Symbolic Dynamics Analysis: a new methodology for foetal heart rate variability analysis

Cardiotocography (CTG) is a widespread foetal diagnostic methods. However, it lacks of objectivity and reproducibility since its dependence on observer's expertise. To overcome these limitations, more objective methods for CTG interpretation have been proposed. In particular, many developed techniques aim to assess the foetal heart rate variability (FHRV). Among them, some methodologies from nonlinear systems theory have been applied to the study of FHRV. All the techniques have proved to be helpful in specific cases. Nevertheless, none of them is more reliable than the others. Therefore, an in-depth study is necessary. The aim of this work is to deepen the FHRV analysis through the Symbolic Dynamics Analysis (SDA), a nonlinear technique already successfully employed for HRV analysis. Thanks to its simplicity of interpretation, it could be a useful tool for clinicians. We performed a literature study involving about 200 references on HRV and FHRV analysis; approximately 100 works were focused on non-linear techniques. Then, in order to compare linear and non-linear methods, we carried out a multiparametric study. 580 antepartum recordings of healthy fetuses were examined. Signals were processed using an updated software for CTG analysis and a new developed software for generating simulated CTG traces. Finally, statistical tests and regression analyses were carried out for estimating relationships among extracted indexes and other clinical information. Results confirm that none of the employed techniques is more reliable than the others. Moreover, in agreement with the literature, each analysis should take into account two relevant parameters, the foetal status and the week of gestation. Regarding the SDA, results show its promising capabilities in FHRV analysis. It allows recognizing foetal status, gestation week and global variability of FHR signals, even better than other methods. Nevertheless, further studies, which should involve even pathological cases, are necessary to establish its reliability.

Essays in policy evaluation

This dissertation consists of three empirical studies that aim at providing new evidence in the field of public policy evaluation. In particular, the first two chapters focus on the effects of the European cohesion policy, while the third chapter assesses the effectiveness of Italian labour market incentives in reducing long-term unemployment. The first study analyses the effect of EU funds on life satisfaction across European regions , under the assumption that projects financed by structural funds in the fields of employment, education, health and environment may affect the overall quality of life in recipient regions. Using regional data from the European Social Survey in 2002-2006, it resorts to a regression discontinuity design, where the discontinuity is provided by the institutional framework of the policy. The second study aims at estimating the impact of large transfers from a centralized authority to a local administration on the incidence of white collar crimes. It merges a unique dataset on crimes committed in Italian municipalities between 2007 and 2011 with information on the disbursement of EU structural funds in 2007-2013 programming period, employing an instrumental variable estimation strategy that exploits the variation in the electoral cycle at local level. The third study analyses the impact of an Italian labour market policy that allowed firms to cut their labour costs on open-ended job contracts when hiring long-term unemployed workers. It takes advantage of a unique dataset that draws information from the unemployment lists in Veneto region and it resorts to a regression discontinuity approach to estimate the effect of the policy on the job finding rate of long-term unemployed workers.

A simple and novel method to monitor breathing and heart rate in awake and urethane-anesthetized newborn rodents

Rodents are most useful models to study physiological and pathophysiological processes in early development, because they are born in a relatively immature state. However, only few techniques are available to monitor non-invasively heart frequency and respiratory rate in neonatal rodents without restraining or hindering access to the animal. Here we describe experimental procedures that allow monitoring of heart frequency by electrocardiography (ECG) and breathing rate with a piezoelectric transducer (PZT) element without hindering access to the animal. These techniques can be easily installed and are used in the present study in unrestrained awake and anesthetized neonatal C57/Bl6 mice and Wistar rats between postnatal day 0 and 7. In line with previous reports from awake rodents we demonstrate that heart rate in rats and mice increases during the first postnatal week. Respiratory frequency did not differ between both species, but heart rate was significantly higher in mice than in rats. Further our data indicate that urethane, an agent that is widely used for anesthesia, induces a hypoventilation in neonates whilst heart rate remains unaffected at a dose of 1 g per kg body weight. Of note, hypoventilation induced by urethane was not detected in rats at postnatal 0/1. To verify the detected hypoventilation we performed blood gas analyses. We detected a respiratory acidosis reflected by a lower pH and elevated level in CO2 tension (pCO2) in both species upon urethane treatment. Furthermore we found that metabolism of urethane is different in P0/1 mice and rats and between P0/1 and P6/7 in both species. Our findings underline the usefulness of monitoring basic cardio-respiratory parameters in neonates during anesthesia. In addition our study gives information on developmental changes in heart and breathing frequency in newborn mice and rats and the effects of urethane in both species during the first postnatal week.

Analisi dei fattori che influenzano la crescita delle arterie polmonari nei pazienti con cuore funzionalmente univentricolare sottoposti ad anastomosi cavo-polmonare bidirezionale

La BCPA e’ ormai utilizzata routinariamente come stadio intermedio della palliazione di Fontan nel trattamento dei cuori funzionalmente univentricolari e si conferma intervento a ridotta mortalità e morbilità. La crescita delle arterie polmonari dopo BCPA è abbastanza variabile ed imprevedibile, le dimensioni indicizzate dei rami principali sembrano tendenzialmente ridotte, tranne quelle dell’arteria lobare inferiore destra, la quale beneficerebbe del flusso preferenziale della BCPA. Proprio i pazienti con arterie polmonari più piccole mostrerebbero un maggior incremento di dimensioni delle stesse dopo BPCA. Il ruolo ed i vantaggi del flusso accessorio nella BCPA sono ancora da definire; tuttavia sembrerebbe offrire vantaggi in termini di crescita delle arterie polmonari, soprattutto il ramo lobare sinistro, e di miglior outcome dopo TCPC.

Calibration study of bivalve shells : implications for paleoenvironmental reconstruction

The accretionary shells of bivalve mollusks can provide environmental information, such as water temperature, precipitation, freshwater fluxes, primary productivity and anthropogenic activities in the form of variable growth rates and variable geochemical properties, such as stable oxygen and carbon isotopes. However, paleoenvironmental reconstructions are constrained by uncertainties about isotopic equilibrium fractionation during shell formation, which is generally acknowledged as a reasonable assumption for bivalves, but it has been disputed in several species. Furthermore, the variation in shell growth rates is accepted to rely on multiple environmental variables, such as temperature, food availability and salinity, but can differ from species to species. Therefore, it is necessary to perform species-specific calibration studies for both isotope proxies and shell growth rates before they can be used with confidence for environmental interpretations of the past. Accordingly, the principal objective of this Ph.D research is to examine the reliability of selected bivalve species, the long-lived Eurhomalea exalbida (Dillwyn), the short-lived and fast growing species Paphia undulata (Born 1778), and the freshwater mussel Margaritifera falcata (Gould 1850), as paleoenvironmental proxy archives.rnThe first part is focused on δ18Oshell and shell growth history of live-collected E. exalbida from the Falkland Islands. The most remarkable finding, however, is that E. exalbida formed its shell with an offset of -0.48‰ to -1.91‰ from the expected oxygen isotopic equilibrium with the ambient water. If this remained unnoticed, paleotemperature estimates would overestimate actual water temperatures by 2.1-8.3°C. With increasing ontogenetic age, the discrepancy between measured and reconstructed temperatures increased exponentially, irrespective of the seasonally varying shell growth rates. This study clearly demonstrates that, when the disequilibrium fractionation effect is taken into account, E. exalbida can serve as a high-resolution paleoclimate archive for the southern South America. The species therefore provides quantifiable temperature estimates, which yields new insights into long-term paleoclimate dynamics for mid to high latitudes on the southern hemisphere.rnThe stable carbon isotope of biogenic carbonates is generally considered to be useful for reconstruction of seawater dissolved inorganic carbon. The δ13Cshell composition of E. exalbida was therefore, investigated in the second part of this study. This chapter focuses on inter-annual and intra-annual variations in δ13Cshell. Environmental records in δ13Cshell are found to be strongly obscured by changes in shell growth rates, even if removing the ontogenetic decreasing trend. This suggests that δ13Cshell in E. exalbida may not be useful as an environmental proxy, but a potential tool for ecological investigations. rnIn addition to long-lived bivalve species, short-lived species that secrete their shells extremely fast, can also be useful for environmental reconstructions, especially as a high-resolution recorder. Therefore, P. undulata from Daya Bay, South China Sea was utilized in Chapter 4 to evaluate and establish a potential proxy archive for past variations of the East Asian monsoon on shorter time-scales. The δ18Oshell can provide qualitative estimates of the amount of monsoonal rain and terrestrial runoff and the δ13Cshell likely reflect the relative amount of isotopically light terrestrial carbon that reaches the ocean during the summer monsoon season. Therefore, shells of P. undulata can provide serviceable proxy archives to reconstruct the frequency of exceptional summer monsoons in the past. The relative strength of monsoon-related precipitation and associated changes in ocean salinity and the δ13C ratios of the dissolved inorganic carbon signature (δ13CDIC) can be estimated from the δ18Oshell and δ13Cshell values as well as shell growth patterns. rnIn the final part, the freshwater pearl shell M. falcata from four rivers in British Columbia, Canada was preliminarily studied concerning the lifespans and the shell growth rates. Two groups separated by the Georgia Strait can be clearly distinguished. Specimens from the western group exhibit a shorter lifespan, while the eastern group live longer. Moreover, the average lifespan seems to decrease from south to north. The computed growth equations from the eastern and western groups differ as well. The western group exhibits a lower growth rate, while bivalves from the eastern group grow faster. The land use history seems to be responsible for the differences in lifespans of the specimens from the two groups. Differences in growth rate may be induced by differences in water temperature or nutrient input also related to the land use activities.

Feedback linearization of antagonistically actuated variable stiffness joints with twisted string actuators

The work of this thesis is on the implementation of a variable stiffness joint antagonistically actuated by a couple of twisted-string actuator (TSA). This type of joint is possible to be applied in the field of robotics, like UB Hand IV (the anthropomorphic robotic hand developed by University of Bologna). The purposes of the activities are to build the joint dynamic model and simultaneously control the position and stiffness. Three different control approaches (Feedback linearization, PID, PID+Feedforward) are proposed and validated in simulation. To improve the properties of joint stiffness, a joint with elastic element is taken into account and discussed. To the end, the experimental setup that has been developed for the experimental validation of the proposed control approaches.

Traffic light policies for low penetration rate of monitoring devices

La gestione del traffico è una delle principali problematiche delle città moderne, e porta alla definizione di nuove sfide per quanto riguarda l’ottimizzazione del flusso veicolare. Il controllo semaforico è uno degli elementi fondamentali per ottimizzare la gestione del traffico. Attualmente la rilevazione del traffico viene effettuata tramite sensori, tra i quali vengono maggiormente utilizzate le spire magnetiche, la cui installazione e gestione implica costi elevati. In questo contesto, il progetto europeo COLOMBO si pone come obiettivo l’ideazione di nuovi sistemi di regolazione semaforica in grado di rilevare il traffico veicolare mediante sensori più economici da installare e mantenere, e capaci, sulla base di tali rilevazioni, di auto organizzarsi, traendo ispirazione dal campo dell’intelligenza artificiale noto come swarm intelligence. Alla base di questa auto organizzazione semaforica di COLOMBO vi sono due diversi livelli di politiche: macroscopico e microscopico. Nel primo caso le politiche macroscopiche, utilizzando il feromone come astrazione dell’attuale livello del traffico, scelgono la politica di gestione in base alla quantità di feromone presente nelle corsie di entrata e di uscita. Per quanto riguarda invece le politiche microscopiche, il loro compito è quello di deci- dere la durata dei periodi di rosso o verde modificando una sequenza di fasi, chiamata in COLOMBO catena. Le catene possono essere scelte dal sistema in base al valore corrente della soglia di desiderabilità e ad ogni catena corrisponde una soglia di desiderabilità. Lo scopo di questo elaborato è quello di suggerire metodi alternativi all’attuale conteggio di questa soglia di desiderabilità in scenari di bassa presenza di dispositivi per la rilevazione dei veicoli. Ogni algoritmo complesso ha bisogno di essere ottimizzato per migliorarne le performance. Anche in questo caso, gli algoritmi proposti hanno subito un processo di parameter tuning per ottimizzarne le prestazioni in scenari di bassa presenza di dispositivi per la rilevazione dei veicoli. Sulla base del lavoro di parameter tuning, infine, sono state eseguite delle simulazioni per valutare quale degli approcci suggeriti sia il migliore.

Fast frontend electronics for high rate particle detectors

Future experiments in nuclear and particle physics are moving towards the high luminosity regime in order to access rare processes. In this framework, particle detectors require high rate capability together with excellent timing resolution for precise event reconstruction. In order to achieve this, the development of dedicated FrontEnd Electronics (FEE) for detectors has become increasingly challenging and expensive. Thus, a current trend in R&D is towards flexible FEE that can be easily adapted to a great variety of detectors, without impairing the required high performance. This thesis reports on a novel FEE for two different detector types: imaging Cherenkov counters and plastic scintillator arrays. The former requires high sensitivity and precision for detection of single photon signals, while the latter is characterized by slower and larger signals typical of scintillation processes. The FEE design was developed using high-bandwidth preamplifiers and fast discriminators which provide Time-over-Threshold (ToT). The use of discriminators allowed for low power consumption, minimal dead-times and self-triggering capabilities, all fundamental aspects for high rate applications. The output signals of the FEE are readout by a high precision TDC system based on FPGA. The performed full characterization of the analogue signals under realistic conditions proved that the ToT information can be used in a novel way for charge measurements or walk corrections, thus improving the obtainable timing resolution. Detailed laboratory investigations proved the feasibility of the ToT method. The full readout chain was investigated in test experiments at the Mainz Microtron: high counting rates per channel of several MHz were achieved, and a timing resolution of better than 100 ps after walk correction based on ToT was obtained. Ongoing applications to fast Time-of-Flight counters and future developments of FEE have been also recently investigated.

Bedeutung von allelen Varianten des Hexose-Transporters Hxt3p und der Hexokinasen Hxk1p und Hxk2p für Aufnahme und Verwertung von Glucose und Fructose durch Weinhefen

In Hinsicht darauf, dass sich S. cerevisiae-Stämme im Laufe der Domestizierung und Anpassung an verschiedene Habitate genetisch verändert haben, wurde in dieser Arbeit eine repräsentative Auswahl von Labor-, kommerziellen und in der Natur vorkommenden Saccharomyces-Stämmen und ihren Interspezies-Hybriden auf die Verbreitung alleler Varianten der Hexokinase-Gene HXK1 und HXK2 getestet. Von den Hexose-Transportern stand Hxt3p im Mittelpunkt, da seine essentielle Rolle bei der Vergärung von Glucose und Fructose bereits belegt wurde.rnIn dieser Arbeit wurde gezeigt, dass es bedeutende Unterschiede in der Vergärung von Glucose und Fructose zwischen Weinhefen der Gattung Saccharomyces gibt, die z.T. mit Struktur-Varianten des Hexose-Transporter Hxt3p korrelieren. rnInsgesamt 51 Hefestämme wurden auf ihre allele Variante des HXT3-Gens untersucht. Dabei haben sich drei Hauptgruppen (die Fermichamp®-Typ Gruppe, Bierhefen und Hybrid-Stämme) mit unterschiedlichem HXT3-Allel ergeben. Im Zusammenhang mit der Weinherstellung wurden signifikante Nukleotid-Substitutionen innerhalb des HXT3-Gens der robusten S. cerevisiae-Stämme (wie z.B. Sekthefen, kommerzielle Starterkulturen) und Hybrid-Stämmen festgestellt. Diese Hefen zeichneten sich durch die Fähigkeit aus, den Most trotz stressigen Umwelt-Bedingungen (wie hohe Ethanol-Konzentration, reduzierter Ammonium-Gehalt, ungünstiges Glucose:Fructose-Verhältnis) zu vergären. rnDie Experimente deuten darauf hin, dass die HXT3-Allel-Variante des als Starterkultur verwendbaren Stammes Fermichamp®, für den verstärkten Fructose-Abbau verantwortlich ist. Ein gleiches Verhalten der Stämme mit dieser Allel-Variante wurde ebenfalls beobachtet. Getestet wurden die S. cerevisiae-Stämme Fermichamp® und 54.41, die bezüglich Hxt3p-Aminosäuresequenz gleich sind, gegenüber zwei S. cerevisiae-Stämmen mit dem HXT3-Standard-Alleltyp Fermivin® und 33. Der Unterschied in der Hexose-Verwertung zwischen Stämmen mit Fermichamp®- und Standard-Alleltyp war in der Mitte des Gärverlaufs am deutlichsten zu beobachten. Beide Gruppen, sowohl mit HXT3 Fermichamp®- als auch Fermivin®-Alleltyp vergoren die Glucose schneller als die Fructose. Der Unterschied aber zwischen diesen HXT3-Alleltypen bei der Zucker-Verwertung lag darin, dass der Fermichamp®-Typ eine kleinere Differenz in der Abbau-Geschwindigkeit der beiden Hexosen zeigte als der Fermivin®-Typ. Die Zuckeraufnahme-Messungen haben die relativ gute Fructose-Aufnahme dieser Stämme bestätigt.rnEbenfalls korrelierte der fructophile Charakter des Triple-Hybrides S. cerevisiae x S. kudriavzevii x S. bayanus-Stamm HL78 in Transportexperimenten mit verstärkter Aufnahme von Fructose im Vergleich zu Glucose. Insgesamt zeigte dieser Stamm ähnliches Verhalten wie die S. cerevisiae-Stämme Fermichamp® und 54.41. rnIn dieser Arbeit wurde ein Struktur-Modell des Hexose-Transporters Hxt3p erstellt. Als Basis diente die zu 30 % homologe Struktur des Proton/Xylose-Symporters XylE aus Escherichia coli. Anhand des Hxt3p-Modells konnten Sequenzbereiche mit hoher Variabilität (Hotspots) in drei Hxt3p-Isoformen der Hauptgruppen (die Fermichamp®-Typ Gruppe, Bierhefen und Hybrid-Stämme) detektiert werden. Diese signifikanten Aminosäure-Substitutionen, die eine mögliche Veränderung der physikalischen und chemischen Eigenschaften des Carriers mit sich bringen, konzentrieren sich auf drei Bereiche. Dazu gehören die Region zwischen den N- und C-terminalen Domänen, die cytosolische Domäne und der Outside-Loop zwischen Transmembranregion 9 und Transmembranregion 10. rnObwohl die Transportmessungen keinen Zusammenhang zwischen Stämmen mit unterschiedlichen HXT3-Allelen und ihrer Toleranz gegenüber Ethanol ergaben, wurde ein signifikanter Anstieg in der Zuckeraufnahme nach vorheriger 24-stündiger Inkubation mit 4 Vol% Ethanol bei den Teststämmen beobachtet. rnInsgesamt könnten allele Varianten von HXT3-Gen ein nützliches Kriterium bei der Suche nach robusten Hefen für die Weinherstellung oder für andere industrielle Anwendungen sein. Die Auswirkung dieser Modifikationen auf die Struktur und Effizienz des Hexose-Transporters, sowie der mögliche Zusammenhang mit Ethanol-Resistenz müssen weiter ausführlich untersucht werden. rnEin Zusammenhang zwischen den niedrig variablen Allel-Varianten der Hexokinase-Gene HXK1 und HXK2 und dem Zucker-Metabolismus wurde nicht gefunden. Die Hexokinasen der untersuchten Stämme wiesen allerdings generell eine signifikante geringere Affinität zu Fructose im Vergleich zu Glucose auf. Hier liegt sicherlich eine Hauptursache für den Anstieg des Fructose:Glucose-Verhältnisses im Laufe der Vergärung von Traubenmosten.rn

Dynamic Adaptive Streaming over Http: implementazione e analisi sperimentale di algoritmi di rate adaptation su client Android

Il lavoro svolto in questa tesi consiste nell'implementare un'applicazione Android per lo streaming video, conforme allo standard MPEG-DASH. L'obiettivo è quello di fornire un valido strumento al fine di eseguire delle analisi sperimentali su algoritmi particolari, detti di rate adaptation. MPEG-Dynamic Adaptive Streaming over Http è uno standard emergente ed è considerato da molti il futuro dello streaming multimediale. Questa tecnologia consente di auto-regolare la qualità del video in base alle condizioni della rete, la capacità del dispositivo o le preferenze dell'utente. Inoltre, essendo uno standard, permette di rendere interoperabili i server e i device dei vari fornitori di contenuti multimediali. Nei primi capitoli introduttivi verrà presentato lo standard e i lavori correlati, successivamente verrà descritta la mia proposta applicativa: DashPlayer. In conclusione, verrà compiuta una valutazione sperimentali sugli algoritmi sopracitati che costituiscono la parte logico-funzionale dell'applicazione.

Outdoor production of Isochrysis galbana (T-iso) in industrial scale photobioreactors and modelling of its photosynthesis and respiration rate

Isochrysis galbana is a widely-used strain in aquaculture in spite of its low productivity. To maximize the productivity of processes based on this microalgae strain, a model was developed considering the influence of irradiance, temperature, pH and dissolved oxygen concentration on the photosynthesis and respiration rate. Results demonstrate that this strain tolerates temperatures up to 35ºC but it is highly sensitive to irradiances higher than 500 µE·m-2·s-1 and dissolved oxygen concentrations higher than 11 mg·l-1. With the researcher group of the “Universidad de Almeria”, the developed model was validated using data from an industrial-scale outdoor tubular photobioreactor demonstrating that inadequate temperature and dissolved oxygen concentrations reduce productivity to half that which is maximal, according to light availability under real outdoor conditions. The developed model is a useful tool for managing working processes, especially in the development of new processes based on this strain and to take decisions regarding optimal control strategies. Also the outdoor production of Isochrysis galbana T-iso in industrial size tubular photobioreactors (3.0 m3) has been studied. Experiments were performed modifying the dilution rate and evaluating the biomass productivity and quality, in addition to the overall performance of the system. Results confirmed that T-iso can be produced outdoor at commercial scale in continuous mode, productivities up to 20 g·m-2·day-1 of biomass rich in proteins (45%) and lipids (25%) being obtained. The utilization of this type of photobioreactors allows controlling the contamination and pH of the cultures, but daily variation of solar radiation imposes the existence of inadequate dissolved oxygen concentration and temperature at which the cells are exposed to inside the reactor. Excessive dissolved oxygen reduced the biomass productivity to 68% of maximal, whereas inadequate temperature reduces to 63% of maximal. Thus, optimally controlling these parameters the biomass productivity can be duplicated. These results confirm the potential to produce this valuable strain at commercial scale in optimally designed/operated tubular photobioreactors as a biotechnological industry.

ChronOS Inject in Children with Benign Bone Lesions – Does It Increase the Healing Rate?

Benign bone lesions in children although rare, can result in a pathological fracture. Although their etiology and pathogenesis are not yet entirely clear, the phenomenon of spontaneous healing is well known. Nevertheless, some benign bone lesions are unlikely to heal spontaneously due to the patient's age or high risk of fracture and deformity due to the lesion's location or size. The following study presents our results after treatment of these bone cysts with chronOS Inject.

Variable Na(v)1.5 protein expression from the wild-type allele correlates with the penetrance of cardiac conduction disease in the Scn5a(+/-) mouse model

BACKGROUND: Loss-of-function mutations in SCN5A, the gene encoding Na(v)1.5 Na+ channel, are associated with inherited cardiac conduction defects and Brugada syndrome, which both exhibit variable phenotypic penetrance of conduction defects. We investigated the mechanisms of this heterogeneity in a mouse model with heterozygous targeted disruption of Scn5a (Scn5a(+/-) mice) and compared our results to those obtained in patients with loss-of-function mutations in SCN5A. METHODOLOGY/PRINCIPAL FINDINGS: Based on ECG, 10-week-old Scn5a(+/-) mice were divided into 2 subgroups, one displaying severe ventricular conduction defects (QRS interval>18 ms) and one a mild phenotype (QRS< or = 18 ms; QRS in wild-type littermates: 10-18 ms). Phenotypic difference persisted with aging. At 10 weeks, the Na+ channel blocker ajmaline prolonged QRS interval similarly in both groups of Scn5a(+/-) mice. In contrast, in old mice (>53 weeks), ajmaline effect was larger in the severely affected subgroup. These data matched the clinical observations on patients with SCN5A loss-of-function mutations with either severe or mild conduction defects. Ventricular tachycardia developed in 5/10 old severely affected Scn5a(+/-) mice but not in mildly affected ones. Correspondingly, symptomatic SCN5A-mutated Brugada patients had more severe conduction defects than asymptomatic patients. Old severely affected Scn5a(+/-) mice but not mildly affected ones showed extensive cardiac fibrosis. Mildly affected Scn5a(+/-) mice had similar Na(v)1.5 mRNA but higher Na(v)1.5 protein expression, and moderately larger I(Na) current than severely affected Scn5a(+/-) mice. As a consequence, action potential upstroke velocity was more decreased in severely affected Scn5a(+/-) mice than in mildly affected ones. CONCLUSIONS: Scn5a(+/-) mice show similar phenotypic heterogeneity as SCN5A-mutated patients. In Scn5a(+/-) mice, phenotype severity correlates with wild-type Na(v)1.5 protein expression.

The influence of saliva on the dissolution of calcium fluoride after application of different fluoride gels in vitro

OBJECTIVE: To determine the formation and dissolution of calcium fluoride on the enamel surface after application of two fluoride gel-saliva mixtures. METHOD AND MATERIALS: From each of 80 bovine incisors, two enamel specimens were prepared and subjected to two different treatment procedures. In group 1, 80 specimens were treated with a mixture of an amine fluoride gel (1.25% F-; pH 5.2; 5 minutes) and human saliva. In group 2, 80 enamel blocks were subjected to a mixture of sodium fluoride gel (1.25% F; pH 5.5; 5 minutes) and human saliva. Subsequent to fluoride treatment, 40 specimens from each group were stored in human saliva and sterile water, respectively. Ten specimens were removed after each of 1 hour, 24 hours, 2 days, and 5 days and analyzed according to potassium hydroxide-soluble fluoride. RESULTS: Application of amine fluoride gel resulted in a higher amount of potassium hydroxide-soluble fluoride than did sodium fluoride gel 1 hour after application. Saliva exerted an inhibitory effect according to the dissolution rate of calcium fluoride. However, after 5 days, more than 90% of the precipitated calcium fluoride was dissolved in the amine fluoride group, and almost all potassium hydroxide-soluble fluoride was lost in the sodium fluoride group. Calcium fluoride apparently dissolves rapidly, even at almost neutral pH. CONCLUSION: Considering the limitations of an in vitro study, it is concluded that highly concentrated fluoride gels should be applied at an adequate frequency to reestablish a calcium fluoride-like layer.