Production of Z bosons in proton-proton collisions at root out s = 10 TeV: Expectations for early measurements at the ATLAS experiment

The production of the Z boson in proton-proton collisions at the LHC serves as a standard candle at the ATLAS experiment during early data-taking. The decay of the Z into an electron-positron pair gives a clean signature in the detector that allows for calibration and performance studies. The cross-section of ~ 1 nb allows first LHC measurements of parton density functions. In this thesis, simulations of 10 TeV collisions at the ATLAS detector are studied. The challenges for an experimental measurement of the cross-section with an integrated luminositiy of 100 pb−1 are discussed. In preparation for the cross-section determination, the single-electron efficiencies are determined via a simulation based method and in a test of a data-driven ansatz. The two methods show a very good agreement and differ by ~ 3% at most. The ingredients of an inclusive and a differential Z production cross-section measurement at ATLAS are discussed and their possible contributions to systematic uncertainties are presented. For a combined sample of signal and background the expected uncertainty on the inclusive cross-section for an integrated luminosity of 100 pb−1 is determined to 1.5% (stat) +/- 4.2% (syst) +/- 10% (lumi). The possibilities for single-differential cross-section measurements in rapidity and transverse momentum of the Z boson, which are important quantities because of the impact on parton density functions and the capability to check for non-pertubative effects in pQCD, are outlined. The issues of an efficiency correction based on electron efficiencies as function of the electron’s transverse momentum and pseudorapidity are studied. A possible alternative is demonstrated by expanding the two-dimensional efficiencies with the additional dimension of the invariant mass of the two leptons of the Z decay.

Per un'archeologia del lavoro in eta' protobizantina. Organizzazione e committenza del cantiere edilizio attraverso i marchi dei marmorari

La ricerca riguarda lo studio del cantiere edilizio protobizantino, con particolare riferimento al ciclo della lavorazione del marmo. Quest’ultimo viene analizzato sotto il profilo amministrativo, tecnico, sociale ed artigianale. L’elemento guida della ricerca sono i marchi dei marmorari, sigle apposte da funzionari e maestranze durante il processo produttivo. Dapprima, fonti letterarie ed epigrafiche, tra cui le sigle di cava e officina su marmo, vengono esaminate per ricostruire il sistema alto-imperiale di amministrazione delle cave e di gestione dei flussi marmorei, nonché l’iter tecnico-artigianale adottato per la produzione dei manufatti. Il confronto con i dati disponibili per la tarda antichità, con particolare riferimento alle cave di Proconneso, evidenzia una sostanziale continuità della prassi burocratico-amministrativa, mentre alcuni cambiamenti si riscontrano nell’ambito produttivo-artigianale. Il funzionamento degli atelier marmorari viene approfondito attraverso lo studio dei marchi dei marmorari. Si tratta di caratteri greci singoli, multipli o monogrammi. Una ricognizione sistematica delle sigle dalla pars Orientalis dell’impero, reperite in bibliografia o da ricognizioni autoptiche, ha portato alla raccolta di circa 2360 attestazioni. Per esse si propone una classificazione tipologica tra sigle di cava, stoccaggio, officina. Tra le sigle di cava si annoverano sigle di controllo, destinazione/committenza, assemblaggio/posizionamento. Una particolare attenzione è riservata alle sigle di officina, riferibili ad un nome proprio di persona, ovvero al πρωτομαΐστωρ, il capo-bottega che supervisionava il lavoro dei propri artigiani e fungeva da garante del prodotto consegnato alla committenza. Attraverso lo studio comparato delle sigle reperite a Costantinopoli e in altri contesti si mette in luce la prassi operativa adottata dagli atelier nei processi di manifattura, affrontando anche il problema delle maestranze itineranti. Infine, sono analizzate fonti scritte di varia natura per poter collocare il fenomeno del marmo in un contesto socio-economico più ampio, con particolare riferimento alle figure professionali ed artigianali coinvolte nei cantieri e al problema della committenza.

Safety, Security And safeguards In GEN IV sodium fast reactors

This work presents first a study of the national and international laws in the fields of safety, security and safeguards. The international treaties and the recommendations issued by the IAEA as well as the national regulations in force in France, the United States and Italy are analyzed. As a result of this, a comparison among them is presented. Given the interest of the Japan Atomic Energy Agency for the aspects of criminal penalties and monetary, also the Japanese case is analyzed. The main part of this work was held at the JAEA in the field of proliferation resistance (PR) and physical protection (PP) of a GEN IV sodium fast reactor. For this purpose the design of the system is completed and the PR & PP methodology is applied to obtain data usable by designers for the improvement of the system itself. Due to the presence of sensitive data, not all the details can be disclosed. The reactor site of a hypothetical and commercial sodium-cooled fast neutron nuclear reactor system (SFR) is used as the target NES for the application of the methodology. The methodology is applied to all the PR and PP scenarios: diversion, misuse and breakout; theft and sabotage. The methodology is applied to the SFR to check if this system meets the target of PR and PP as described in the GIF goal; secondly, a comparison between the SFR and a LWR is performed to evaluate if and how it would be possible to improve the PR&PP of the SFR. The comparison is implemented according to the example development target: achieving PR&PP similar or superior to domestic and international ALWR. Three main actions were performed: implement the evaluation methodology; characterize the PR&PP for the nuclear energy system; identify recommendations for system designers through the comparison.

Etablierung eines humanisierten Mausmodells zur In-vivo-Analyse von DC-adressierenden Nanopartikeln

In dieser Arbeit wurde zunächst ein humanisiertes Mausmodell entwickelt für die Analyse von humanen DCs in vivo. Darüber hinaus wurden erste Versuche mit Nanopartikelbeladenen DCs durchgeführt, mit der Intention, durch diese Kombination humane DCs zu untersuchen. Es wurden immunsupprimierte NOD/LtSz-scid IL2R (NSG) Mäuse verwendet und mit humanen CD34+ PBSCs transplantiert. Es wurden insgesamt 14 Modelle getestet, mit einer durchschnittlichen Humanisierungsrate von 76 %. In allen Modellen konnten ab Woche sechs nach Transplantation humane CD45+ Zellen sowie humane Bund NK-Zellen und CD14+ Monozyten gefunden werden. Darüber hinaus waren myeloide DC-Vorläuferzellen, konventionelle HLA DR CD11c DCs (cDCs) und plasmazytoide DCs (pDCs) vorhanden. Humane T-Zellen konnten nicht vor Woche 18 nach Transplantation beobachtet werden. Neben der Rekonstitution humaner DCs in peripheren Organen, wurde ebenfalls nach gewebsständigen DCs, insbesondere den Langerhans Zellen (LCs) der Epidermis geschaut. Waren humane LC vorhanden, konnten diese ab Woche zwölf nach Transplantation in der murinen Epidermis detektiert werden. Diese waren konstant bis in Woche 30 nach Transplantation nachweisbar. In Hinblick auf die Etablierung der DCs in diesem humanisierten Mausmodells wurden verschiedene Einflussgrößen getestet. IL-7 führte zu keiner veränderten Hämatopoese, wohingegen Flt3L zu einer Zunahme von CD14+ Monozyten und cDCs führte. Darüber hinaus konnte eine drastische Abnahmernhumaner B-Zellen beobachtet werden. Es zeigte sich, dass der Zeitpunkt der Flt3LrnApplikation einen entscheidenen Faktor für den Effekt von Flt3L auf die Rekonstitution humaner Zellen darstellt. Für die in dieser Arbeit durchgeführten funktionellen in vivo Studien, wurden humanisierten Mäusen alloreaktive CD8+ T-Zellen appliziert. Somit sollte die Funktionalität der rekonstituierten humanen APCs getestet werden. Es wurde deutlich, dass Monozyten und DCs ihre Funktionalität erst ab Woche 14 nach Transplantation zu entwickeln schienen,rnwohingegen B-Zellen bereits zu früheren Zeitpunkten als Zielzellen für die alloreaktiven T-Zellen dienten. Dies wurde durch den Rückgang der jeweiligen Zellen nach Applikation der T-Zellen sichtbar. Zu erwähnen ist, dass das Anwachsen einer humanen Hämatopoese stark spenderabhängig ist und somit keine allgemeingültigen Aussagen hinsichtlich der in vivo Funktion getroffen werden können. Um im Gewebe verbliebende APCs zu manipulieren gibt es verschiedene Möglichkeiten. Im Rahmen dieser Arbeit wurden auf Polystyren-basierende Nanopartikel getestet. Die verwendeten Partikel hatten eine Größe von 80 bis 160 nm und waren unfunktionalisiert oder mit Amino- bzw. Carboxy-Gruppen versehen. Zusätzlich wurden die Partikel mit BODIPY (Durchflusszytometrie und kLSM-Messungen), einem Infrarotnahem Farbstoff IR 780 (BFI-Messungen) und Platin (in vivo Messungen) beladen. Der Carboxy-funktionalisierte Partikel zeigte den geringsten Einfluss auf die Vitalität von humanen DCs, wohingegen der Amino-funktionalisierte Partikel bei steigender Konzentration toxisch wirkte. Bei unfunktionalisierten Partikeln stieg die Toxizität bei zunehmender Konzentration. Hinsichtlich der Expression diverser DC spezifischer Oberflächenmoleküle nach Beladung mit Nanopartikeln zeigte sich, dass allein der unfunktionalisierte, mit Lutensol AT50 hergestellte Partikel zu einer leichten Hochregulation von MHC-Klasse-II Molekülen führte. Die Expression von CD86 wurde im Gegenzug nur durch die Beladung mit den Amino-, bzw. Carboxy funktionalisierten Partikeln und dem unfunktionalisierten, mit SDS hergestellten Partikel leicht gesteigert. Trotz der teilweise leicht veränderten Expression von Oberflächenmarkern, konnte mit Hilfe von IFN-g ELISpots keine Beeinflussungrnder Funktion als APCs von Nanopartikel-beladenen DCs beobachtet werden. In den in vivo Untersuchungen zeigten alle vier Partikel eine konstante Zirkulation imrnOrganismus und konnten bis 96 h nach Applikation nachgewiesen werden. Alle Partikel konnten primär in der Leber detektiert werden, wobei der unfunktionalisierte, mit Lutensol AT50 hergestelle Partikel das weiteste Verbreitungsmuster zeigte. Erste Versuche im humanisierten Mausmodell zeigten keine Beeinflussung der Verteilung und Kinetik von Nanopartikeln durch die humane Hämatopoese. Mit dem in dieser Arbeit etablierten humanisierten Mausmodell ist es möglich, die Entwicklung, Differenzierung, Aktivierung und Funktionalität humaner DCs in vivo zu untersuchen. Darüber hinaus kann das gezielte Adressieren von DCs in vivo analysiert werden, was sowohl die Möglichkeit der Manipulation von DCs zur Vermeidung einer akuten GvHD bietet als auch Verwendung in anderen DC-vermittelten Therapien (z.B.Vakzinationsstudien) findet.

A novel marker for heart failure: Cross sectional area assessment in a large vein by conductance catheter.

The present study investigates the feasibility of a new application able to check the heart failure status in a patient through the estimation of the venous distension. In this way it would be possible to follow up patients, avoiding invasive or expensive exams such as cardiac catheterization and echocardiography. Moreover, the devices would also be able to diagnose the decline of the disease, in order to allow a new adaptation to therapy, and vice versa to check the improvement in the patient’s conditions after the CRT device implant. This thesis is essentially divided into three parts: an analytical model was used to obtain an estimation of the error committed for the calculation of the CSA and to understand how the accuracy and sensitivity depend on the different configurations of the electrodes and the catheter position inside the vein; secondly, an in-vitro experiment was carried out in order to verify the practical feasibility for these kinds of measurements, in a very simplified model; in the end, several animal experiments were done to test the in-vivo practicability of the proposed method. The obtained results showed the feasibility of this approach. In fact, the error committed in the estimation of CSA, during the animal experiments, can be considered acceptable (CSAerror_max ≈ -14%). Moreover, it has been demonstrated that the conductance catheter allows assessing, not only the vein CSA, but also the breathing of the animal.

Computing primal solutions with exact arithmetics in SCIP.

The research for exact solutions of mixed integer problems is an active topic in the scientific community. State-of-the-art MIP solvers exploit a floating- point numerical representation, therefore introducing small approximations. Although such MIP solvers yield reliable results for the majority of problems, there are cases in which a higher accuracy is required. Indeed, it is known that for some applications floating-point solvers provide falsely feasible solutions, i.e. solutions marked as feasible because of approximations that would not pass a check with exact arithmetic and cannot be practically implemented. The framework of the current dissertation is SCIP, a mixed integer programs solver mainly developed at Zuse Institute Berlin. In the same site we considered a new approach for exactly solving MIPs. Specifically, we developed a constraint handler to plug into SCIP, with the aim to analyze the accuracy of provided floating-point solutions and compute exact primal solutions starting from floating-point ones. We conducted a few computational experiments to test the exact primal constraint handler through the adoption of two main settings. Analysis mode allowed to collect statistics about current SCIP solutions' reliability. Our results confirm that floating-point solutions are accurate enough with respect to many instances. However, our analysis highlighted the presence of numerical errors of variable entity. By using the enforce mode, our constraint handler is able to suggest exact solutions starting from the integer part of a floating-point solution. With the latter setting, results show a general improvement of the quality of provided final solutions, without a significant loss of performances.

Assimilation of data from conventional and non conventional networks through a LETKF scheme in the COSMO model

The present work studies a km-scale data assimilation scheme based on a LETKF developed for the COSMO model. The aim is to evaluate the impact of the assimilation of two different types of data: temperature, humidity, pressure and wind data from conventional networks (SYNOP, TEMP, AIREP reports) and 3d reflectivity from radar volume. A 3-hourly continuous assimilation cycle has been implemented over an Italian domain, based on a 20 member ensemble, with boundary conditions provided from ECMWF ENS. Three different experiments have been run for evaluating the performance of the assimilation on one week in October 2014 during which Genova flood and Parma flood took place: a control run of the data assimilation cycle with assimilation of data from conventional networks only, a second run in which the SPPT scheme is activated into the COSMO model, a third run in which also reflectivity volumes from meteorological radar are assimilated. Objective evaluation of the experiments has been carried out both on case studies and on the entire week: check of the analysis increments, computing the Desroziers statistics for SYNOP, TEMP, AIREP and RADAR, over the Italian domain, verification of the analyses against data not assimilated (temperature at the lowest model level objectively verified against SYNOP data), and objective verification of the deterministic forecasts initialised with the KENDA analyses for each of the three experiments.

Clues on the frequency of giant planets in wide orbits

The available results of deep imaging searches for planetary companions around nearby stars provide us useful constraints on the frequencies of giant planets in very wide orbits. Here we present some preliminary results of the Monte Carlo simulation which compare the published detection limits with the generated planetary masses and orbital parameters. This allow us to consider the impications of the null detection, which comes from the direct imaging techniques, on the distributions of mass and semimajor axis derived from the results of the other search techniques and also to check the agreement of the observations with the available planetary formation models.

Assessment of total uncertainty in cocaine and benzoylecgonine wastewater load measurements

To check the effectiveness of campaigns preventing drug abuse or indicating local effects of efforts against drug trafficking, it is beneficial to know consumed amounts of substances in a high spatial and temporal resolution. The analysis of drugs of abuse in wastewater (WW) has the potential to provide this information. In this study, the reliability of WW drug consumption estimates is assessed and a novel method presented to calculate the total uncertainty in observed WW cocaine (COC) and benzoylecgonine (BE) loads. Specifically, uncertainties resulting from discharge measurements, chemical analysis and the applied sampling scheme were addressed and three approaches presented. These consist of (i) a generic model-based procedure to investigate the influence of the sampling scheme on the uncertainty of observed or expected drug loads, (ii) a comparative analysis of two analytical methods (high performance liquid chromatography-tandem mass spectrometry and gas chromatography-mass spectrometry), including an extended cross-validation by influent profiling over several days, and (iii) monitoring COC and BE concentrations in WW of the largest Swiss sewage treatment plants. In addition, the COC and BE loads observed in the sewage treatment plant of the city of Berne were used to back-calculate the COC consumption. The estimated mean daily consumed amount was 107 ± 21 g of pure COC, corresponding to 321 g of street-grade COC.

Endocrine changes and liver mRNA abundance of somatotropic axis and insulin system constituents during negative energy balance at different stages of lactation in dairy cows

The liver has an important role in metabolic regulation and control of the somatotropic axis to adapt successfully to physiological and environmental changes in dairy cows. The aim of this study was to investigate the adaptation to negative energy balance (NEB) at parturition and to a deliberately induced NEB by feed restriction at 100 days in milk. The hepatic gene expression and the endocrine system of the somatotropic axis and related parameters were compared between the early and late NEB period. Fifty multiparous cows were subjected to 3 periods (1=early lactation up to 12 wk postpartum, 2=feed restriction for 3 wk beginning at around 100 days in milk with a feed-restricted and a control group, and 3=subsequent realimentation period for the feed-restricted group for 8 wk). In period 1, plasma growth hormone reached a maximum in early lactation, whereas insulin-like growth factor-I (IGF-I), leptin, the thyroid hormones, insulin, and the revised quantitative insulin sensitivity check index increased gradually after a nadir in early lactation. Three days after parturition, hepatic mRNA abundance of growth hormone receptor 1A, IGF-I, IGF-I receptor and IGF-binding protein-3 (IGFBP-3) were decreased, whereas mRNA of IGFBP-1 and -2 and insulin receptor were upregulated as compared with wk 3 antepartum. During period 2, feed-restricted cows showed decreased plasma concentrations of IGF-I and leptin compared with those of control cows. The revised quantitative insulin sensitivity check index was lower for feed-restricted cows (period 2) than for control cows. Compared with the NEB in period 1, the changes due to the deliberately induced NEB (period 2) in hormones were less pronounced. At the end of the 3-wk feed restriction, the mRNA abundance of IGF-I, IGFBP-1, -2, -3, and insulin receptor was increased as compared with the control group. The different effects of energy deficiency at the 2 stages in lactation show that the endocrine regulation changes qualitatively and quantitatively during the course of lactation.

Hoisting C Structures Into Clay In Device Drivers

This project addresses the unreliability of operating system code, in particular in device drivers. Device driver software is the interface between the operating system and the device's hardware. Device drivers are written in low level code, making them difficult to understand. Almost all device drivers are written in the programming language C which allows for direct manipulation of memory. Due to the complexity of manual movement of data, most mistakes in operating systems occur in device driver code. The programming language Clay can be used to check device driver code at compile-time. Clay does most of its error checking statically to minimize the overhead of run-time checks in order to stay competitive with C's performance time. The Clay compiler can detect a lot more types of errors than the C compiler like buffer overflows, kernel stack overflows, NULL pointer uses, freed memory uses, and aliasing errors. Clay code that successfully compiles is guaranteed to run without failing on errors that Clay can detect. Even though C is unsafe, currently most device drivers are written in it. Not only are device drivers the part of the operating system most likely to fail, they also are the largest part of the operating system. As rewriting every existing device driver in Clay by hand would be impractical, this thesis is part of a project to automate translation of existing drivers from C to Clay. Although C and Clay both allow low level manipulation of data and fill the same niche for developing low level code, they have different syntax, type systems, and paradigms. This paper explores how C can be translated into Clay. It identifies what part of C device drivers cannot be translated into Clay and what information drivers in Clay will require that C cannot provide. It also explains how these translations will occur by explaining how each C structure is represented in the compiler and how these structures are changed to represent a Clay structure.

Gesundheitsförderung und Prävention in der Arztpraxis

Gesundheitsförderung und Prävention sind wichtige Aufgaben in der Hausarztpraxis. Das bestehende Vertrauensverhältnis zwischen Patient und Arzt erleichtert es, die PatientInnen in der Sprechstunde auf ihr Gesundheitsverhalten anzusprechen, z.B. auf Rauchen, risikoreichen Sex oder übermäßigen Alkoholkonsum. Weitere Gesundheitsrisiken werden in der periodischen Gesundheitsuntersuchung (Check-up) erfasst. In diesem Abschnitt besprechen wir die Beratung in der Arztpraxis, diskutieren über periodische Gesundheitsuntersuchungen und loten die Grenzen von Prävention und Gesundheitsförderung in diesem Setting aus. Schweizerische Lernziele: CPH 31

The Influence of the Social and Cultural Environment on a Child's Playing in the First Three Years of Life

The research focused on children's behaviour in playing with objects both independently and in interaction with adults. It was based on studies of 40 Slovene children in 4 age groups (6,12,18 and 24 months) and of 23 Croatian children in 2 age groups (18 and 24 months). All the children were sampled proportionally by their gender and the educational level of their parents (middle and higher). Several coding check lists with satisfactory internal consistency were constructed during the study and used to analyse the video-recorded playing sessions with each child. The basic conclusion reached was that even in early childhood playing behaviour differs significantly between the infants from the two Central European countries. The difference lies not so much in the structure or the content of the playing actions, but in the way in which the infants deal playfully with the objects. This difference appears regardless of the type of object the infants are playing with and even regardless of the playing condition. It can best be described as the difference between the first significant discriminant function activity versus passivity. The Slovene infants were found to be on the active pole and the Croatians on the passive one. Social and gender differences were much less significant than cultural ones in determining the structure, the content and the way of playing. Significant age differences appeared in all three aspects, which was consistent with general trends in infants' psychological development. The group define the Slovene interactive playing style as object oriented, while the Croatian one was largely communicated oriented. Within the experimenter-infant dyads, children of both cultures played at a developmentally more advanced level than they did with their mothers, showing that the mothers were not as successful at reaching the ZPD as were the trained experimenters. In addition, the children of mothers who attributed more cognitive benefit to play played on a more advanced level than those whose mothers attributed more emotional benefit to play. The quality of the object the children were playing with was also significantly related to the structure, content and partly the way of dealing with the objects. Highly-structured objects stimulated complex play and low-structured ones stimulated simple play, regardless of playing conditions. The group concluded that both culture and the quality of the available object have an important impact on young children's play. Through the playing interaction, the infants internalise culturally specific patterns of behaviour and culturally specific meanings. These internalisations become apparent very early in their lives, even in non-social situations. On the other hand, the objects themselves have an impact on the level of infants' play. When they do not provide sufficient perceptive and functional support for a representational action, the infants' play will lag behind their actual developmental capacities.

Tumour suppressors in liver carcinogenesis

The circuitous cell signalling pathways of hepatocytes comprise several factors that operate to downgrade or even interrupt the transmission of a given signal. These down-regulating influences are essential to keep cell proliferation and cell survival in check and if impaired, can alter a delicate balance in favour of cell proliferation. Each signalling pathway that has been implicated in carcinogenesis is influenced by both oncogenic factors that promote tumour growth when activated as well as tumour suppressor proteins that have to be impaired to favour tumour growth. This summary of the Tumour Suppressors in Liver Carcinogenesis Symposium held at the 2007 EASL Annual Meeting discusses four pathways with pre-eminent tumour suppressor activity, each involved in hepatocarcinogenesis: p53, mTOR, beta-catenin and hedgehog.

Digital forensic osteology--possibilities in cooperation with the Virtopsy project

The present study was carried out to check whether classic osteometric parameters can be determined from the 3D reconstructions of MSCT (multislice computed tomography) scans acquired in the context of the Virtopsy project. To this end, four isolated and macerated skulls were examined by six examiners. First the skulls were conventionally (manually) measured using 32 internationally accepted linear measurements. Then the skulls were scanned by the use of MSCT with slice thicknesses of 1.25 mm and 0.63 mm, and the 33 measurements were virtually determined on the digital 3D reconstructions of the skulls. The results of the traditional and the digital measurements were compared for each examiner to figure out variations. Furthermore, several parameters were measured on the cranium and postcranium during an autopsy and compared to the values that had been measured on a 3D reconstruction from a previously acquired postmortem MSCT scan. The results indicate that equivalent osteometric values can be obtained from digital 3D reconstructions from MSCT scans using a slice thickness of 1.25 mm, and from conventional manual examinations. The measurements taken from a corpse during an autopsy could also be validated with the methods used for the digital 3D reconstructions in the context of the Virtopsy project. Future aims are the assessment and biostatistical evaluation in respect to sex, age and stature of all data sets stored in the Virtopsy project so far, as well as of future data sets. Furthermore, a definition of new parameters, only measurable with the aid of MSCT data would be conceivable.