Critical comparative evaluation of design methodologies for the ultimate limit state of fatigue in concrete structures

La aparición de la fatiga ha sido ampliamente investigada en el acero y en otros materiales metálicos, sin embargo no se conoce en tanta profundidad en el hormigón estructural. Esto crea falta de uniformidad y enfoque en el proceso de verificación de estructuras de hormigón para el estado límite último de la fatiga. A medida que se llevan a cabo más investigaciones, la información sobre los parámetros que afectan a la fatiga en el hormigón comienzan a ser difundidos e incluso los que les afectan de forma indirecta. Esto conlleva a que se estén incorporando en las guías de diseño de todo el mundo, a pesar de que la comprobación del estado límite último no se trata por igual entre los distintos órganos de diseño. Este trabajo presentará un conocimiento básico del fenómeno de la fatiga, qué lo causa y qué condiciones de carga o propiedades materiales amplían o reducen la probabilidad de fallo por fatiga. Cuatro distintos códigos de diseño serán expuestos y su proceso de verificación ha sido examinado, comparados y valorados cualitativa y cuantitativamente. Una torre eólica, como ejemplo, fue analizada usando los procedimientos de verificación como se indica en sus respectivos códigos de referencia. The occurrence of fatigue has been extensively researched in steel and other metallic materials it is however, not as broadly understood in concrete. This produces a lack of uniformity in the approach and process in the verification of concrete structures for the ultimate limit state of fatigue. As more research is conducted and more information is known about the parameters which cause, propagate, and indirectly affect fatigue in concrete, they are incorporated in design guides around the world. Nevertheless, this ultimate limit state verification is not addressed equally by various design governing bodies. This report presents a baseline understanding of what the phenomenon of fatigue is, what causes it, and what loading or material conditions amplify or reduce the likelihood of fatigue failure. Four different design codes are exposed and their verification process has been examined, compared and evaluated both qualitatively and quantitatively. Using a wind turbine tower structure as case study, this report presents calculated results following the verification processes as instructed in the respective reference codes.

Diseño de una Metodología de Política Pública de I+D+i para el Desarrollo de la Capacidad de la Innovación en el Sector PYMIS del estado Bolívar, Venezuela

El estado Bolívar con una superficie de 238.000 Km2 se encuentra ubicado al SE de Venezuela y su capital es Ciudad Bolívar. Ocupa el 26,24% de la superficie del territorio nacional. Ciudad Guayana es la principal región del desarrollo económico del estado siendo sede de las empresas básicas de los sectores siderúrgicos y del aluminio que se encargan de la extracción, procesamiento y transformación del mineral de hierro y de la transformación de la bauxita en aluminio primario. Además, cuenta con un gran potencial hidroeléctrico, garantizando el suministro de energía eléctrica para el funcionamiento de las empresas básicas, para el parque industrial de la región, así como para el desarrollo industrial, económico y social de la nación. Con relación al sector de la industria del mineral de hierro y del aluminio, las empresas destinan más del 60 por ciento de su producción al mercado internacional. A pesar de que el sector de las Pequeñas y Medianas Industrias (PYMIS) del estado Bolívar cuenta con un mercado cercano y seguro, no se le ha propiciado un desarrollo integral en términos de orientar sus esfuerzos en innovar en nuevos productos o mejoras de procesos. Debido a la falta del personal de investigación calificado, la escasa vinculación con centros de investigación, la baja inversión en investigación, desarrollo tecnológico e innovación (I+D+i), la ausencia de la aplicación de una política pública de I+D+i y la desarticulación de los miembros del Sistema Regional de Innovación (SRI), constituyen los principales obstáculos para generar bienes y servicios con un alto valor agregado. Esta situación desequilibra y hace ineficiente el funcionamiento del SRI. La baja capacidad de las PYMIS del estado Bolívar en I+D+i, es una situación que impide generar por si sola nuevos productos o procesos para satisfacer las demandas del mercado regional. Por lo tanto, se requiere de la intervención y participación activa de la institución gubernamental responsable del diseño y aplicación de una política pública de I+D+i para dinamizar la capacidad de innovación en las PYMIS, en su articulación y vinculación con los miembros del SRI. xiii El presente proyecto se planteó como objetivo diseñar una metodología de política pública de I+D+i para liderar, coordinar y direccionar el SRI del estado Bolívar, para el desarrollo de la capacidad de innovación en el sector industrial y específicamente en las PYMIS. La presente tesis representa una investigación no experimental de tipo proyectivo que analiza la situación actual del Sistema Regional de Innovación del estado Bolívar. El análisis de los resultados se ha dividido en tres fases. En la primera se realizan diagnósticos por medio de encuestas de las PYMIS en materia de I+D+i, de los centros y laboratorios de investigación pertenecientes a las universidades de la región en el área de Materiales y de los sectores financieros público y privado. En dichas encuestas se evalúa el nivel de integración con los entes gubernamentales que definen y administran la política pública de I+D+i. En la segunda fase, con el diagnóstico y procesamiento de los resultados de la primera fase, se procede a desarrollar un análisis de las fortalezas, oportunidades, debilidades y amenazas (FODA) del Sistema Regional de Innovación, permitiendo comprender la situación actual de la relación y vinculación de las PYMIS con los centros de investigación, instituciones financieras y entes gubernamentales. Con la problemática detectada, resultó necesario el diseño de estrategias y un modelo de gestión de política pública de I+D+i para la articulación de los miembros del SRI, para el apoyo de las PYMIS. En la tercera fase se diseña la metodología de política pública de I+D+i para fortalecer la innovación en las PYMIS. La metodología se representa a través de un modelo propuesto que se relaciona con las teorías de los procesos de innovación, con los modelos de sistemas de innovación y con las reflexiones y recomendaciones hechas por diferentes investigadores e instituciones de cooperación internacional referentes a la aplicación de políticas públicas de I+D+i para dinamizar la capacidad de innovación en el sector industrial. La metodología diseñada es comparada con diferentes modelos de aplicación de política pública de I+D+i. Cada modelo se representa en una figura y se analiza su xiv situación presente y la función que desempeña el ente gubernamental en la aplicación del enfoque de política pública de I+D+i. El diseño de la metodología de política pública de I+D+i propuesta aportará nuevos conocimientos y podrá ser aplicado para apoyar el progreso de la I+D+i en las PYMIS de la región, como caso de estudio, con el fin de impulsar una economía más competitiva y reducir el grado de dependencia tecnológica. La metodología una vez evaluada podrá ser empleada en el contexto de la gran industria y en otras regiones de Venezuela y además, puede aplicarse en otros países con características similares en su tejido industrial. En la tesis doctoral se concluye que el desarrollo de la capacidad de innovación en las PYMIS depende del diseño y aplicación de la política pública de I+D+i como elemento dinamizador y articulador del SRI del estado Bolívar. xv ABSTRACT The Bolivar state with an area of 238,000 km2 is located in the SE of Venezuela and its capital is Ciudad Bolivar. It occupies a surface which is 26.24% of the national territory. Ciudad Guayana is the main area of the state's economic development and the location of the corporate headquarters of the basic steel and aluminum sectors that are responsible for the extraction, processing and transformation of iron ore and bauxite processing for primary aluminum. It also has a great hydroelectric potential, ensuring the supply of electricity for the operation of enterprises, for the regional industrial park as well as for the industrial, economic and social development of the nation. With regard to the iron ore and aluminum industry, companies allocate more than 60 percent of their production to the international market. Although the sector of Small and Medium Industries (SMIs) of the Bolivar state has a secure market, it has not been led to an integral development in terms of targeting its efforts on innovating new products or improving processes. Due to the lack of qualified research staff, poor links with research centers, low investment in research, technological development and innovation (R & D & I), the absence of the implementation of a public policy for R & D & I and the dismantling of the members of the Regional Innovation System (RIS), are the main obstacles to generate goods and services with high added value. This situation makes the RIS unbalanced and inefficient. The low capacity of Bolivar state’s SMIs in R & D & I, is a situation that cannot generate by itself new products or processes to meet regional market demands. Therefore, it requires the active involvement and participation of the government institution responsible for the design and implementation of R & D & I public policy to boost the innovation capacity in SMIs, through the connection and integration with members of the RIS. This project is intended to design a methodology aimed at public policy for R & D & I to lead, coordinate and direct the RIS of Bolivar state, for the development of innovation capacity in the industrial sector and specifically in the SMIs. xvi This thesis is an experimental investigation of projective type which analyzes the current situation of the Regional Innovation System of the Bolivar state. The analysis of the results is divided into three phases. In the first one, a diagnosis is performed through surveys of SMIs in R & D & I centers and research laboratories belonging to the universities of the region in the area of materials and public and private financial sectors. In such surveys the level of integration with government agencies that define and manage the public policy of R & D & I is assessed. In the second phase, with the diagnosis and processing of the results of the first phase, we proceed to develop an analysis of the strengths, weaknesses, opportunities and threats (SWOT) of the Regional Innovation System, allowing the comprehension of the current status of the relationship of SMIs with research centers, financial institutions and government agencies. With the problems identified it was necessary to design strategies and a model of public policy management of R & D & I for the articulation of the members of the RIS, to support the SMIs. In the third phase a public policy methodology for R & D & I is designed in order to strengthen innovation in SMIs. The methodology is shown through a proposed model that relates to the theories of the innovation process, with models of innovation systems and with the discussions and recommendations made by different researchers and institutions of international cooperation concerning the implementation of policies public for R & D & I to boost innovation capacity in the industrial sector. The methodology designed is compared with different models of public policy implementation for R & D & I. Each model is represented in a figure and its current situation and the role of the government agency in the implementation of the public policy approach to R & D & I is analyzed. The design of the proposed public policy methodology for R & D & I will provide new knowledge and can be applied to support the progress of R & D & I in the region’s SMIs, as a case study, in order to boost a more competitive economy and reduce the degree of technological dependence. After being evaluated the methodology can be used in the context of big industry and in other regions of Venezuela and can also be applied in other countries with similar characteristics in their industrial structure. xvii The thesis concludes that the development of the innovation capacity in SMIs depends on the design and implementation of the public policy for R & D & I as a catalyst and coordination mechanism of the Regional Innovation System of the Bolivar state.

Analysis of microscopic magnitudes of radiative blast waves launched in xenon clusters with collisional-radiative steady-state simulations

Radiative shock waves play a pivotal role in the transport energy into the stellar medium. This fact has led to many efforts to scale the astrophysical phenomena to accessible laboratory conditions and their study has been highlighted as an area requiring further experimental investigations. Low density material with high atomic mass is suitable to achieve radiative regime, and, therefore, low density xenon gas is commonly used for the medium in which the radiative shocks such as radiative blast waves propagate. In this work, by means of collisional-radiative steady-state calculations, a characterization and an analysis of microscopic magnitudes of laboratory blast waves launched in xenon clusters are made. Thus, for example, the average ionization, the charge state distribution, the cooling time or photon mean free paths are studied. Furthermore, for a particular experiment, the effects of the self-absorption and self-emission in the specific intensity emitted by the shock front and that is going through the radiative precursor are investigated. Finally, for that experiment, since the electron temperature is not measured experimentally, an estimation of this magnitude is made both for the shock shell and the radiative precursor.

Space-state robust control of a Buck converter with amorphous core coil and variable load

Pulse-width modulation is widely used to control electronic converters. One of the most frequently used topologies for high DC voltage/low DC voltage conversion is the Buck converter. These converters are described by a second order system with an LC filter between the switching subsystem and the load. The use of a coil with an amorphous magnetic material core rather than an air core permits the design of smaller converters. If high switching frequencies are used to obtain high quality voltage output, then the value of the auto inductance L is reduced over time. Robust controllers are thus needed if the accuracy of the converter response must be preserved under auto inductance and payload variations. This paper presents a robust controller for a Buck converter based on a state space feedback control system combined with an additional virtual space variable which minimizes the effects of the inductance and load variations when a switching frequency that is not too high is applied. The system exhibits a null steady-state average error response for the entire range of parameter variations. Simulation results and a comparison with a standard PID controller are also presented.

Geomorphological analysis and evolution of an altered floodplain drainage system. The case of the Partido Stream (Spain)

The Partido Stream is a small torrential course that flows into the marsh of the Doñana National Park, an area that was declared a World Heritage Site in 1994. Before 1981, floods occurred, and the stream overflowed onto a floodplain. As an old alluvial fan, the floodplain has its singular orography and functionality. Fromthe floodplain, several drainage channels, locally called caño, discharged into themarsh. The Partido Streamhad themorphology of a caño and covered approximately 8 km from the old fan to the marsh. The stream was straightened and channelised in 1981 to cultivate the old fan. This resulted in floods that were concentrated between the banks in the following years, which caused the depth of water and the shear stress to increase, thus, scouring the river bed and river banks. In this case, the eroded materials were carried towards the marsh where a new alluvial fan evolved. Control measures on the old fan were implemented in 2006 to stop the development of the new alluvial fan downstream over the marsh. Thus, the stream would partially recover its original behaviour that it had before channelisation, moving forwards in a new, balanced state. The present study describes the geomorphological evolution that channelisation has caused since 1981 and the later slow process of recovery of the original hydraulic-sedimentation regime since 2006. Additionally, it deepens the understanding of the original hydraulic behaviour of the stream, combining field data and 2D simulations.

Alteración del comportamiento hidráulico natural de la vertiente noreste de la marisma de El Rocío por efectos antrópicos

El geo-dinamismo torrencial es resultado de la incidencia de precipitaciones torrenciales en la cuenca hidrográfica, y se manifiesta por una intensificación del ciclo del agua (con la presencia de mayores volúmenes de escorrentía y la consiguiente aparición de repentinos y elevados caudales de avenida) e intensificación del ciclo de los sedimentos (mayor erosión del suelo, incremento del transporte de sedimentos en los cauces de drenaje y la formación de grades depósitos de sedimentos en el área dominada de la cuenca). Estos procesos naturales se pueden agravar si se realizan en la cuenca actuaciones que alteren sustancialmente su morfología; es el caso del arroyo del Partido, tributario a la marisma de El Rocío en el Parque Nacional de Doñana, cuyo encauzamiento del tramo final sobre su antiguo cono de sedimentación fue el causante de la formación de un nuevo cono de sedimentación sobre la marisma. Pero las intervenciones antrópicas también pueden dirigir el sistema hacia la estabilidad sedimentaria y el tramo final del arroyo del Partido ha experimentado asimismo actuaciones de carácter restaurador. El antiguo cono de sedimentación del arroyo del Partido es un lugar complejo en el que drenan también otros tres cursos que intercambian sus flujos con dicho arroyo durante las avenidas. Esta Memoria analiza cuatro situaciones del paraje objeto de estudio: la primera responde al estado original del lugar en cuestión (situación A); la segunda a la creada tras el encauzamiento del arroyo del Partido en 1981 (situación B); la tercera a la formada pasado un tiempo desde el encauzamiento, cuando el geo-dinamismo del lugar hizo sus efectos sobre el paraje en cuestión (situación C); y la cuarta la generada tras la restauración en el verano de 2006 del régimen hidráulico-sedimentario del arroyo del Partido con la Actuación núm. 3 del Proyecto Doñana 2005. Se han investigado los efectos que la alteración de la morfología del sistema de drenaje del antiguo cono de sedimentación del arroyo del Partido causa en los parámetros hidráulicos que desencadenan el geo-dinamismo torrencial. Para ello se han reproducido las condiciones morfológicas de las cuatro situaciones más representativas ya comentadas que ha experimentado el paraje en los últimos 30 años y que han condicionado el comportamiento de las avenidas torrenciales ocurridas en dicho periodo. En este contexto se ha elaborado un modelo hidrológico con el programa HECHMS a partir de la información disponible y un modelo hidrodinámico en 2D con el programa IBER; con este último se han comparado ocho escenarios característicos derivados de la incidencia de dos avenidas representativas de los eventos torrenciales de la zona sobre las morfologías contempladas. También se ha estudiado la tensión de arrastre de las avenidas dada su incidencia en el terreno sobre el que transitan, analizando de manera separada los efectos en los cuatro cauces de drenaje del antiguo cono de sedimentación y del resto de la superficie del mismo. La investigación realizada ha permitido describir minuciosamente el comportamiento de los drenajes locales del antiguo y complejo cono de sedimentación que bordea el noroeste de la marisma del Parque Nacional de Doñana, desde la marisma de El Rocío hasta la marisma gallega, lo que redundará en beneficio de la gestión del Parque Nacional de Doñana y de su entorno, y especialmente en la seguridad del perímetro oriental de la aldea de El Rocío. ABSTRACT The torrential geo-dynamism results from the effect of torrential precipitations on the hydrological watershed, and it shows ups with the intensification of the water cycle (with presence of higher volumes of run-off and the consequent appearance of sudden and high food flows) and intensification of the sediment cycle (higher soil erosion, increase of sediment transport in the drainage courses and the formation of big sediment deposits in the area downstream the watershed). These natural processes can worsen if actions that change the morphology of the watershed are carried out. It is the case of the Partido stream, tributary of the marsh of El Rocío in the Doñana National Park, whose channelization of the final stretch over its old alluvial fan was the cause of the formation of a new alluvial fan over the marsh. But human actions can also go toward the sediment stabilization, and the final stretch of the Partido stream has experienced restoration actions as well. The old alluvial fan of the Partido stream is a complex terrain where also other three courses exchange their flows during floods. This document analyses four situations of the area studied: the first corresponds to the original state of the place (situation A); the second is the state created after the channel of the Partido stream was built in 1981 (situation B); the third is the state formed after some time passed and the geo-dynamism caused effect in the channelization (situation C); and the forth situation is the one created after the restoration in summer of 2006 of the hydraulic-sedimentary regime of the Partido stream with de Action number 3 of the Doñana 2005 Project. It has been researched the effects that the alteration of the morphology of the drainage system of the old alluvial fan of the Partido stream causes to the hydraulic parameters that trigger the torrential geo-dynamism. For that, the morphologic conditions of the four more representative situations were reproduced. Those situations experienced in the area in the last 30 years have conditioned the behaviour of torrential floods in that period. In this context, a hydrologic model with HEC-HMS and a 2D hydro-dynamic model with IBER have been set up. With IBER, eight scenes have been compared resulting from the impact of two representative floods from torrential events in the region against the morphologies considered. Also, the shear stress of the floods on the terrain has been studied, analysing separately the effect in the four drainage courses of the old alluvial fan and in the rest of its surfaces. The research carried out has allowed describing in minute detail the behavior of the local drainages of the old and complex alluvial fan that border the northwest part of the marsh of Doñana National Park, from the marsh of El Rocío to the gallega marsh. This will result in benefit for the management of Doñana National Park and its surroundings, and especially for the safety of the eastern limit of El Rocío village.

State of the Art and Future Trends in Grid Codes Applicable to Isolated Electrical Systems

Isolated electrical systems lack electrical interconnection to other networks and are usually placed in geographically isolated areas—mainly islands or locations in developing countries. Until recently, only diesel generators were able to assure a safe and reliable supply in exchange for very high costs for fuel transportation and system operation. Transmission system operators (TSOs) are increasingly seeking to replace traditional energy models based on large groups of conventional generation units with mixed solutions where diesel groups are held as backup generation and important advantages are provided by renewable energy sources. The grid codes determine the technical requirements to be fulfilled by the generators connected in any electrical network, but regulations applied to isolated grids are more demanding. In technical literature it is rather easy to find and compare grid codes for interconnected electrical systems. However, the existing literature is incomplete and sparse regarding isolated grids. This paper aims to review the current state of isolated systems and grid codes applicable to them, specifying points of comparison and defining the guidelines to be followed by the upcoming regulations.

State of the Art and Future Trends in Grid Codes Applicable to Isolated Electrical Systems

Electrical power systems are changing their traditional structure, which was based on a little number of large generating power plants placed at great distances from loads by new models that tend to split the big production nodes in many smaller ones. The set of small groups which are located close to consumers and provide safe and quality energy is called distributed generation (DG). The proximity of the sources to the loads reduces losses associated with transportation and increases overall system efficiency. DG also favors the inclusion of renewable energy sources in isolated electrical systems or remote microgrids, because they can be installed where the natural resource is located. In both cases, as weak grids unable to get help from other nearby networks, it is essential to ensure appropriate behavior of DG sources to guarantee power system safety and stability. The grid codes sets out the technical requirements to be fulfilled for the sources connected in these electrical networks. In technical literature it is rather easy to find and compare grid codes for interconnected electrical systems. However, the existing literature is incomplete and sparse regarding isolated electrical systems and this happens due to the difficulties inherent in the pursuit of codes. Some countries have developed their own legislation only for their island territory (as Spain or France), others apply the same set of rules as in mainland, another group of island countries have elaborated a complete grid code for all generating sources and some others lack specific regulation. This paper aims to make a complete review of the state of the art in grid codes applicable to isolated systems, setting the comparison between them and defining the guidelines predictably followed by the upcoming regulations in these particular systems.

Flood Hazard Analysis in the ”Caldera de Taburiente” National Park (La Palma, Canary Islands, Spain) using Dendrogeomorphology

Aplicación de técnicas dendroecológicas para el estudio de avenidas torrenciales.

O EFEITO DO CONTROLE RESPIRATÓRIO EM VARIÁVEIS ELETROFISIOLÓGICAS DA ATENÇÃO

A prática do ioga tem se tornado cada vez mais popular, não apenas pelos benefícios físicos, mas principalmente pelo bem-estar psicológico trazido pela sua prática. Um dos componentes do ioga é o Prãnãyama, ou controle da respiração. A atenção e a respiração são dois mecanismos fisiológicos e involuntários requeridos para a execução do Prãnãyama. O principal objetivo desse estudo foi verificar se variáveis contínuas do EEG (potência de diferentes faixas que o compõem) seriam moduladas pelo controle respiratório, comparando-se separadamente as duas fases do ciclo respiratório (inspiração e expiração), na situação de respiração espontânea e controlada. Fizeram parte do estudo 19 sujeitos (7 homens/12 mulheres, idade média de 36,89 e DP = ± 14,46) que foram convidados a participar da pesquisa nas dependências da Faculdade de Saúde da Universidade Metodista de São Paulo. Para o registro do eletroencefalograma foi utilizado um sistema de posicionamento de cinco eletrodos Ag AgCl (FPz, Fz, Cz, Pz e Oz) fixados a uma touca de posicionamento rápido (Quick-Cap, Neuromedical Supplies®), em sistema 10-20. Foram obtidos valores de máxima amplitude de potência (espectro de potência no domínio da frequência) nas frequências teta, alfa e beta e delta e calculada a razão teta/beta nas diferentes fases do ciclo respiratório (inspiração e expiração), separadamente, nas condições de respiração espontânea e de controle respiratório. Para o registro do ciclo respiratório, foi utilizada uma cinta de esforço respiratório M01 (Pletismógrafo). Os resultados mostram diferenças significativas entre as condições de respiração espontânea e de controle com valores das médias da razão teta/beta menores na respiração controlada do que na respiração espontânea e valores de média da potência alfa sempre maiores no controle respiratório. Diferenças significativas foram encontradas na comparação entre inspiração e expiração da respiração controlada com diminuição dos valores das médias da razão teta/beta na inspiração e aumento nos valores das médias da potência alfa, sobretudo na expiração. Os achados deste estudo trazem evidências de que o controle respiratório modula variáveis eletrofisiológicas relativas à atenção refletindo um estado de alerta, porém mais relaxado do que na situação de respiração espontânea.

O PSC E A NOÇÃO DE “FAMÍLIA TRADICIONAL” COMO IDENTIDADE PARTIDÁRIA E RELIGIOSA: ANÁLISE DO PROCESSO ELEITORAL DE 2014

A presente dissertação analisa como o Partido Social Cristão (PSC), ao longo do tempo, se apropriou da identidade religiosa de seus atores políticos que na sua maioria são membros da Frente Parlamentar Evangélica, os quais defendem no espaço público a “família tradicional”, em detrimento da pluralidade de arranjos familiares na contemporaneidade. Para explicitar o objeto - “família tradicional” e PSC -, foi necessário retroceder no tempo e investigar na historiografia os primórdios da inserção dos evangélicos na política brasileira. Em vista disso, analisamos a participação dos evangélicos nos respectivos períodos do Brasil: Colônia, Império e República. A dificuldade da entrada de evangélicos na política partidária, dentre outros fatores, se deve àinfluência do catolicismo no Estado. Assim sendo, averiguamos em todas as Constituições (1824, 1891, 1934, 1937, 1946, 1967, 1969 e 1988) o que a mesma diz no que tange a proibição e a liberdade religiosa no país. Logo, verificamos entre as Eras Vargas e República Populista, que ocorreu com intensidade a transição do apoliticismo para o politicismo entre os evangélicos brasileiros, porém, eles não recebiam o apoio formal de suas igrejas. Em seguida, a participação dos evangélicos na arena política durante a ditadura militar foi investigada com destaque para o posicionamento de vanguarda da IECLB, através do Manifesto de Curitiba e, também com a presença de parlamentares evangélicos no Congresso Nacional. A politização pentecostal é ressaltada em nosso trabalho, através do pioneirismo de Manoel de Mello e, depois na Redemocratização quando as instituições evangélicas se organizaram para eleger seus candidatos à Assembleia Nacional Constituinte. E, com o fim do regime militar, o PSC surge como partido “nanico”, contudo, deixa o anonimato e ganha visibilidade midiática quando o pastor e deputado, Marco Feliciano, assume a presidência da Comissão de Direitos Humanos e Minorias, em 2013. Esse é o pano de fundo histórico que projetou o PSC e seus atores no pleito de 2014 com o mote “família tradicional”.

O AGENDAMENTO DE TELEJORNAIS BRASILEIROS EM SITES NOTICIOSOS DE CONTEÚDO COLABORATIVO

The thesis investigates if with the free news production, people who post information on collaborative content sites, known as interacting, tend to reproduce information that was scheduled for Tv news. This study is a comparison of the collaborative content vehicles Vc reporter, Vc no G1 and Eu reporter with TV news SBT Brasil, Jornal Nacional, Jornal da Record and Jornal da Band. We sought to determine whether those newscasts guide the collaborative platforms. The hypothesis assumes that Brazilian TV news have been building over time a credible relationship with the viewer, so it is possible to think that the interacting use the same criteria for selecting the broadcasts and reproduce similar information in collaborative content sites. The method used was content analysis, based on the study of Laurence Bardin and the type of research used was quantitative. This research concluded that, within a small portion of the universe surveyed, there are schedules of television news across the collaborative content.

Solid-state synthesis and mechanical unfolding of polymers of T4 lysozyme

Recent advances in single molecule manipulation methods offer a novel approach to investigating the protein folding problem. These studies usually are done on molecules that are naturally organized as linear arrays of globular domains. To extend these techniques to study proteins that normally exist as monomers, we have developed a method of synthesizing polymers of protein molecules in the solid state. By introducing cysteines at locations where bacteriophage T4 lysozyme molecules contact each other in a crystal and taking advantage of the alignment provided by the lattice, we have obtained polymers of defined polarity up to 25 molecules long that retain enzymatic activity. These polymers then were manipulated mechanically by using a modified scanning force microscope to characterize the force-induced reversible unfolding of the individual lysozyme molecules. This approach should be general and adaptable to many other proteins with known crystal structures. For T4 lysozyme, the force required to unfold the monomers was 64 ± 16 pN at the pulling speed used. Refolding occurred within 1 sec of relaxation with an efficiency close to 100%. Analysis of the force versus extension curves suggests that the mechanical unfolding transition follows a two-state model. The unfolding forces determined in 1 M guanidine hydrochloride indicate that in these conditions the activation barrier for unfolding is reduced by 2 kcal/mol.

Noxious Weed Management: A Review of Herbicide Use at Colorado State Parks

Weed control in recreation areas is a complex public land management issue. Colorado State Parks are managed for both recreation and conservation, which often conflict. Noxious weeds affect both recreation and conservation efforts, and Parks often use herbicides to control these weeds. While herbicides are effective, they can be harmful to the environment and human health. Herbicide use at State Parks was reviewed to determine if chemical control is effective, safe, and efficient. The results revealed that many Parks are not using effective herbicides to treat noxious weeds and that some weed management plans lack pertinent information on chemical control. The results and recommendations provided can be used to improve the success of noxious weed control and create healthier Parks.

Charles River Basin park (proposed), Boston and Cambridge, Massachusetts, 1880 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Proposed Charles River park, engraved for C. Davenport. It was published ca. 1880. Scale [ca. 1:21,100]. Covers the Charles River Basin and surrounding portions of Boston and Cambridge, Massachusetts. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, selected public buildings, parks, and more. Includes table of areas and insets: View from the foot of Mt. Vernon St. -- [Map of Boston and vicinity]. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.