Desenvolvimento de uma rota química alternativa de síntese de SrCo0,8Fe0,2O3- e LaNi0,3Co0,7O3- para aplicação na reação de oxidação do CO

This thesis focuses on the coprecipitation synthesis method for preparation of ceramic materials with perovskite structure, their characterization and application as catalytic material in the reaction of converting CO to CO2 developing a methodological alternative route of synthesis from the middle via oxalate coprecipitation material SrCo0,8Fe0,2O3-d. In order to check the influence of this method, it was also synthesized using a combined citrate - EDTA complexing method. The material was characterized by: X-ray diffraction (XRD), Rietveld refinement method, thermogravimetry and differential thermo analysis (TG / DTA), scanning (SEM) and transmission (TEM) electron microscopy, particle size distribution and surface analysis method BET. Both methods led to post-phase synthesis, with pH as a relevant parameter. The synthesis based on the method via oxalate coprecipitation among particles led to the crystalline phase as those obtained using a combined citrate - EDTA complexing method under the same conditions of heat treatment. The nature of the reagent used via oxalate coprecipitation method produced a material with approximately 80 % lower than the average size of crystallites. Moreover, the via oxalate coprecipitation method precursors obtained in the solid state at low temperature (~ 26 oC), shorter synthesis, greater thermal stability and a higher yield of around 90-95 %, maintaining the same order of magnitude the crystallite size that the combined citrate - EDTA complexing method. For purposes of comparing the catalytic properties of the material was also synthesized by the using a combined citrate - EDTA complexing method. The evaluation of catalytic materials SrCo0,8Fe0,2O3-d LaNi0,3Co0,7O3-d was accompanied on the oxidation of CO to CO2 using a stainless steel tubular reactor in the temperature range of 75-300 oC. The conversion CO gas was evaluated in both materials on the results shaved that the firm conversion was loves for the material LaNi0,3Co0,7O3-d

The influence of daily application of fluoride products on subsurface bovine enamel lesions stored in saliva substitutes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structure of human PNP complexed with ligands

Purine nucleoside phosphorylase (PNP) is a key enzyme in the purine-salvage pathway, which allows cells to utilize preformed bases and nucleosides in order to synthesize nucleotides. PNP is specific for purine nucleosides in the beta-configuration and exhibits a strong preference for purines containing a 6-keto group and ribosyl-containing nucleosides relative to the corresponding analogues. PNP was crystallized in complex with ligands and data collection was performed using synchrotron radiation. This work reports the structure of human PNP in complex with guanosine (at 2.80 angstrom resolution), 3' deoxyguanosine (at 2.86 angstrom resolution) and 8-azaguanine (at 2.85 angstrom resolution). These structures were compared with the PNP-guanine, PNP-inosine and PNP-immucillin-H complexes solved previously.

Evaluation of Brazilian woods as an alternative to oak for cachacas aging

Cachaca was aged for 6 months in small casks of oak and eight different Brazilian woods (amarelo, amendoim, balsamo, jatoba, louro, pau d'arco, pau d'oleo, and pereiro) in order to determine total phenols, UV-visible spectra differences, and sensorial acceptance. Also used were 200-l casks of oak and pereiro for aging cachaca for 4 years to characterize sensorial descriptors and acceptance. The results suggest that amendoim and pereiro followed by jatobaa are good candidates to replace oak in the construction of cachaca aging casks. It was also observed that when using oak casks as a standard the major changes in the sensory properties occurred in the first 21 months of aging. The principal components analysis of UV-visible absorption spectra of the same beverage stored in casks made of different woods allowed identification of the wood in which the beverage had been aged.

Diversidade de ácaros (Acari, Arachnida) em seringueiras (Hevea brasiliensis Muell. Arg., Euphorbiaceae) na região noroeste do Estado de São Paulo, Brasil

The mites of three rubber tree cultures (Cedral, Pindorama and Taquaritinga) in order to determine the abundance of populations, the richness, the diversity and the degree of similarity among the communities was studied. Twenty one species were found, five of which were common to the three cultures. The richness and the abundance were greatest at the beginning of the dry season. The composition of communities differed probably as consequence of the kind of neighboring vegetation to each area, and because of the acaricid pulverization on the culture of Taquaritinga, reductng the richness of mite species in that area. The influence of neighboring vegetation can be shown by the occurrence of Iphiseiodes zuluagui Denmark & Muma, 1972, a common species to citrus trees, on neighboring rubber trees in Taquaritinga, and Tenuipalpus heveae Baker, 1945, a common species on rubber trees, on a coffee culture neighbor to the rubber trees of Pindorama. This data suggests that mites move among neighbor cultures, and can be an importam factor towards pest management and control. The diversity was small on the three cultures, as a result of the occurrence of one dominam species on each area, Calacarus heveae Feres, 1992 or T. heveae, which are considered pests of the rubber tree. The small diversity and the occurrence of dominant species are patterns expected in monocultures, systems with small environmental heterogeneity.

Measurements of inclusive W plus jets production rates as a function of jet transverse momentum in p(p)over-bar collisions root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

New class of spin projection operators for 3D models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fertility tables of two populations of the parthenogenetic species Poratia salvator (Diplopoda, Polydesmida, Pyrgodesmidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variação sazonal da concentração de macronutrientes em folhas de diferentes genótipos de aceroleira

A aceroleira produz durante o ano inteiro, e seus frutos são ricos em vitaminas e sais minerais. Para a obtenção de produções elevadas e frutos de boa qualidade, é necessário conhecer as necessidades nutricionais e as épocas mais apropriadas para a adubação das plantas. Este trabalho, conduzido em área do Campo Experimental da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Agroindústria Tropical, em Pacajus, Ceará, de dezembro de 1999 a outubro de 2000, teve por objetivo estudar a variação sazonal dos teores de nutrientes (N, P, K, Ca, Mg e S) e determinar a época mais indicada para a análise foliar de seis genótipos (P 52, P 66, P 78, P 91, P 93 e P 97) de aceroleira (Malpighia emarginata D.C.). Adotou-se o delineamento de blocos ao acaso, em esquema de parcelas subdivididas no tempo, com 4 repetições e uma planta por unidade experimental. Existem poucas diferenças no teor de macronutrientes das folhas de distintos genótipos de aceroleiras. O mês de dezembro é a época mais apropriada para diagnosticar os teores de macronutrientes em genótipos de aceroleira no Estado do Ceará, pois é o período menos influenciado pela falta ou excesso de chuva ou pela demanda dos órgãos em formação na planta.

Efeitos da infusão contínua de propofol ou etomidato sobre variáveis intracranianas em cães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crescimento pós-natal do coelho Norfolk: correlação entre parâmetros somáticos e área dos tipos de fibras musculares

Skeletal muscle fibers areas, the weight of body, carcass and muscle, the gastric content and the length of intestines and caecum of Norfolk rabbit from neonate to 26th week were measured. Types of fibers and areas were studied in -70-degrees-C frozen blocks of flexor carpo radialis muscle. Some sections were stained with Haematoxylin and Eosin and others were submitted to SDH, NADH-TR and m-ATPase, followed by acid and alkali preincubations. All parameters revealed a high degree of correlation. Carcass weight/body weight ratio reached 55,1% at 10th week. From neonate to 26th week, the areas of SO, FOG and FG muscle fibers increased of x9.1, x12.4 and x22.2. While SO and FOG fibers tend to stabilize their growth at 10th week, FG fibers were active at this age. Due to early stabilization of SO and FOG fibers growth, the additional increase in muscle tissue in attributed mainly to hypertrophy of FG fibers.

Theoretical study of MgO(001) surfaces: Pure, doped with Fe, Ca, and Al, and with and without adsorbed water

Ab initio calculations of large cluster models have been performed in order to study water adsorption at the five-fold coordinated adsorption site on pure Mg(001) and MgO(001) surfaces doped with Fe, Ca, and Al. The geometric parameters of the adsorbed water molecule have been optimized preparatory to analysis of binding energies, charge transfer, preferential sites of interaction, and bonding distances. We have used Mulliken population analysis methods in order to analyze charge distributions and the direction of charge transfer. We have also investigated energy gaps, HOMO energies, and SCF orbital energies as well as the acid-base properties of our cluster model. Numerical results are compared, where possible, with experiment and interpreted in the framework of various analytical models. (C) 2001 John Wiley & Sons, Inc.

Genetic parameters for milk yield, age at first calving and interval between first and second calving in milk buffaloes

Genetic parameters for the relation between the traits of milk yield (MY), age at first calving (AFC) and interval between first and second calving (IBFSC) were estimated in milk buffaloes of the Murrah breed. In the study, data of 1578 buffaloes at first lactation, with calvings from 1974 to 2006 were analyzed. The MTDFREML system was used in the analyses with models for the MY, IBFSC traits which included the fixed effects of herd-year-season of calving, linear and quadratic terms of calving age as covariate and the random animal effects and error. The model for AFC consisted of the herd-year-season fixed effects of calving and the random effects of animal and error. Heritability estimates MY, AFC and IBFSC traits were 0.20, 0.07 and 0.14, respectively. Genetic and phenotypic correlations between the traits were: MY and AFC = -0.12 and -0.15, MY and IBFSC = 0.07 and 0.30, AFC and IBFSC = 0.35 and 0.37, respectively. Genetic correlation between MY and AFC traits showed desirable negative association, suggesting that the daughters of the bulls with high breeding value for MY could be physiological maturity to a precocious age. Genetic correlation between MY and IBFSC showed that the selection of the animals that increased milk yield is also those that tend to intervals of bigger calving.

Er-doped silica-based waveguides prepared by different techniques: RF-sputtering, sol-gel and ion-exchange

Erbium-activated silica-based planar waveguides were prepared by three different technological routes: RF-sputtering, sol-gel and ion exchange. Various parameters of preparation were varied in order to optimize the waveguides for operation in the NIR region. Particular attention was devoted to the minimization of the losses and the increase of the luminescence efficiency of the metastable I-4(13/2) state of the Er3+ ion. Waveguide properties were determined by m-line spectroscopy and loss measurements. Waveguide Raman and luminescence spectroscopy were used to obtain information about the structure of the prepared films and about the dynamical processes related to the luminescence of the Er3+ ions.

Evaluation of laser level populations of erbium-doped glasses

A simulation of erbium-doped glass systems, which provides population density for the excited states involved in the 1.5 mu m and also for 2.7 mu m emissions when pumped around 980 nm, is presented. To describe the diode pump laser processes, a theoretical model based in a coupled system of differential rate equations was developed. The approach used and the obtained spectroscopic parameters are discussed. The materials under study are two oxide glasses, lead fluoroborate (PbO-PbF2-B2O3), and heavy metal oxide (Bi2O3 PbO-Ga2O3) and a fluoride glass (ZrF4-BaF2-LaF3-AlF3-NaF), all of them doped with Er3+. (c) 2006 Elsevier B.V. All rights reserved.