Semi-selective culture medium for Exserohilum turcicum isolation from corn seeds

Northern corn leaf blight, caused by Exserohilum turcicum (Et), is a disease of widespread occurrence in regions where corn, sweetcorn and popcorn are grown. This disease has great potential to cause damage and has been studied for years, but the association of its causal agent with seeds remains unconfirmed. Thus, the availability of a sensitive method to detect and quantify the inoculum in seeds, even at low incidence, is essential. The aim of this study was to develop a method to detect and quantify the presence of the fungus infecting and infesting corn and popcorn seeds. Artificially and naturally infected seeds were employed to develop the medium. The semi-selective medium was composed of carbendazim (active ingredient) (60 mg/L), captan (30 mg/L), streptomycin sulfate (500 mg/L) and neomycin sulfate (600 mg/L) aggregated to the medium lactose casein hydrolysate agar medium. By using this, Et was detected in naturally infected corn seeds, showing 0.124% incidence, in four out of ten analyzed samples. In addition, 1.04 conidia were detected per infested seed. By means of isolation, pathogenicity test, morphological characterization and comparison with descriptions of the species in the literature, the fungus isolated from the seeds was confirmed to be Et. Both infection and infestation were considered low; thus, for studies of Et detection in corn seeds, the use of semi-selective medium and more than 1,200 seeds/sample is suggested.

Meios de cultura semi-seletivos para Macrophomina phaseolina

Macrophomina phaseolina (Tassi) Golidanich é um fungo habitante do solo importante economicamente devido ao amplo número de espécies de plantas que infectam e da dificuldade do seu controle. Vários estudos envolvendo densidade de inóculo, taxonomia, sobrevivência, necessitam de meios de cultura seletivo ou semi-seletivo. O objetivo do trabalho foi avaliar 16 meios de cultura quanto à especificidade a este patógeno, proporcionando maior porcentagem de detecção do seu crescimento e menor número de contaminações, para substituir o meio semi-seletivo RB modificado, rotineiramente utilizado em estudos deste patógeno. O meio semi-seletivo RB modificado é bastante eficiente e contém em sua composição o fungicida metalaxyl (inibidor de oomycetos), que atualmente não se encontra disponível comercialmente em formulação simples, sem adição do Mancozeb ou Clorotalonil que inibem o crescimento do fungo M. phaseolina. Os meios de cultura avaliados foram repicados com o inóculo do fungo produzido em substrato areno-orgânico, contido em bolsas de náilon, recuperados após 30 dias de um solo não autoclavado, contido em uma bandeja. Cada meio de cultura avaliado tiveram 7 repetições, representadas por uma placa de Petri. Para as comparações das médias das porcentagens do crescimento de M. phaseolina e do número de contaminantes foi utilizado o teste de Scott-knott a 5% de probabilidade e os valores em porcentagem foram transformados em arc sem (√/100). Dentre os meios de cultura avaliados os MSTP 1 [(BDA com tetraciclina 50 mg.L-1 mais propamocarb a 1 mL.L-1(Previcur N® 72,2% p.a.)], MSRP 0,5 (BDA com rifampicina 100 mg.L-1 mais fungicida propamocarb a 0,5 mL.L-1) e MSRP 1 (BDA com rifampicina 100 mg.L-1 mais fungicida propamocarb a 1 mL.L-1) proporcionaram maior porcentagem e detecção do fungo M. phaseolina e menor número de contaminações por outros fungos e bactérias. Estes meios de cultura semi-seletivos podem ser utilizados em futuros trabalhos visando estudos epidemiológicos e de medidas de controle do fungo M. phaseolina.

Biocontrol of Sclerotinia sclerotiorum and white mold of soybean using saprobic fungi from semi-arid areas of Northeastern Brazil

ABSTRACTThe incidence and the levels of yield loss caused by the white mold of soybean (caused by the fungus Sclerotinia sclerotiorum) have increased in areas of higher altitude at Cerrado and Southern Brazil, causing yield losses of up to 60%. The aim of this study was to select saprobic fungi with the potential to control the white mold of soybean. First, in vitroantagonism screening was carried out to test eight saprobic fungi against S. sclerotiorum. Assessment of S. sclerotiorum mycelial growth was done at four and seven days after its placement on the culture medium. The isolate showing greatest antagonistic effect in all tests/assessments was Myrothecium sp. An in vivo experiment was conducted in a greenhouse and growth chamber, where plants previously treated with eight saprobic fungi were artificially inoculated with S. sclerotiorum. The fungal culture medium (potato-dextrose) and the commercial resistance inducer acibenzolar-S-methyl were used as controls. In the in vivotests, severity of the white mold was assessed at 8, 14 and 21 days after inoculation. The highest reduction percentage in the lesion length was observed for the treatment with Myrothecium sp. (70%), which has the greater potential to be used as biocontrol agent of soybean under the conditions of this experiment.

Complexity Optimization in Product Development with Modularization

A company’s competence to manage its product portfolio complexity is becoming critically important in the rapidly changing business environment. The continuous evolvement of customer needs, the competitive market environment and internal product development lead to increasing complexity in product portfolios. The companies that manage the complexity in product development are more profitable in the long run. The complexity derives from product development and management processes where the new product variant development is not managed efficiently. Complexity is managed with modularization which is a method that divides the product structure into modules. In modularization, it is essential to take into account the trade-off between the perceived customer value and the module or component commonality across the products. Another goal is to enable the product configuration to be more flexible. The benefits are achieved through optimizing complexity in module offering and deriving the new product variants more flexibly and accurately. The developed modularization process includes the process steps for preparation, mapping the current situation, the creation of a modular strategy and implementing the strategy. Also the organization and support systems have to be adapted to follow-up targets and to execute modularization in practice.

Estrutura genética espacial de duas populações naturais de Myracrodruon urundeuva M. Allemão na região semi-árida, Brasil

Para determinar se a distribuição espacial dos genótipos é aleatória ou se está estruturada, utilizou-se a autocorrelação espacial dos genótipos para investigar dados alozímicos de duas populações naturais de Myracrodruon urundeuva do semi-árido brasileiro (Estação Ecológica do Seridó/RN, com 1.166,38/ha e Sítio Mata dos Alves/PB com 84/ha). A primeira população encontra-se em áreas mais preservadas, enquanto a segunda está em uma área fragmentada. O programa utilizado foi o "Autocorr". A autocorrelação estimada para os locos polimórficos foi realizada nos indivíduos adultos. Foram analisados dois alelos na Estação Ecológica do Seridó e quatro no Sítio Mata dos Alves. Utilizaram-se de três métodos para o pareamento de indivíduos a serem comparados: conexão de Gabriel (Ig), vizinho mais próximo (Ivmp) e comparações dentro de classes de distâncias preestabelecidas. Os resultados obtidos para Ig e Ivmp (Pgm-2: 0,032 e 0,236; Est-1: 0,263 e 0,242, respectivamente) na estação ecológica e Ig e Ivmp (Pgm-1: -0,349 e -0,288; Pgm-2: -0,341 e-0,278; Est-1: -0,349 e -0,284 e Mdh-1: -0,345 e 0,282, respectivamente) no sítio não mostraram a presença de estruturação genética espacial, o que possibilita pressupor que exista uma distribuição aleatória dos genótipos dentro delas. O mesmo foi detectado para as comparações dentro de classes de distâncias preestabelecidas. Os resultados mantiveram o mesmo padrão encontrado para algumas populações naturais de espécies arbóreas tropicais já estudadas.

The Role of Tactical Marketing Decisions on New Product Performance: The Moderating Effect of Entry Timing

This study focuses on observing how Finnish companies execute their new product launch processes. The main objective was to find out how entry timing moderates the relationship between launch tactics (namely product innovativeness, price and emotional advertising) and new product performance (namely sales volume and customer profitability). The empirical analysis was based on data collected in Lappeenranta University of Technology. The sample consisted of Finnish companies representing different industries and innovation activities. Altogether 272 usable responses were received representing a response rate of 37.67%. The measures were first assessed by using exploratory factor analysis (EFA) in PASW Statistics 18 and then further verified with confirmatory factor analysis (CFA) in LISREL 8.80. To test the hypotheses of the moderating effects of entry timing, hierarchical regression analysis was used in PASW Statistics 18. The results of the study revealed that the effect of product innovativeness on new product sales volume is dependent on entry timing. This implies that companies should carefully consider what would be the best time for entering the market when launching highly innovative new products. The results also depict a positive relationship between emotional advertising and new product sales volume. In addition, partial support was found for a positive relationship between pricing and new product customer profitability.

Measuring Processes of a New Packaging Solutions with the Balanced Scorecard, case DigiCup

The aim of this study was to create a Balanced Scorecard to the DigiCup solution. The first goal was to create process descriptions to the few critical processes. The second goal was to define appropriate measurements, according to customer survey as well as following the Balanced Scorecard process description, to manage the critical success factors. The overall goal of this study was to create a performance measurement system for the solution which guides the operation towards continuous improvement. This study was conducted by using both qualitative and quantitative methods, and the analysis was done by using a case study method. The material was gathered from the current customers, the management and the employees using structured, semi-structured and open group and individual interviews. The current customers were divided into retailers and direct customers of the DigiCup solution. The questions which the customers were asked were related to the information about interviewee, company, business strategy, market, satisfaction survey and future requirements. The management defined the strategy and took part in specifying the perspectives, objectives and measurements to the Balanced Scorecard of the DigiCup solution. The employees participated into the choosing of the metrics. The material consisted from altogether sixteen interviews. At the beginning of the study the product development, the order-delivery as well as the printing processes was chosen to be the critical processes of the DigiCup solution. These processes were concentrated on already in the literature review while trying to find the characteristics of these processes as well as the critical success factors and the appropriate measurements, which could be utilized when creating the Balanced Scorecard to the DigiCup solution according to the customer survey. The appropriate perspectives, objectives and measurements were found to the DigiCup solution. The chosen measures works as a basis for the development of IT-reporting tool. As a conclusion it can be stated that when discussing a new business, where the objectives are changing according to which development’s phases the company is in, the measurement should be updated often enough.

Integrating environmental aspects into product development process

Various regulations and customer requirements have made it necessary for Vacon Oyj to pay more attention to the environmental aspects in its processes. The main purpose of this master’s thesis project is to define how environmental aspects could be integrated into Vacon’s product development process. The aim is to find out the most important environmental aspects for the company to address, to examine how these could be taken into account during the development process and to map the critical factors that need consideration in order to ensure the successful integration of environmental aspects into the design process. Based on the customer requirements and evolving regulations the most important aspects for Vacon include minimizing the amount of harmful substances, improving the recyclability and energy efficiency of the product and moreover providing meaningful information related to these aspects. To tackle these issues, a new DfE process was developed, tasks in each phase were described and responsibilities were indicated. To ensure the success of the DfE process, management commitment, support of other processes and significant improvements in ways the information is managed are required. The developers should be provided with training and support. Environmental expertise and knowledge in-house should be developed and establishing meaningful environmental indicators is suggested.

Chlorophyll fluorescence of tropical tree species in a semi-deciduous forest gap

The characterization of different ecological groups in a forest formation/succession is unclear. To better define the different successional classes, we have to consider ecophysiological aspects, such as the capacity to use or dissipate the light energy available. The main objective of this work was to assess the chlorophyll fluorescence emission of tropical tree species growing in a gap of a semi-deciduous forest. Three species of different ecological groups were selected: Croton floribundus Spreng. (pioneer, P), Astronium graveolens Jacq. (early secondary, Si), and Esenbeckia febrifuga A. Juss. (late secondary, St). The potential (Fv/Fm) and effective (deltaF/Fm') quantum efficiency of photosystem II, apparent electron transport rate (ETR), non-photochemical (qN) and photochemical (qP) quenching of fluorescence were evaluated, using a modulated fluorometer, between 7:30 and 11:00 h. Values of Fv/Fm remained constant in St, decreasing in P and Si after 9:30 h, indicating the occurrence of photoinhibition. Concerning the measurements taken under light conditions (deltaF/Fm', ETR, qP and qN), P and Si showed better photochemical performance, i.e., values of deltaF/Fm', ETR and qP were higher than St when light intensity was increased. Values of qN indicated that P and Si had an increasing tendency of dissipating the excess of energy absorbed by the leaf, whereas the opposite was found for St. The principal component analysis (PCA), considering all evaluated parameters, showed a clear distinction between St, P and Si, with P and Si being closer. The PCA results suggest that chlorophyll fluorescence may be a potential tool to differentiate tree species from distinct successional groups.

Resistência natural de nove madeiras do semi-árido brasileiro a fungos xilófagos em condições de laboratório

Objetivou-se avaliar a resistência natural de nove madeiras do semi-árido brasileiro a fungos xilófagos, em condições de laboratório. As madeiras estudadas foram a algaroba (Prosopis juliflora), o angico (Anadenanthera macrocarpa), a aroeira (Myracrodruon urundeuva), a braúna (Schinopsis brasiliensis), a cássia (Senna siamea), a craibeira (Tabebuia aurea), o cumaru (Amburana cearensis), o ipê (Tabebuia impetiginosa) e o pereiro (Aspidosperma pyrifolium). De cada espécie foram retirados corpos-de-prova de 2,54 x 2,00 x 1,00 cm, com a maior dimensão na direção das fibras, em quatro posições na direção medula-casca. As amostras foram submetidas, por 14 semanas, à ação dos fungos Postia placenta e Neolentinus lepideus. A resistência natural, com exceção da algaroba e do angico (P. placenta), da craibeira (N. lepideus) e da cássia (P. placenta e N. lepideus), foi afetada pela posição na direção medula-casca, sem estar relacionada à densidade das madeiras ensaiadas. A madeira de ipê e a madeira de cerne da aroeira e braúna foram as mais resistentes aos fungos testados. As diferenças entre a resistência natural, exceto para a aroeira e braúna, não estavam associadas à concentração de extrativos solúveis em água quente.

Resistência natural de nove madeiras do semi-árido brasileiro a fungos causadores da podridão-mole

O objetivo desta pesquisa foi avaliar a resistência de nove madeiras de ocorrência no semi-árido brasileiro a fungos de podridão-mole, em condições de laboratório. As madeiras estudadas foram algaroba (Prosopis juliflora), angico (Anadenanthera colubrina var. cebil), aroeira (Myracrodruon urundeuva), braúna (Schinopsis brasiliensis), cássia (Senna siamea), craibeira (Tabebuia aurea), cumaru (Amburana cearensis), pau-d'arco (Tabebuia impetiginosa) e pereiro (Aspidosperma pyrifolium). De cada espécie foram retirados corpos-de-prova de 3,0 x 1,5 x 0,5 cm, com a maior dimensão no sentido das fibras, em quatro posições na direção medula-casca do tronco. As amostras permaneceram por 120 dias sob a ação da microflora natural existente em solo orgânico. A resistência ao apodrecimento da aroeira, braúna e cássia não foi afetada pela posição na direção medula-casca, não esteve relacionada à densidade das madeiras ensaiadas. As madeiras de aroeira e braúna (cerne), pereiro e pau-d'arco apresentaram melhor desempenho. A resistência natural não esteve associada à concentração de extrativos solúveis em água quente.

Impactos de sistemas agroflorestais e convencional sobre a qualidade do solo no semi-árido cearense

Os benefícios gerados pelos sistemas agroflorestais (SAFs) ao ambiente são comprovados nas mais diversas regiões do mundo. No entanto, na região semi-árida cearense, são poucos os trabalhos desenvolvidos englobando as vantagens atribuídas a este tipo de sistema quanto ao uso do solo. Objetivou-se avaliar o impacto de quatro SAFs e um convencional sobre a qualidade do solo, comparativamente à condição natural (caatinga nativa), após cinco anos de uso na região semi-árida cearense. Os tratamentos testados foram: agrossilvipastoril (AGP); silvipastoril (SILV); tradicional cultivado em 1998 e 1999 (TR98); tradicional cultivado em 2002 (TR02); e cultivo intensivo (CI) e duas áreas de mata nativa (MN-1 e MN-2), que foram usadas como referência de um estado de equilíbrio. O impacto dos sistemas de manejo sobre a qualidade do solo foi medido pelas seguintes variáveis: a granulometria; argila dispersa; a estabilidade e distribuição porcentual dos agregados; os teores de Ca2+, Mg2+, K+, Na+ trocáveis; a acidez potencial; o pH do solo; e o teor de carbono orgânico total (COT), considerando-se as profundidades de 0-6, 6-12, 12-20 e 20-40 cm. Os tratamentos AGP, TR98 e CI promoveram maior revolvimento do solo provocando a redução nos teores de COT. Os atributos químicos, como bases trocáveis, capacidade de troca catiônica, pH e acidez potencial nos tratamentos SILV e MN-2, variaram em função dos teores de argila, enquanto nos tratamentos TR98 e CI a redução nesses atributos foi devido ao maior revolvimento do solo. O tratamento AGP mostrou-se eficiente na ciclagem de nutrientes, entretanto, o revolvimento do solo e a concomitante redução do teor de COT, geraram também diminuição na estabilidade de agregados. Os resultados obtidos permitem recomendar o tratamento SILV para a manutenção da qualidade do solo e produção de alimentos na região do semi-árido cearense.

Kuivatuotetoimitusketjun kehittäminen

Diplomityön tarkoituksena on selvittää kuivatuotetoimitusketjun haasteet ja kehittää toimintaan parannuskeinoja. Kuivatuotetoimitusketjun kehittämisessä pyritään varmistamaan tärkeimpien asiakkaiden tilauksien toimitusvarmuus sekä parantamaan asiakkailta saatavaa kysyntätietoa. Näistä kahdesta osa-alueesta muodostuu kokonaisuus, jonka avulla parannetaan toimitusketjun suorituskykyä. Työn tuloksena kysynnän ennustettavuutta kehitetään lähtötilanteesta toteutetulla kysyntäennustelomakkeella, jonka avulla kerätään tietoa tärkeimpien asiakkaiden tulevasta kysynnästä. Analyyseissä valmisvarastoille määritetään optimitasot, jolloin materiaalinohjausta voidaan hallita systemaattisemmin. Laskelmien yksityiskohtaisia tuloksia ei sisällytetä työhön. Työssä tarkastellaan myös varastotilan riittävyyttä sekä vaihtoehtoja kapasiteetin lisäämiseksi.

Produção e distribuição de biomassa de espécies arbóreas no semi-árido brasileiro

Com o objetivo de avaliar a produção e distribuição de biomassa de algumas espécies arbóreas de múltiplo uso em condições de sequeiro do submédio do São Francisco, instalou-se um experimento no Campo Experimental da Caatinga da Embrapa Semi-Árido, Município de Petrolina, PE. Foram realizadas medições de altura e diâmetro à altura do peito (DAP) de 16 árvores centrais, em três parcelas de cada espécie: Leucaena diversifolia, Caesalpinia velutina, Caesalpinia coriaria, Mimosa tenuiflora e Ateleia herbert-smithii. A biomassa foi estimada com base na árvore de altura média de cada parcela, avaliando-se, separadamente, cada componente (folhas, galhos, cascas e lenho). A biomassa nos diferentes componentes arbóreos das espécies foi distribuída na seguinte ordem: folha

Recovery and refining of manganese as by-product from hydrometallurgical processes

The consumption of manganese is increasing, but huge amounts of manganese still end up in waste in hydrometallurgical processes. The recovery of manganese from multi-metal solutions at low concentrations may not be economical. In addition, poor iron control typically prevents the production of high purity manganese. Separation of iron from manganese can be done with chemical precipitation or solvent extraction methods. Combined carbonate precipitation with air oxidation is a feasible method to separate iron and manganese due to the fast kinetics, good controllability and economical reagents. In addition the leaching of manganese carbonate is easier and less acid consuming than that of hydroxide or sulfide precipitates. Selective iron removal with great efficiency from MnSO4 solution is achieved by combined oxygen or air oxidation and CaCO3 precipitation at pH > 5.8 and at a redox potential of > 200 mV. In order to avoid gypsum formation, soda ash should be used instead of limestone. In such case, however, extra attention needs to be paid on the reagents mole ratios in order to avoid manganese coprecipitation. After iron removal, pure MnSO4 solution was obtained by solvent extraction using organophosphorus reagents, di-(2-ethylhexyl)phosphoric acid (D2EHPA) and bis(2,4,4- trimethylpentyl)phosphinic acid (CYANEX 272). The Mn/Ca and Mn/Mg selectivities can be increased by decreasing the temperature from the commonly used temperatures (40 –60oC) to 5oC. The extraction order of D2EHPA (Ca before Mn) at low temperature remains unchanged but the lowering of temperature causes an increase in viscosity and slower phase separation. Of these regents, CYANEX 272 is selective for Mn over Ca and, therefore, it would be the better choice if there is Ca present in solution. A three-stage Mn extraction followed by a two-stage scrubbing and two-stage sulfuric acid stripping is an effective method of producing a very pure MnSO4 intermediate solution for further processing. From the intermediate MnSO4 some special Mn- products for ion exchange applications were synthesized and studied. Three types of octahedrally coordinated manganese oxide materials as an alternative final product for manganese were chosen for synthesis: layer structured Nabirnessite, tunnel structured Mg-todorokite and K-kryptomelane. As an alternative source of pure MnSO4 intermediate, kryptomelane was synthesized by using a synthetic hydrometallurgical tailings. The results show that the studied OMS materials adsorb selectively Cu, Ni, Cd and K in the presence of Ca and Mg. It was also found that the exchange rates were reasonably high due to the small particle dimensions. Materials are stable in the studied conditions and their maximum Cu uptake capacity was 1.3 mmol/g. Competitive uptake of metals and acid was studied using equilibrium, batch kinetic and fixed-bed measurements. The experimental data was correlated with a dynamic model, which also accounts for the dissolution of the framework manganese. Manganese oxide micro-crystals were also bound onto silica to prepare a composite material having a particle size large enough to be used in column separation experiments. The MnOx/SiO2 ratio was found to affect significantly the properties of the composite. The higher the ratio, the lower is the specific surface area, the pore volume and the pore size. On the other hand, higher amount of silica binder gives composites better mechanical properties. Birnesite and todorokite can be aggregated successfully with colloidal silica at pH 4 and with MnO2/SiO2 weight ratio of 0.7. The best gelation and drying temperature was 110oC and sufficiently strong composites were obtained by additional heat-treatment at 250oC for 2 h. The results show that silica–supported MnO2 materials can be utilized to separate copper from nickel and cadmium. The behavior of the composites can be explained reasonably well with the presented model and the parameters estimated from the data of the unsupported oxides. The metal uptake capacities of the prepared materials were quite small. For example, the final copper loading was 0.14 mmol/gMnO2. According to the results the special MnO2 materials are potential for a specific environmental application to uptake harmful metal ions.