Human identification and analysis of DNA in bones

The introduction of molecular biology techniques, especially of DNA analysis, for human identification is a recent advance in legal medicine. Substantial effort has continuously been made in an attempt to identify cadavers and human remains after wars, socio-political problems and mass disasters. In addition, because of the social dynamics of large cities, there are always cases of missing people, as well as unidentified cadavers and human remains that are found. In the last few years, there has also been an increase in requests for exhumation of human remains in order to determine genetic relationships in civil suits and court action. The authors provide an extensive review of the literature regarding the use of this new methodology for human identification of ancient or recent bones.

Dry matter allocation in Jessenia bataua (PALMAE)

There are few assessments of lifetime dry matter production for tropical trees. However, several studies, have been carried out for palms. This study measures dry matter production for Jessenia bataua,a useful palm common in many areas of the Amazon Valley. Palms In the Ducke Forest Reserve Of INPA were studied. Approximately 34% of total aboveground dry matter production in this palm was, alllocated to reproductive effort, eg., the production of in florescences and fruits. The meaning of this percentage, to discussed, relative to percentages identified in other Neotropical palms.

"A reserva ecológica nacional e a sua importância para o ordenamento do território"

This work primarily aims to investigate the ambiguity between the right to build and the need to preserve nature through one of its instruments: the National Ecological Reserve. In both national and international political effort, forced by increasing ecological awareness of the society were being created regulations for environmental problemsolving frameworks. This significant increase in provisions, that regulated the environment and spatial territory, are directly related to the objectives of the European community. In a year when the soil policy has changed, it is important to review the priorities of regional planning in the face of environmental policies. REN is a restriction of public utility that, among other things, aims to define and integrate diverse areas of our territory which by their structure are essential to the ecological stability of the environment. Going through a historical study of the various regimes that regulated REN, the present work aims to inform the understanding of the concept REN, exposing its objectives and form of delimitation of integrated areas, in order to answer questions about the nature of this institute. It were related to all regulations governing the ecological reserves and land, namely Scheme for Conservation of Nature and Biodiversity; Natura 2000, the National Agricultural Reserve, the Law of the ownership of water resources and water, and the RJIGT RJUE, checking to its compatibility with REN. Through a literature review regarding the jurisprudence of national courts applying the doctrine, analysis of legal regimes, analysis of maps depicting the REN, we carried out a qualitative assessment of the trend and legal effect of REN in protecting populations and environment. Therefore we will work with this reflect on the existing environment awareness in our society and its problems in the management of natural resources.

Mark Rothko : Da origem mítica à refundação artística do mundo

Fenómeno assinalável no nosso século foi a emergência da chamada “arte global” (Belting), dando conta da crise do “mundo da arte” e a disseminação generalizada das práticas artísticas. Neste contexto a obra de Rothko ganha uma força inesperada. Sendo usualmente inscrito no “modernismo” com os seu valores de pureza e especificidade do meio, neste caso a pintura, a nossa investigação revela que o gesto Rothkoniano excede largamente esta representação, que levaria a distinguir radicalmente entre uma fase mítica e surrealista, uma fase abstracionista dos “colour field” e finalmente uma fase sublime das pinturas da Capela Ecuménica de Rothko. Existe uma continuidade evidente que remete para uma geoestética, onde a terra e a sua habitabilidade desempenham um papel crucial. Daí a necessidade de inscrever a obra de Rothko na geofilosofia contemporânea, tal com foi delineada por Gilles Deleuze e Félix Guattari. Procedeu-se, assim, a uma análise crítica da obra e da estética de Rothko, que profeticamente, mas inconscientemente, parece abrir o caminho para o pensamento de uma arte da terra. Trata-se de uma linha de continuidade que atravessa toda a obra de Rothko, refletindo uma picturação do mundo e a vontade de criar de um mundo pictórico e poético, reduzido a elementos mínimos, pós-figurativos mas onde se reconhece a incidência dos motivos como frame e abertura, linha de horizonte e pórticos e passagens. Num segundo momento, explora-se essa dimensão “inconsciente” num projeto artístico pessoal, que se desdobra em abordagens picturais, de pintura, de instalação e de vídeo, que denominamos por “A Terra como Acontecimento”. Este projeto prolonga o esforço Rothkoniano, ao mesmo tempo que o altera profundamente, nomeadamente pelo uso dos materiais, pela mutação no uso da cor, bem como pela maneira como os elementos figurativos são radicalmente alterados pela mera transposição da perspetiva usada. Se a ressonância rothkoniana está bem presente, não menos presente está a intenção de um confronto dialogante com a Obra de Mark Rothko. Aquilo que neste importante artista, era o inconsciente, marcado pelo mito e teologia, pela delimitação da linha de horizonte, bem clássica, e, acima de tudo, pela sua verticalidade marcadamente teológica, “A Terra como Acontecimento” é a matéria que é profundamente radicalizada, bem como a lógica concetual, a qual é preferentemente circular, sem orientação absoluta, e incompleta, o que implica uma outra visão da “abertura”/”fecho”, tão essencial na obra de Rothko. Desta investigação espera-se um contributo significativo para os debates atuais sobre a arte na contemporaneidade.

Fatores de risco no patrolhamento da GNR em ambiente operacional

In the mid-twentieth century, Portugal took the first big step towards social awareness of the Safety and Health at Work. Still later, the International Labour Organization and the World Health Organization were responsible for setting global guidelines that clarified the States for the way forward in inguito of safeguarding the common interests of workers, businesses and the state. All workers should be covered by the rules governing matters relating to Safety, imperative requirements established in the Constitution of the Portuguese Republic. These also include those soldiers from National Guard who, in contemporary social conjecture face in their everyday life situations worthy of heightened risk aquidade. Ensure the identification of risk factors to which they are exposed, is, first, a big boost in the way of preserving the safety of these employees, who daily selflessly and under the most adverse working conditions fulfill the mission of the Guarda Nacional Republicana. Adverse weather conditions, and violence at work are two examples of risk factors to which the military Guard are daily exposed, and hence arise many days of absence from the workplace. The purpose of this study is to identify the main risk factors to which the military from GNR are exposed during dismounted patrols, and also provide solutions on ways to mitigate and manage the risks presented. The cognitive distance traveled, throughout this study led us to demonstrate that it has been done by the GNR chain of Command, a huge effort to ensure through various forms (including emphasize the new Regulation of Uniforms), the resolution of the main factors that may jeopardize the integrity of the patrolmen, betting this Institution in the protection of the military that compose it, and the prevention of accidents at work through training and systematic monitoring that superiors expend with its employees.

On project finance and the first road concession in Portugal

In broad sense, Project Financing1 as a mean of financing large scale infrastructural projects worldwide has had a steady growth in popularity for the last 20 years. This growth has been relatively unscathed from most economic cycles. However in the wake of the 2007 systemic Financial Crisis, Project Financing was also in trouble. The liquidity freeze and credit crunch that ensued affected all parties involved. Traditional Lenders, of this type of financial instrument, locked-in long-term contractual obligations, were severely hit with scarcity of funding compounded by rapidly increasing cost of funding. All the while, Banks were “rescued” by the concerted actions of Central Banks and other Multi-Lateral Agencies around the world but at the same time “stressed” by upcoming regulatory effort (Basel Committee). This impact resulted in specific changes to this type of long-term financing. Changes such as Commercial Banks’ increased risk aversion; pricing increase and maturities decrease of credit facilities; enforcement of Market Disruption Event clauses; partial responsibility for project risk by Multilateral Agencies; and adoption of utility-like availability payments in other industrial sectors such as transportation and even social infrastructure. To the extent possible, this report is then divided in three parts. First, it begins with a more instructional part, touching academic literature (theory) and giving the Banks perspective (practice), but mostly as an overview of Project Finance for awareness’ sake. The renowned Harvard Business School professor – Benjamin Esty, states2 that Project Finance is a “relatively unexplored territory for both empirical and theoretical research” which means that academic research efforts are lagging the practice of Project Finance. Second, the report presents a practical case regarding the first Road Concession in Portugal in 1998 ending with the lessons learned 10 years after Financial Close. Lastly, the report concludes with the analysis of the current trends and changes to the industry post Financial Crisis of the late 2000’s. To achieve this I’ll reference relevant papers, books on the subject, online articles and my own experience in the Project Finance Department at a major Portuguese Investment Bank. Regarding the latter, with the signing of a confidentiality agreement, I’m duly omitting sensitive and proprietary bank information.

Otimização do estudo inicial do oboé: a procura da motivação

Relatório de estágio de mestrado em Ensino de Música

Comparing standard and low-cost tools for gradient evaluation along potential cycling paths

Promoting the use of non-motorized modes of transport, such as cycling, is an important contribution to the improvement of mobility, accessibility and equity in cities. Cycling offers a fast and cheap transportation option for short distances, helping to lower pollutant emissions and contributing to a healthier way of life. In order to make the cycling mode more competitive in relation to motorized traffic, it is necessary to evaluate the potential of alternatives from the perspective of the physical effort. One way to do so consists of assessing the suitability of locations for implementing cycling infrastructures. In this work, four tools to determine the gradient along potential cycling paths are compared. Furthermore, an evaluation of the reliability of some low-cost tools to measure this parameter was conducted, by comparison with standard measurements using cartographic plans, on a field case study applied to the city of Braga, Portugal. These tools revealed a good level of accuracy for the planning stage, but proved to be less reliable for use in design.

Modern optimization in earthwork construction

Earthworks tasks are often regarded in transportation projects as some of the most demanding processes. In fact, sequential tasks such as excavation, transportation, spreading and compaction are strongly based on heavy mechanical equipment and repetitive processes, thus becoming as economically demanding as they are time-consuming. Moreover, actual construction requirements originate higher demands for productivity and safety in earthwork constructions. Given the percentual weight of costs and duration of earthworks in infrastructure construction, the optimal usage of every resource in these tasks is paramount. Considering the characteristics of an earthwork construction, it can be looked at as a production line based on resources (mechanical equipment) and dependency relations between sequential tasks, hence being susceptible to optimization. Up to the present, the steady development of Information Technology areas, such as databases, artificial intelligence and operations research, has resulted in the emergence of several technologies with potential application bearing that purpose in mind. Among these, modern optimization methods (also known as metaheuristics), such as evolutionary computation, have the potential to find high quality optimal solutions with a reasonable use of computational resources. In this context, this work describes an optimization algorithm for earthworks equipment allocation based on a modern optimization approach, which takes advantage of the concept that an earthwork construction can be regarded as a production line.

Inteligência como dispositivo de poder

O objetivo do presente estudo, é compreender a inscrição individual e social de discursos usados por alunas, em diferentes posições de classe social, para explicar os seus sucessos académicos. Foram entrevistadas 19 alunas portuguesas do 11º ano de escolaridade provenientes das classes trabalhadora e alta, com elevado rendimento académico. A Análise Foucaudiana do Discurso aponta para a importância da posição de classe na construção dos sujeitos relativamente à sua conceção de inteligência e ao sucesso escolar. A inteligência funciona assim como um dispositivo de poder que regula as relações entre sujeitos de diferentes classes sociais.

Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls

Timber frame buildings are well known as an efficient seismic resistant structure popular all over the world not only due to their seismic performance, but also to their low cost and the strength they offer. These constructions still exist today and it is important to be able to preserve them, so a better knowledge on their behaviour is sought. Furthermore, historic technologies could be used even in modern constructions to build seismic resistant buildings using more natural materials with lesser costs. A great rehabilitation effort is being carried out on this type of buildings, as their neglect has led to decay or their change in use and alterations to the structure has led to the need to retrofit such buildings; only recently studies on their behaviour have become available and only a few of them address the issue of possible strengthening techniques for this kind of walls. In this scope, an innovative retrofitting technique (near surface mounted steel flat bars) is proposed and validated on traditional timber frame walls based on an extensive experimental program. The results of the static cyclic tests on distinct wall typologies retrofitted with the NSM technique are herein presented and discussed in detail. The main features on deformation, lateral stiffness, lateral resistance and seismic performance indexes are analysed

Where@UM - Dependable organic radio maps

In the past decade, the research community has been dedicating considerable effort into indoor positioning systems based on Wi-Fi fingerprinting techniques, mainly due to their capability to exploit existing infrastructures. Crowdsourcing approaches, also known as organic, have been proposed recently to address the problem of creating and maintaining the corresponding radio maps. In these organic systems, the users of the system build the radio map themselves while using it to estimate their own position/location. However, most of these collaborative methods, proposed by several authors, assume that all the users are honest and committed to contribute to a good quality radio map. In this paper we assess the quality of a radio map built collaboratively and propose a method to classify the credibility of individual contributions and the reputation of individual users. Experimental results are presented for an organic indoor location system that has been used by more than one hundred users over a period of around 12 months.

Design of a case-based reasoner for information security in military organizations

Information security is concerned with the protection of information, which can be stored, processed or transmitted within critical information systems of the organizations, against loss of confidentiality, integrity or availability. Protection measures to prevent these problems result through the implementation of controls at several dimensions: technical, administrative or physical. A vital objective for military organizations is to ensure superiority in contexts of information warfare and competitive intelligence. Therefore, the problem of information security in military organizations has been a topic of intensive work at both national and transnational levels, and extensive conceptual and standardization work is being produced. A current effort is therefore to develop automated decision support systems to assist military decision makers, at different levels in the command chain, to provide suitable control measures that can effectively deal with potential attacks and, at the same time, prevent, detect and contain vulnerabilities targeted at their information systems. The concept and processes of the Case-Based Reasoning (CBR) methodology outstandingly resembles classical military processes and doctrine, in particular the analysis of “lessons learned” and definition of “modes of action”. Therefore, the present paper addresses the modeling and design of a CBR system with two key objectives: to support an effective response in context of information security for military organizations; to allow for scenario planning and analysis for training and auditing processes.

Ergonomic analysis in a food packaging workplace

Work-related musculoskeletal disorders (WMSD) became one of the biggest health problems in the workplace and one of the main concerns of ergonomics and despite all the technical improvements manual handling is still an important risk factor for WMSD. The current study was performed with the main objective of conducting an ergonomic analysis in a workplace that consists in packaging products in a pallet, in a food distribution industry, also called picking. In this perspective, the aim of the study is to identify if the tasks performed by operators present any risk of WMSD and, if so, to suggest proposals for minimizing the associated effort. The methodologies of ergonomic risk assessment that were initially applied were the Risk Reckoner and the Manual Handling Assessment Chart (MAC). Subsequently, in order to, on the one hand, complement the analysis performed using the two methods previously mentioned, and, on the other hand, allow an assessment of two important risk factors associated with this activity (work postures and loads handling), two additional methodologies were also selected: the Revised NIOSH Lifting Equation and the Rapid Entire Body Assessment (REBA). In all the performed approaches, the tasks of palletizing at lower levels were identified as the ones that most penalize workers in what regards the risk of development of WMSD. All methodologies identified levels of risk that require an immediate or short-term ergonomic intervention, aiming at ensuring the safety and health of workers performing such activity. The implementation of measures designed to eliminate or minimize the risk may involve the allocation of significant human and material resources that is increasingly necessary to manage efficiently. Taking into account the complexity and variability of the developed tasks, it is recommended that such a decision can be preceded by a new study using more accurate risk assessment methodologies, such as those that use monitoring tools.

Automatic generation of ETL physical systems from BPMN conceptual models

ETL conceptual modeling is a very important activity in any data warehousing system project implementation. Owning a high-level system representation allowing for a clear identification of the main parts of a data warehousing system is clearly a great advantage, especially in early stages of design and development. However, the effort to model conceptually an ETL system rarely is properly rewarded. Translating ETL conceptual models directly into something that saves work and time on the concrete implementation of the system process it would be, in fact, a great help. In this paper we present and discuss a hybrid approach to this problem, combining the simplicity of interpretation and power of expression of BPMN on ETL systems conceptualization with the use of ETL patterns to produce automatically an ETL skeleton, a first prototype system, which has the ability to be executed in a commercial ETL tool like Kettle.