The storage of red snapper (Lutjanus spp.) in ice, chilled sea water and chilled fresh water

The results are given of trials conducted to determine the effect on quality of holding fish (Lutjanus species) in chilled freshwater and also to compare the quality loss of fish stored in chilled seawater and chilled freshwater and in ice. No adverse effects were observed when storing in chilled freshwater apart from loss of external appearance after 6 days storage; taste panel tests showed acceptable conditions up to 15 days. Chilled seawater is unsuitable for storage as it spoils the intake of salt from the medium, making the flesh unpalatable.

Genetic diversity and population history of the red panda (Ailurus fulgens) as inferred from mitochondrial DNA sequence variations

The red panda (Ailurus fulgens) is one of the flagship species in worldwide conservation and is of special interest in evolutionary studies due to its taxonomic uniqueness. We sequenced a 236-bp fragment of the mitochondrial D-loop region in a sample of 5

Fibre optics monitoring of clay cuttings and embankments along London's ring motorway

Although a wide range of techniques exist for slope monitoring, the task of monitoring slopes is sometimes complicated by the extensive nature and unpredictability of slope movements. The Brillouin optical time-domain reflectometer (BOTDR) is a distributed optical fiber strain measurement technology utilising Brillouin scattering. This method measures continuous strain along a standard optical fibre over a distance up to 10 km and hence has potential to detect deformations and diagnose problems along large sections of slopes and embankments. This paper reports the demonstration of BOTDR method for monitoring surface ground movements of clay cuttings and embankments along London's ring M25 motorway. A field trial investigating varying methods of onsite fibre optic installations was conducted. The surrounding ground was artificially moved by excavating a 3 m deep trench perpendicular to the instrumented sections. Results obtained from onsite installations after slope movement demonstrate a half-pipe covered fibre optic installed on wide (200mm) Tensar ™SS20 geogrid gives the most consistent recorded strain change profile. Initial conclusions suggest this method best represents induced ground motion at the surface and hence is recommended for implementation in future sitework. Copyright ASCE 2008.

Red-Green-Blue 2D tuneable liquid crystal laser devices

In this paper, we review our recent experimental work on coherent and blue phase liquid crystal lasers.We will present results on thin-film photonic band edge lasing devices using dye-doped low molar mass liquid crystals in self-organised chiral nematic and blue phases. We show that high Q-factor lasers can be achieved in these materials and demonstrate that a single mode output with a very narrow line width can be readily achievable in well-aligned mono-domain samples. Further, we have found that the performance of the laser, i.e. the slope efficiency and the excitation threshold, are dependent upon the physical parameters of the low molar mass chiral nematic liquid crystals. Specifically, slope efficiencies greater than 60% could be achieved depending upon the materials used and the device geometry employed. We will discuss the important parameters of the liquid crystal host/dye guest materials and device configuration that are needed to achieve such high slope efficiencies. Further we demonstrate how the wavelength of the laser can be tuned using an in-plane electric field in a direction perpendicular to the helix axis via a flexoelectric mechanism as well as thermally using thermochromic effects. We will then briefly outline data on room temperature blue phase lasers and further show how liquid crystal/lenslet arrays have been used to demonstrate 2D laser emission of any desired wavelength. Finally, we present preliminary data on LED/incoherent pumping of RG liquid crystal lasers leading to a continuous wave output. © 2009 SPIE.

Sources of the deep water masses in the northern Red Sea

The hydrographic structure of the northern Red Sea indicated that, the surface waters of temperature around 22°C, salinity of 40.1OO%o and dt = 28.1 might sink to depths between 400-500 m by convective overturn, contributing to the formation of the mid-deep Red Sea waters. Below the 500 db depth down to the bottom the water column is stable. The geostrophic circulation clearly indicated an inflow of water from the Red Sea towards NNW, along the main axis of the sea. Arriving at the northern edge of the sea, it sends a branch in the Gulf of Aqaba, turns to the west, and sends another branch to the Gulf of Suez, but its main mass reaches the African coast where it sets southward along this coast. A large cyclonic gyre centered near 27 deg 30'N and 34 deg l0'E is detected at the head of the Red Sea deep waters. The effect of the outflow of the bottom water of the Gulf of Suez on the formation of the deep water of the Red Sea is limited.

A taxonomic study of some red algae commonly growing on the coast of Karachi

Eighteen commonly occurring species of marine benthic red algae, i.e., Asparagopsis taxiformis (Delile) Trevisan, Bangia atropurpurea (Roth) C. Agardh, Centroceras clavulatum (C. Agardh) Montagne, Calliblepharis fimbriata (Greville) Kiitzing, Coelarthrum muelleri (Sonder) B¢rgesen, Cottoniella filamentosa (Howe) B¢rgesen, Gracilariafoliifera (Forsskai) B¢rgesen, Halymenia porphyraeformis (B¢rgesen) Parkinson, Hypnea muscifor:mis (Wulfen) Lamouroux, Hypnea valentiae (Turner) Montagne, Laurencia obtusa (Hudson) Lamouroux, Me!anothamnus somalensis Bomet et Falkenberg, Porphyra vietnamensis Tanaka et Pham-hoang H6, Sarconema filiforme (Sonder) Kylin, Sebdenia flabellata (J. Agardh) Parkinson, Scinaia fascicularis (B¢rgesen) Huisman, Scinaia hatei B¢rgesen, and Solieria robusta (Greville) Kylin were collected from coastal areas near Karachi (Pakistan) and taxonomically investigated. All the investigated seaweeds are taxonomically known species. During this study, Melanothamnus somalensis is reported for the first time from northern Arabian Sea and Asparagopsis taxiformis, Bangia atropurpurea, Cottoniella filamentosa, Gracilaria foliifera, Halymenia porphyraeformis, Melanothamnus somalensis, Sarconema filiforme, Sebdenia flabellata, Scinaia fascicularis, and Solieria robusta are taxonomically described for the first time from the coast of Pakistan.

Analysis of case histories on deep excavations in marine clay

Two case histories on deep excavation of marine clay are used to study the use of a decision-making tool based on a new deign method called the Mobilized Strength Design (MSD) method which allows the designer to use a simple method of predicting ground displacements during deep excavation. This application can approximately satisfy both safety and serviceability requirements by predicting stresses and displacements under working conditions by introducing the concept of "Mobilizable soil strength". The new method accommodates a number of features which are important to design of underground construction between retaining walls, including different deformation mechanism in different stages of excavation. The influence of wall depth, wall flexibility and stratified ground are the major focus of this paper. These developments should make it possible for a design engineer to take informed decisions on the influence of wall stiffness, or on the need for a jet-grouted base slab, for example, without having to conduct project-specific Finite Element Analysis.

Antimicrobial peptides from skin secretions of Chinese red belly toad Bombina maxima

Two groups of antimicrobial peptides have been isolated from skin secretions of Bombina maxima. Peptides in the first group, named maximins 1, 2, 3, 4 and 5, are structurally related to bombinin-like peptides (BLPs). Unlike BLPs, sequence variations in maximins occurred all through the molecules. In addition to the potent antimicrobial activity, cytotoxicity against tumor cells and spermicidal action of maximins, maximin 3 possessed a significant anti-HIV activity. Maximins 1 and 3 were toxic to mice with LD50 values of 8.2 and 4.3 mg/kg, respectively. Peptides in the second group, termed maximins H1, H2, H3 and H4, are homologous with bombinin H peptides. cDNA sequences revealed that one maximin peptide plus one maximin H peptide derived from a common larger protein. (C) 2002 Elsevier Science Inc. All rights reserved.

Identification and cloning of a trypsin inhibitor from skin secretions of Chinese red-belly toad Bombina maxima

A novel trypsin inhibitor was identified and purified from skin secretions of Chinese red-belly toad Bombina maxima. The partial N-terminal 29 amino acid residues of the peptide, named BMTI, were determined by automated Edman degradation. This allowed the cloning of a full-length cDNA encoding BMTI from a cDNA library prepared from the toad skin. The deduced complete amino acid sequence of BMTI indicates that mature BMTI is composed of 60 amino acids. A FASTA search in the databanks revealed that BMTI exhibits 81.7% sequence identity with BSTI, a trypsin/thrombin inhibitor from European toad Bombina bombina skin secretions. Sequence differences between BMTI and BSTI were due to 11 substitutions at positions 2, 9, 25, 27, 36-37, 39, 41-42, 50 and 56. BMTI potently inhibited trypsin with a K-i value of 0.06 muM, similar to that of BSTI. However, unlike BSTI, which also inhibited thrombin with a K-i value of 1 muM, no inhibitory effect of BMTI on thrombin was observed under the assay conditions. (C) 2002 Elsevier Science Inc. All rights reserved.

Supporting excavations in clay - From analysis to decision-making

Finite Element Analysis (FEA) is used to calibrate a decision-making tool based on an extension of the Mobilized Strength Design (MSD) method which permits the designer an extremely simple method of predicting ground displacements during construction. This newly extended MSD approach accommodates a number of issues which are important in underground construction between in-situ walls, including: alternative base heave mechanisms suitable either for wide excavations in relatively shallow soft clay strata, or narrow excavations in relatively deep soft strata; the influence of support system stiffness in relation to the sequence of propping of the wall; and the capability of dealing with stratified ground. These developments should make it possible for a design engineer to take informed decisions on the relationship between prop spacing and ground movements, or the influence of wall stiffness, or on the need for and influence of a jet-grouted base slab, for example, without having to conduct project-specific FEA. © 2009 Taylor & Francis Group.

Red and white meat of tuna (Euthynnus affinis): their biochemical role and nutritional quality

The biochemical and nutrient compositions of red and white meat of tuna are reported. Based on the data the biochemical role and nutritional quality of red and white meat are discussed. The results show that red meat is adapted for slow and continuous activity and white meat for quick but occasional activity. In spite of comparatively low lysine content the red meat is adjudged more nutritious than white meat.

Biochemical differences between the red and white meat of tuna and changes in quality during freezing and storage

The differences between the white and red (dark) meat of tuna (Katsuwonus pelamis) in chemical, physical and organoleptic aspects and the rate and pattern of spoilage during freezing and subsequent storage are discussed in this communication. In the indices studied distinct difference is seen between the white and red meat as well as in the head, middle and tail portions of the same fish. The characteristic colour of tuna meat is due to the presence of haemoglobin and myoglobin, the concentrations of which are about 5 times more in red meat than in white meat. The shelf-life of the frozen material varies with the type of the pack, that is, whole fish>chunks>fillets; the fillets being adversely affected during frozen storage.

Suitability of tuna red meat for preparation of wafers

Studies to find out the suitability of tuna red meat for preparation of wafers have indicated that the red meat as such is not a good raw material for the production of wafers. The wafers obtained had poor organoleptic quality and characteristic tuna red meat flavour unacceptable to consumers. Attempts to prepare the wafers with the red meat mixed with the meat of barracuda in varying proportions showed that the mixture of red meat and barracuda meat in the ratio 1:3 gives a product having excellent physical properties and good swelling characteristics. The overall organoleptic quality of these wafers was very much comparable to the wafers produced from other quality fish. Increasing the proportion of red meat not only affects the overall appearance of the product but a1so imparts the red meat taste to the product.

Influences of dietary lipid and phosphorus levels on retention and excretion of phosphorus and nitrogen in fingerlings red sea bream, Pagrus major

A laboratory based 2x3 factorial experiment was conducted for 12 weeks to investigate the influences of dietary lipid and phosphorus (P) levels on retention and excretion of phosphorus and nitrogen (N) in fingerling red sea bream. Two levels of lipid (210 and 260 g/kg) and three levels of phosphorus (17, 14 and 12 g/kgˉ¹) in the dry diets were tested. Duplicate groups of 25 red sea bream (average weight 3.74±0.07 g) per 60L glass tank were fed experimental diets three times a day near to satiation level at 22 to 28°C water temperature. A reduction in dietary fish meal from 500 to 300 g/kg dry diet, corresponding to a supplementation in both dietary lipid and P resulted in significant increase in both P and N retention which resulted in the reduction of their excretion by red sea bream. The overall results of the present study demonstrated that both lipid and phosphorus supplementation are necessary for developing less-polluting feed which in turn, reduce fish meal level in the diet of fingerling red sea bream. Further studies in this regard with different size and age groups of red sea bream are warranted.

Chemical forms of copper, zinc, lead and cadmium in sediments of the northern part of the Red Sea, Egypt

Total concentrations and chemical forms of heavy metals in sediment samples from the Gulf of Suez and the northern part of the Red Sea, collected during January 2003, were determined by atomic absorption spectrometry. Maximum concentrations of 49.56, 65.42, 33.52 and 3.52 µg/g were recorded for total Cu, Zn, Pb and Cd respectively at Adabiya location. These may reflect the high contribution of land-based activities in the northern part of the Gulf. Also, high percentages of heavy metals were found in the residual fraction (Cu=78.61, Zn=77.10 and Pb=66.80%) while a high percentage of Cd was found in the carbonate fraction (45.82%). However, few or negligible percentages were recorded in the exchangeable fractions (Cu=0.51, Zn=1.57 and Pb=1.74%). Concentration of Cd in the exchangeable fraction was too low to be detected.