Electrocatalytic reduction of 1,2-diiodoethane by anions of supramolecular complex of (beta-CD)(2)/C-60 in DMF solution

The homogeneous electrocatalytic reduction of 1,2-diiodoethane by anions of the supramolecular complex of (beta-CD)(2)/C-60 in DMF solution is reported. The results show that the trianion of (beta-CD)(2)/C-60 exhibits electrocatalytic behavior towards the reduction of 1,2-diiodoethane, whereas the diani on is unable to reduce the diiodoethane. The second-order catalytic rate constant in DMF solution was determined to be 3.1 x 10(5) M-1 s(-1) by analysis of voltammetric responses under pseudo-first-order conditions with respect to (beta-CD)(2)/C-60. The results suggest that the host beta-cyclodextrin molecules have little effect on the electrocatalytic ability of the encapsulated C-60 toward organic halides.

Crystallization and phase behavior of crystalline syndiotactic 1,2-polybutadiene/isotactic polypropylene blends in solution-cast thin films

Crystallization and phase behavior in solution-cast thin films of crystalline syndiotactic 1,2-polybutadiene (s-1,2-PB) and isotactic polypropylene (i-PP) blends have been investigated by transmission electron microscopy (TEM), atomic force microscopy (AFM) and field-emission scanning electron microscopy (FESEM) techniques. Thin films of pure s-1,2-PB consist of parallel lamellae with the c-axis perpendicular to the film plane and the lateral scale in micrometer size, while those of i-PP are composed of cross-hatched and single-crystal-like lamellae. For the blends, TEM and AFM observations show that with addition of i-PP, the s-1,2-PB long lamellae become bended and i-PP itself tends to form dispersed convex regions oil a continuous s-1,2-PB phase even when i-PP is the predominant component, which indicates a strong phase separation between the two polymers during film formation. FESEM micrographs of both lower and upper surfaces of the films reveal that the s-1,2-PB lamellae pass through i-PPconvex regions from the bottom, i.e. the dispersed i-PP regions lie on the continuous s-1,2-PB phase. The structural development is attributed to an interplay of crystallization and phase separation of the blends in the film forming process.

用核磁共振方法表征6(8)氨基-3H苯[1,2]氧嗪-1,4-二酮

用一维1HNMR、13CNMR方法研究了6(8)氨基-3H苯[1,2]氧嗪-1,4二-酮的结构,并通过二维1H-1H同核相关谱(COSY)、13C-1H异核相关谱(HMQC)及13C-1H异核远程相关谱(HMBC)进一步确定了该类化合物的1H谱和13C谱中各谱峰的归属,为研究同类化合物表征提供了依据。

间同立构1,2-聚丁二烯的合成和形态结构研究

间同立构1,2-聚丁二烯自1955年问世以来 ,引起人们的广泛关注 ,但绝大多数研究工作集中在聚合物的合成方面[1～3] ,对其形态结构方面的研究却很少报道[4] ,原因是该聚合物分子侧链含有大量双链 ,在较高温度下 (>150℃ )很容易产生热交联 ,这给结构研究造成了很大困难 .间同立构1,2-聚丁二烯的性能取决于间规度 ,低间规度聚合物呈现弹性体特征 ,而高间规度聚合物则是一种半结晶性塑料 ,其结晶为平面锯齿链正交堆砌 ,Pacm空间群[4] .本文采用一种新的催化体系 ,使合成的1,2-聚丁二烯间规度可以调控.同时首次报道了结晶性间规1,2-聚丁二烯稀溶液浇铸薄膜形成具有单晶取向的板条状片层结构,并应用电子显微学和电子衍射技术确定其晶体结构.1.实验部分1.1样品及试剂　乙酰基丙酮铁 [(Fe(acac) 3)纯度为 99.9% ],使用时配成0.2mol/ L的甲苯溶液 ;三异丁基铝 [Al(i-Bu) 3]由 Aldrich公司提供 ;氢化亚磷酸二乙酯 (DEP)及丁二烯由锦州化学公司提供 ;丁二烯通过蒸馏进行纯化 ;己烷使用前在 Na/ K合金...

电子反常供需型Diels-Alder反应合成2-吡啶基吡啶

电子反常供需型Diels-Alder反应(inverse electron demabd Diels-Alder reaction,IDA)因其在天然生物碱及类似物合成中的应用,在近20年来已经逐渐引起关注[1].含氮芳杂环体系1,2,4-三嗪由于其特有的缺电子特征,作为双烯体非常适于进行这类反应[2].本文利用IDA反应从3-吡啶基-5,6-二取代-1,2,4-三嗪出发,设计出一条简捷、低成本的合成路线,成功地合成出不对称取代的2,3′-联吡啶和2,4′-联吡啶.这一类化合物已被应用于药物中间体或有机配体.

Alkali metal ions transfer across a water/1,2-dichloroethane interface facilitated by a novel monoaza-B15C5 derivative

In this paper, a novel monoaza-B15C5 derivative, N-(2-tosylamino)-isopentyl-monoaza-15-crown-5 (L), is used as an ionophore to facilitate alkali metal cations transfer across a water/1,2-dichloroethane (W/DCE) interface. Well-defined voltammetric behaviors are observed at the polarized W/DCE interfaces supported at micro- and nano-pipets except Cs+. The diffusion coefficient of this ionophore in the DCE phase is calculated to be equal to (3.3+/-0.2) x 10(-6) cm(2) s(-1). The experimental results indicate that a 1:1 (metal: ionophore) complex is formed at the interface with a TIC/TID mechanism. The selectivity of this ionophore towards alkali ions follows the sequence Na+ > Li+ > K+ > Rb+ > Cs+. The logarithm of the association constants (log beta(1)(0)) of the LiL+, NaL+, KL+ and RbL+ complexes in the DCE phase are calculated to be 10.6, 11.6, 9.0 and 7.1, respectively. The kinetic parameters are determined by steady-state voltammograms using nanopipets. The standard rate constants (k(0)) for Li+, Na+, K+ and Rb+ transfers facilitated by L are 0.54+/-0.05, 0.63+/-0.09, 0.51+/-0.04 and 0.46+/-0.06 cm s(-1), respectively. The pH values of aqueous solution have little effect on the electrochemical behaviors of these facilitated processes. The results predicate that this new type of ionophore might be useful to fabricate electrochemical sensor of sodium ion.

Mechanisms of sodium and potassium ions transfer facilitated by dibenzo-15-crown-5 across the water /1,2-dichloroethane interface using micropipettes

The transfer of sodium and potassium ions facilitated by dibenzo-15-crown-5 (DB15C5) has been studied at the micro-water/1,2-dichloroethane (water/DCE) interface supported at the tip of a micropipette. Cyclic volt-ammetric measurements were performed in two limiting conditions: the bulk concentration of Na+ or K+ in the aqueous phase is much higher than that of DB15C5 in the organic phase (DB15C5 diffusion controlled process) and the reverse condition (metal ion diffusion controlled process). The mechanisms of the facilitated Na+ transfer by DB15C5 are both transfer by interfacial complexation (TIC) with 1 : 1 stoichiometry under these two conditions, and the corresponding association constants were determined at log beta(1) = 8.97 +/- 0.05 or log beta(1) = 8.63 +/- 0.03. However, the transfers of K+ facilitated by DB15C5 show different behavior. In the former case it is a TIC process and its stoichiometry is 1 : 2, whereas in the latter case two peaks during the forward scan were observed, the first of which was confirmed as the formation of K (DB15C5)(2) at the interface by a TIC mechanism, while the second one may be another TIC process with 1 : 1 stoichiometry in the more positive potential. The relevant association constants calculated for the complexed ion, K+(DB15C5)(2), in the organic phase in two cases, logbeta(2), are 13.64 +/- 0.03 and 11.34 +/- 0.24, respectively.

Dinuclear half-sandwich complexes containing bridging 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolato ligands. Molecular structures of Cp2Fe2(CO)(3)[mu-Se2C2(B10H10)], Cp2Ru2[mu-S2C2(B10H10)](2), and CP*Ru-2(2)(mu-Se)[mu-Se2C2(B10H10)].

Three prototypes of dinuclear complexes were obtained from the reactions of dilithium 1,2-dicarbacloso-dodecaborane-1,2-dichalcogenolates, (B10H10)C-2-(ELi)(2) (E = S, Se), with CpFe(CO)(2)Cl (1), CpRu(PPh3)(2)Cl (2), or [Cp*RuCl2](2) (3), respectively, and their structures have been determined by X-ray crystallography.

Synthesis, properties and structural characterization of an intermolecular photosensitive complex: (HGly-Gly)(3)PMo12O40 center dot 4H(2)O

The first heteropoly acid-dipeptide complex, (HGly-Gly)(3)PMo12O40.4H(2)O, was synthesized and characterized by elemental analysis, IR, UV, H-1 NMR and single crystal X-ray diffraction. The X-ray crystallographic study showed that the crystal structure was constructed from N-H...O and O-H...O hydrogen bonds among the (HGly-Gly)(+), H2O and PMo12O403- units. This structure represents a model interaction between polyoxometalates and proteins. The complex has photosensitivity under irradiation by sunlight. The fluorescent activity of this compound is also reported.

二苯基-15-冠-5加速钠离子和钾离子在微米管支撑的微-水/1,2-二氯乙烷界面上的转移反应

玻璃微米管针尖可用于支撑微米级的水/1,2-二氯乙烷（W/DCE）界面,并用来研究二苯基-15-冠-5（DB15C5）加速钠离子和钾离子转移反应的机理和求算其络合物的稳定常数.在两种极限情况下,即水相中金属离子浓度远大于有机相中DB15C5的浓度（DB15C5扩散控制过程）和有机相中DB15C5的浓度远大于水相中金属离子浓度（金属离子扩散控制过程）,循环伏安研究表明,加速钠离子转移反应均发生1∶1（金属离子:载体）的界面络合转移过程,相应的一级络合常数分别为logβ1=8.97±0.05和logβ1=8.63±0.03.而对于加速钾离子转移反应,当 DB15C5扩散控制时发生的是一个1:2的界面络合转移过程,当钾离子扩散控制时,在电位窗内却观察到两个过程:一个较低电位的1∶2的界面络合转移过程和一个较高电位的1∶1界面络合转移过程.两种极限条件下所求算的钾离子和DB15C5的二级络合常数分别为logβ1=13.64±0.03和logβ2=11.34±0.24.

Simultaneous determination of 2-aminothiazole, 2-aminobenzothiazole and 2-mercaptobenzothiazole by capillary electrophoresis with end-column amperometric detection

Capillary electrophoresis with amperometric detection is evaluated for the simultaneous determination of 2-aminothiazole (A), 2-amino-benzothiazole (AB), 2-mercaptobenzothiazole (AM). The cyclic voltammogram, hydrodynamic voltammogram, effect of pH, concentration of buffer and separation voltage on the separation and the detection were studied. The conditions were optimized as follows: 50 mM phosphate buffet; pH 6.0, 2s at 17.5 kV sample injection, separation at 17.5 kV, 1.2 V as detection potential. The method provided low detection limit as 0.5 mu M, 0.05 mu M and 0.01 mu M, wide linear range 2-200 mu M, 10-200 mu M and 0.025-100 mu M for A, AB, and AM, respectively. The variations in peak current and migration time for 15 consecutive injections of a standard containing 5 mu M each compound were 3.7, 2.1, and 3.9%, and 1.2, 0.8, and 1.2%, for A, AB and AM, respectively. This method was employed to analyze river water.

Voltammetric study of the sodium ion transfer across micro-water/1,2-dichloroethane interface facilitated by terminal-vinyl liquid crystal crown ether

Sodium ion transfer across micro-water/1,2-dichloroethane (DCE) interface facilitated by a novel ionophore, terminal-vinyl liquid crystal crown ether (LCCE) was studied by cyclic voltammetry. LCCEs have potential applications because of their physicochemical properties and the utilization of crown ethers as selective ionophoric units in other functionalized compounds are interesting. Host-guest-type behavior for such compounds in the liquid-crystalline state is studied. The experimental results suggest that the transfer of the sodium ion facilitated by LCCE was controlled by diffusion of LCCE from bulk solution of DCE to the interface. The diffusion coefficient of LCCE in DCE was calculated to be equal to (3.62 +/- 0.20) x 10(-6) cm(2)/s. Steady-state voltammograms are due to sodium ion transfer facilitated by the formation of 1: 1 metal (M)-LCCE complex at the interface and the mechanism tends to be transfer by interfacial complexation or dissociation (TIC or TID). The stability constant of the complex formed was determined to be log beta(o) = 5.5 in DCE phase. The influence of parameters such as concentration of sodium ion and concentration of LCCE on the sodium ion transfer was investigated.

应用扫描电化学显微镜研究水/1,2-二氯乙烷界面上离子诱导的电子转移反应

应用扫描电化学显微镜和微电极技术研究了水 / 1,2 二氯乙烷界面上的反向电子转移反应 .分别以K4 Fe(CN) 6和 7,7,8,8 四氰代二甲基苯醌 (TCNQ)作为水相和有机相的电活性物质 ,通过选择合理的共同离子 (TPAs+与TBA+)来控制界面电位差 ,实现了这一在热力学上通常不可能实现的反向电子转移反应 .利用扫描电化学显微镜给出的正负反馈信息 ,研究了界面电位差驱动的液 /液界面上的电子转移反应 ,并进一步得到了在不同的共同离子浓度比时 ,此异相界面反应速率常数kf 为 1 3× 10 -31 8× 10 -2 cm/s(共同离子为TBA+)和 2 5× 10 -32 8× 10 -2 cm/s(共同离子为TPAs+) .验证了此反应速率常数kf 是由界面电位差所决定的 .在此实验条件下 ,此反应速率常数kf 与界面电位差的关系遵守Butler Volmer公式 .

应用玻璃微米/纳米管和循环伏安法研究邻菲咯啉加速质子在水/1,2-二氯乙烷界面的转移过程

利用循环伏安法研究了玻璃微米 /纳米管支持的水 / 1 ,2 -二氯乙烷 ( DCE)界面上邻菲咯啉加速质子的转移过程 .将装有水溶液的微米 /纳米管插入到 DCE溶液中 ,可以形成微米 /纳米级 -液 /液界面 ,在选定的实验条件下 ,其作用类似于微米 /纳米电极 .用微米管考察了此加速转移过程的半波电位与 p H值 ( 1 .1～7.5 )的关系 ,利用 Matsuda等提出的理论公式计算了邻菲咯啉与质子在有机相和水相中的络合常数比 .并用纳米管计算得到邻菲咯啉加速质子在水 / DCE界面转移过程中的标准速率常数 ( k0 )和转移系数 (α)分别为( 0 .1 83± 0 .0 5 4 ) cm/ s和 0 .70± 0 .0

Theoretical investigation of LaC3n+ (n = 0, 1, 2) clusters by density functional theory

LaC3n+ (n = 0, 1, 2) clusters have been studied using B3LYP (Becke 3-parameter-Lee-Yang-Parr) density functional method. The basis set is Dunning/ Huzinaga valence double zeta for carbon and [2s2p2d] for lanthanum, denoted LANL1DZ. Four isomers are presented for each cluster; two of them are edge binding isomers with C-2 upsilon symmetry, the other two are Linear chains with C-infinity upsilon symmetry. Meanwhile, two spin states for each isomer, that is, singlet and triplet for LaC3+, doublet and quartet for LaC3 and LaC32+, respectively, are also considered. Geometries, vibrational frequencies, infrared intensities, and other quantities are reported and discussed. The results indicate that at some spin states; the C-2 upsilon symmetry isomers are the dominant structures, while for the other spin states, linear isomers are energetically favored. (C) 1998 John Wiley & Sons, Inc.