Building a Social Education curriculum based on Professional Competences : the experience of University of Girona

This article describes the process of adapting Social Education studies to the European Higher Education Area undertaken by a team of the teaching staff at the University of Girona (Spain). The aim of the experience is to build a curriculum based on thecompetencies recognized as such by professionals in the field of social education in our region. The article specifies the development of the various phases, each involving the active participation of professionals and teaching staff from the universities. To conclude, main characteristics of the curriculum are highlighted

Coexistence of Two Kinds of Fluorinated Hydrogenated Micelles as Building Blocks for the Design of Bimodal Mesoporous Silica with Two Ordered Mesopore Networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building block. The investigation of the RF8(EO)9/P123/water phase diagram evidences that in the considered surfactant range of concentrations, the system is micellar (L1). DLS measurements indicate that this micellar phase is composed of two types of micelles, the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles which have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica are really templated by two kinds of micelles.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

The governmental organization's role in railway freight market's liberalization -building knowledge through Swedish and Polish operators' experiences

Globalization has increased transport aggregates’ demand. Whilst transport volumes increase, ecological values’im portance has sharpened: carbon footprint has become a measure known world widely. European Union together with other communities emphasizes friendliness to the environment: same trend has extended to transports. As a potential substitute for road transport is noted railway transport, which decreases the congestions and lowers the emission levels. Railway freight market was liberalized in the European Union 2007, which enabled new operators to enter the markets. This research had two main objectives. Firstly, it examined the main market entry strategies utilized and the barriers to entry confronted by the operators who entered the markets after the liberalization. Secondly, the aim was to find ways the governmental organization could enhance its service towards potential railway freight operators. Research is a qualitative case study, utilizing descriptive analytical research method with a normative shade. Empirical data was gathered by interviewing Swedish and Polish railway freight operators by using a semi-structured theme-interview. This research provided novel information by using first-hand data; topic has been researched previously by utilizing second-hand data and literature analyses. Based on this research, rolling stock acquisition, needed investments and bureaucracy generate the main barriers to entry. The research results show that the mostly utilized market entry strategies are start-up and vertical integration. The governmental organization could enhance the market entry process by organizing courses, paying extra attention on flexibility, internal know-how and educating the staff.

Improving Label Space Usage for Ethernet Label Switched Paths

Ethernet is becoming the dominant aggregation technology for carrier transport networks; however, as it is a LAN technology, native bridged ethernet does not fulfill all the carrier requirements. One of the schemes proposed by the research community to make ethernet fulfill carrier requirements is ethernet VLAN-label switching (ELS). ELS allows the creation of label switched data paths using a 12-bit label encoded in the VLAN TAG control information field. Previous label switching technologies such as MPLS use more bits for encoding the label. Hence, they do not suffer from label sparsity issues as ELS might. This paper studies the sparsity issues resulting from the reduced ELS VLAN-label space and proposes the use of the label merging technique to improve label space usage. Experimental results show that label merging considerably improves label space usage

Building wood debris piles benefits avian seed dispersers in burned and logged Mediterranean pine forests

Salvage logging is a common practice carried out in burned forests worldwide, and intended to mitigate the economic losses caused by wildfires. Logging implies an additional disturbance occurring shortly after fire, although its ecological effects can be somewhat mitigated by leaving wood debris on site. The composition of the bird community and its capacity to provide ecosystem services such as seed dispersal offleshy-fruited plants have been shown to be affected by postfire logging. We assessedthe effects of the habitat structure resulting from different postfire management practices on the bird community, in three burned pine forests in Catalonia (western Mediterranean). For this purpose, we focused on the group of species that is responsible for seed dispersal, a process which takes place primarily during the winter in theMediterranean basin. In addition, we assessed microhabitat selection by seed disperser birds in such environments in relation to management practices. Our results showed a significant, positive relationship between the density of wood debris piles and the abundance of seed disperser birds. Furthermore, such piles were the preferredmicrohabitat of these species. This reveals an important effect of forest management on seed disperser birds, which is likely to affect the dynamics of bird-dependent seed dispersal. Thus, building wood debris piles can be a useful practice for the conservation of both the species and their ecosystem services, while also being compatible with timber harvesting

Building complexity in O2-binding copper complexes : site-selective metalation and intermolecular O2-binding at dicopper and heterometallic complexes derived from an unsymmetric ligand

A novel unsymmetric dinucleating ligand (LN3N4) combining a tridentate and a tetradentate binding sites linked through a m-xylyl spacer was synthesized as ligand scaffold for preparing homo- and dimetallic complexes, where the two metal ions are bound in two different coordination environments. Site-selective binding of different metal ions is demonstrated. LN3N4 is able to discriminate between CuI and a complementary metal (M′ = CuI, ZnII, FeII, CuII, or GaIII) so that pure heterodimetallic complexes with a general formula [CuIM′(LN3N4)]n+ are synthesized. Reaction of the dicopper(I) complex [CuI 2(LN3N4)]2+ with O2 leads to the formation of two different copper-dioxygen (Cu2O2) intermolecular species (O and TP) between two copper atoms located in the same site from different complex molecules. Taking advantage of this feature, reaction of the heterodimetallic complexes [CuM′(LN3N4)]n+ with O2 at low temperature is used as a tool to determine the final position of the CuI center in the system because only one of the two Cu2O2 species is formed

Building the map of innovation for membrane materials (Ceramic membranes)

This work proposes a method of visualizing the trend of research in the field of ceramic membranes from 1999 to 2006. The presented approach involves identifying problems encountered during research in the field of ceramic membranes. Patents from US patent database and articles from Science Direct(& by ELSEVIER was analyzed for this work. The identification of problems was achieved with software Knowledgist which focuses on the semantic nature of a sentence to generate series of subject action object structures. The identified problems are classified into major research issues. This classification was used for the visualization of the intensity of research. The image produced gives the relation between the number of patents, with time and the major research issues. The identification of the most cited papers which strongly influence the research of the previously identified major issues in the given field was also carried out. The relations between these papers are presented using the metaphor of social network. The final result of this work are two figures, a diagram showing the change in the studied problems a specified period of time and a figure showing the relations between the major papers and groups of the problems

Eficiència energètica aplicada a les instal·lacions de la Universitat de Vic

En termes generals, es pot definir l’Eficiència Energètica com la reducció del consum d’energia mantenint els mateixos serveis energètics, sense disminuir el nostre confort i qualitat de vida, protegint el medi ambient, assegurant el proveïment i fomentant un comportament Sostenible al seu ús. L’objectiu principal d’aquest treball, és reduir el consum d’energia i terme de potència contractat a la Universitat de Vic, aplicant un programa d’estalvi amb mesures correctores en el funcionament de les seves instal·lacions o espais. Per tal de poder arribar a aquest objectiu marcat, prèviament s’ha realitzat un estudi acurat, obtenint tota la informació necessària per poder aplicar les mesures correctores a la bossa més important de consum. Un cop trobada, dur a terme l’estudi de la viabilitat de la inversió de les mesures correctores més eficients, optimitzant els recursos destinats. L’espai on s’ha dut a terme l’estudi, ha estat a l’edifici F del Campus Miramarges, seguint les indicacions d’Arnau Bardolet (Cap de Manteniment de la UVIC). Aquest edifici consta d’un entresol, baixos i quatre plantes. L’equip de mesura que s’ha fet servir per realitzar l’estudi, és de la marca Circutor sèrie AR5-L, aquests equips són programables que mesuren, calculen i emmagatzemen en memòria els principals paràmetres elèctrics en xarxes trifàsiques. Els projectes futurs complementaris que es podrien realitzar a part d’aquest són: instal·lar sensors, instal·lar mòduls convertidors TCP/IP, aprofitar la xarxa intranet i crear un escada amb un sinòptic de control i gestió des d’un punt de treball. Aquest aplicatiu permet visualitzar en una pantalla d’un PC tots els estats dels elements controlats mitjançant un sinòptic (encendre/parar manualment l’enllumenat i endolls de les aules, estat d’enllumenat i endolls de les aules, consums instantanis/acumulats energètics, estat dels passadissos entre altres) i explotar les dades recollides a la base de dades. Cada espai tindria la seva lògica de funcionament automàtic específic. Entre les conclusions més rellevants obtingudes en aquest treball s’observa: · Que és pot reduir la potència contractada a la factura a l’estar per sota de la realment consumida. · Que no hi ha penalitzacions a la factura per consum de reactiva, ja que el compensador funciona correctament. · Que es pot reduir l’horari de l’inici del consum d’energia, ja que no correspon a l’activitat docent. · Els valors de la tensió i freqüència estan dintre de la normalitat. · Els harmònics estan al llindar màxim. Analitzant aquestes conclusions, voldria destacar les mesures correctores més importants que es poden dur a terme: canvi tecnològic a LED, temporitzar automàticament l’encesa i apagada dels fluorescents i equips informàtics de les aules “seguint calendari docent”, instal·lar sensors de moviment amb detecció lumínica als passadissos. Totes les conclusions extretes d’aquest treball, es poden aplicar a tots els edificis de la facultat, prèviament realitzant l’estudi individual de cadascuna, seguint els mateixos criteris per tal d’optimitzar la inversió.

Lämpöpumppujen vaikutukset sähköverkkoliiketoiminnan kannalta

Energiatehokkuus sekä ilmastonmuutos ovat aiheuttaneet pyrkimyksen vähentää kokonaisenergiankulutuksia erilaisissa rakennuksissa. Lämmitysjärjestelmissä tämä on näkynyt voimakkaana lämpöpumppumäärien kasvuna. Lämpöpumput vaikuttavat erilaisissa rakennus- ja lämmitystyypeissä myös sähköenergiankulutukseen. Lämpöpumppujen käytöstä saadaan eniten hyötyä lämmityskustannuksiin sähkölämmitteisissä rakennuksissa. Seurauksena on, että tällaisen rakennuksen sähkönkulutus ja siten myös sähkölasku pienenevät. Toisaalta muihin kuin sähkölämmitteisiin rakennuksiin asennettu lämpöpumppu kasvattaa sähköenergiankulutusta. Lämpöpumppuihin integroitu jäähdytysominaisuus myös tavallisesti lisää sähkönkulutusta. Tämän tutkimuksen tarkoituksena on selvittää, kuinka lämpöpumput vaikuttavat sähköenergiankulutukseen. Vaikutuksia tutkitaan sähköverkkoyhtiöiden kannalta sähköenergian ja liikevaihdon osalta. Tarkastelussa käytetään neljää yleisintä lämpöpumpputyyppiä, ja niiden toimintaa verrataan eri rakennustyyppien lämmitysjärjestelmiin. Työssä käsitellään lämpöpumppujen toimintaa ja käytettävyyttä muiden lämmitysmenetelmien korvaajina tai lisänä. Tämän kirjallisen työn lisäksi on tehty laskentaohjelma, joka on perusteena työssä esitetyille tuloksille. Sen tarkoituksena on selvittää lämpöpumppujen vaikutukset sähköverkkoliiketoimintaan energiayhtiöissä. Vaikutukset yksittäiseen energiayhtiöön ovat eniten riippuvaisia lämpöpumppujen asennuskohteista, lämpöpumppujen toiminnasta ja lämpöpumpputyypistä. Kuluttajat tulevat määräämään vaikutusten suuruuden, koska lämpöpumppujen lukumäärällä ja käytöllä on sähköenergiankulutukseen huomattava merkitys. Vaikutus sähköenergiaan energiayhtiöiden kannalta voi yleisesti ottaen olla 2020-luvulle mentäessä merkittävä. Tutkittavassa verkkoyhtiössä vaikutuksen sähköenergiaan arvioidaan olevan 10 % luokkaa yhdeltä vuodelta verrattuna tämän päivän kokonaissähköenergiankulutukseen. Vaikutus verkkoliikevaihtoon on arviolta puolet pienempi. Tällaiset tulokset edellyttävät lämpöpumppumäärän moninkertaistumista nykyisestä, mikä on myös odotettavissa.

Toiminnanohjausjärjestelmän laajentaminen tuotannonohjaukseen

Diplomityössä perehdytään rakennustuotteita valmistavan teollisuusyrityksen toiminnanohjausjärjestelmän laajentamiseen tuotannonohjaukseen. Järjestelmä on tällä hetkel-lä valjastettu vain hallinnolliseen käyttöön, eli tarjouspyyntöjen ja myyntitilauksien kirjaamiseen, laskutukseen ja reskontraan. Järjestelmän laajentamista tuotantoon puoltaa hankalasti ennustettavat toimitusajat ja kapasiteetin käyttöasteen hahmotettavuus. Laajentaminen on määrä toteuttaa vaiheittain, ensimmäisenä yrityksen suurimman liikevaihdon tekevällä osastolla. Diplomityön ensimmäinen tavoite oli selvittää teoriaosuuden avulla toiminnanohjausjärjestelmään liittyvät keskeiset asiat, joiden pohjalta laajentamista alettiin suunnitella. Lisäksi selvitettiin toiminnanohjausjärjestelmien käyttöönottojen epäonnistumisiin johtaneita syitä. Suurimmiksi syiksi on havaittu epärealistiset odotukset, projektin jättäminen vain atk-osaston huoleksi sekä johdon tuen puuttu-minen. Toisessa vaiheessa tavoitteena oli laatia suunnitelma, jonka perusteella laajentaminen on tarkoitus tehdä yrityksen ensimmäisellä käyttöönotto-osastolla. Tärkeimmät huomioitavat seikat ovat kuormitusryhmien suunnittelu, kuormitusryhmien sisäiset kuormituspisteet ja tuotteiden valmistusrakenteen järkevä määrittäminen toiminnanohjausjärjestelmään. Case-yrityksessä huomioitavaa oli myös työajanseurantalaitteiston hankinta, joka palvelee samalla toiminnanohjausjärjestelmää työmääräinten kuittaamisessa integroinnin jälkeen. Kolmas vaihe oli tehdä työn perusteella suositukset jatkotoimenpiteille. Järjestelmän toimiessa suunnitellusti ensimmäisellä osastolla, aletaan projektia viedä muille osastoille. Lisäksi suositellaan toiminnanohjausjärjestelmän laajentamista varastoihin sekä ostoihin, jotta materiaalinkulutuksesta saadaan mahdollisimman paljon tietoa.

The Contribution of Mobile Device Manufacturers’ Site Usage to Brand Satisfaction and Loyalty

Recently most of the mobile phone manufacturer companies started to pay extra attention to their websites. This research investigates the sources of value creation on the mobile phone manufacturers’ website and the affect visiting the manufacturers’ website has on brand loyalty and brand satisfaction. The results show a correlation between positive website usage experience, brand loyalty and brand satisfaction. Moreover there is a relation between Novelty, Efficiency, Lock-in and the perceived usefulness the manufacturers’ website has on the mobile phone device. And finally the main reason behind Finnish student’s mobile phone brand loyalty is its country of origin.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

Distributed ControlArchitecture of Power Electronics Building-Block-Based Frequency Converters

The increasing power demand and emerging applications drive the design of electrical power converters into modularization. Despite the wide use of modularized power stage structures, the control schemes that are used are often traditional, in other words, centralized. The flexibility and re-usability of these controllers are typically poor. With a dedicated distributed control scheme, the flexibility and re-usability of the system parts, building blocks, can be increased. Only a few distributed control schemes have been introduced for this purpose, but their breakthrough has not yet taken place. A demand for the further development offlexible control schemes for building-block-based applications clearly exists. The control topology, communication, synchronization, and functionality allocationaspects of building-block-based converters are studied in this doctoral thesis. A distributed control scheme that can be easily adapted to building-block-based power converter designs is developed. The example applications are a parallel and series connection of building blocks. The building block that is used in the implementations of both the applications is a commercial off-the-shelf two-level three-phase frequency converter with a custom-designed controller card. The major challenge with the parallel connection of power stages is the synchronization of the building blocks. The effect of synchronization accuracy on the system performance is studied. The functionality allocation and control scheme design are challenging in the seriesconnected multilevel converters, mainly because of the large number of modules. Various multilevel modulation schemes are analyzed with respect to the implementation, and this information is used to develop a flexible control scheme for modular multilevel inverters.