Diagnóstico de estruturas de madeira em serviço num palacete do século XIX

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Edificações

Theory and phenomenology of two-higgs-doublet models

We discuss theoretical and phenomenological aspects of two-Higgs-doublet extensions of the Standard Model. In general, these extensions have scalar mediated flavour changing neutral currents which are strongly constrained by experiment. Various strategies are discussed to control these flavour changing scalar currents and their phenomenological consequences are analysed. In particular, scenarios with natural flavour conservation are investigated, including the so-called type I and type II models as well as lepton-specific and inert models. Type III models are then discussed, where scalar flavour changing neutral currents are present at tree level, but are suppressed by either a specific ansatz for the Yukawa couplings or by the introduction of family symmetries leading to a natural suppression mechanism. We also consider the phenomenology of charged scalars in these models. Next we turn to the role of symmetries in the scalar sector. We discuss the six symmetry-constrained scalar potentials and their extension into the fermion sector. The vacuum structure of the scalar potential is analysed, including a study of the vacuum stability conditions on the potential and the renormalization-group improvement of these conditions is also presented. The stability of the tree level minimum of the scalar potential in connection with electric charge conservation and its behaviour under CP is analysed. The question of CP violation is addressed in detail, including the cases of explicit CP violation and spontaneous CP violation. We present a detailed study of weak basis invariants which are odd under CP. These invariants allow for the possibility of studying the CP properties of any two-Higgs-doublet model in an arbitrary Higgs basis. A careful study of spontaneous CP violation is presented, including an analysis of the conditions which have to be satisfied in order for a vacuum to violate CP. We present minimal models of CP violation where the vacuum phase is sufficient to generate a complex CKM matrix, which is at present a requirement for any realistic model of spontaneous CP violation.

Human and climatic change impact modelling on the habitat suitability for the chimpanzee (Pan troglodytes ellioti) – Case study: The proposed Mount Cameroon National Park

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

Historically accurate reconstructions and characterisation of chrome yellow pigments

Dissertation presented at the Faculty of Sciences and Technology of the New University of Lisbon in fulfillment of the requirements for the Master degree in Conservation Science

Morbidity and survival in advanced AIDS in Rio de Janeiro, Brazil

Opportunistic diseases (OD) are the most common cause of death in AIDS patients. To access the incidence of OD and survival in advanced immunodeficiency, we included 79 patients with AIDS treated at Hospital Evandro Chagas (FIOCRUZ) from September 1997 to December 1999 with at least one CD4 count <=100 cells/mm³. The incidence of OD was analyzed by Poisson's regression, and survival by Kaplan Meier and Cox analysis, considering a retrospective (before CD4 <=100 cells/mm³) and a prospective (after CD4 <=100 cells/mm³) period, and controlling for demographic, clinical and laboratory characteristics. The confidence interval estipulated was 95%. Mean follow-up period was 733 days (CI = 683-782). During the study 9 (11.4%) patients died. Survival from AIDS diagnosis was a mean of 2589 days (CI = 2363-2816) and from the date of the CD4 count CD4 <=100 cells/mm³ was a mean of 1376 (CI = 1181-1572) days. Incidence of OD was 0.51 pp/y before CD4 <= 100 cells/mm³ and 0.29 pp/y after CD4 <= 100 cells/mm³. A lower number of ODs before CD4 < 100 cells/mm³ was associated with lower incidence rates after CD4 <= 100 cells/mm³. AIDS diagnosis based on CD4+ counts <= 200 cells/mm³ was associated with lower incidence rates after CD4 <= 100 cells/mm³. Baseline CD4 counts above 50 cells/mm³ (HR = 0.13) and restoration of baseline CD4+ counts above 100 cells/mm³ (HR = 0.16) were associated with a lower risk of death. Controling both variables, only restoration of baseline counts was statistically significant (HR = 0.22, p = 0.04). We found a very low incidence of OD and long survival after CD4 < 100 cells/mm³. Survival was significantly associated with restoration of baseline CD4 counts above 100 cells/mm³.

Rede de Calor – Uma Solução a Biomassa para um Complexo de Hóteis

O recurso às energias renováveis é na actualidade um tema que atinge um grau de importância primordial face á crescente preocupação com o meio ambiente e o impacto negativo, que a produção de energia com base em combustíveis fósseis tem. Esta importância aliada a uma tendência cada vez maior para a criação de soluções de produção sustentável de energia, tem obrigado ao desenvolvimento desta vertente do sector energético e ao estudo e consequentemente implementação de soluções integradas que permitam uma economia competitiva. Os hotéis, sendo estabelecimentos comerciais que desenvolvem uma actividade que envolve, na generalidade, um nível de consumo energético considerável para garantir os seus serviços básicos de acomodação e lazer, tornam-se por excelência alvos primordiais no que concerne ao seu elevado potencial de poupança de energia. O ramo da hotelaria, dada a sua especificidade e a natureza dos edifícios que comporta, torna-os em excelentes candidatos para análise e optimização energética, e como tal um alvo de negócio para as empresas de comercialização de poupanças energéticas. As empresas dedicadas aos serviços de energia são conhecidas por ESCO (Energy Service Company ou Energy Savings Company). A sua actividade tem por base apresentar soluções de energia, nomeadamente a implementação de projectos de poupança energética que podem englobar produção, conservação e fornecimento de energia, bem como gestão de risco associada. O objectivo principal é apresentar soluções de optimização e eficiência energética levando á sua implementação em casos reais de exploração em edifícios ou sectores específicos, rentabilizando o investimento e partilhando o lucro dessa rentabilização com os clientes. No caso específico dos hotéis, mais concretamente um complexo de hotéis, como o estudado neste trabalho, esta análise pretende elaborar uma caracterização das necessidades energéticas do sector e apresentar um conjunto de soluções energéticas adequadas à realidade hoteleira. É também objecto de análise, toda a aproximação de um modelo de negócio energético a explorar por uma ESCO. O presente trabalho, realizado no âmbito da parceria entre a Gebio e a Confraria do Bom Jesus, tem por objectivo demonstrar as bases do contracto de performance entre uma empresa ESCO (Gebio – empresa concessionária do projecto) e um complexo de hotéis (constituído pelo Hotel do Lago, Hotel do Parque e Hotel do Templo), com vista a optimizar os consumos energéticos para a produção de energia térmica capaz de corresponder às necessidades do complexo. Foi desenvolvido um estudo completo das necessidades térmicas do complexo, com vista a projectar uma solução integrada de produção de energia térmica, com recurso a uma caldeira de biomassa, para os hotéis. Foi realizado um levantamento extensivo dos consumos e custos energético do complexo, nomeadamente para as águas quentes sanitárias. Desta análise obtiveram-se os custos reais do sistema e com os mesmos foi possível, numa primeira fase, elaborar os diversos projectos, hidráulico, eléctricos e civil, de forma a se definir a solução base e quais os orçamentos previstos para a instalação de um sistema de produção a biomassa, e numa segunda fase foi estudada a viabilidade da assinatura de um contracto de performance entre a ESCO e o complexo de hotéis.

Re-Use Assessment of Thermoset Composite Wastes as Aggregate and Filler Replacement for Concrete-Polymer Composite Materials: A case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Reabilitação de um Edifício de Serviços no Porto para função de Hotel

Este relatório de estágio aborda o tema da reabilitação, referindo-se a uma intervenção da especialidade e também construção de raíz, de um Hotel situado na rua do Heroísmo no Porto. Portugal possui um edificado que tem vindo a degradar-se ao longo dos últimos anos, devido essencialmente à falta de operações periódicas de manutenção, conservação e reabilitação. Esta degradação resulta não só do mau estado de conservação generalizado dos edifícios, mas também da inexistência de infra-estruturas urbanísticas em devido funcionamento. Tal conjunto de situações, leva a um movimento migratório dos habitantes das cidades para as respetivas periferias. A cidade do Porto não é uma exceção, estando a necessitar de um forte esforço de reabilitação para inverter esta situação. Ao longo dos últimos anos têm vindo a ser criados diversos apoios financeiros, nacionais e europeus, com o objetivo de ajudar as operações de reabilitação. Mais recentemente foi possibilitada a criação de Sociedades de Reabilitação Urbana (SRU), cujo objetivo é o de promover e orientar todo o processo de reabilitação, de forma a regula-lo nos centros das cidades. No entanto a intervenção de reabilitação de um edifício é uma operação complexa, com diversas especificidades e com inúmeras condicionantes devido às pré-existências próprias de cada edifício.

Lime mortars with rice husk ash for ancient masonry

HMC08 - 1st Historical Mortars Conference: Characterization, Diagnosis, Conservation, Repair and Compatibility, LNEC, Lisbon, 24-26 September 2008

Long-term characterization of air lime mortars with ceramic waste

Due to their exposure to environmental conditions, outer coatings composed by render and painting system are usually the first construction elements to deteriorate and require intervention. A correct conservation and rehabilitation of these materials is fundamental once they provide protection to other façade materials. It is known that old mortar renders were essentially air lime based mortars. To maintain the integrity of the whole wall-render elements, the image of the building and to avoid accelerated degradation, conservation and rehabilitation must be implemented with compatible mortars. As that, lime based mortars would be preferable. It was also common, in ancient renders, the incorporation of ceramic residues, which is, nowadays, an abundant material, especially in Central Region of Portugal. The reuse of these materials has great relevance once their landfilling causes serious environmental issues. In an attempt to combine the environmental and technical advantages of the use of ceramic waste in mortars’ production for rehabilitation purposes, a research has been developed at the University of Coimbra, in cooperation with Nova University of Lisbon, on the long term behaviour of air lime mortars with ceramic residues. In this paper the most significant up to one year results of an experimental campaign with air lime mortars with 1:3 and 1:2 volumetric proportions and ceramic residues are presented.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.

Assessment and management of the geomorphological heritage of Monte Pindo (NW Spain): a landscape as a symbol of identity

This study focuses on the granite mountain known as Monte Pindo (627 m above sea level) in the Autonomous Community of Galicia (NW Spain). This territory is included in the area classified as “Costa da Morte” in the “Politica de Ordenación Litoral” (POL) (Coastal Planning Policy) for the region of Galicia. This coastal unit, located between “Rías Baixas” and “Cape Fisterra” has great potential for demonstrating geological processes and its geomorphological heritage is characterized by a high degree of geodiversity of granite landforms. The main objective of our work is to assess the geomorphological heritage of the site, thus revealing its wide geodiversity. We shall analyze and highlight: its scientific value, developing an inventory of granite landforms; its educational valuel and its geotouristic potential. It must be ensured that the Administration understands that natural diversity is composed of both geodiversity and biodiversity. Only then will the sustainable management of Monte Pindo become possible by integrating natural and cultural heritage values. The goal is to ensure that Monte Pindo and its immediate surroundings become a geopark with the aim of promoting local development projects based on the conservation and valorization of its geological heritage.

Predicting the distribution of forest tree species using topographic variables and vegetation index in eastern Acre, Brazil

Species distribution modeling has relevant implications for the studies of biodiversity, decision making about conservation and knowledge about ecological requirements of the species. The aim of this study was to evaluate if the use of forest inventories can improve the estimation of occurrence probability, identify the limits of the potential distribution and habitat preference of a group of timber tree species. The environmental predictor variables were: elevation, slope, aspect, normalized difference vegetation index (NDVI) and height above the nearest drainage (HAND). To estimate the distribution of species we used the maximum entropy method (Maxent). In comparison with a random distribution, using topographic variables and vegetation index as features, the Maxent method predicted with an average accuracy of 86% the geographical distribution of studied species. The altitude and NDVI were the most important variables. There were limitations to the interpolation of the models for non-sampled locations and that are outside of the elevation gradient associated with the occurrence data in approximately 7% of the basin area. Ceiba pentandra (samaúma), Castilla ulei (caucho) and Hura crepitans (assacu) is more likely to occur in nearby water course areas. Clarisia racemosa (guariúba), Amburana acreana (cerejeira), Aspidosperma macrocarpon (pereiro), Apuleia leiocarpa (cumaru cetim), Aspidosperma parvifolium (amarelão) and Astronium lecointei (aroeira) can also occur in upland forest and well drained soils. This modeling approach has potential for application on other tropical species still less studied, especially those that are under pressure from logging.

Pharmacological evaluation of plant extracts from Chapada Diamantina (Bahia, Brazil): Focus on antioxidant and cytotoxic properties

Tese de Doutoramento em Biologia de Plantas MAP - Bioplant

Analysis of energy management in GMIT

Energy management is the process of monitoring, controlling and conserving energy in a building or organisation. The main reasons for this are for cost purposes and benefit to the environment. Through various techniques and solutions for lighting, heating, office equipment, the building fabric etc along with a change in people’s attitudes there can be a substantial saving in the amount spent on energy. A good example o f energy waste in GMIT is the lighting situation in the library. All the lights are switched on all day on even in places where that is adequate daylighting, which is a big waste o f energy. Also the lights for book shelves are left on. Surely all these books won’t be searched for all at the one time. It would make much more sense to have local switches that the users can control when they are searching for a particular book. Heating controls for the older parts o f the college are badly needed. A room like 834 needs a TRV to prevent it from overheating as temperatures often reach the high twenties due to the heat from the radiators, computers, solar gains and heat from users o f the room. Also in the old part o f the college it is missing vital insulation, along with not being air tight due to the era when it was built. Pumped bonded bead insulation and sealant around services and gaps can greatly improve the thermal performance o f the building and help achieve a higher BER cert. GMIT should also look at the possibility o f installing a CHP plant to meet the base heating loads. It would meet the requirement o f running 4500 hours a year and would receive some financial support from the Accelerated Capital Allowance. I f people’s attitudes are changed through energy awareness campaigns and a few changes made for more energy efficient equipment, substantial savings can be made in the energy expenditure.