Estudo de concretos de diferentes resistências à compressão submetidos a altas temperaturas sem e com incorporação de fibras de politereftalato de etileno (PET)

The reinforced concrete structures are largely used in buildings worldwide. Upon the occurrence of fire in buildings, there is a consensus among researchers that the concrete has a high resistance to fire, due mainly to its low thermal conductivity. However, this does not mean that this material is not affected by exposure to high temperatures. Reduction of the compressive strength, modulus of elasticity, discoloration and cracking, are some of the effects caused by thermal exposure. In the case of concretes with higher resistance occurs even desplacamentos explosives, exposing the reinforcement to fire and contributing to reducing the support capacity of the structural element. Considering the above, this study aims to examine how the compressive strength and porosity of concrete are affected when subjected to high temperatures. Were evaluated concrete of different resistances, and even was the verified if addition fibers of polyethylene terephthalate (PET) in concrete can be used as an alternative to preventing spalling. The results indicated that explosive spalling affect not only high strength concrete whose values of this study ranged from 70 to 88 MPa, as well as conventional concrete of medium strength (52 MPa) and the temperature range to which the concrete begins to suffer significant changes in their resistance is between 400 º C and 600 º C, showing to 600 º C a porosity up to 188% greater than the room temperature

Análise teórica e experimental de superfícies seletivas de freqüência e suas aplicações em antenas planares

This work presents a theoretical and numerical analysis of structures using frequency selective surfaces applied on patch antennas. The FDTD method is used to determine the time domain reflected fields. Applications of frequency selective surfaces and patch antennas cover a wide area of telecommunications, especially mobile communications, filters and WB antennas. scattering parameters are obteained from Fourier Transformer of transmited and reflected fields in time domain. The PML are used as absorbing boundary condition, allowing the determination of the fields with a small interference of reflections from discretized limit space. Rectangular patches are considered on dielectric layer and fed by microstrip line. Frequency selective surfaces with periodic and quasi-periodic structures are analyzed on both sides of antenna. A literature review of the use of frequency selective surfaces in patch antennas are also performed. Numerical results are also compared with measured results for return loss of analyzed structures. It is also presented suggestions of continuity to this work

Propriedades de resistência e rigidez da madeira juvenil e adulta de Pinus taeda L.

O objetivo do presente trabalho foi o estudo da variabilidade das propriedades de resistência e rigidez à flexão estática e à densidade aparente (12%) entre a madeira juvenil e adulta de Pinus taeda L., de 37 anos de idade, procedente do Horto Florestal de Manduri, Estado de São Paulo. Na primeira parte do trabalho foram determinadas a região de madeira juvenil, a região de transição e a região de madeira adulta, por meio de estudos anatômicos (comprimento dos traqueídes axiais), segundo as recomendações das normas ABNT e IAWA. Os resultados mostraram que a região de madeira juvenil dessa espécie ocorre aproximadamente até o 18º anel de crescimento. Na segunda parte do trabalho foram analisados a resistência (módulo de ruptura - MOR) à flexão, o módulo de elasticidade (MOE) nessa mesma solicitação e a densidade aparente (12%) para as madeiras juvenil e adulta. Os resultados mostraram que o MOE e o MOR da madeira juvenil foram menores e mais variáveis que aqueles obtidos para madeira adulta. A densidade apresentou a mesma tendência observada nas propriedades avaliadas no ensaio de flexão estática.

Determinação do módulo de elasticidade da madeira juvenil e adulta de Pinus taeda por ultra-som

A madeira de Pinus sp. tem utilização crescente na indústria madeireira brasileira. O decréscimo constante do suprimento de árvores adultas com grandes diâmetros, provenientes de florestas naturais, tornou comum a produção de madeira em ciclos curtos, com grande proporção de madeira juvenil. Resultados de diversas pesquisas têm reportado que o módulo de elasticidade e a resistência a diferentes solicitações mecânicas são seriamente afetados pela presença de madeira juvenil. Este trabalho teve por objetivo determinar o módulo de elasticidade da madeira juvenil e adulta de Pinus taeda L. a partir da constante dinâmica C LL, obtida em ensaios não-destrutivos de ultra-som. A madeira de P. taeda era originária de plantios da Estação Experimental de Itapeva - SP, sendo amostrados seis indivíduos arbóreos com 34 anos de idade. Os corpos-de-prova (4 cm x 4 cm x 45 cm) foram obtidos separadamente das regiões de madeira juvenil e adulta da prancha central, previamente submetida à secagem industrial (umidade final de 12%), para a determinação da constante dinâmica por meio de ensaios de ultra-som. Para avaliar a sensibilidade do método do ultra-som, os corpos-de-prova foram ensaiados destrutivamente à compressão paralela. Os resultados mostraram boa sensibilidade do método do ultra-som (R² » 0,90) na avaliação desse parâmetro mecânico da madeira juvenil e adulta.

Estudo do efeito da substituição de caulim por resíduo de caulim na fabricação de cerâmica de revestimento

Companies involved in kaolin mining and treatment represent an important area of industrial development in Brazil, significantly contribution to the worldwide production of such mineral. As a result, large volumes of kaolin residue are constantly generated and abandoned in the environment, negatively contributing to its preservation. In this scenario, the objective of the present study was to characterize the residue generated from kaolin mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Three compositions were prepared using kaolin residue contents of 10%, 20% and 30%. Samples were uniaxially pressed, fired at 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results showed that the residue basically consisted of kaolinite and successfully replaced raw kaolin in the preparation of ceramic title formulations without significantly affecting the properties of the fired material

Estudo e caracterização de matérias-primas para o desenvolvimento de blocos sílico-calcários

The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks

Estudo do potencial de utilização do resíduo da extração de esmeraldas na fabricação de cerâmica de revestimento

Companies involved in emerald mining and treatment represent an important area of industrial development in Brazil, with significative contribution to the worldwide production of such mineral. As a result, large volumes of emerald waste are constantly generated and abandoned in the environment, negatively contributing to its preservation. By the other side the interest of the use of mining waste as additive in ceramic products has been growing from researchers in recent years. The ceramic industry is constantly seeking to the marked amplification for the sector and perfecting the quality of the products and to increase the variety of applications. The technology of obtaining of ceramic tiles that uses mining residues assists market niches little explored. In this scenario, the objective of the present study was to characterize the residue generated from emerald mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Five compositions were prepared using emerald residue contents of 0%, 10%, 20%, 30% and 40%. Samples were uniaxially pressed, fired at 1000, 1100 and 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results shows that the emerald residue, basically consisted of 73% of (SiO2 + Al2O3) and 17,77% of (MgO + Na2O+ K2O) (that facilitates sintering), can be added to the ceramic tile materials with no detrimental effect on the properties of the sintered products

Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais

This research presents an approach to the addition of curauá fibers and licuri fibers in a polypropylene resin matrix, such as an alternative proposal to reinforce the polymeric composites. Fiber content of 0 %, 5 %, 10 %, and 20% were analyzed for verification of their mechanical properties comparing them, inclusive with the properties of polypropylene. The grainulated biocomposites had been prepared in an extrusora. The test bodies had been molded by injection and submitted to the mechanical essays uniaxial traction, flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger reduction in the resistance to the impact. In the mechanical behavior, for all the biocomposites, these were increases in values of the limit of drainage and tension of rupture, when tested by uniaxial traction, as they added the fibers. Another important point was the increase of the resistance the flexion. It was also noted that the addition of fibers reduced the thermal degradation of the mixture natural fibers / polypropylene.

A coleção mossoroense e a construção dos mitos: Dix-Sept Rosado, o herói imolado

This research comprises a study on the values and ideals attributed to Dix-sept Rosado, by the Coleção Mossoroense journal. Local researchers demonstrate how the Coleção Mossoroense constructs an image of Mossoró, forming in the members of the city an identity with the place, a social cohesion or creating one forms to see and to say about the Mossoró city. The Coleção Mossoroense, through Vingt-un Rosado together with its family, established a form of seeing and identifying of the Mossoró s population with the city, just because it associated and it was, at the same time, a movement at the same time social (civic parties for example), political (the domination of the Rosado s family) and cultural (the books and theatrical parties about the city). The conjunction of the Coleção Mossoroense as and with a social movement, cultural and political was capable to establish a social identity, a subjective constituent . With this background, it was possible to make a study of the image attributed to Dix-sept Rosado, by the Coleção Mossoroense, through an analysis of the inherent discourse in the works by Bakhtin (1989) and Bourdieu (2000), of and on Dix-sept Rosado in the Coleção Mossoroense based on. The image of Dix-sept Rosado was constructed by the Coleção Mossoroense after its death, and the responsible for this was Vingt-un Rosado, which was the chief-editor of the Coleção Mossoroense up to 2006, year of its death. The Coleção Mossoroense built an image of Dix-sept Rosado as an enterprising man, progressive and innovator, of great capacity of leadership and oratory (a conductor of the crowds ), popular and charismatic, an honest and dynamic politician. This image made by the Coleção Mossoroense, although when enhancing in surplus the qualities of Dix-sept Rosado have as objective to transmit an image of a heroic personage, it has some relation with the reality. Dix-sept Rosado was a man identified with its locality. This can resemble a regional nationalism. The attitudes of Dix-sept Rosado must be understood inside of a broader social context, of a time marked by the populist politics. Qualities also appreciated and developed inside of a specific historical context and determined both national and locally. The Coleção Mossoroense enhances the qualities of Dix-sept Rosado so that the current politicians of the Rosado s family can establish a link of continuity in its contemporary political practice

Os Centros de Especialidades Odontológicas como suporte da atenção básica: uma avaliação na perspectiva da integralidade

The public dental services in Brazil were limited, practically, to the basic care, so that the specialized services acted, up to 2002, no more than 3,5% of the total of clinical procedures. That lower offer reveals the difficulty of continuity of the attention, that is, the comprehensiveness in the assistance, particulary, the reference and counter-reference system. Brasil Sorridente search to supply those needs when proposing Speciality Dental's Centers(CEOs Centros de Especialidades Odontológicas, Brazil) to compose the services of average complexity. In 2005, Ministry of Health enabled the three CEOs of Natal, located in the North II, East and West Sanitary Districts. This investigation evaluated the implantation of these CEOs, as support of the family health care teams, in the perspective of organization of the services in assistencial nets in Natal/RN. It was a study of evaluation, with qualitative approach and some quantitative data as contribution. Dentists, users and managers were interviewed to identify and to understand their perceptions, relationships and experiences in the daily of the services. The conceptual base that orientated the investigation was the principle of comprehensiveness, in its operational sense of the hierarchization in health attention levels. The collection of data was done with documental research, direct observation and semi-structured interview. The analysis was accomplished by triangulation of the extracted content from the used techniques and sources of interviewed groups depositions, looking for theoretical-conceptual support in specific bibliography. The results pointed aspects that go away from the comprehensiveness like: low resolution of problems in the basic net; little valorization of the space in the health units; traditional models of access to health services, insufficient offer for some specialties, compromising the reference and counter-reference system; practices centered in procedures in the CEO; bureaucratic directions from basic care to the specialized service; disintegrated and disjointed system among levels of attention; disrespect to the municipal protocol. On the other hand, there is an approach of compreensiveness in situations like: increase of the access and covering in the Family Health Strategy (ESF Estratégia Saúde da Família, Brazil); larger approach between professional and user; tendency to the quantitative and qualitative growth of specialized actions; punctual initiatives of relationships among levels; existence of protocol to guide professionals

No pulsar da clínica: a repetição e as produções corporais de uma criança

This study investigates the Repetition of movements shown in a stereotypical case of a child three years old. In line with the psychoanalysis model of search, this work presents fragments of the clinic process, the locus for the observation of repetitive, ritualized and choreographically movements of this child who used not to speak. The contrast between their movements and the issuance of a word verbalized at the end of the treatment caused the following question: repetition in this child production would be a reproduction of the same or would be directing for the difference? In the psychiatric speech, the stereotypes are listed as diagnostic criteria for certain mental disorders. In the psychoanalysis studies a question about the psych nature of ritualistic gestures apparently without purpose or direction is included. Thus, the route followed was the reading of the theoretical concept of repetition in the psychoanalytic works of S. Freud and J. Lacan. With Freud, the repetition is linked to the transfer and resistance. In that context, when it appears in act, in the place of the talk, it constitutes a particular way of remembering. But the existence of a force in the psychic apparatus that acts independent and involuntarily of the Principle of pleasure (the repetition compulsion) subsidizes the discovery of Freudian pulsion of death that is the tendency to return to itself. In the Lacan reading, the function of Repetition is magnified, as it fulfils two functions: the automaton - reminders of repetitive signs, and that the service of tiqué - the meeting of the subject with his lack constituent. In this sense, repetition is not simply a reproduction, but the search for new, the difference, caused by the lack of continuity that pushes the circuit. Finally, the clinic process and the theoretical readings made the comprehension of the child repetitive and choreographically movements and the pronouncement of a "good-bye", full of meaning. This repetitive scenario which is full of questions, by this very nature, insists in remains inconclusive

Java-XSC : módulo complexo e complexo intervalar

This work aims to develop modules that will increase the computational power of the Java-XSC library, and XSC an acronym for "Language Extensions for Scientific Computation . This library is actually an extension of the Java programming language that has standard functions and routines elementary mathematics useful interval. in this study two modules were added to the library, namely, the modulus of complex numbers and complex numbers of module interval which together with the modules original numerical applications that are designed to allow, for example in the engineering field, can be used in devices running Java programs

Efeito tardio e imediato da sutura em tendão extrassinovial íntegro: estudo biomecânico em ratos

OBJETIVO: O objetivo do estudo foi avaliar o efeito, nas propriedades mecânicas, do arranjo de reparo com material de sutura, no tendão calcâneo de rato, na ausência de processo de cicatrização. MÉTODO: Foram utilizados 12 ratos machos da linhagem Wistar. Os animais foram submetidos à colocação de ponto de sutura tipo Kessler modificado no tendão calcâneo. Os sacrifícios foram realizados nos períodos imediato e com seis semanas de pós-operatório. As propriedades mecânicas estudadas foram: carga máxima, tensão na carga máxima e módulo de elasticidade. O tendão contralateral foi usado como controle. RESULTADOS: A análise estatística indicou que, em relação aos períodos estudados, os valores das propriedades mecânicas não apresentaram diferenças significativas. em relação ao controle, isto é, tendão contralateral sem sutura, os resultados demonstram que, com seis semanas de pós-operatório, houve queda dos valores do módulo de elasticidade, enquanto a carga máxima e a tensão na carga máxima não apresentaram variações significativas. CONCLUSÃO: A colocação de material de sutura em tendão extrassinovial não lesado provocou queda do módulo de elasticidade, porém não interferiu na carga máxima e na tensão na carga máxima após seis semanas de pós-operatório.

Dinâmica e estrutura de redes complexas no modelo de afinidade

In this work we elaborate and discuss a Complex Network model which presents connectivity scale free probability distribution (power-law degree distribution). In order to do that, we modify the rule of the preferential attachment of the Bianconi-Barabasi model, including a factor which represents the similarity of the sites. The term that corresponds to this similarity is called the affinity, and is obtained by the modulus of the difference between the fitness (or quality) of the sites. This variation in the preferential attachment generates very interesting results, by instance the time evolution of the connectivity, which follows a power-law distribution ki / ( t t0 )fi, where fi indicates the rate to the site gain connections. Certainly this depends on the affinity with other sites. Besides, we will show by numerical simulations results for the average path length and for the clustering coefficient

Nucleação de vortices em nanoelementos elípticos

The present work reports a theoretical study of the vortex nucleation in elliptical nanoelements of iron with the dimensions of the principal and secondary axes in the range of hundreds of nanometers. It will be divided into three steps: first of all, a general panorama and a justification for the interest of the study of nanosystems and their applications. Second, a explanation about the computational simulations applied for the calculations of the remanent states after the saturation in a external field which value is grater then the exchange field of the material for nanoelements coupled or not to a antiferromagnetic substrate. Systems with that range of axes dimensions and height in the range of a few dozens of nanometers have a natural tendency to nucleate closed magnetic ux, like vortex. Third, we will emphasize the nucleation of double vortex, the main types and the dimensions in which they occur (phase diagram) and the factors that may in uence in the nucleation and control of the remanent state. We shown that we can control specially the distance between the vortex cores changing the value of the interface field. Finally, we present a expectative of continuity of this work with objectives and applications