Genetic variability of hull-less barley accessions based on molecular and quantitative data

The objective of this work was to characterize and quantify the genetic, molecular, and agronomic variability of hull-less barley genotypes, for the selection of parents and identification of genotypes adapted to the irrigated production system in the Brazilian Cerrado. Eighteen hull-less barley accessions were evaluated, and three covered barley accessions served as reference. The characterization was based on 157 RAPD molecular markers and ten agronomic traits. Genetic distance matrices were obtained based on molecular markers and quantitative traits. Graphic grouping and dispersion analyses were performed. Genetic, molecular, and agronomic variability was high among genotypes. Ethiopian accessions were genetically more similar, and the Brazilian ones were genetically more distant. For agronomic traits, two more consistent groupings were obtained, one with the most two-rowed materials, and the other with six-rowed materials. The more diverging materials were the two-rowed CI 13453, CN Cerrado 5, CN Cerrado 1, and CN Cerrado 2. The PI 356466, CN Cerrado 1, PI 370799, and CI 13453 genotypes show agronomic traits of interest and, as genetically different genotypes, they are indicated for crossing, in breeding programs.

A support system for evaluating a suitable joining method in the production of sheet metal goods

This report illustrates a comparative study of various joining methods involved in sheet metal production. In this report it shows the selection of joining methods, which includes comparing the advantages and disadvantages of a method over the other ones and choosing the best method for joining. On the basis of various joining process from references, a table is generated containing set of criterion that helps in evaluation of various sheet metal joining processes and in selecting the most suitable process for a particular product. Three products are selected and a comprehensive study of the joining methods is analyzed with the help of various parameters. The table thus is the main part of the analysis process of this study and can be advanced with the beneficial results. It helps in a better and easy understanding and comparing the various methods, which provides the foundation of this study and analysis. The suitability of the joining method for various types of cases of different sheet metal products can be tested with the help of this table. The sections of the created table display the requirements of manufacturing. The important factor has been considered and given focus in the table, as how the usage of these parameters is important in percentages according to particular or individual case. The analysis of the methods can be extended or altered by changing the parameters according to the constraint. The use of this table is demonstrated by pertaining the cases from sheet metal production.

Standardizing Customized Features of a Configurable Product

Työn päätavoitteena on arvioida hissien automaattiovien usein toistuvien asiakaskohtaisesti räätälöityjen tuoteominaisuuksien vakioimisen kannattavuutta KONEen Hyvinkään tehtaalla. Työssä arvioidaan myös massaräätälöinnin periaatteiden soveltuvuutta erikoisovien toimitusprosessiin sekä toimintoperusteisen kustannustiedon tarpeellisuutta tuoteominaisuuksia koskevien päätösten teossa. Asiakaskohtaisesti räätälöity ovituotanto jaettiin kategorioihin, joiden volyymeja ja tuotemuutosten tekoon käytettyjä suunnittelutuntimääriä analysoimalla selvitettiin, muodostaako jokin räätälöitävä tuoteominaisuus riittävän suuren kappalemääräisen kysynnän tai suunnittelutuntien kulutuskohteen, jotta ominaisuuden vakiointi olisi kannattavaa. Ovien kustannusrakenne-esimerkkien avulla selvitettiin myös suunnittelun osuus kokonaiskustannuksista. Analyysien perusteella todettiin asiakaskohtaisten muutosten olevan hajanaisia ja vain muutaman ominaisuuden osalta muodostuvan tarpeeksi suuri ja yhtenäinen kokonaisuus, joka olisi taloudellisesti kannattavaavakioida. Monimutkaisen tuoterakenteen vuoksi massaräätälöinnin opit eivät ole suoraan kopioitavissa hissien erikoisovien toimitusprosessiin, mutta sisältävät hyödyllisiä toimintamalleja prosessin kehittämiseen.

Tukki- ja parruoptimoinnintoimivuuden kehittäminen

Diplomityön tutkimusfunktio käsittelee toimeksiantajan, Stora Enso Timber Oy Ltd Kotkan sahan, sahalinjan optimointikokonaisuuden relevanttia ongelmakenttää. Tutkimuksen alussa profiloivan sahalinjan tukinpyörityksen, pelkan sivuttaissiirron tai sivulautaoptimoinnin toimivuudesta ei ollut varmuutta. Työn painopistealue on sivulautaoptimointi, jonka toimivuus tutkimuksen alussa on hyvin kyseenalaista tuotantoajossa. Työn tavoitteet kiteytyvät paremman raaka-aineen käyttösuhteen saavuttamiselle, jolloin pitkän aikajänteen kannattavuus on realistisempaa saavuttaa. Kotkan sahalinjan optimointijärjestelmässä on kokonaisuudessaan saavutettu tuotantoajoon hyväksyttävä taso. Tukinpyörityksen tarkkuudessa saavutettiin asetettu tavoite, eli 90 % pyöritystuloksista menee virheikkunaan ± 10° , sekä virheen keskiarvon itseisarvo jasen ympärillä olevan hajonnan summa on maksimissaan 10° . Pelkan sivuttaissiirto todettiin tutkimuksessa sekundääriseksi optimointijärjestelmäksi. Ohjaus perustuu tukkimittarin mittaamaan dataan, jolloin tukinpyörityksen hajonta aiheuttaa epätarkkuutta pelkan suuntauksessa. Pelkan sivuttaisiirron käyttäminen vaatii lisämittauksia, jolloin voidaan varmistua pelkan suuntauksen optimoinnin toimivuudesta. Sivulautaoptimoinnin toimivuuden kehittämisessä saavutettiin se taso, missä todellista kehitystyötä voidaan tehdä. Koeajoissa ja optimointiohjelman tarkastamisessa havaittiin periaatteellisia virheitä, jotka korjattiin. Toimivan sivulautaoptimoinnin myötä on mahdollista hallita paremmin tuotannonohjaus, jolloin tuotanto voidaan etenkin sivulautojen osalta kohdentaa paremmin vastaamaan kysyntää sekä asete-erän hyvää käyttösuhdetta. Raaka-aineen käyttösuhde on parantunut. Yksittäisten asetevertailujen sekä esimerkkilaskelmien perusteella tuottopotentiaali tukinpyörityksen ja sivulautaoptimoinnin osalta on 0,6...1,5 MEUR Välillinen tuottopotentiaali on suurempi, koska tuotantoprosessi sahauksen osalta on erittäin joustava markkinoiden tarpeen muutoksille. Sahalinjalla on mahdollista tuottaa helposti laajalla tukkisumalla laajaa tuotematriisia, jossa sivulautaoptimoinnilla on avainrooli. Tuotannonsuunnittelufunktiota tulee kehittää vastaamaan mahdollisuuksiin,joita sivulautaoptimointi tarjoaa. Tuotematriisi ja sitä vastaavat asetteet lankeavalla tukkisumalla tulee rakentaa uudestaan niiltä osin, joihin sivulautaoptimointi antaa variaatiomahdollisuuksia.

Using software metrics to increase efficiency in product creation

Opinnäytetyö etsii korrelaatiota ohjelmistomittauksella saavutettujen tulosten ja ohjelmasta löytyneiden virheiden väliltä. Työssä käytetään koeryhmänä jo olemassaolevia ohjelmistoja. Työ tutkii olisiko ohjelmistomittareita käyttämällä ollut mahdollista paikallistaa ohjelmistojen ongelmakohdat ja näin saada arvokasta tietoa ohjelmistokehitykseen. Mittausta voitaisiin käyttää resurssien parempaan kohdentamiseen koodikatselmuksissa, koodi-integraatiossa, systeemitestauksessa ja aikataulutuksessa. Mittaamisen avulla nämä tehtävät saisivat enemmän tietoa resurssien kohdistamiseen. Koeryhmänä käytetään erilaisia ohjelmistotuotteita. Yhteistä näille kaikille tuotteille on niiden peräkkäiset julkaisut. Uutta julkaisua tehtäessä, edellistä julkaisua käytetään pohjana, jonka päällekehitetään uutta lähdekoodia. Tämän takia ohjelmistomittauksessa pitää pystyä erottelemaan edellisen julkaisun lähdekoodi uudesta lähdekoodista. Työssä käytettävät ohjelmistomittarit ovat yleisiä ja ohjelmistotekniikassalaajasti käytettyjä mittaamaan erilaisia lähdekoodin ominaisuuksia, joiden arvellaan vaikuttavan virhealttiuteen. Tämän työn tarkoitus on tutkia näiden ohjelmistomittareiden käytettävyyttä koeryhmänä toimivissa ohjelmistoympäristöissä. Käytännön osuus työstä onnistui löytämään korrelaation joidenkinohjelmistomittareiden ja virheiden väliltä, samalla kuin toiset ohjelmistomittarit eivät antaneet vakuuttavia tuloksia. Ohjelmistomittareita käyttämällä näyttää olevan mahdollista tunnistaa virhealttiit kohdat ohjelmasta ja siten parantaa ohjelmistokehityksen tehokkuutta. Ohjelmistomittareiden käyttö tuotekehityksessäon perusteltavaa ja niiden avulla mahdollisesti pystyttäisiin vaikuttamaan ohjelmiston laatuun tulevissa julkaisuissa.

Elinkaarimallinnuksen periaatteisiin perustuva prosessimalli paperikoneelle

Pääoman tuottavuuden merkitys kasvaa metsäteollisuuden tuottavuuden ja kilpailukyvyn varmistamisessa.Tuottavuuteen vaikuttavat tuotannon määrä sekä tuotannosta saatava hinta johon osaltaan vaikuttaa tuotteen laatu. Näitä tekijöitä voidaan mitata käyttämällä esimerkiksi mallia tuotannon kokonaistehokkuudesta. Tämä työ tarkastelee tuotto-kustannus -mallin soveltuvuutta paperikoneprosessin tuloksentekokyvyn arviointiin. Lisäksi tutkimuksen kohde on elinkaarimallinnuksen periaatteisiin perustuvan mallin tiedontarpeiden arvioinnissa sekä mallilla tuotettavien tulosten selvittämisessä. Työssä käsitellyn mallinnusperiaatteen mukainen prosessimalli mahdollistaa kokonaisnäkemyksen paperikoneprosessin tuottoja ja kustannuksia aiheuttavista tekijöistä. Mallilla saatavien tuloksien tarkkuus riippuu käytettävissä olevista lähtötiedoista. Työn esimerkkimallinnus listaa vähimmäistiedot, joilla paperikoneen tuottoja ja kustannustekijöitä tarkasteleva malli voidaan toteuttaa. Työ osoittaa, että paperikoneella on paljon tuotantoaikaan vaikuttavia häiriötekijöitä, joiden merkittävyys on analysoitava tarkemman mallin rakentamiseksi. Mallin kohdentaminen olemassa olevalle paperikoneelle antaisi riittävästi mittaustietoa ja kokemusperäistä tietoa mallin tarpeisiin. Yksityiskohtaisemman mallin rakentamisella saataneen myös yleisesti paperikoneprosessin tuotantohäiriöihin liittyvää tietoa.

A Feasibility Study of a Pelleting Plant as an Option for By Product Upgrading in Wood-Processing Industry

Tämän kannattavuustutkimuksen lähtökohtana oli se, että Yhtyneet Sahat Oy:n Kaukaan sahalla ja Luumäen jatkojalostuslaitoksella haluttiin selvittää pellettitehtaan kannattavuus nykyisessä markkinatilanteessa. Tämä työon luonteeltaan teknis-taloudellinen selvitys eli ns. feasibility study. Pelletöintiprosessi on tekniikaltaan yksinkertainen eikä edellytä korkea teknologian laitteita. Toimiala on maailmanlaajuisesti varsin uusi. Suomessa pellettimarkkinat ovat vielä pienet ja kehittymättömät, mutta kasvua on viime vuosina tapahtunut. Valtaosa kotimaan tuotannosta menee vientiin. Investoinnin laskentaprosessissa saadut tuotannon alkuarvot sekä kustannusrakenteen määrittelyt ovat perustana varsinaisille kannattavuuslaskelmille. Laskelmista on selvitetty investointeihin liittyvät yleisimmät taloudelliset tunnusluvut ja herkimpiä muuttujia on tutkittu ja pohdittu herkkyysanalyysiä apuna käyttäen.

TLR5 signaling stimulates the innate production of IL-17 and IL-22 by CD3(neg)CD127+ immune cells in spleen and mucosa.

In adaptive immunity, Th17 lymphocytes produce the IL-17 and IL-22 cytokines that stimulate mucosal antimicrobial defenses and tissue repair. In this study, we observed that the TLR5 agonist flagellin induced swift and transient transcription of genes encoding IL-17 and IL-22 in lymphoid, gut, and lung tissues. This innate response also temporarily enhanced the expression of genes associated with the antimicrobial Th17 signature. The source of the Th17-related cytokines was identified as novel populations of CD3(neg)CD127(+) immune cells among which CD4-expressing cells resembling lymphoid tissue inducer cells. We also demonstrated that dendritic cells are essential for expression of Th17-related cytokines and so for stimulation of innate cells. These data define that TLR-induced activation of CD3(neg)CD127(+) cells and production of Th17-related cytokines may be crucial for the early defenses against pathogen invasion of host tissues.

Competitiveness Comparison of the Electricity Production Alternatives

The competitiveness comparison is carried out for merely electricity producing alternatives. In Finland, further construction of CHP (combined heat and power) power plants will continue and cover part of the future power supply deficit, but also new condensing power plant capacity will be needed. The following types of power plants are studied: - nuclear power plant, - coal-fired condensing power plant - combined cycle gas turbine plant, - peat-fired condensing power plant. - wood-fired condensing power plant - wind power plant The calculations have been made using the annuity method with a real interest rate of 5 % perannum and with a fixed price level as of March 2003. With the annual full load utilization time of 8000 hours the nuclear electricity would cost 23,7 ¤/MWh, the gas based electricity 32,3 ¤/MWh and coal based electricity 28,1 ¤/MWh. If the influence of emission trading is taken into account,the advantage of the nuclear power will still be improved. Inorder to study the impact of changes in the input data, a sensitivity analysis has been carried out. It reveals that the advantage of the nuclear power is quite clear. E.g. the nuclear electricity is rather insensitive tothe changes of the uranium price, whereas for natural gas alternative the rising trend of gas price causes the greatest risk.

Product Platform Development from the Product Lines' Perspective: Case of Switching Platform

In the era of fast product development and customized product requirements, the concept of product platform has proven its power in practice. The product platform approach has enabledcompanies to increase the speed of product introductions while simultaneously benefit from efficiency and effectiveness in the development and production activities. The product platforms are technological bases, which can be used to develop several derivative products, and hence, the differentiation can be pushed closer to the product introduction. The product platform development has some specific features, which differ somewhat from the product development of single products. The time horizon is longer, since the product platform¿slife cycle is longer than individual product's. The long time-horizon also proposes higher market risks and the use of new technologies increases the technological risks involved. The end-customer interface might be far away, but there is not a lack of needs aimed at the product platforms ¿ in fact, the product platform development is very much balancing between the varying needs set to it by thederivative products. This dissertation concentrated on product platform development from the internal product lines' perspective of a singlecase. Altogether six product platform development factors were identified: 'Strategic and business fit of product platform', 'Project communication and deliverables', 'Cooperation with product platform development', 'Innovativeness of product platform architecture and features', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. From the six factors, three were found to influence quite strongly the overall satisfaction, namely 'Strategic and business fit of product platform', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. Hence, these three factors might be the ones a new product platform development unit should concentrate first in order to satisfy their closest customers, the product lines. The 'Project communication and deliverables' and 'Innovativeness of product platform architecture and features' were weaker contributors to the overall satisfaction. Overall, the factors explained quite well the satisfaction of the product lines with product platform development. Along the research, several interesting aspects about the very basic nature of the product platform development were found. The long time horizon of the product platform development caused challenges in the area of strategic fIT - a conflict between the short-term requirements and long term needs. The fact that a product platform was used as basis of several derivative products resulted into varying needs, and hence the match with the needs and the strategies. The opinions, that the releases of the larger product lines were given higher priorities, give an interesting contribution to the strategy theory of powerand politics. The varying needs of the product lines, the strengths of them as well as large number of concurrent releases set requirements to prioritization. Hence, the research showed the complicated nature of the product platform development in the case unIT - the very basic nature of the product platform development might be its strength (gaining efficiency and effectiveness in product development and product launches) but also the biggest challenge (developing products to meet several needs). As a single case study, the results of this research are not directly generalizable to all the product platform development activities. Instead, the research serves best as a starting point for additional research as well as gives some insights about the factors and challengesof one product development unit.

Database Rights in Safe European Home: The Path to More Rigorous Protection of Information

1. Introduction "The one that has compiled ... a database, the collection, securing the validity or presentation of which has required an essential investment, has the sole right to control the content over the whole work or over either a qualitatively or quantitatively substantial part of the work both by means of reproduction and by making them available to the public", Finnish Copyright Act, section 49.1 These are the laconic words that implemented the much-awaited and hotly debated European Community Directive on the legal protection of databases,2 the EDD, into Finnish Copyright legislation in 1998. Now in the year 2005, after more than half a decade of the domestic implementation it is yet uncertain as to the proper meaning and construction of the convoluted qualitative criteria the current legislation employs as a prerequisite for the database protection both in Finland and within the European Union. Further, this opaque Pan-European instrument has the potential of bringing about a number of far-reaching economic and cultural ramifications, which have remained largely uncharted or unobserved. Thus the task of understanding this particular and currently peculiarly European new intellectual property regime is twofold: first, to understand the mechanics and functioning of the EDD and second, to realise the potential and risks inherent in the new legislation in economic, cultural and societal dimensions. 2. Subject-matter of the study: basic issues The first part of the task mentioned above is straightforward: questions such as what is meant by the key concepts triggering the functioning of the EDD such as presentation of independent information, what constitutes an essential investment in acquiring data and when the reproduction of a given database reaches either qualitatively or quantitatively the threshold of substantiality before the right-holder of a database can avail himself of the remedies provided by the statutory framework remain unclear and call for a careful analysis. As for second task, it is already obvious that the practical importance of the legal protection providedby the database right is in the rapid increase. The accelerating transformationof information into digital form is an existing fact, not merely a reflection of a shape of things to come in the future. To take a simple example, the digitisation of a map, traditionally in paper format and protected by copyright, can provide the consumer a markedly easier and faster access to the wanted material and the price can be, depending on the current state of the marketplace, cheaper than that of the traditional form or even free by means of public lending libraries providing access to the information online. This also renders it possible for authors and publishers to make available and sell their products to markedly larger, international markets while the production and distribution costs can be kept at minimum due to the new electronic production, marketing and distributionmechanisms to mention a few. The troublesome side is for authors and publishers the vastly enhanced potential for illegal copying by electronic means, producing numerous virtually identical copies at speed. The fear of illegal copying canlead to stark technical protection that in turn can dampen down the demand for information goods and services and furthermore, efficiently hamper the right of access to the materials available lawfully in electronic form and thus weaken the possibility of access to information, education and the cultural heritage of anation or nations, a condition precedent for a functioning democracy. 3. Particular issues in Digital Economy and Information Networks All what is said above applies a fortiori to the databases. As a result of the ubiquity of the Internet and the pending breakthrough of Mobile Internet, peer-to-peer Networks, Localand Wide Local Area Networks, a rapidly increasing amount of information not protected by traditional copyright, such as various lists, catalogues and tables,3previously protected partially by the old section 49 of the Finnish Copyright act are available free or for consideration in the Internet, and by the same token importantly, numerous databases are collected in order to enable the marketing, tendering and selling products and services in above mentioned networks. Databases and the information embedded therein constitutes a pivotal element in virtually any commercial operation including product and service development, scientific research and education. A poignant but not instantaneously an obvious example of this is a database consisting of physical coordinates of a certain selected group of customers for marketing purposes through cellular phones, laptops and several handheld or vehicle-based devices connected online. These practical needs call for answer to a plethora of questions already outlined above: Has thecollection and securing the validity of this information required an essential input? What qualifies as a quantitatively or qualitatively significant investment? According to the Directive, the database comprises works, information and other independent materials, which are arranged in systematic or methodical way andare individually accessible by electronic or other means. Under what circumstances then, are the materials regarded as arranged in systematic or methodical way? Only when the protected elements of a database are established, the question concerning the scope of protection becomes acute. In digital context, the traditional notions of reproduction and making available to the public of digital materials seem to fit ill or lead into interpretations that are at variance with analogous domain as regards the lawful and illegal uses of information. This may well interfere with or rework the way in which the commercial and other operators have to establish themselves and function in the existing value networks of information products and services. 4. International sphere After the expiry of the implementation period for the European Community Directive on legal protection of databases, the goals of the Directive must have been consolidated into the domestic legislations of the current twenty-five Member States within the European Union. On one hand, these fundamental questions readily imply that the problemsrelated to correct construction of the Directive underlying the domestic legislation transpire the national boundaries. On the other hand, the disputes arisingon account of the implementation and interpretation of the Directive on the European level attract significance domestically. Consequently, the guidelines on correct interpretation of the Directive importing the practical, business-oriented solutions may well have application on European level. This underlines the exigency for a thorough analysis on the implications of the meaning and potential scope of Database protection in Finland and the European Union. This position hasto be contrasted with the larger, international sphere, which in early 2005 does differ markedly from European Union stance, directly having a negative effect on international trade particularly in digital content. A particular case in point is the USA, a database producer primus inter pares, not at least yet having aSui Generis database regime or its kin, while both the political and academic discourse on the matter abounds. 5. The objectives of the study The above mentioned background with its several open issues calls for the detailed study of thefollowing questions: -What is a database-at-law and when is a database protected by intellectual property rights, particularly by the European database regime?What is the international situation? -How is a database protected and what is its relation with other intellectual property regimes, particularly in the Digital context? -The opportunities and threats provided by current protection to creators, users and the society as a whole, including the commercial and cultural implications? -The difficult question on relation of the Database protection and protection of factual information as such. 6. Dsiposition The Study, in purporting to analyse and cast light on the questions above, is divided into three mainparts. The first part has the purpose of introducing the political and rationalbackground and subsequent legislative evolution path of the European database protection, reflected against the international backdrop on the issue. An introduction to databases, originally a vehicle of modern computing and information andcommunication technology, is also incorporated. The second part sets out the chosen and existing two-tier model of the database protection, reviewing both itscopyright and Sui Generis right facets in detail together with the emergent application of the machinery in real-life societal and particularly commercial context. Furthermore, a general outline of copyright, relevant in context of copyright databases is provided. For purposes of further comparison, a chapter on the precursor of Sui Generi, database right, the Nordic catalogue rule also ensues. The third and final part analyses the positive and negative impact of the database protection system and attempts to scrutinize the implications further in the future with some caveats and tentative recommendations, in particular as regards the convoluted issue concerning the IPR protection of information per se, a new tenet in the domain of copyright and related rights.

Selection response of growth rate in rabbits for meat production

Genetic and environmental trends in 2 lines of rabbit (B and R) selected on individual weight gain (WG) from weaning (4 wk) to slaughter (11 wk) were estimated using mixed model methodology. Line B was derived from the California breed and line R was a synthetic of stock of different origin. The data were collected from a single herd and comprised 7 718 individuals in line B and 9 391 in line R, the lines having 12 and 9 generations of selection respectively. Realized responses in the 2 lines were 2.7% and 2.2% of the initial mean per year respectively and showed that selection on WG was effective but was less than expected. Selection on slaughter weight (SW) and effects of selection on other economic traits are discussed. It is concluded that selection on either WG or SW is a simple method for improving growth rate in rabbit sire line stocks.

Empirical models for predicting the production of wild mushrooms in Scots pine (Pinus sylvestris L.) forests in the Central Pyrenees

Mushroom picking has become a widespread autumn recreational activity in the Central Pyrenees and other regions of Spain. Predictive models that relate mushroom production or fungal species richness with forest stand and site characteristics are not available. This study used mushroom production data from 24 Scots pine plots over 3 years to develop a predictive model that could facilitate forest management decisions when comparing silvicultural options in terms of mushroom production. Mixed modelling was used to model the dependence of mushroom production on stand and site factors. The results showed that productions were greatest when stand basal area was approximately 20 m2 ha-1. Increasing elevation and northern aspect increased total mushroom production as well as the production of edible and marketed mushrooms. Increasing slope decreased productions. Marketed Lactarius spp., the most important group collected in the region, showed similar relationships. The annual variation in mushroom production correlated with autumn rainfall. Mushroom species richness was highest when the total production was highest.

Quantification of the relation between surface morphodynamics and subsurface sedimentological product in sandy braided rivers

This study uses digital elevation models and ground-penetrating radar to quantify the relation between the surface morphodynamics and subsurface sedimentology in the sandy braided South Saskatchewan River, Canada. A unique aspect of the methodology is that both digital elevation model and ground-penetrating radar data were collected from the same locations in 2004, 2005, 2006 and 2007, thus enabling the surface morphodynamics to be tied explicitly to the associated evolving depositional product. The occurrence of a large flood in 2005 also allowed the influence of discharge to be assessed with respect to the processproduct relationship. The data demonstrate that the morphology of the study reach evolved even during modest discharges, but more extensive erosion was caused by the large flood. In addition, the study reach was dominated by compound bars before the flood, but switched to being dominated by unit bars during and after the flood. The extent to which the subsurface deposits (the product') were modified by the surface morphodynamics (the process') was quantified using the changes in radar-facies recorded in sequential ground-penetrating radar surveys. These surveys reveal that during the large flood there was an increase in the proportion of facies associated with bar margin accretion and larger dunes. In subsequent years, these facies became truncated and replaced with facies associated with smaller dune sets. This analysis shows that unit bars generally become truncated more laterally than vertically and, thus, they lose the high-angle bar margin deposits and smaller scale bar-top deposits. In general, the only fragments that remain of the unit bars are dune sets, thus making identification of the original unit barform problematic. This novel data set has implications for what may ultimately become preserved in the rock record.

Production costs and fruit yield profitability in the initial harvest of custard apple trees

The aim of this study was to estimate the production cost and economic indicators associated with the production and sales of fruits from 20 custard apple progenies during the initial five harvests, in order to identify the harvest season from which custard apple exploitation becomes profitable, as well as the most promising progenies from an economic point of view. The fruit yield data upon which the present work was based were obtained during the period from 2001 to 2005, in an experiment that evaluated 20 custard apple half-sibling progenies, under sprinkler irrigation. The progenies were evaluated in a random block design with five replicates and plots consisting of four plants each. The exploitation of custard apple progenies only showed to be a profitable agribusiness after the fourth year. Before that, only A3 and A4 progenies in the second year, and P3 and P11 in the third year provided profitable incomes. Considering the methodological assumptions imposed concerning the time period analysis and the prices as of July 2007, the most important profitability indicators (operating profit, return index and equilibrium price) evidenced that the A4 progeny is the most recommended, although other progenies are also highlighted, such as FJ1 and FJ2. As already discussed, the progenies showing the highest average yields of five harvests are not always the most economically recommendable ones.