Medidas de intervención para promoción de conductas saludables y prevención de riesgos laborales relacionados con accidentalidad y enfermedad laboral en trabajadores de minas de Carbón

Colombia en su legislación normatiza el sector de la minería de carbón, sin embargo se considera que las estrategias no han sido suficientes para la identificación, prevención y control de la accidentalidad y enfermedad laboral. Durante el año 2013 el índice de fatalidad fue de 1,59. Estadísticas del año 2004 evidencian que las neumoconiosis fueron las mayores causas de invalidez de origen profesional. Objetivo: Categorizar actividades de intervención en promoción y prevención de accidentalidad y enfermedad laboral en trabajadores de la minería de carbón. Metodología: Se realizó una revisión de literatura sobre minería de carbón y salud la cual fue obtenida de las bases de datos PUBMED, Sciendirect, VHL, SINAB por literatura publicada sin límites de año, en idioma inglés, español o portugués. Para la búsqueda se utilizaron términos en lenguaje controlado (términos MESH), revisión por pares de títulos y resúmenes. Las publicaciones fueron seleccionadas para revisión de texto completo bajo criterios de inclusión y exclusión. Los códigos contemplados para esta revisión fueron: a) país donde la intervención se llevó a cabo, b) salud ocupacional, c) prevención de accidentalidad, d) programas de promoción, e) tecnologías, f) resultados obtenidos. Resultados: Del total de 2500 artículos seleccionados por los autores principales se realizó la revisión de los primeros 300 artículos, 32 hacen referencia al tema de salud ocupacional y minería de carbón, 10 contienen intervenciones consideradas de relevancia para esta revisión bibliográfica. Se presentan intervenciones estadísticamente significativas (p<0.05) y que han demostrado ser de impacto positivo en la minería de carbón en promoción y prevención de accidentalidad y enfermedad ocupacional. Conclusiones: Se identificaron las siguientes cuatro tipos de intervención: 1) las de carácter educativo que hacen referencia a las capacitaciones participativas, el entrenamiento por medio de “degraded image”, la realización de gestión de autocontrol y retroalimentación para el uso de elementos de protección personal (EPP), la aplicación del Modelo de Proceso Paralelo Extendido; 2) intervenciones preventivas como la medición de alcoholimetría antes del turno, la presencia de personal de enfermería en minas de carbón y el reconocimiento de los predictores de la enfermedad para optimizar la prevención primaria; 3)intervenciones de vigilancia como la promovida en la metodología Estadísticas Europeas de Accidentes de Trabajo (EEAT) para la investigación de los accidentes de trabajo, la aplicación de las recomendaciones de la Organización Mundial de la Salud (OMS) para la detección de la neumoconiosis y 4) De carácter tecnológico consistente en la intervención de tareas a partir de los resultados de la aplicación del software desarrollado por el Instituto Nacional para la Seguridad y Salud Ocupacional (NIOSH). Estas intervenciones han demostrado ser eficaces en la promoción y prevención de accidentalidad y enfermedad ocupacional por lo cual se recomienda su aplicación en Colombia posterior al análisis de costo-efectividad.

Relación entre el desarrollo de sistemas de control de gestión y los recursos y capacidades caso : Teleperformance Colombia

Siguiendo un marco teórico integrado por varios autores entorno a los sistemas de control de gestión a lo largo de varias décadas, este trabajo pretende estudiar y contrastar la relación entre el desarrollo de dichos sistemas y los recursos y capacidades. Para tal fin, se desarrolló un estudio de caso en Teleperformance Colombia (TC), una empresa dedicada a prestación de servicio de tercerización de procesos o business process outsourcing. En el estudio se establecieron dos variables para evaluar el desarrollo de sistema de control de gestión: el diseño y el uso. A su vez, para cada uno de ellos, se definieron los indicadores y preguntas que permitieran realizar la observación y posterior análisis. De igual manera, se seleccionaron los recursos y capacidades más importantes para el desarrollo del negocio: innovación, aprendizaje organizacional y capital humano. Sobre estos se validó la existencia de relación con el SCG implementado en TC. La información obtenida fue analizada y contrastada a través de pruebas estadísticas ampliamente utilizadas en este tipo de estudios en las ciencias sociales. Finalmente, se analizaron seis posibles relaciones de las cuales, solamente se ratificó el relacionamiento positivo entre uso de sistema de control gestión y el recurso y capacidad capital humano. El resto de relacionamientos, refutaron los planteamientos teóricos que establecían cierta influencia de los sistemas de control de gestión sobre recursos y capacidades de innovación y aprendizaje organizacional.

Controlling regional monopolies in the natural gas industry: the role of transport capacity

This paper analyzes some optimal fiscal, pricing, and capacity investment policies for controlling regional monopoly power in the natural gas industry. By letting the set of control instruments available to the social planner vary, we provide a characterization of the technological and demand conditions under which “excess” capacity in the transport network arises in response to the loss of the two other control instruments, namely, transfers and pricing. Hence, the analysis yields some insights on an economy’s incentives to invest in infrastructures for the purpose of integrating geographically isolated markets.

Automatic generation of active coordinates for quantum dynamics calculations: application to the dynamics of benzene photochemistry

A new practical method to generate a subspace of active coordinates for quantum dynamics calculations is presented. These reduced coordinates are obtained as the normal modes of an analytical quadratic representation of the energy difference between excited and ground states within the complete active space self-consistent field method. At the Franck-Condon point, the largest negative eigenvalues of this Hessian correspond to the photoactive modes: those that reduce the energy difference and lead to the conical intersection; eigenvalues close to 0 correspond to bath modes, while modes with large positive eigenvalues are photoinactive vibrations, which increase the energy difference. The efficacy of quantum dynamics run in the subspace of the photoactive modes is illustrated with the photochemistry of benzene, where theoretical simulations are designed to assist optimal control experiments

Control de la producció d'una empresa farmacèutica

Estudi de la implantació del control automàtic en la producció d'una indústria farmacèutica, concretament en sis línies de màquines. A part de portar un control es pretén millorar la producció i a la vegada detectar qualsevol error o anomalia que es produeixi en aquestes màquines

Customer satisfaction in the banking industry: a comparative study of Ghana and Spain

La satisfacció és una preocupació crucial pels clients i per les organitzacions, incloent els bancs. L'estudi examina la satisfacció global dels clients dels bancs a Ghana i Espanya. Així s'analitzen aspectes com la relació entre satisfacció global i les dimensions de qualitat dels serveis bancari, així com les pròpies dimensions principals de la qualitat d'aquests serveis. Finalment, les percepcions sobre aquestes dimensions son comparades entre els bancs de Ghana i Espanya. S'han analitzat els clients de 819 bancs de Ghana i Espanya, els resultats van mostrar que els clients espanyols estaven més descontents respecte les dimensions tangibles i empatia metre que els clients de Ghana puntuaven pitjar la dimensió conveniència. En general, els clients de Ghana estaven força més descontents amb els serveis bancaris que els d'Espanya. La fiabilitat, l'empatia i la conveniència son els predictors de satisfacció global en Ghana, mentres que la fiabilitat és la única dimensió que explica la satisfacció global a Espanya.

Els valors límit d'exposició professional i límits biològics per a agents químics en l'àmbit de treball, mesura i control. Evolució de la normativa sobre el plom i la seva incidència sobre els accidents laborals i malalties professionals en la indústria ceràmica

L'objectiu d'aquesta tesi és l'estudi dels valors límit d'exposició professional previstos en la normativa actual com a valors de referència per a l'avaluació i control dels riscos que comporta l'exposició a agents químics presents en el lloc de treball, fonamentalment per inhalació, per protegir la salut dels treballadors. No es pretén realitzar ni un estudi epidemiològic ni un estudi d'higiene, només s'utilitzen els valors d'exposició professional per analitzar el compliment de la normativa sobre la presència de plom en l'ambient de treball, i comprovar si el compliment de la normativa comporta la millora de la salut dels treballadors en funció de la millora de les concentracions de valors ambientals o biològics de l'exposició dels treballadors. La Directiva 98/24/CE deroga les Directives 80/1107/CEE sobre la protecció dels treballadors contra els riscos relacionats amb l'exposició a agents químics, físics i biològics durant el treball, i la Directiva 82/605/CEE, sobre la protecció dels treballadors contra riscos relacionats amb una exposició al plom metàl·lic i als seus compostos iònics durant el treball. S'analitza l'evolució de la normativa sobre la presència d'agents químics en l'ambient de treball, i en concret el plom, i la seva incidència en els accidents laborals i malalties professionals, i el compliment de la normativa al final d'un cicle marcat per l'entrada en vigor de la Directiva 98/24/CE. Per realitzar l'anàlisi anteriorment esmentada s'estudia la indústria ceràmica de les comarques gironines, de la construcció, de l'alimentació i decorativa, a través de les mesures de plom en l'ambient laboral i les mesures de plom en sang dels treballadors d'aquesta indústria des de 1991 a 1996.

SBR technology for wastewater treatment: suitable operational conditions for a nutrient removal

Actualment, la legislació ambiental ha esdevingut més restrictiva pel que fa a la descàrrega d'aigües residuals amb nutrients, especialment en les anomenades àrees sensibles o zones vulnerables. Arran d'aquest fet, s'ha estimulat el coneixement, desenvolupament i millora dels processos d'eliminació de nutrients. El Reactor Discontinu Seqüencial (RDS) o Sequencing Batch Reactor (SBR) en anglès, és un sistema de tractament de fangs actius que opera mitjançant un procediment d'omplerta-buidat. En aquest tipus de reactors, l'aigua residual és addicionada en un sol reactor que treballa per càrregues repetint un cicle (seqüència) al llarg del temps. Una de les característiques dels SBR és que totes les diferents operacions (omplerta, reacció, sedimentació i buidat) es donen en un mateix reactor. La tecnologia SBR no és nova d'ara. El fet, és que va aparèixer abans que els sistema de tractament continu de fangs actius. El precursor dels SBR va ser un sistema d'omplerta-buidat que operava en discontinu. Entre els anys 1914 i 1920, varen sorgir certes dificultats moltes d'elles a nivell d'operació (vàlvules, canvis el cabal d'un reactor a un altre, elevat temps d'atenció per l'operari...) per aquests reactors. Però no va ser fins a finals de la dècada dels '50 principis del '60, amb el desenvolupament de nous equipaments i noves tecnologies, quan va tornar a ressorgir l'interès pels SBRs. Importants millores en el camp del subministrament d'aire (vàlvules motoritzades o d'acció pneumàtica) i en el de control (sondes de nivell, mesuradors de cabal, temporitzadors automàtics, microprocessadors) han permès que avui en dia els SBRs competeixin amb els sistemes convencional de fangs actius. L'objectiu de la present tesi és la identificació de les condicions d'operació adequades per un cicle segons el tipus d'aigua residual a l'entrada, les necessitats del tractament i la qualitat desitjada de la sortida utilitzant la tecnologia SBR. Aquestes tres característiques, l'aigua a tractar, les necessitats del tractament i la qualitat final desitjada determinen en gran mesura el tractament a realitzar. Així doncs, per tal d'adequar el tractament a cada tipus d'aigua residual i les seves necessitats, han estat estudiats diferents estratègies d'alimentació. El seguiment del procés es realitza mitjançant mesures on-line de pH, OD i RedOx, els canvis de les quals donen informació sobre l'estat del procés. Alhora un altre paràmetre que es pot calcular a partir de l'oxigen dissolt és la OUR que és una dada complementària als paràmetres esmentats. S'han avaluat les condicions d'operació per eliminar nitrogen d'una aigua residual sintètica utilitzant una estratègia d'alimentació esglaonada, a través de l'estudi de l'efecte del nombre d'alimentacions, la definició de la llargada i el número de fases per cicle, i la identificació dels punts crítics seguint les sondes de pH, OD i RedOx. S'ha aplicat l'estratègia d'alimentació esglaonada a dues aigües residuals diferents: una procedent d'una indústria tèxtil i l'altra, dels lixiviats d'un abocador. En ambdues aigües residuals es va estudiar l'eficiència del procés a partir de les condicions d'operació i de la velocitat del consum d'oxigen. Mentre que en l'aigua residual tèxtil el principal objectiu era eliminar matèria orgànica, en l'aigua procedent dels lixiviats d'abocador era eliminar matèria orgànica i nitrogen. S'han avaluat les condicions d'operació per eliminar nitrogen i fòsfor d'una aigua residual urbana utilitzant una estratègia d'alimentació esglaonada, a través de la definició del número i la llargada de les fases per cicle, i la identificació dels punts crítics seguint les sondes de pH, OD i RedOx. S'ha analitzat la influència del pH i la font de carboni per tal d'eliminar fòsfor d'una aigua sintètica a partir de l'estudi de l'increment de pH a dos reactors amb diferents fonts de carboni i l'estudi de l'efecte de canviar la font de carboni. Tal i com es pot veure al llarg de la tesi, on s'han tractat diferents aigües residuals per a diferents necessitats, un dels avantatges més importants d'un SBR és la seva flexibilitat.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

Collaboration between infection control and occupational health in three continents: a success story with international impact

Globalization has been accompanied by the rapid spread of infectious diseases, and further strain on working conditions for health workers globally. Post-SARS, Canadian occupational health and infection control researchers got together to study how to better protect health workers, and found that training was indeed perceived as key to a positive safety culture. This led to developing information and communication technology (ICT) tools. The research conducted also showed the need for better workplace inspections, so a workplace audit tool was also developed to supplement worker questionnaires and the ICT. When invited to join Ecuadorean colleagues to promote occupational health and infection control, these tools were collectively adapted and improved, including face-to-face as well as on-line problem-based learning scenarios. The South African government then invited the team to work with local colleagues to improve occupational health and infection control, resulting in an improved web-based health information system to track incidents, exposures, and occupational injury and diseases. As the H1N1 pandemic struck, the online infection control course was adapted and translated into Spanish, as was a novel skill-building learning tool that permits health workers to practice selecting personal protective equipment. This tool was originally developed in collaboration with the countries from the Caribbean region and the Pan American Health Organization (PAHO). Research from these experiences led to strengthened focus on building capacity of health and safety committees, and new modules are thus being created, informed by that work. The products developed have been widely heralded as innovative and interactive, leading to their inclusion into “toolkits” used internationally. The tools used in Canada were substantially improved from the collaborative adaptation process for South and Central America and South Africa. This international collaboration between occupational health and infection control researchers led to the improvement of the research framework and development of tools, guidelines and information systems. Furthermore, the research and knowledge-transfer experience highlighted the value of partnership amongst Northern and Southern researchers in terms of sharing resources, experiences and knowledge.

Switching curve control of functional electrical stimulation assisted rowing exercise in paraplegia

An indoor rowing machine has been modified for functional electrical stimulation (FES) assisted rowing exercise in paraplegia. To perform the rowing manoeuvre successfully, however, the voluntarily controlled upper body movements must be co-ordinated with the movements of the electrically stimulated paralysed legs. To achieve such co-ordination, an automatic FES controller was developed that employs two levels of hierarchy. At the upper level, a finite state controller identifies the state or phase of the rowing cycle and activates the appropriate lower-level controller, in which electrical stimulation to the paralysed leg muscles is applied with reference to switching curves representing the desired seat velocity as a function of the seat position. In a pilot study, the hierarchical control of FES rowing was shown to be intuitive, reliable and easy to use. Compared with open-loop control of stimulation, all three variants of the closed-loop switching curve controllers used less muscle stimulation per rowing cycle (73% of the open-loop control on average). Further, the closed-loop controller that used switching curves derived from normal rowing kinematics used the lowest muscle stimulation (65% of the open-loop control) and was the most convenient to use for the client.

Automatic nonlinear predictive model-construction algorithm using forward regression and the PRESS statistic

An automatic nonlinear predictive model-construction algorithm is introduced based on forward regression and the predicted-residual-sums-of-squares (PRESS) statistic. The proposed algorithm is based on the fundamental concept of evaluating a model's generalisation capability through crossvalidation. This is achieved by using the PRESS statistic as a cost function to optimise model structure. In particular, the proposed algorithm is developed with the aim of achieving computational efficiency, such that the computational effort, which would usually be extensive in the computation of the PRESS statistic, is reduced or minimised. The computation of PRESS is simplified by avoiding a matrix inversion through the use of the orthogonalisation procedure inherent in forward regression, and is further reduced significantly by the introduction of a forward-recursive formula. Based on the properties of the PRESS statistic, the proposed algorithm can achieve a fully automated procedure without resort to any other validation data set for iterative model evaluation. Numerical examples are used to demonstrate the efficacy of the algorithm.

Intact imitation of emotional facial actions in autism spectrum conditions.

It has been proposed that there is a core impairment in autism spectrum conditions (ASC) to the mirror neuron system (MNS): If observed actions cannot be mapped onto the motor commands required for performance, higher order sociocognitive functions that involve understanding another person's perspective, such as theory of mind, may be impaired. However, evidence of MNS impairment in ASC is mixed. The present study used an 'automatic imitation' paradigm to assess MNS functioning in adults with ASC and matched controls, when observing emotional facial actions. Participants performed a pre-specified angry or surprised facial action in response to observed angry or surprised facial actions, and the speed of their action was measured with motion tracking equipment. Both the ASC and control groups demonstrated automatic imitation of the facial actions, such that responding was faster when they acted with the same emotional expression that they had observed. There was no difference between the two groups in the magnitude of the effect. These findings suggest that previous apparent demonstrations of impairments to the MNS in ASC may be driven by a lack of visual attention to the stimuli or motor sequencing impairments, and therefore that there is, in fact, no MNS impairment in ASC. We discuss these findings with reference to the literature on MNS functioning and imitation in ASC, as well as theories of the role of the MNS in sociocognitive functioning in typical development.

Using an additive to control the electrospinning of fibres of poly(epsilon-caprolactone)

Electrospinning is a route to polymer fibres with diameters considerably smaller than available from most fibre-producing techniques. We explore the use of a low molecular weight compound as an effective control additive during the electrospinning of poly(epsilon-caprolactone). This approach extends the control variables for the electrospinning of nanoscale fibres from the more usual ones such as the polymer molecular weight, solvent and concentration. We show that through the use of dual solvent systems, we can alter the impact of the additive on the electrospinning process so that finer as well as thicker fibres can be prepared under otherwise identical conditions. As well as the size of the fibres and the number of beads, the use of the additive allows us to alter the level of crystallinity as well as the level of preferred orientation of the poly(epsilon-caprolactone) crystals. This approach, involving the use of a dual solvent and a low molar mass compound, offers considerable potential for application to other polymer systems. (C) 2010 Society of Chemical Industry