Alignment of nanoparticles formed on the surface of 6H-SiC crystals irradiated by two collinear femtosecond laser beams

Nanoripples with periods of 150 and 80 nm are formed on the surface of 6H-SiC crystals irradiated by the p-polarized 800 nm and the s-polarized 400 nm femtosecond lasers, respectively. When both of the two collinear laser beams focus simultaneously on the sample surface, nanoparticles are formed on the whole ablation area, and they array in parallel lines. We propose and confirm that the second harmonics in the sample surface excited by the incident lasers plays an important role in the formation of nanostructures.

飞秒激光的波长对SiC材料烧蚀的影响

利用10倍的显微物镜将近红外飞秒激光脉冲汇聚到宽带隙半导体材料6HSiC的前表面，研究样品的烧蚀及诱导微细结构。用扫描电镜（Scanning electron microscope，SEM）及光学显微镜测量烧蚀斑。利用烧蚀面积与激光脉冲能量的关系确定SiC的烧蚀阈值。给出了SiC样品的烧蚀阈值与飞秒激光波长的依赖关系。实验结果表明，可见光区随波长增加，烧蚀阈值从0．29J／cm^2增加到0．67J／cm^2；而在近红外区，SiC的烧蚀阈值为0．70J／cm^2左右，基本上不随激光波长变化而改变。结合计算结

Optical breakdown of 6H SiC induced by wavelength-tunable femtosecond laser pulses

The damage mechanisms and micromachining of 6H SiC are studied by using femtosecond laser pulses at wavelengths between near infrared (NIR) and near ultraviolet (NUV) delivered from an optical parametric amplifier (OPA). Our experimental results indicate that high quality microstructures can be fabricated in SiC crystals. On the basis of the dependence of the ablated area and the laser pulse energy, the threshold fluence of SiC is found to increase with the incident laser wavelength in the visible region, while it remains almost constant for the NIR laser. For the NIR laser pulses, both photoionization and impact ionization play important roles in electronic excitation, while for visible lasers, photoionization plays a more important role.

Formation mechanisms of uniform arrays of periodic nanoparticles and nanoripples on 6H-SiC crystal surface induced by femtosecond laser ablation

Uniform arrays of periodic nanoparticles with 80-nm period are formed on 6H-SiC crystal irradiated by circularly polarized 400-nm femtosecond laser pulses. In order to understand the formation mechanism, the morphology evolvement as a function of laser pulse energy and number is studied. Periodic nanoripples are also formed on the sample surface irradiated by linearly polarized 400-, 510- and 800-nm femtosecond laser pulses. All these results support well the mechanism that second-harmonic generation plays an important role in the formation of periodic nanostructures.

飞秒激光在6H SiC晶体表面制备纳米微结构

激光诱导周期性纳米微结构在多种材料包括电介质、半导体、金属和聚合物中观察到。研究了800 nm和400 nm飞秒激光垂直聚焦于6H SiC晶体表面制备纳米微结构。实验观察到800 nm和400 nm线偏光照射样品表面分别得到周期为150 nm和80 nm的干涉条纹, 800 nm圆偏振激光单独照射样品表面得到粒径约100 nm的纳米颗粒。偏振相互垂直的800 nm和400 nm激光同时照射晶体得到粒径约100 nm的纳米颗粒阵列, 该纳米阵列的方向随400 nm激光强度增加而向400 nm偏振方向偏转。利

单束、多束飞秒激光在CdS,SiC和GaN表面诱导一维和二维纳米周期结构

报道了单光束、双光束和三光束飞秒激光在CdS,GaN,SiC样品上诱导形成周期远小于激光波长的纳米周期结构.研究表明,其形成机制不同于入射光与表面散射光干涉的经典机制,二次谐波的产生可能在其中起着重要作用;双光束激光干涉在SiC晶体表面诱导形成二维微米-纳米复合周期结构,干涉花样决定微米长周期结构,长周期结构的烧蚀斑上形成了短周期的自组织纳米结构.在上述研究基础上,初步探索三光束干涉形成二维、三维微米-纳米复合周期结构.

High-strain composites and dual-matrix composite structures

Most space applications require deployable structures due to the limiting size of current launch vehicles. Specifically, payloads in nanosatellites such as CubeSats require very high compaction ratios due to the very limited space available in this typo of platform. Strain-energy-storing deployable structures can be suitable for these applications, but the curvature to which these structures can be folded is limited to the elastic range. Thanks to fiber microbuckling, high-strain composite materials can be folded into much higher curvatures without showing significant damage, which makes them suitable for very high compaction deployable structure applications. However, in applications that require carrying loads in compression, fiber microbuckling also dominates the strength of the material. A good understanding of the strength in compression of high-strain composites is then needed to determine how suitable they are for this type of application.

The goal of this thesis is to investigate, experimentally and numerically, the microbuckling in compression of high-strain composites. Particularly, the behavior in compression of unidirectional carbon fiber reinforced silicone rods (CFRS) is studied. Experimental testing of the compression failure of CFRS rods showed a higher strength in compression than the strength estimated by analytical models, which is unusual in standard polymer composites. This effect, first discovered in the present research, was attributed to the variation in random carbon fiber angles respect to the nominal direction. This is an important effect, as it implies that microbuckling strength might be increased by controlling the fiber angles. With a higher microbuckling strength, high-strain materials could carry loads in compression without reaching microbuckling and therefore be suitable for several space applications.

A finite element model was developed to predict the homogenized stiffness of the CFRS, and the homogenization results were used in another finite element model that simulated a homogenized rod under axial compression. A statistical representation of the fiber angles was implemented in the model. The presence of fiber angles increased the longitudinal shear stiffness of the material, resulting in a higher strength in compression. The simulations showed a large increase of the strength in compression for lower values of the standard deviation of the fiber angle, and a slight decrease of strength in compression for lower values of the mean fiber angle. The strength observed in the experiments was achieved with the minimum local angle standard deviation observed in the CFRS rods, whereas the shear stiffness measured in torsion tests was achieved with the overall fiber angle distribution observed in the CFRS rods.

High strain composites exhibit good bending capabilities, but they tend to be soft out-of-plane. To achieve a higher out-of-plane stiffness, the concept of dual-matrix composites is introduced. Dual-matrix composites are foldable composites which are soft in the crease regions and stiff elsewhere. Previous attempts to fabricate continuous dual-matrix fiber composite shells had limited performance due to excessive resin flow and matrix mixing. An alternative method, presented in this thesis uses UV-cure silicone and fiberglass to avoid these problems. Preliminary experiments on the effect of folding on the out-of-plane stiffness are presented. An application to a conical log-periodic antenna for CubeSats is proposed, using origami-inspired stowing schemes, that allow a conical dual-matrix composite shell to reach very high compaction ratios.

Part I. Influence of membrane morphology on ion-exchange and charge propagation in composite polyelectrolyte electrode coatings. Part II. Dynamic surface tension measurements of polarization relaxation at mercury pool electrodes by the method of Wilhelmy.

Part I. Novel composite polyelectrolyte materials were developed that exhibit desirable charge propagation and ion-retention properties. The morphology of electrode coatings cast from these materials was shown to be more important for its electrochemical behavior than its chemical composition.

Part II. The Wilhelmy plate technique for measuring dynamic surface tension was extended to electrified liquid-liquid interphases. The dynamical response of the aqueous NaF-mercury electrified interphase was examined by concomitant measurement of surface tension, current, and applied electrostatic potential. Observations of the surface tension response to linear sweep voltammetry and to step function perturbations in the applied electrostatic potential (e.g., chronotensiometry) provided strong evidence that relaxation processes proceed for time-periods that are at least an order of magnitude longer than the time periods necessary to establish diffusion equilibrium. The dynamical response of the surface tension is analyzed within the context of non-equilibrium thermodynamics and a kinetic model that requires three simultaneous first order processes.

Análise do nível de aderência do modelo conceitual do sistema de custos às teorias da contabilidade de custo: experiência no governo federal para configuração e implantação do sistema de informações de custos - SIC

Este estudo expõe os objetivos, as diretrizes, o modelo conceitual e o processo desenvolvido para a implantação do Sistema de Informações de Custos do Governo Federal (SIC), descrevendo e explicando o marco conceitual e suas principais características, a abordagem em três dimensões (conceitual, tecnológica e cultural), as razões para os procedimentos adotados na sua construção, trabalhando a correspondência entre os conceitos da contabilidade governamental e da contabilidade de custos. O trabalho teve como proposta identificar e apresentar a configuração do sistema de informações de custos (SIC) a ser adotado pelo Brasil no âmbito da Administração Pública Federal como uma solução conciliatória junto aos atores envolvidos, e analisar e revelar o nível de aderência do SIC às teorias da Contabilidade de Custos, para tal fim foi desenvolvida a pesquisa exploratóriodescritiva, socorrendo-se em pesquisas bibliográfica e documental; na coleta de informações aplicando as técnicas de entrevista e observação direta intensiva; e na análise dos dados levantados, a técnica de análise de conteúdo. A importância do SIC é enfatizada como elemento de mensuração de custos, de melhoria da qualidade do gasto público e de vetor indutor da construção da mentalidade de custos na Administração Pública Federal que, poderá vir a ser o grande salto da administração patrimonial e burocrática para a administração gerencial.