation of hearing and reduce the possibility of complications. The article describes the device (including simulated drill progress and hardware set-up) and the stages leading up to its use in the theatre. © 2010 Authors.

Diferenciais de mortalidade adulta por nível de escolaridade no Brasil e regiões

The study of mortality by various differentials has been an important tool to guide public health policies, due to better describing the events of deaths in a population. This research aims to seek disparities in mortality according to educational level, sex and adulthood in large Brazilian regions and consequently for Brazil as a whole. A vast literature has shown that people with more education tend to have lower risk of death. Studies on inequalities in mortality by level of education in Brazil are still very specific and has still known very little about Brazil about mortality according to educational level, due to lack of information about the well-filled school in the records of deaths arising from the Mortality Information System (MIS) of the Ministry of Health. This data source has shown improvement in the coverage of sub reports in the last decade, however, it has still perceived negligence in completing the question regarding schooling of death (about 30% of registered deaths in 2010 to Brazil, Given this scenario, this work contributes to the national literature on the behavior of adult mortality differentials having as proposed, using data from the new variable mortality of the 2010 Census (CD 2010), assuming the characteristics of education of the head the household for deaths occurring in the same. It is therefore considered that the probability of mortality is homogeneous within the household. Events of deaths were corrected only for the records come from households where the head possessed levels of schooling and Instruction Elementary Education No Incomplete and Primary Education and Secondary Education Complete Incomplete through the Generations Extinct Adjusted method. With deaths already corrected, probabilities of death were calculated between 15 and 60 years life, as well as tables by sex and level of education to all regions of Brazil. No que se refere às probabilidades de morte por idade, nas idades entre 15 e 60 anos as maiores probabilidades seguem um gradiente, maior probabilidade para os menos escolarizados. Results corroborate the literature, the more educated the population is, the greater the life expectancy. In all Brazilian regions, life expectancy of the female population is greater than that of men at all levels of schooling. With respect to probabilities of death by age between the ages of 15 and 60 years the most likely follow a gradient, most likely to the least educated. At older ages (from 70 years), this behavior has presented another pattern, the lowest level of education has the lowest odds in the regions, North, Northeast, South and Midwest, except in the Southeast region

“Eu quero ver se a justiça vai funcionar mesmo”: a resolubilidade dos casos de abuso sexual contra crianças e adolescentes no município de Natal/RN

This study presents the issue of Children and Youth sexual violence from a critical eye in assessing the actions of the organs of defense and protection in cases of sexual abuse against children and adolescents in the city of Natal / RN. We aimed to perform this evaluation from the investigation of 05 cases of child and adolescent victims of sexual abuse that were answered by Precinct Specializing in Defense of Children and Adolescents (DCA), considering the service flow of cases, the articulation between the organs that make up System Warranty rights (SGD), the record of the complaint, as well as the elapsed time between the record of the complaint and the accountability of the offender. Thus, the present study consists in an analysis from the quantitative and qualitative theoretical-methodological approach assuming 'sexual violence in their social, historical, cultural, legal and economic dimensions. The route established between the knowledge about the object and the method of analysis involved: literature about the conceptual discussion on sexual violence, analyzing quantitative data provided by DCA, as well as semi-structured interviews with victims and those responsible for the professionals working in institutions of the defense agencies. Is apprehended in this study that the situations of violence against children is a multifaceted phenomenon that has expressions from ancient societies, assuming a peculiarity in contemporary society to consider the juvenile population as subjects of rights. Furthermore, it was possible to identify the lack of effectiveness, with respect to the actions of the organs of defense in intervention situations of sexual abuse now investigated as yet not actually configure a process of articulation between these bodies from the perspective of ensuring rights and break the cycle of violence.

Resumo de dissertações e teses: a estrutura composicional à luz da Análise Textual dos Discursos

This doctoral dissertationproposes the description, interpretation and analysis of the compositional structure of thesis and dissertation abstracts, with regard to the linguistic mechanisms that evidence text zones of different typological sequences, such as those of the text plan. Along these lines, the research problem was developed from the notion of compositional structure (sequences and text plans), as one of the levels or plans of text analysis, according to the theoretical framework proposed by Jean-Michel Adam (2011a). The main objective of this study was to recognize how the compositional structure, of thesis and dissertation abstracts, is achieved, with respect to text units and the global organization of this text category. The hypothesis posed in this research posits that specific informational text composition categories of abstracts are necessary to process the representation of the original text and the way in which it makes its meaning. Subsequently, this study is based on the theoretical and methodological framework of Text Linguistics (TL) and, above all, Textual Discourse Analysis (TDA), as we endeavor to understand the organizational structure of abstracts from both a linguistic and textual perspective. This structure involves the text plan of abstracts, with respect to their communicative purpose, i.e, the sharing of scientific information in its standard textual form. Thus, the development of this study, from a theoretical and methodological perspective, is based on the theoretical and descriptive premises from TDA (ADAM, 2011a, 2012; PASSEGGI et al., 2010), and also from TL (BEAUGRANDE; DRESSLER, (2012 [1981]); COSERIU; LAMAS (2010); MARCUSCHI, 2009 [1983]; FÁVERO; KOCH, 1994;KOCH, 2006; BENTES, 2004; BENTES; LEITE, 2010), within the field of text studies. The methodology of this study relies on empirical, documental research, which is qualitative, and adopts a descriptive and interpretive approach. From the empirical perspective, our objective is to understand the problems pertaining to the textual composition of abstracts, aiming to elucidate them in light of the theoretical and methodological framework previously mentioned. The corpus of the analysis is comprised of seven abstracts designated for systematic data collection. These texts, written between 2004 and 2011,were selected from Master’s theses and Doctoral dissertations in their electronic version, from the graduate program at the Federal University of Rio Grande do Norte. A thorough review of the literature reveals a clear fluctuation in the terminology of the concept, ‘abstract’. The results of the analysis revealed that the abstracts, which comprise the corpus of analysis in this study, in general, present typological heterogeneity, while the text plan remains fixed. Finally, the new knowledge gained in this research contributes both to the understanding of the compositional structure of abstracts as well as their production.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.

Radionuclides measured on 27 water bottle profiles during POLARSTERN cruise ANT-XXIV/3

As part of the GEOTRACES Polarstern expedition ANT XXIV/3 (ZERO and DRAKE) we have measured the vertical distribution of 234Th on sections through the Antarctic Circumpolar Current along the zero meridian and in Drake Passage and on an EW section through the Weddell Sea. Steady state export fluxes of 234Th from the upper 100m, derived from the depletion of 234Th with respect to its parent 238U, ranged from 621±105 dpm/m**2/d to 1773±90 dpm/m**2/d. This 234Th flux was converted into an export flux of organic carbon ranging from 3.1-13.2 mmolC/m**2/d (2.1-9.0 mmolC/m**2/d) using POC/234Th ratio of bulk (respectively >50 µm) suspended particles at the export depth (100 m). Non-steady state fluxes assuming zero flux under ice cover were up to 23% higher. In addition, particulate and dissolved 234Th were measured underway in high resolution in the surface water with a semi-automated procedure. Particulate 234Th in surface waters is inversely correlated with light transmission and pCO2 and positively with fluorescence and optical backscatter and is interpreted as a proxy for algal biomass. High resolution underway mapping of particulate and dissolved 234Th in surface water shows clearly where trace elements are absorbed by plankton and where they are exported to depth. Quantitative determination of the export flux requires the full 234Th profile since surface depletion and export flux become decoupled through changes in wind mixed layer depth and in contribution to export from subsurface layers. In a zone of very low algal abundance (54-58 °S at the zero meridian), confirmed by satellite Chl-a data, the lowest carbon export of the ACC was observed, allowing Fe and Mn to maintain their highest surface concentrations (Klunder et al., this issue, Middag et al., this issue). An ice-edge bloom that had developed in Dec/Jan in the zone 60-65 °S as studied during the previous leg (Strass et al., in prep) had caused a high export flux at 64.5 °S when we visited the area two months later (Feb/March). The ice-edge bloom had then shifted south to 65-69 °S evident from uptake of CO2 and dissolved Fe, Mn and 234Th, without causing export yet. In this way, the parallel analysis of 234Th can help to explain the scavenging behaviour of other trace elements.

A smart surgical robotic for cochlear implantation

In this paper a surgical robotic device for cochlear implantation surgery is described that is able to discriminate tissue interfaces and other controlling parameters ahead of a drill tip. The advantage in surgery is that tissues at interfaces can be preserved. The smart tool is able to control interaction with respect to the flexing tissue to avoid penetration control the extent of protrusion with respect to the real-time position of the tissue. To interpret drilling conditions, and conditions leading up to breakthrough at a tissue interface, the sensing scheme used enables discrimination between the variety of conditions posed in the drilling environment. The result is a robust fully autonomous system able to respond to tissue type, behaviour and deflection in real-time. The paper describes the robotic tool that has been designed to be used in the surgical environment where it has been used in the operating room.

Aerodynamic optimization using Adjoint methods and parametric CAD models

This paper describes an implementation of a method capable of integrating parametric, feature based, CAD models based on commercial software (CATIA) with the SU2 software framework. To exploit the adjoint based methods for aerodynamic optimisation within the SU2, a formulation to obtain geometric sensitivities directly from the commercial CAD parameterisation is introduced, enabling the calculation of gradients with respect to CAD based design variables. To assess the accuracy and efficiency of the alternative approach, two aerodynamic optimisation problems are investigated: an inviscid, 3D, problem with multiple constraints, and a 2D high-lift aerofoil, viscous problem without any constraints. Initial results show the new parameterisation obtaining reliable optimums, with similar levels of performance of the software native parameterisations. In the final paper, details of computing CAD sensitivities will be provided, including accuracy as well as linking geometric sensitivities to aerodynamic objective functions and constraints; the impact in the robustness of the overall method will be assessed and alternative parameterisations will be included.

Moving together – conditions for intercultural development at a highly diverse Swedish school

This thesis is a case study of a primary school in a highly diverse urban neighbourhood in Sweden. Basic pre-conditions for intercultural school development are studied by examining the overall organisation of teaching, learning and opportunities for collaboration in the investigated case. The study focuses on the targeted support measures to enhance learning for students with an immigrant background: Mother tongue instruction, Swedish as a Second Language, and tutoring in the mother tongue, as well as looking at pedagogical support provided by the school library. The latter has a mission to promote learning and inclusion, where non-native speakers of Swedish are a prioritised group. Communities of practice linked to the work organisation at a meso-level are investigated, and the collaborative relationships between professional groups at the school involved in the various support measures. Teacher relationships and categorisations implied by support measures impact the learning spaces that are shaped for students and the teaching spaces within which teachers work. Collaborative opportunities and convergence of concerns in the teaching spaces combine to shape the overall space for intercultural development. The raw data for the case study consists of interviews, national policy documents and additional information on local work organisation gained through documents and observations. Four articles resulted from the case study, each focusing a specific support measure. An overarching analysis is then made of findings from these articles and the other dimensions of the investigation. The analysis describes the organisation in terms of monocultural or intercultural school cultures, pointing to significant characteristics of the landscapes of practice, with respect to their overall implications for the spaces of school development. In the discussion, findings are considered in relation to research on professional development in education, collaboration, democracy and inclusive schooling. The relative positioning of languages and cultures is given particular attention, to ascertain if the school culture is monocultural or intercultural in the sense given by Lahdenperä (2008), and to what extent it could enable intercultural development. Such positioning plays a role interms of affordances for identity, participation and engagement discussed by Wenger (1998). This case study should be understood against the wider background of recent social developments in Europe linked to globalisation and technological changes. It is argued that looking at the concrete specifics which facilitate or obstruct school development, and simultaneously reflecting on how the different forms of teaching interrelate in the overall organisation and in policy may provide a useful vantage point from which structural changes can be contemplated.The discussion underlines the importance of the physical localisation of activities, continuity in personal contacts and time available for joint pedagogical reflection, as basic conditions for effective intercultural dialogue in the organisation. Finally, the impact of policy is considered, looking at connections between levels of policy, expressed in official steering documents, and conditions for teaching and learning at the level of an individual school.

Remoción de la hemoglobina por adsorción sobre nanopartículas magnéticas de Fe3O4/TiO2

La remoción de la hemoglobina (Hb) por adsorción de la proteína sobre nanopartículas (Nps) magnéticas de Fe3O4/TiO2 (núcleo/coraza) aplicando un campo magnético externo, fue investigada mediante espectroscopia ultravioleta en el rango del ultravioleta y visible (UV-VIS). Durante la etapa de contacto de las Nps con la Hb se varió la concentración de las Nps y la temperatura, complementariamente durante la etapa de remoción del complejo Fe3O4/TiO2-Hb se varió la intensidad del campo magnético externo. Con una concentración inicial de Nps de 8 mg ml-1, el valor de la absorbancia del sobrenadante disminuye en un 11% con respecto a la solución inicial de Hb (0,8 g l-1) y al aumentar en un 50% la concentración de Nps, el valor disminuye hasta un 17%. Al incrementar la temperatura de 25 a 35ºC disminuye la adsorción de la Hb pero no se observa indicios de desnaturalización de la misma. Durante la etapa de remoción del complejo Fe3O4/TiO2-Hb, al incrementar la fuerza magnética se logra una caída en la intensidad de la absorbancia, casi un 30%. Finalmente, se determinó la demanda bioquímica de oxígeno (DBO5) de la solución inicial de Hb y del sobrenandante, el valor para la solución inicial de Hb fue de 100 mg ml-1 y los resultados obtenidos para todas las soluciones tratadas fueron inferiores (62 mg ml-1) verificando el impacto que tuvo el uso de las Nps magnéticas de Fe3O4/TiO2 en la remoción de la Hb.