Accounting for residential and non-residential environments to measure contextual effects on health behavior : the case of recreational walking behavior

Thèse réalisée en cotutelle entre l'Université de Montréal et l'Université Pierre et Marie Curie, Paris 06, Sorbonne Universités.

Bomb-tritium input function calculated from the details of the nuclear atmospheric bomb tests released by the UNSCEAR [2000]

Improving the representation of the hydrological cycle in Atmospheric General Circulation Models (AGCMs) is one of the main challenges in modeling the Earth's climate system. One way to evaluate model performance is to simulate the transport of water isotopes. Among those available, tritium (HTO) is an extremely valuable tracer, because its content in the different reservoirs involved in the water cycle (stratosphere, troposphere, ocean) varies by order of magnitude. Previous work incorporated natural tritium into LMDZ-iso, a version of the LMDZ general circulation model enhanced by water isotope diagnostics. Here for the first time, the anthropogenic tritium injected by each of the atmospheric nuclear-bomb tests between 1945 and 1980 has been first estimated and further implemented in the model; it creates an opportunity to evaluate certain aspects of LDMZ over several decades by following the bomb-tritium transient signal through the hydrological cycle. Simulations of tritium in water vapor and precipitation for the period 1950-2008, with both natural and anthropogenic components, are presented in this study. LMDZ-iso satisfactorily reproduces the general shape of the temporal evolution of tritium. However, LMDZ-iso simulates too high a bomb-tritium peak followed by too strong a decrease of tritium in precipitation. The too diffusive vertical advection in AGCMs crucially affects the residence time of tritium in the stratosphere. This insight into model performance demonstrates that the implementation of tritium in an AGCM provides a new and valuable test of the modeled atmospheric transport, complementing water stable isotope modeling.

Analysis of Poverty Dynamics in Canada (Working Paper 9)

While we know much about poverty (or “low income”) in Canada in a static context, our understanding of the underlying dynamics remains very limited. This is particularly problematic from a policy perspective and the country has been increasingly left out on an international level in this regard. The contribution of this paper is to report the results of an empirical analysis of low income (“poverty”) dynamics in Canada using the recently available “LAD” tax-based database. The paper first describes the general nature of individuals’ poverty profiles (how many are short-term versus longterm, etc.)., the breakdown of the poor population in any given year amongst these different types, and the characterisation of poverty profiles by sex and family type. It then reports the estimation of various econometric models, starting with a set which specifies entry into and exit from poverty in any given year as a function of a variety of personal attributes and situational characteristics, including family status and changes therein, province of residence, inter-provincial mobility, language, area size of residence and calendar year (to capture trend effects). A set of proper hazard models then adds duration effects to these specifications to see how exit and re-entry probabilities shift with the amount of time spent in a poverty spell or after having exited a previous spell. A final set of specifications then investigates “occurrence dependence” effects by including past poverty spells first in an entry model and then with respect to the probability of being poor in a given year. Policy implications are discussed.

Life expectancy for community-based patients with heart failure from time of diagnosis

AIMS: Heart failure has been demonstrated in previous studies to have a dismal prognosis. However, the modern-day prognosis of patients with new onset heart failure diagnosed in the community managed within a disease management programme is not known. The purpose of this study is to report on prognosis of patients presenting with new onset heart failure in the community who are subsequently followed in a disease management program.

METHODS AND RESULTS: A review of patients referred to a rapid access heart failure diagnostic clinic between 2002 and 2012 was undertaken. Details of diagnosis, demographics, medical history, medications, investigations and mortality data were analysed. A total of 733 patients were seen in Rapid Access Clinic for potential new diagnosis of incident of heart failure. 38.9% (n=285) were diagnosed with heart failure, 40.7% (n=116) with HF-REF and 59.3% (n=169) with HF-PEF. There were 84 (29.5%) deaths in the group of patients diagnosed with heart failure; 41 deaths (35.3%) occurred in patients with HF-REF and 43 deaths (25.4%) occurred in patients with HF-PEF. In patients with heart failure, 52.4% (n=44) died from cardiovascular causes. 63.8% of HF patients were alive after 5 years resulting on average in a month per year loss of life expectancy over that period compared with aged matched simulated population.

CONCLUSIONS: In this community-based cohort, the prognosis of heart failure was better than reported in previous studies. This is likely due to the impact of prompt diagnosis, the improvement in therapies and care within a disease management structure.

Smoking during pregnancy by duration of residence among immigrants in Sweden 1991-2012 : A study on health inequalities

This study revisits the effect of duration by residence in relation to smoking during pregnancy. It contributes to the literature by incorporating a health inequity perspective, and discusses whether immigrants tend to converge with Swedish women’s smoking. The study is based on Swedish Medical Birth Register and includes 1 1864 52 pregnancies between 1991 and 2012. Logistic regression was performed to attain crude and adjusted Odds Ratios and 95 % confidence intervals. Immigrants’ are divided by categorizing countries of origin depending on levels of Human Development (IHDI). Overall immigrant women show low levels of smoking during pregnancy when they arrive to Sweden, by duration of residence levels of smoking increase and converge with smoking patterns of Swedish women. I found that there are differences in smoking patterns depending on IHDI of the country. Immigrant women of higher categories of IHDI show higher levels of smoking although the increase of smoking is higher among immigrant women from categories of lower IHDI. However, immigrant women’s smoking during pregnancy is affected by duration of residence, and the increased smoking is associated with health inequalities related to their country of origins IHDI, and by socioeconomic inequalities in Sweden. 

The Effect of Residence Time on the Tensile Properties of Superelastic and Thermal Activated Ni-Ti Orthodontic Wires

Since the 1980s, different devices based on superelastic alloys have been developed to fulfill orthodontic applications. Particularly in the last decades several researches have been carried out to evaluate the mechanical behavior of Ni-Ti alloys, including their tensile, torsion and fatigue properties. However, studies regarding the dependence of elastic properties on residence time of Ni-Ti wires in the oral cavity are scarce. Such approach is essential since metallic alloys are submitted to mechanical stresses during orthodontic treatment as well as pH and temperature fluctuations. The goal of the present contribution is to provide elastic stress-strain results to guide the orthodontic choice between martensitic thermal activated and austenitic superelastic Ni-Ti alloys. From the point of view of an orthodontist, the selection of appropriate materials and the correct maintenance of the orthodontic apparatus are essential needs during clinical treatment. The present work evaluated the elastic behavior of Ni-Ti alloy wires with diameters varying from 0.014 to 0.020 inches, submitted to hysteresis tensile tests with 8% strain. Tensile tests were performed after periods of use of 1, 2 and 3 months in the oral cavity of patients submitted to orthodontic treatment. The results from the hysteresis tests allowed to exam the strain range covered by isostress lines upon loading and unloading, as well as the residual strain after unloading for both superelastic and thermal activated Ni-Ti wires. Superelastic Ni-Ti wires exhibited higher load isostress values compared to thermal activated wires. It was found that such differences in the load isostress values can increase with increasing residence time.

Residence Time Distribution (Rtd) Associated with Statistical Weighted Moments to Fit Mathematical Models Using In Industrial Systems Diagnosis

This work presents a computational, called MOMENTS, code developed to be used in process control to determine a characteristic transfer function to industrial units when radiotracer techniques were been applied to study the unit´s performance. The methodology is based on the measuring the residence time distribution function (RTD) and calculate the first and second temporal moments of the tracer data obtained by two scintillators detectors NaI positioned to register a complete tracer movement inside the unit. Non linear regression technique has been used to fit various mathematical models and a statistical test was used to select the best result to the transfer function. Using the code MOMENTS, twelve different models can be used to fit a curve and calculate technical parameters to the unit.

Migration and Residence Patterns of Salmonids in Puget Sound, Washington

Thesis (Ph.D.)--University of Washington, 2016-08

Previous land use and climate influence differences in soil organic carbon following reforestation of agricultural land with mixed-species plantings

Reforestation of agricultural land with mixed-species environmental plantings (native trees and shrubs) can contribute to mitigation of climate change through sequestration of carbon. Although soil carbon sequestration following reforestation has been investigated at site- and regional-scales, there are few studies across regions where the impact of a broad range of site conditions and management practices can be assessed. We collated new and existing data on soil organic carbon (SOC, 0–30 cm depth, N = 117 sites) and litter (N = 106 sites) under mixed-species plantings and an agricultural pair or baseline across southern and eastern Australia. Sites covered a range of previous land uses, initial SOC stocks, climatic conditions and management types. Differences in total SOC stocks following reforestation were significant at 52% of sites, with a mean rate of increase of 0.57 ± 0.06 Mg C ha−1 y−1. Increases were largely in the particulate fraction, which increased significantly at 46% of sites compared with increases at 27% of sites for the humus fraction. Although relative increase was highest in the particulate fraction, the humus fraction was the largest proportion of total SOC and so absolute differences in both fractions were similar. Accumulation rates of carbon in litter were 0.39 ± 0.02 Mg C ha−1 y−1, increasing the total (soil + litter) annual rate of carbon sequestration by 68%. Previously-cropped sites accumulated more SOC than previously-grazed sites. The explained variance differed widely among empirical models of differences in SOC stocks following reforestation according to SOC fraction and depth for previously-grazed (R2 = 0.18–0.51) and previously-cropped (R2 = 0.14–0.60) sites. For previously-grazed sites, differences in SOC following reforestation were negatively related to total SOC in the pasture. By comparison, for previously-cropped sites, differences in SOC were positively related to mean annual rainfall. This improved broad-scale understanding of the magnitude and predictors of changes in stocks of soil and litter C following reforestation is valuable for the development of policy on carbon markets and the establishment of future mixed-species environmental plantings.

Improving the stability of an oxime based electrochemical microsensor for organo-phosphate vapor detection

A micro gas sensor has been developed by our group for the detection of organo-phosphate vapors using an aqueous oxime solution. The analyte diffuses from the high flow rate gas stream through a porous membrane to the low flow rate aqueous phase. It reacts with the oxime PBO (1-Phenyl-1,2,3,-butanetrione 2-oxime) to produce cyanide ions, which are then detected electrochemically from the change in solution potential. Previous work on this oxime based electrochemistry indicated that the optimal buffer pH for the aqueous solution was approximately 10. A basic environment is needed for the oxime anion to form and the detection reaction to take place. At this specific pH, the potential response of the sensor to an analyte (such as acetic anhydride) is maximized. However, sensor response slowly decreases as the aqueous oxime solution ages, by as much as 80% in first 24 hours. The decrease in sensor response is due to cyanide which is produced during the oxime degradation process, as evidenced by the cyanide selective electrode. Solid phase micro-extraction carried out on the oxime solution found several other possible degradation products, including acetic acid, N-hydroxy benzamide, benzoic acid, benzoyl cyanide, 1-Phenyl 1,3-butadione, 2-isonitrosoacetophenone and an imine derived from the oxime. It was concluded that degradation occurred through nucleophilic attack by a hydroxide or oxime anion to produce cyanide, as well as a nitrogen atom rearrangement similar to Beckmann rearrangement. The stability of the oxime in organic solvents is most likely due to the lack of water, and specifically hydroxide ions. The reaction between oxime and organo-phosphate to produce cyanide ions requires hydroxide ions, and therefore pure organic solvents are not compatible with the current micro-sensor electrochemistry. By combining a concentrated organic oxime solution with the basic aqueous buffer just prior to being used in the detection process, oxime degradation can be avoided while preserving the original electrochemical detection scheme. Based on beaker cell experiments with selective cyanide sensitive electrodes, ethanol was chosen as the best organic solvent due to its stabilizing effect on the oxime, minimal interference with the aqueous electrochemistry, and compatibility with the current microsensor material (PMMA). Further studies showed that ethanol had a small effect on micro-sensor performance by reducing the rate of cyanide production and decreasing the overall response time. To avoid incomplete mixing of the aqueous and organic solutions, they were pre-mixed externally at a 10:1 ratio, respectively. To adapt the microsensor design to allow for mixing to take place within the device, a small serpentine channel component was fabricated with the same dimensions and material as the original sensor. This allowed for seamless integration of the microsensor with the serpentine mixing channel. Mixing in the serpentine microchannel takes place via diffusion. Both detector potential response and diffusional mixing improve with increased liquid residence time, and thus decreased liquid flowrate. Micromixer performance was studies at a 10:1 aqueous buffer to organic solution flow rate ratio, for a total rate of 5.5 μL/min. It was found that the sensor response utilizing the integrated micromixer was nearly identical to the response when the solutions were premixed and fed at the same rate.

The Effect of Residence Time on the Tensile Properties of Superelastic and Thermal Activated Ni-Ti Orthodontic Wires

Since the 1980s, different devices based on superelastic alloys have been developed to fulfill orthodontic applications. Particularly in the last decades several researches have been carried out to evaluate the mechanical behavior of Ni-Ti alloys, including their tensile, torsion and fatigue properties. However, studies regarding the dependence of elastic properties on residence time of Ni-Ti wires in the oral cavity are scarce. Such approach is essential since metallic alloys are submitted to mechanical stresses during orthodontic treatment as well as pH and temperature fluctuations. The goal of the present contribution is to provide elastic stress-strain results to guide the orthodontic choice between martensitic thermal activated and austenitic superelastic Ni-Ti alloys. From the point of view of an orthodontist, the selection of appropriate materials and the correct maintenance of the orthodontic apparatus are essential needs during clinical treatment. The present work evaluated the elastic behavior of Ni-Ti alloy wires with diameters varying from 0.014 to 0.020 inches, submitted to hysteresis tensile tests with 8% strain. Tensile tests were performed after periods of use of 1, 2 and 3 months in the oral cavity of patients submitted to orthodontic treatment. The results from the hysteresis tests allowed to exam the strain range covered by isostress lines upon loading and unloading, as well as the residual strain after unloading for both superelastic and thermal activated Ni-Ti wires. Superelastic Ni-Ti wires exhibited higher load isostress values compared to thermal activated wires. It was found that such differences in the load isostress values can increase with increasing residence time.

Probabilistic approach of water residence time and connectivity using Markov Chains with application to tidal embayments

Markov Chain analysis was recently proposed to assess the time scales and preferential pathways into biological or physical networks by computing residence time, first passage time, rates of transfer between nodes and number of passages in a node. We propose to adapt an algorithm already published for simple systems to physical systems described with a high resolution hydrodynamic model. The method is applied to bays and estuaries on the Eastern Coast of Canada for their interest in shellfish aquaculture. Current velocities have been computed by using a 2 dimensional grid of elements and circulation patterns were summarized by averaging Eulerian flows between adjacent elements. Flows and volumes allow computing probabilities of transition between elements and to assess the average time needed by virtual particles to move from one element to another, the rate of transfer between two elements, and the average residence time of each system. We also combined transfer rates and times to assess the main pathways of virtual particles released in farmed areas and the potential influence of farmed areas on other areas. We suggest that Markov chain is complementary to other sets of ecological indicators proposed to analyse the interactions between farmed areas - e.g. depletion index, carrying capacity assessment. Markov Chain has several advantages with respect to the estimation of connectivity between pair of sites. It makes possible to estimate transfer rates and times at once in a very quick and efficient way, without the need to perform long term simulations of particle or tracer concentration.

Motivação para amamentação em função da escolaridade materna

Enquadramento: Atualmente a prevalência da amamentação à saída da maternidade é elevada, no entanto não temos valores semelhantes quanto ao aleitamento materno exclusivo, nem no seu prolongamento até aos dois anos. Objetivos: Verificar as relações entre a motivação das puérperas para a amamentação e variáveis sociodemográficas e obstétricas e analisar a influência das variáveis sociodemográficas e obstétricas na motivação para a amamentação quando mediadas pela escolaridade da puérpera. Material e métodos: Estudo não experimental, quantitativo, descritivo correlacional e analítico. O tipo de amostragem é não probabilístico por conveniência. O instrumento de colheita de dados foi o questionário, aplicado a 479 puérperas (média de idade 30,56 anos) no dia da alta hospitalar. O questionário permitiu fazer a caracterização da amostra em termos sociodemográficos e obstétricos. Foi ainda utilizada a escala de Motivação para Amamentação de Nelas, Ferreira & Duarte (2008). Resultados: Os resultados obtidos revelam que 86,6% são casadas ou vivem em união de fato e pertencem a uma família nuclear (89,1%). Na amostra, 59,5% tem o Ensino Superior e 73.9% encontra-se empregada e 55,3% reside em meio urbano. A maioria (43,0%), esteve grávida só uma vez e 34.4% já tinha tido uma gestação anterior. São mães pela primeira vez 48,0%, 79,3% realizou seis ou mais consultas tal como o preconizado, e 92,4% planeou a gravidez. A maioria dos partos foi de termo (68,4%). A quase totalidade (9 em cada 10) revela elevada motivação para amamentar. A idade, o estado civil, a residência e as habilitações literárias não influenciam a motivação geral para a amamentação As puérperas desempregadas são as mais motivadas. As puérperas mais motivadas tiveram duas ou mais gestações, e são multíparas. Não foi provada a relação entre as outras variáveis obstétricas e a motivação para a amamentação. A variável mediadora apenas teve impacto com o local de residência, onde as participantes residentes em meio urbano e com ensino superior são as mais motivadas na dimensão fisiológica, seguidas das residentes em meio urbano e com habilitações literárias até ao ensino secundário. Conclusões: Sugerimos a criação de um grupo de trabalho com atuação na comunidade escolar para capacitar os jovens sobre a importância do aleitamento materno, recriando uma 8 cultura de amamentação assente nas orientações emanadas na política de aleitamento materno dos Hospitais amigos dos bebés. Palavras-chave: Amamentação, Motivação, Escolaridade.