Marginal adaptation and performance of bioactive dental restorative materials in deciduous and young permanent teeth

Objective: The aim of this study was to investigate the adaptation of different types of restorations towards deciduous and young permanent teeth. Materials and Methods: Class V cavities were prepared in deciduous and young permanent teeth and filled with different materials (a conventional glass-ionomer, a resin-modified glass-ionomer, a poly-acid-modified composite resin and a conventional composite resin). Specimens were aged in artificial saliva for 1, 6, 12 and 18 months, then examined by SEM. Results: The composite resin and the polyacid-modified composite had better marginal adaptation than the glass-ionomers,though microcracks developed in the enamel of the tooth. The glass-ionomers showed inferior marginal quality and durability, but no microcracking of the enamel. The margins of the resin-modified glass-ionomer were slightly superior to the conventional glass-ionomer. Conditioning improved the adaptation of the composite resin, but the type of tooth made little or no difference to the performance of the restorative material. All materials were associated with the formation of crystals in the gaps between the filling and the tooth; the quantity and shape of these crystals varied with the material. Conclusions: Resin-based materials are generally better at forming sound, durable margins in deciduous and young permanent teeth than cements, but are associated with microcracks in the enamel. All fluoride-releasing materials give rise to crystalline deposits.

Polyacid-modified composite resins ("compomers") and their use in clinical dentistry

OBJECTIVES: This paper describes the chemistry and properties of polyacid-modified composite resins ("compomers") designed for use in clinical dentistry, and reviews the literature in this area. METHODS: Information has been obtained from over 50 published articles appearing in the dental and biomaterials literature, with studies being principally identified through MedLine. RESULTS: Published work shows that polyacid-modified composite resins constitute a discrete class of polymeric repair material for use in dentistry. Their distinction is that they contain hydrophilic components, and these cause water to be drawn into the material following cure. This triggers an acid-base reaction, and gives the materials certain clinically-desirable properties (fluoride release, buffering capability) that are also associated with glass-ionomer cements. The water uptake leads to a decline in certain, though not all, physical properties. However, clinical studies have shown these materials to perform acceptably in a variety of applications (Class I, Class II and Class V cavities, as fissure sealants and as orthodontic band cements), especially in children's teeth. CONCLUSIONS/SIGNIFICANCE: Polyacid-modified composite resins constitute a versatile class of dental repair material, whose bioactivity confers clinical advantages, and which are particularly useful in children's dentistry.

Fluoridation for dental public health

This article reviews the means by which fluoride is supplied to populations. Many public health authorities provide fluoridated drinking water, with typical concentrations of fluoride of between 0.5 and 1.0 ppm. This has been found to be safe and effective, though differences in caries incidence between fluoridated and non-fluoridated regions are less than they were 50 years ago, because of the wider availability of fluoridated products to the whole population. Concerns about the effect of fluoride on bone density and associated conditions are reviewed and the general conclusion from considering the literature on fluoride is that there is almost no cause for concern. Alternatives to water as a means of delivering fluoride to the general public that are being used in a number of countries are salt and milk. These alternatives are also reviewed and have been shown to give satisfactory levels of protection against caries, though milk is shown to be less satisfactory than water as a vehicle for fluoride delivery. Milk is also less effective in providing fluoride to individuals in the population, and is less likely to be consumed by people in lower socio-economic groups, precisely those who suffer most from dental caries. This study concludes that mass water fluoridation remains an important contribution to good oral health throughout the community.

Hormesis - Stimulation Of Colony Growth In Campanularia-Flexuosa (Hydrozoa) By Copper Cadmium And Other Toxicants

It is shown experimentally that subinhibitory concentrations of a number of toxic, or other agents that are typically inhibitory (copper, cadmium, tributyl tin fluoride, reduced salinity), may stimulate the growth of colonies of the hydroid Campanularia flexuosa, exhibiting a phenomenon known as hormesis. It is suggested that the stimulation of growth is not due to the specific properties of the different toxicants, but to an adaptive response of the hydroid to the inhibitory effect that they have in common. Growth is regulated by a control mechanism and it is proposed that the increased growth is a consequence of overcorrections to low levels of an inhibitory challenge. Examination of the toxicological literature shows that hormesis is a more common occurrence that is generally supposed, and it is suggested that the explanation given here might apply in other cases of hormesis.

YF[MoO4] and YCl[MoO4]: Two halide derivatives of yttrium ortho-oxomolybdate: Syntheses, structures, and luminescence properties

The halide derivatives of yttrium ortho-oxomolybdate YX[MoO4] (X = F, Cl) both crystallize in the monoclinic system with four formula units per unit cell. YF[MoO4] exhibits a primitive cell setting (space group P2(1)/c, a = 519.62(2) pm, b = 1225.14(7) pm, c = 663.30(3) pm, beta = 112.851(4)degrees), whereas the lattice of YCl[MoO4] shows face-centering (space group C2/m; a = 1019.02(5) pm, b = 720.67(4) pm, c = 681.50(3) pm, beta = 107.130(4)degrees). The two compounds each contain crystallographically unique Y3+ cations, which are found to have a coordination environment of six oxide and two halide anions. In the case of YF[MoO4], the coordination environment is seen as square antiprisms, and for YCl[MoO4], trigon-dodecahedra. are found. The discrete tetrahedral [MoO4](2-) units of the fluoride derivative are exclusively bound by six terminal Y3+ cations, while those of the chloride compound show a 5-fold coordination around the tetrahedra with one edge-bridging and four terminal Y3+ cations. The halide anions in each compound exhibit a coordination number of two, building up isolated planar rhombus-shaped units according to [Y2F2](4+) in YF[MoO4] and [Y2Cl2](4+) in YCl[MoO4], respectively. Both compounds were synthesized at high temperatures using Y2O3, MoO3, and the corresponding yttrium trihalide in a molar ratio of 1:3:1. Single crystals of both are insensitive to moist air and are found to be coarse shaped and colorless with optical band gaps situated in the near UV around 3.78 eV for the fluoride and 3.82 eV for the chloride derivative. Furthermore, YF[MoO4] seems to be a suitable material for doping to obtain luminescent materials because the Eu3+-doped compound shows an intense red luminescence, which has been spectroscopically investigated.

Transesterification of vegetable oils on basic large mesoporous alumina supported alkaline fluorides-Evidences of the nature of the active site and catalytic performances

KF, LiF and CsF/A(2)O(3) catalysts with different loadings from 1 to 20 wt% were prepared using aqueous solutions of the alkaline fluoride compounds by wet impregnation of basic mesoporous MSU-type alumina. The catalysts were activated under At at 400 degrees C for 2 h and monitored by in situ XRD measurements. The catalysts were also characterized using several techniques: N-2 adsorption/desorption isotherms at -196 degrees C, FTIR, DR-UV-vis, CO2-TPD, XRD, Al-27 CP/MAS NMR. These characterizations led to the conclusion that the deposition of alkaline fluorides on the alumina surface generates fluoroaluminates and aluminate species. The process is definitivated at 400 degrees C. The fluorine in these structures is less basic than in the parent fluorides, but the oxygen becomes more basic. The catalysts were tested for the transesterification of fatty esters under different experimental conditions using conventional heating, microwave and Ultrasound irradiation. Recycling experiments showed that these catalysts are stable for a limited number of cycles. (C) 2009 Elsevier Inc. All rights reserved.

Ionic liquids are not always green: hydrolysis of 1-butyl-3-methylimidazolium hexafluorophosphate

1-Butyl-3-methylimidazolium fluoride hydrate has been identified crystallographically as a decomposition product created during purification of the hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate. This highlights the need to treat ionic liquids much as one would any other research chemical with potentially hazardous properties, unknown toxicity and/or stability, particularly when searching for 'green solvents'.

Perturbed frequency-selective surfaces fabricated on large thin polymer membranes for multiband infrared applications

The design, fabrication, and characterization of single-screen perturbed frequency-selective surfaces (FSS) at infrared frequencies for single and multiband applications are reported. Single-band FSS based on parallel strips have been perturbed by decreasing the length of every second strip within the array in order to achieve dual band-stop responses. The same principle has been extended to design FSS exhibiting tri- and quadreflection bands. In addition, strip FSSs have been perturbed by replacing every second strip for a metallic ring, resulting in dual-band filters with different polarization responses of the bands. These designs have been fabricated on large thin polyimide membranes using sacrificial silicon wafers. An oxide interlayer between the sacrificial silicon wafer and the polyimide membrane is employed to stop the silicon etching and is wet etched subsequently by a solution of ammonium fluoride and acetic acid that does not attack either the polyimide membrane or the aluminium FSS elements. Fourier transform infrared spectroscopy measurements are presented to validate the predicted responses of the fabricated prototypes.

Feasibility study of high harmonic generation from short wavelength lasers interacting with solid targets

The generation of the third and fourth harmonics from the interaction of a 1 ps, ultraviolet (UV), krypton fluoride (KrF) laser with a solid surface is investigated. The conversion efficiency is seen to increase linearly with I lambda(2), with a transition from specular harmonic emission to emission into 2 pi steradians occurring between 10(15) and 10(16) W cm(-2) mu m(2). The diffuse emission is strongly dependent on the incidence angle of the laser, with the peak in emission at around 30 degrees being consistent with measurements for resonance absorption. Finally, the conversion efficiencies are found to be in agreement with particle-in-cell (PIC) simulations including appropriate density scalelengths. (C) 1998 Elsevier Science B.V.

Design of an intravaginal ring for the controlled delivery of 17b-estradiol as its 3-acetate ester

Suitable ester prodrugs of 17b-estradiol are identified, thus permitting effective sustained and controlled estrogen replacement therapy (ERT) from an elastomeric, silicone intravaginal ring (IVR). IVR devices of reservoir design were prepared by blending silicone elastomer base with n-propylorthosilicate (cross-linker) and 10% w/w of 17b-estradiol or an ester prodrug, the mix being activated with 0.5% w/w stannous octoate and cured at 808C for 2 min. A rate-controlling membrane was similarly prepared, without the active agent. IVR devices were of cross-sectional diameter 9 mm, outer diameter 54 mm, with core cross-sectional diameter of 2 mm and core length varied as required. Sink conditions were evident for the 17b-estradiol esters in 1.0% aqueous benzalkonium chloride solution. The low release rates into 0.9% w/v saline of the lipophilic valerate and benzoate esters were due to their intrinsically low aqueous solubilities. In vivo, these esters failed to raise plasma estradiol above baseline levels in postmenopausal human volunteers, despite good in vitro release characteristics under sink conditions. The best release rates under sink conditions, in combination with substantial aqueous solubilities as indicated by the release rates into saline, were observed for the acetate and propionate esters. A
combination of drug release characteristics, short plasma half-life and a toxicologically acceptable hydrolysis product indicated that 17b-estradiol-3-acetate was the prodrug of choice for IVR delivery of ERT. In vivo, an IVR device releasing
100 mg/day of estradiol as its 3-acetate ester maintained over 84 days a circulating plasma concentration in the region of 300 pmol l , within the clinically desirable range for ERT.

Alkyloxycarbonyl group migration in furanosides

A migration of methyloxycarbonyl group from secondary to primary hydroxyl was observed in furanosides (ribosides and xylosides) under usual desilylation conditions using tetrabutylammonium fluoride. The migration was studied further on several alkyloxycarbonyl furanosides under either basic or acidic conditions. As follows from C labelling experiments and product distribution, the migration in xylosides, proceeds intramolecularly via six-membered cyclic carbonate, whereas in ribosides, the migration is intermolecular. Acidic conditions prevented the migration in ribosides whereas the migration in xylosides was circumvented under neutral conditions. © 2012 Elsevier Ltd. All rights reserved.

A retrievable and highly selective fluorescent probe for monitoring dihydrogen phosphate ions based on a naphthalimide framework

A novel selective fluorescent chemosensor based on naphthalimide derivatives (AN-SB) was synthesized and characterized. Once combined with Cu2+, compound AN-SB could give rise to a visible yellow to orange color change and fluorescence quenching, while other metal ions showed subtle disturbance. The complex (AN-SB-Cu2+) formed by Cu2+ and AN-SB displayed high specificity for H2PO4-. Among the various anions, only H2PO4- induced the revival of color and fluorescence of AN-SB, resulting in "off-on" type sensing of H2PO4- anion. The signal transduction occured via reversible formation-separation of complex AN-SB-Cu2+, however, slight changes were observed in the presence of other anions. (C) 2013 Elsevier B.V. All rights reserved.

Root caries development in older adults- a prospective cohort study

Objectives: To identify factors associated with root caries development during a two year period in a population of independently living older adults. Methods: A prospective cohort study was carried out with 334 independently living volunteers aged 65 and older. At baseline (t0), each participant completed a questionnaire which recorded age, gender, medical history, fluoride exposure, oral and denture hygiene practices, smoking and alcohol consumption, diet information, and socio economic information. Clinical examinations were performed and stimulated saliva samples were collected. Patients were reviewed 12(t1) and 24(t2) months later to determine the root caries increment. Results: 307 adults were assessed at t1 and 280 were assessed at t2 with 83.8% of participants examined at 24 months. Incidence of root caries in this cohort was 17.4% at t1 and 21.6% at t2. The mean root caries increment was 0.43 (SD 1.45) surfaces at t1 and 0.70 (SD 1.86) surfaces at t2. Age >70 years, completing education at primary level, poor oral hygiene, xerostomia, coronal decay at baseline, higher root caries index at baseline and number of exposed root surfaces showed a statistically significant association (P < 0.05) with root caries development. Conclusion: Root caries is a substantive dental health problem for our older population. Root caries prevention strategies should be targeted at older adults who have poor plaque control and high levels of caries experience. In particular patients with xerostomia should be targeted with preventive measures.

Calix[4]pirróis: síntese e aplicação como sensores de aniões

A presente dissertação descreve, essencialmente, o desenvolvimento de novos métodos de funcionalização de calix[4]pirróis. O uso desses calix[4]pirróis, bem como o de porfirinas e ftalocianinas, como sensores de aniões, incluindo a determinação das suas constantes de afinidade é igualmente discutido. Esta dissertação encontra-se dividida em três partes distintas. Na primeira é feita uma revisão bibliográfica acerca das metodologias de síntese dos calix[4]pirróis, bem como das suas características e aplicações. A segunda parte encontra-se subdividida em diversos pontos de acordo com o tipo de funcionalização realizada nos calix[4]pirróis. No primeiro ponto desta parte encontram-se discutidos a síntese e a caracterização do mesooctametilcalix[ 4]pirrol-2-carbaldeído e do 3-(meso-octametilcalix[4]pirrol-2- il)propenal bem como os resultados obtidos da funcionalização destes aldeídos por reacções de cicloadição 1,3-dipolar. Esses aldeídos foram usados para gerar iletos de azometino, os quais foram “apanhados” com diversos dipolarófilos, tais como o fumaronitrilo, o fumarato de dimetilo, a N-(4- metoxifenil)maleimida, a 1,4-benzoquinona e a 1,4-naftoquinona. Ambos os calixpirróis com grupo formilo deram origem a aductos de cicloadição 1,3- dipolar com rendimentos moderados ou bons, principalmente quando se utilizou fumaronitrilo, fumarato de dimetilo ou N-(4-metoxifenil)maleimida como dipolarófilos. Neste estudo verificou-se que quando as quinonas eram utilizadas como dipolarófilos apenas eram obtidos os cicloaductos do 3-(mesooctametilcalix[ 4]pirrol-2-il)propenal. No segundo ponto descrevem-se as reacções de condensação aldólica e de Knoevenagel do mesooctametilcalix[ 4]pirrol-2-carbaldeído e do 3-(meso-octametilcalix[4]pirrol-2- il)propenal. Verificou-se a ausência de resultados para as reacções de condensação aldólica mas resultados muito satisfatórios para as reacções de Knoevenagel. Foram utilizados como compostos metilénicos activados a indano-1,3-diona, o 1,3-bis(dicianometilideno)indeno, o malononitrilo, o cianoacetato de etilo, o malonato de dietilo e o ácido de Meldrum. No penúltimo ponto encontram-se discutidas as reacções dos dois aldeídos com aminas bem como a sua redução e posterior tentativa de funcionalização dos calixpirróis com grupo hidroxilo. Em ambas as tentativas os resultados foram pouco satisfatórios. No último ponto da segunda parte descrevem-se, pormenorizadamente, os métodos de síntese, purificação e caracterização estrutural dos diversos compostos sintetizados. Na terceira parte são descritos os testes dos novos calix[4]pirróis sintetizados e também de outros derivados tetrapirrólicos, nomeadamente porfirinas e ftalocianinas, com aniões. Os calix[4]pirróis sintetizados demonstraram capacidade de interagir com diferentes aniões, e a sua capacidade de interacção é dependente dos grupos funcionais introduzidos. Verificou-se que os compostos com grupos ciano conjugados com um anel pirrólico do macrociclo apresentam constantes de afinidade mais elevadas para os aniões. A concluir esta dissertação encontra-se uma revisão da literatura sobre a utilização de porfirinas como sensores de aniões. Apresentam-se também os resultados obtidos com duas porfirinas e uma ftalocianina em tal aplicação. As porfirinas testadas apresentam elevadas constantes de afinidade com os iões fluoreto e di-hidrogenofosfato. No caso da ftalocianina verificou-se que esta interage com vários aniões, bem como com metanol e sulfóxido dimetílico, originando soluções de cores muito diferentes.