906 resultados para Work related road safety
Resumo:
Los diques flotantes son estructuras que atenúan la energía del oleaje fundamentalmente por reflexión y turbulencia. Aunque presentan importantes ventajas en términos constructivos y medioambientales, su efectividad es limitada y en la práctica sólo se emplean en condiciones climáticas propias de zonas con oleajes poco energéticos. Por otro lado, el buque es la estructura flotante por excelencia y su empleo para el abrigo portuario y costero en determinadas situaciones puede aportar las ventajas propias de los diques flotantes, al tiempo que ampliar el rango de oleajes frente a los que estas estructuras son efectivas. El propósito de esta Tesis Doctoral es evaluar la viabilidad del empleo de buques fondeados como diques flotantes para el abrigo portuario y costero. Para ello, se han realizado ensayos en modelo físico a escala reducida en un canal de oleaje del Centro de Estudios de Puertos y Costas (CEPYC), con el objeto de determinar los coeficientes de transmisión (Ct), reflexión (Cr) y disipación (Cd) de barcos de diversas tipologías y dimensiones, sometidos a diferentes oleajes en distintas situaciones de carga, fondeo y profundidad del emplazamiento. La efectividad de los buques empleados en los ensayos se ha determinado mediante el análisis de dichos coeficientes y su variación con la altura de ola y el periodo de los oleajes incidentes. Además, se han registrado las fuerzas existentes en las cadenas de fondeo con objeto de comprobar la viabilidad del mismo y facilitar una estimación del diámetro de las cadenas que serían necesarias en cada situación. Posteriormente, se han aplicado los resultados obtenidos en los ensayos en modelo físico reducido a dos situaciones de abrigo portuario y costero. La primera aplicación consiste en el empleo de buques como defensa temporal en fases constructivas por medios marítimos, partiendo de la hipótesis de que, actuando como diques flotantes, puede proteger la zona de la obra y ampliar las ventanas temporales de periodos de actividad en obra marítima. Las actividades que se han analizado son las de dragado de fondos, vertidos de material granular y transporte y fondeo de cajones flotantes para diques y muelles. La segunda aplicación estudiada es el empleo de buques para la protección costera y la formación de salientes y tómbolos. Los coeficientes de transmisión obtenidos se han introducido en formulaciones analíticas que permiten prever la evolución de la costa frente a la protección procurada por el buque actuando como dique flotante exento. Finalmente se han redactado las conclusiones de la investigación y se han propuesto nuevas líneas de investigación relacionadas con esta Tesis Doctoral. Floating breakwaters are structures which attenuate wave energy mainly by reflection and turbulence. They display advantages in terms of construction and ecology, amongst others. However, their use is restricted in practice to certain areas with good climatic conditions and low energy waves. Moreover, ships are the most common floating structures and their use for port and coastal shelter in certain situations could widen the range of applicability in addition to the rest of advantages of floating breakwaters. The purpose of this research is to assess the feasibility of ships anchored as floating breakwaters for port and coastal protection. To that end, tests in a scaled down physical model have been conducted in a wave flume in the Centre of Port and Coastal Studies (CEPYC), in order to determine the transmission (Ct), reflection (Cr) and dissipation (Cd) coefficients of ships of diverse types and dimensions, under different wave, load, anchoring and depth conditions. The effectiveness of the several ships used in the tests has been determined by analyzing these coefficients and their variation with the wave height and period of the incident waves. In addition, the existing forces in the anchor chains have been registered to verify the feasibility of the anchoring systems, as well as to provide an estimation of the diameter of the chains that would be needed in each situation. Subsequently, the results of the tests have been applied to two situations of port and coastal protection. The first one is the use of ships as a temporary defense for maritime works with construction phases by maritime means, on the assumption that, acting as floating breakwaters, they can protect the work area and increase the time windows of periods of activity in maritime works. Dredging, dumping of granular material and transport and positioning of big concrete caissons for docks and breakwaters were the activities analyzed. The second situation is the use of ships for coastal protection and forming salients of sand or tombolos. Some analytical formulations which take into account the transmission coefficients from the tests have been used to predict the evolution of the coastline under the protection given by the ships acting as detached floating breakwaters. Finally, the conclusions of the research have been addressed and the proposal of new lines of work related to the topic has been made.
Resumo:
La siniestralidad por salida izquierda de vía en carreteras de gran capacidad es un problema que, además de las dramáticas situaciones a las que da lugar, inflige a la sociedad elevados costes. Por ello, debe prestarse una intensa atención al diseño de las medianas y a la disposición de barreras en ellas, con el objetivo de evitar que se produzcan este tipo de accidentes y limitar las consecuencias de los que aún así tengan lugar. Habitualmente las medianas de autovías se diseñan aplicando casi sistemáticamente los parámetros mínimos exigidos normativamente y generalmente con barreras de seguridad adosadas o muy próximas a uno de los arcenes interiores. Sin embargo, tanto las recomendaciones técnicas nacionales como la bibliografía internacional recomiendan llevar a cabo un estudio económico de alternativas antes que colocar barreras y, si está justificada su disposición, alejarla de la calzada disponiéndola próxima al eje de la mediana. En esta tesis se analizan las ventajas y limitaciones que tiene la disposición de barrera próxima al eje de la mediana. Se ha investigado sobre el comportamiento de los vehículos al circular por la mediana y se muestra cómo se ha instalado en la obra de la autovía A‐40, Tramo: Villarrubia de Santiago‐Santa Cruz de la Zarza, destacando los aspectos más novedosos y llamativos pero que se ajustan a las mejores prácticas en la materia y también a la normativa de aplicación. ABSTRACT Many dramatic situations are caused by cross‐median traffic accidents which imply high costs for society, both in human and economic terms. It is therefore important that special attention should be paid to the design of highway medians and to the installation of safety barriers so as to avoid these kinds of incidents and to reduce their consequences. Highway median are usually designed with the application of minimum parameters, according to regulations, with the installation of safety barriers against or close to the inside border. However, Spanish technical regulations and international bibliography recommend a prior study to be carried out with the purpose of finding alternatives to this installation of safety barriers and if necessary, the installation of the safety barrier close to the centre of the median. This thesis directs its analysis towards the advantages and restrictions of installing the safety barrier close to the centre of the median. Research has shown vehicle response when within the median and we show the installation of safety barriers in the A‐40 highway stretch: Villarrubia de Santiago – Santa Cruz de la Zarza, highlighting the aspects that should be taken into account as best practices for road safety and technical regulations.
Resumo:
La evolución de los roles de la Administración y empresas en la prestación de servicios públicos, así como las crecientes restricciones presupuestarias para financiarlos, están propiciando una cada vez mayor utilización del sistema concesional para la financiación y gestión de carreteras. Ante esta situación, cabe cuestionarse si la regulación de las prestaciones a obtener se está introduciendo de forma adecuada en los contratos. Uno de los aspectos más relevantes en este sentido es el relacionado con la seguridad de la infraestructura, sobre el cual la empresa concesionaria tiene capacidad de actuación pero, en un sentido económico estricto, pocos incentivos para mejorarla. Todo ello a pesar de los elevados costes sociales derivados de la accidentalidad. Esta tesis analiza la idoneidad de los indicadores e incentivos de seguridad vial que se vienen aplicando en concesiones de carreteras, encontrándose una gran heterogeneidad e incluso incorrecciones técnicas en su formulación. Además se pone de manifiesto la poca vinculación que tienen con la estructura de costes y beneficios de las actuaciones de mejora de seguridad vial, por lo que su introducción en los contratos resulta anodina. Con el objeto de superar esta situación, en esta tesis se analizan en profundidad los aspectos que intervienen en la formulación de indicadores e incentivos de seguridad vial. De este análisis se deduce la ecuación que liga, por tipología de carretera, el beneficio social derivado del nivel de seguridad de la carretera y el coste para alcanzarlo. A través de esta ecuación se determina el nivel de seguridad óptimo desde el punto de vista económico‐social. La investigación continúa extrapolando métodos de la teoría microeconómica de incentivos al campo de las concesiones de carreteras, a fin de determinar la formulación del incentivo de seguridad vial teóricamente óptimo. Asimismo, la tesis toma en consideración la experiencia en la aplicación práctica de incentivos en concesiones vigentes, realizándose una propuesta para superar las controversias que se están produciendo actualmente en España. Además, se ha simulado la aplicación de la formulación propuesta a diversas concesiones con un doble objetivo: verificar la viabilidad económica de su aplicación y corroborar en qué medida se adecua mejor al óptimo económico‐social. Como resultado, se proponen un indicador y un incentivo concretos que inducen a las concesionarias a orientar su gestión hacia la consecución del nivel de seguridad vial óptimo desde el punto de vista económico‐social, todo ello dentro de un marco de viabilidad presupuestaria. Changes in the roles of Government and the Private Sector in the provision of public services along with the budget constraints to finance them are resulting in an increasing use of the concession system for financing and managing roads. Taking this into account, the question is whether the regulation of quality criteria is being properly introduced in the contracts or not. One of the most important aspects at this respect is the road safety. On the one hand, concessionaires are able to manage this aspect up to a point. On the other hand, from an strict economic point of view, they have little incentive to improve it, despite the high social costs of accidents. This thesis has analyzed the suitability of indicators and incentives usually introduced in road concession contracts, finding high heterogeneity, and even technical inaccuracies on their formulation. It has also been found the lack of connection between these incentives and the costs of measures to improve road safety, therefore they are not expected to fulfil their purpose. In order to overcome this situation, this thesis firstly analyzes in depth the issues involved in the development of road safety indicators and incentives. This analysis yields the equation which links the social benefit derived from the level of road safety and the cost to achieve it. In its turn, through this equation it is possible to meet the optimal road safety level from the socio‐economic point of view. Secondly, this thesis extrapolates microeconomic methods to the field of highway concessions, with the aim of determining the formulation of the optimal road safety incentive. Furthermore, the thesis takes into account the experience in the practical application of incentives on existing concessions, performing a proposal to settle the disputes between concessionaires and the Public Administrations. Finally, the thesis simulates the implementation of the proposed indicator and incentive to real concessions with the aim of verifying the economic feasibility of their application and confirming how they match the socio‐economic optimum. As a result, this thesis proposes an indicator and incentive that induce companies to drive the management of the concession towards achieving the optimal road safety level, all within a framework of the budgetary feasibility.
Resumo:
The recent continuous development of Cooperative ITS has resulted in several initiatives which focus on different parts of the Cooperative environment landscape. The FOTsis project focuses on the infrastructure side of the Cooperative environment and will deploy and test 7 services designed to maximise the benefits of the integration of the road operator and infrastructure-based information providers into the ITS environment. This paper describes the current status of the project and focuses on the road safety approach within the project: safety services and safety impact assessment. The outlook on the project's next steps is given in the last section of the paper.
Resumo:
La erosión costera es un fenómeno que ha cobrado importancia durante los últimos años, debido a sus repercusiones tanto en el turismo, como en el incremento de riesgo para las infraestructuras y para la población allí ubicada. Se define como el retroceso progresivo de la línea de costa cuyas causas pueden ser de origen natural o antropogénicas. La costa merece la máxima protección, y su gestión debe asegurar su integridad física y su libre acceso, al igual que un uso público por parte de todos. En este horizonte, la reducción de costes, la facilidad de construcción y velocidad de realización, las obras de geotextil se han mostrado como una alternativa muy seria a las obras duras u obras clásicas, tradicionalmente realizadas a lo largo de las costas. Pero esta alternativa de uso conlleva un mayor conocimiento en el comportamiento de éstas, su diseño y durabilidad. Las obras de geotextil, como su nombre indica, se realizan con elementos tridimensionales de geotextil (cosidos o no cosidos) rellenos de arena. Estos elementos se pueden considerar innovadores, económicos, ecológicos y alternativos frente a los tradicionales. Se distinguen tres tipos denominados: sacos, tubos y contenedores. El principal objetivo de esta tesis se centra en la determinación de las zonas de la costa apropiados para la utilización de estructuras compuestas de elementos de geotextil rellenos de arena, como obras de defensa de costas, con el fin de facilitar su uso en la ingeniería de costas. Para ello se ha clasificado tanto las distintas zonas del perfil longitudinal de una playa, como los tipos de costa en función de la variable altura de ola significante. Se han determinado las limitaciones de esta variable en las distintas fórmulas de estabilidad de estas estructuras. Y finalmente, en función de la máxima limitación de altura de ola significante y de sus posibles valores en las zonas y tipos de costa, se han determinado las zonas más apropiadas para el uso de las estructuras compuestas por elementos de geotextil. Finalmente se han redactado las conclusiones de la investigación y se han propuesto nuevas líneas de investigación relacionadas con esta Tesis Doctoral. Coastal erosion is a phenomenon that has become more important in recent years because of its impact on both on tourism, and increased risk to infrastructure and the population located there. It is defined as the gradual decline in the coastline whose causes may be natural or anthropogenic origin. The coast deserves maximum protection, and management should ensure their physical integrity and their free access, as well as public use by all. In this line, cost reduction, ease of construction and completion rate, geotextile works have been shown as a very serious to hard works or classics alternative, traditionally performed along the coasts. But this alternative use entails greater insight into the behaviour of these, design and durability. Works of geotextile, as its name suggests, are made with three-dimensional elements of geotextile (sewn or stitched) filled with sand. These items can be considered innovative, economic, and ecological alternative compared to traditional. Bags, tubes and containers, three known types are distinguished. The main objective of this thesis focuses on determining the appropriate areas of the coast for the use of composite structures of elements filled geotextile sand as coastal defence works, in order to facilitate their use, in coastal engineering. For it, has been classified by both the different areas of the longitudinal profile of a beach as the shoreline types depending on the variable significant wave height. We have determined the limitations of this variable in the different formulas stability of these structures. And finally, depending on the maximum limitation of significant wave height and its possible values in the areas and types of coastline, have determined the most appropriate for use in structures composed of elements of geotextile areas. Finally, the conclusions of the research have been addressed and the proposal of new lines of work related to the topic has been made.
Resumo:
Esta investigación surge a raíz de la experiencia profesional del autor, maestro especialista de Educación Física en el C.E.I.P. “Alhambra” de Madrid, cuando de manera progresiva, aprecia que el tenis de mesa puede ser un deporte muy interesante de desarrollar en las sesiones de Educación Física y de promover dentro de los tiempos de recreo. El autor cree que este deporte desarrolla una serie de objetivos motrices, afectivos, cognitivos y sociales que pueden contribuir a la adquisición de las competencias básicas y al desarrollo integral de los alumnos. Es entonces cuando recibe formación sobre el deporte de tenis de mesa y busca los medios necesarios de financiación para que se dote al centro del material necesario. Así la Junta municipal del distrito de Fuencarral-El Pardo instala en el patio del colegio tres mesas de exterior y, con los recursos del colegio y la ayuda de la Asociación de padres y madres (AMPA), se consiguen cinco mesas de interior plegables y todo el material necesario (redes, raquetas, pelotas, etc.). Tras introducir este deporte desde 3º a 6º de Educación Primaria promueve un campeonato en el colegio cuyo índice de participación ronda el 90% del alumnado, estos resultados crean al autor ciertas incertidumbres que son la motivación y punto de partida para realizar esta investigación que analice si la práctica del tenis de mesa puede resultar idónea en la etapa de Educación Primaria. Introducción La legislación actual en materia de educación, Ley Orgánica 2/2006, de 3 de mayo, de Educación (LOE) modificada por la Ley Orgánica 8/2013, de 9 de diciembre, para la mejora de la calidad educativa. (LOMCE), otorga una gran relevancia al deporte en general. "El deporte es una actividad saludable, divertida y formativa que puede tener profundos beneficios no sólo para su salud y su bienestar sino también para el desarrollo personal integral físico, psicológico y psicosocial del niño, además de sobre su desarrollo deportivo" (Pradas, 2009, p. 151), es pues, un momento idóneo para analizar qué deportes se practican en los colegios o por qué se practican unos más que otros. "El tenis de mesa además de ser un deporte para todos, se presenta como un juego atractivo, en donde su práctica resulta muy divertida a cualquier edad, tanto para niños como para adultos, principalmente porque presenta unas reglas de juego simples, no encerrando peligro alguno para la integridad física de sus practicantes durante su juego" (Pradas, 2009, p. 83). Es un deporte que "está abierto a todos, sin distinción de edad o sexo, tanto como deporte de alto nivel como de práctica familiar o social" (Gatien, 1993, p. 16). No obstante, "son escasas las obras sobre tenis de mesa. Pocos libros, tanto de divulgación como de reflexión sobre el tenis de mesa, adornan los estantes de las librerías y las bibliotecas" (Erb, 1999, p.14) y añade “así pues, el medio escolar padece de falta de obras explicativas y pedagógicas referidas a este tema" (Erb, 1999, p.14 ) En particular, se pretenden conseguir cinco objetivos divididos en tres categorías (el centro, el profesorado y el deporte. • A nivel de Centro: - Conocer el porcentaje de colegios que disponen de espacios y materiales adecuados para la práctica del tenis de mesa, así como identificar, de las distintas Direcciones de Área Territoriales (DAT), cuál tiene los colegios mejor dotados tanto en instalaciones como en materiales para desarrollar programas de promoción del tenis de mesa. - Averiguar las posibles causas por las que el tenis de mesa no se practica tanto como otros deportes, analizando los impedimentos que limitan la implantación del tenis de mesa como un deporte habitual en los centros de Educación Primaria. Analizar la opinión del profesorado en cuanto a los materiales y las instalaciones necesarios para el tenis de mesa. • A nivel de profesorado: - Analizar el nivel de conocimiento que tienen los profesionales que imparten la asignatura de Educación Física sobre el tenis de mesa, así como sus necesidades para incluir unidades didácticas de tenis de mesa en sus programaciones didácticas. - Conocer el perfil de profesor ideal que recomienda la utilización del tenis de mesa y averiguar el interés del profesorado por recibir formación específica del tenis de mesa. • A nivel de deporte: - Analizar la opinión de los profesionales sobre la idoneidad del tenis de mesa en la Educación Primaria atendiendo a los objetivos que persigue, a las competencias que desarrolla, a los contenidos, criterios de evaluación y estándares de aprendizaje que se pueden trabajar y a las lesiones que se producen. Metodología La investigación se caracterizó por utilizar una metodología inductiva, al surgir de la experiencia profesional del autor, también fue transversal al analizar la realidad en un momento concreto y de tipo cuantitativa. La población objeto de estudio fue la totalidad de los colegios públicos de la Comunidad de Madrid, siendo los profesores de Educación Física los encargados de facilitar los datos solicitados. Estos datos se obtuvieron utilizando como instrumento de toma de datos el cuestionario auto administrado con preguntas cerradas de opción múltiple previamente validado por un panel de 5 expertos. Las variables indirectas fueron: el género del profesorado, la edad del profesorado, la experiencia profesional y el tipo de destino. El proceso de la toma de datos supuso un lapso de tiempo de 3 meses, desde mayo de 2015 hasta julio de 2015, en este tiempo hubo dos fases de recogida de datos, una online a través del correo electrónico institucional de los colegios públicos de la Comunidad de Madrid y otra “in situ” con cuestionarios de lápiz y papel. En cuanto a los datos que se obtuvieron, sobre una población de 798 colegios, se consiguió una muestra de 276, esto supuso una tasa de respuesta del 34,59%, asumiendo la situación más desfavorable posible (p=q) y un nivel de confianza del 95%, para el total de los 276 cuestionarios cumplimentados, el error máximo fue del ±4,78%. Resultados En cuanto a los resultados obtenidos, se establecieron de acuerdo a tres dimensiones: A nivel de Centro, a nivel de Profesorado y a nivel del Deporte y pretendieron averiguar si se alcanzaron los cinco objetivos planteados. Tras el análisis de los resultados, se apreció que los colegios públicos de la Comunidad de Madrid disponían de las suficientes instalaciones para el tenis de mesa, en cambio, faltaban materiales específicos y formación por parte del profesorado, así como recursos didácticos y un programa de promoción del tenis de mesa. Se apreció un manifiesto interés por parte del profesorado en recibir formación específica de tenis de mesa pues la mayoría recomendaba la utilización del tenis de mesa dentro de la asignatura de Educación Física en Educación Primaria. Por último, los resultados mostraron la cantidad de objetivos motrices, afectivos, cognitivos y sociales que desarrolla el tenis de mesa así como su contribución a la adquisición de las competencias básicas y al objetivo “k” de la Educación Primaria, que indica “Valorar la higiene y la salud, conocer y respetar el cuerpo humano, y utilizar la Educación Física y el deporte como medios para favorecer el desarrollo personal y social”, además, se mostró el bajo índice de lesiones que provoca. Discusión y conclusiones El tenis de mesa es un deporte idóneo para ser practicado y enseñado en la asignatura de Educación Física en la etapa de Educación Primaria debido a la gran cantidad de contenidos que son susceptibles de ser trabajados a través de este deporte y debido a la gran cantidad de valores, individuales y sociales que se pueden fomentar con la práctica del tenis de mesa. Las causas de que hasta ahora, el tenis de mesa no sea un deporte practicado de forma habitual en los colegios públicos de la Comunidad de Madrid a pesar de trabajar muchos contenidos específicos de la asignatura de Educación Física puede deberse a factores externos al deporte del tenis de mesa y susceptibles de ser solucionados con una adecuada inversión en materiales específicos, formación del profesorado y recursos didácticos. Si se dota a los centros de los materiales y recursos didácticos necesarios y dando formación al profesorado, éste introduciría unidades didácticas de tenis de mesa dentro de sus programaciones anuales. La federación española y madrileña de tenis de mesa, deberían desarrollar un programa de promoción dotando de materiales y recursos a los centros, tal y como lo han hecho otras federaciones como la de voleibol, bádminton o de baloncesto, entre otras. ABSTRACT This research arises from the professional experience of the author, specialized teacher of physical education in the CEIP "Alhambra" in Madrid, where progressively, appreciates that table tennis can be a very interesting sport to develop in physical education sessions and promote within the playtimes. The author believes that this sport develops a range of motor, affective, cognitive and social objectives that can contribute to the acquisition of basic skills and the integral development of students. It is then when receives training on the sport of table tennis and seeks ways of funding in order to outfit the center with necessary equipment. The Municipal District of Fuencarral-El Pardo installed three outdoor tables in the schoolyard and with the resources of the school and the support of the Association of Parents (AMPA), five indoor folding tables are achieved as well as all the necessary material (nets, rackets, balls, etc.). After introduce the sport from 3rd to 6th grade of primary education, promotes a championship in the school where the participation rate is around 90% of students, these results create the uncertainties to the author that are the motivation and starting point for this research to analyze whether the practice of table tennis can be ideal at the stage of primary education. Introduction The current legislation on education, Organic Law 2/2006 of 3 May, on Education (LOE) as amended by Organic Law 8/2013, of December 9, to improve educational quality (LOMCE), attaches great importance to the sport in general, "Sport is a healthy, funny and educational activity that can have great benefits not only for their health and well-being but also for the physical, psychological and psychosocial comprehensive personal child development besides on their sports development "(Pradas, 2009, p. 151), is therefore an ideal moment to analyze which sports are practiced in schools or why are practiced some more than others. "The table tennis as well as being a sport for everyone, is presented as an attractive game, where its practice is funny at any age, both children and adults, mainly because it has simple game rules, not enclosing danger for the physical integrity of its practitioners during their game" (Pradas, 2009, p. 83). It is a sport that is "open to all, regardless of age or sex, as high-level sport, as family or social practice" (Gatien, 1993, p. 16). However, "there are few books on table tennis. Few books, both reflexion or popularization about table tennis, adorn the shelves of bookstores and libraries." (Erb, 1999, p.14) and add "So, the school environment suffers from lack of explanatory and educational work related to this issue." (Erb, 1999, p.14) In particular, it is intended to achieve the following objectives within the Community of Madrid: • To determine the percentage of schools that have spaces and materials suitable for practicing table tennis and identify, from the different Directorates of Land Area (DAT), which has the best equipped schools in both facilities and materials to develop programs to promote table tennis. • Find out the possible causes that explained why table tennis is not practiced as much as other sports, analyzing impediments that limit the implementation of table tennis as a regular sport in primary schools. Analyze the opinion of teachers in terms of materials and facilities needed for table tennis. • Analyze the level of knowledge about table tennis among professionals who teach the subject of Physical Education and their needs to include teaching units about table tennis in their teaching programs. • Knowing the profile of the ideal teacher who recommends the use of table tennis and figure out the interest of teachers to receive specific training of table tennis. • Analyze the professional opinion on the suitability of table tennis in Primary Education taking into account the objectives pursued, to develop the skills, content, evaluation criteria and learning standards that can work and injuries involved. Methodology The investigation was characterized by using an inductive methodology, arising from the professional experience of the author, was also transverse to analyze reality in a particular time and quantitative type. The population under study were all the state schools in Madrid region, being the physical education teachers responsible for providing the requested data. These data were obtained using as data collection instrument a self-administered questionnaire with multiple choice questions, because it facilitates the analysis thereof. In terms of obtained data, on a population of 798 schools, a sample of 276 was achieved, this represented a response rate of 34.59%, assuming the worst case scenario (p = q) and a level 95% confidence for the total of the 276 completed questionnaires, the maximum error was ± 4.78%. Results In terms of the results, they were set according to three dimensions: center level, professorate level and Sport level and trying to find out whether the five objectives were achieved. After analyzing the results, it was found that schools possessed sufficient facilities for table tennis, however, lacked specific materials and training by teachers, as well as teaching resources and a program to promote table tennis. A clear interest was noticed by teachers in order to receive specific training in table tennis since most recommended the use of table tennis in the subject of physical education in primary education. Finally, the results proved the number of motor, affective, cognitive and social objectives developed by table tennis and its contribution to the acquisition of basic skills and the objective "k" of primary education, in addition to the low rate of injury it causes. Discussion and conclusions Table tennis is an ideal sport to be practiced and taught in the subject of Physical Education in Primary Education due to the large amount of content that are likely to be worked through this sport and due to the large number of individual and social values that can foster the practice of table tennis. The causes of that so far, table tennis is not a sport practiced regularly in schools despite working many specific contents of the subject of Physical Education may be due to factors outside the sport of table tennis and subject to solved with adequate investment in specific materials, teacher training and educational resources. By endowing the centers with the necessary teaching materials and resources and providing training to teachers, they would introduce teaching units of table tennis within their annual programs. Madrid and the Spanish Federation of table tennis should develop a promotional program by endowing materials and resources to the centers, as did other federations such as badminton and basketball, among others.
Resumo:
Bakers are repeatedly exposed to wheat flour (WF) and may develop sensitization and occupational rhinoconjunctivitis and/or asthma to WF allergens.1 Several wheat proteins have been identified as causative allergens of occupational respiratory allergy in bakery workers.1 Testing of IgE reactivity in patients with different clinical profiles of wheat allergy (food allergy, wheat-dependent exercise-induced anaphylaxis, and baker's asthma) to salt-soluble and salt-insoluble protein fractions from WF revealed a high degree of heterogeneity in the recognized allergens. However, mainly salt-soluble proteins (albumins, globulins) seem to be associated with baker's asthma, and prolamins (gliadins, glutenins) with wheat-dependent exercise-induced anaphylaxis, whereas both protein fractions reacted to IgE from food-allergic patients.1 Notwithstanding, gliadins have also been incriminated as causative allergens in baker's asthma.2 We report on a 31-year-old woman who had been exposed to WF practically since birth because her family owned a bakery housed in the same home where they lived. She moved from this house when she was 25 years, but she continued working every day in the family bakery. In the last 8 years she had suffered from work-related nasal and ocular symptoms such as itching, watery eyes, sneezing, nasal stuffiness, and rhinorrhea. These symptoms markedly improved when away from work and worsened at work. In the last 5 years, she had also experienced dysphagia with frequent choking, especially when ingesting meats or cephalopods, which had partially improved with omeprazole therapy. Two years before referral to our clinic, she began to have dry cough and breathlessness, which she also attributed to her work environment. Upper and lower respiratory tract symptoms increased when sifting the WF and making the dough. The patient did not experience gastrointestinal symptoms with ingestion of cereal products. Skin prick test results were positive to grass (mean wheal, 6 mm), cypress (5 mm) and Russian thistle pollen (4 mm), WF (4 mm), and peach lipid transfer protein (6 mm) and were negative to rice flour, corn flour, profilin, mites, molds, and animal dander. Skin prick test with a homemade WF extract (10% wt/vol) was strongly positive (15 mm). Serologic tests yielded the following results: eosinophil cationic protein, 47 ?g/L; total serum IgE, 74 kU/L; specific IgE (ImmunoCAP; ThermoFisher, Uppsala, Sweden) to WF, 7.4 kU/L; barley flour, 1.24 kU/L; and corn, gluten, alpha-amylase, peach, and apple, less than 0.35 kU/L. Specific IgE binding to microarrayed purified WF allergens (WDAI-0.19, WDAI-0.53, WTAI-CM1, WTAI-CM2, WTAI-CM3, WTAI-CM16, WTAI-CM17, Tri a 14, profilin, ?-5-gliadin, Tri a Bd 36 and Tri a TLP, and gliadin and glutamine fractions) was assessed as described elsewhere.3 The patient's serum specifically recognized ?-5-gliadin and the gliadin fraction, and no IgE reactivity was observed to other wheat allergens. Spirometry revealed a forced vital capacity of 3.88 L (88%), an FEV1 of 3.04 L (87%), and FEV1/forced vital capacity of 83%. A methacholine inhalation test was performed following an abbreviated protocol,4 and the results were expressed as PD20 in cumulative dose (mg) of methacholine. Methacholine inhalation challenge test result was positive (0.24 mg cumulative dose) when she was working, and after a 3-month period away from work and with no visits to the bakery house, it gave a negative result. A chest x-ray was normal. Specific inhalation challenge test was carried out in the hospital laboratory by tipping WF from one tray to another for 15 minutes. Spirometry was performed at baseline and at 2, 5, 10, 15, 20, 30, 45, and 60 minutes after the challenge with WF. Peak expiratory flow was measured at baseline and then hourly over 24 hours (respecting sleeping time). A 12% fall in FEV1 was observed at 20 minutes and a 26% drop in peak expiratory flow at 9 hours after exposure to WF,
Resumo:
Nossa dissertação tem como objetivo estudar a Educação e a Segurança do Trabalho em Eletricidade frente à Norma Regulamentadora NR-10 (Segurança em Instalações e Serviços em Eletricidade). Segundo os aspectos aparentes da própria NR-10 em seus noventa e nove (99) itens e nos dois anexos de treinamento: curso básico (NR-10) e complementar (Sistema Elétrico de Potência SEP), sua finalidade consiste na garantia da segurança do trabalho em eletricidade, todavia, a partir de nossa análise (da NR-10) e de nossa experiência no trabalho em eletricidade surgiu à demanda representada na hipótese de que: os trabalhadores em eletricidade percebem que as medidas preconizadas na NR-10 e em seus treinamentos não correspondem integralmente as suas necessidades. Nossa estratégia é testar a NR-10 ao examinarmos: a) sua formatação e aplicação baseada do modelo tripartite; b) seus conceitos de segurança do trabalho; c) as consolidações de seus artigos jurídicos; d) as programações, carga horária, as estratégias didáticas e educacionais de seus treinamentos. Isto é, examinaremos a NR-10 frente aos conteúdos dos processos de Educação, Luta por Saúde e Condições de Vida da Classe Trabalhadora, excepcionalmente do trabalhador em eletricidade.(AU)
Resumo:
Nossa dissertação tem como objetivo estudar a Educação e a Segurança do Trabalho em Eletricidade frente à Norma Regulamentadora NR-10 (Segurança em Instalações e Serviços em Eletricidade). Segundo os aspectos aparentes da própria NR-10 em seus noventa e nove (99) itens e nos dois anexos de treinamento: curso básico (NR-10) e complementar (Sistema Elétrico de Potência SEP), sua finalidade consiste na garantia da segurança do trabalho em eletricidade, todavia, a partir de nossa análise (da NR-10) e de nossa experiência no trabalho em eletricidade surgiu à demanda representada na hipótese de que: os trabalhadores em eletricidade percebem que as medidas preconizadas na NR-10 e em seus treinamentos não correspondem integralmente as suas necessidades. Nossa estratégia é testar a NR-10 ao examinarmos: a) sua formatação e aplicação baseada do modelo tripartite; b) seus conceitos de segurança do trabalho; c) as consolidações de seus artigos jurídicos; d) as programações, carga horária, as estratégias didáticas e educacionais de seus treinamentos. Isto é, examinaremos a NR-10 frente aos conteúdos dos processos de Educação, Luta por Saúde e Condições de Vida da Classe Trabalhadora, excepcionalmente do trabalhador em eletricidade.(AU)
Resumo:
The success of highly active anti-retroviral therapy (HAART) has inspired new concepts for eliminating HIV from infected individuals. A major obstacle is the persistence of long-lived reservoirs of latently infected cells that might become activated at some time after cessation of therapy. We propose that, in the context of treatment strategies to deliberately activate and eliminate these reservoirs, hybrid toxins targeted to kill HIV-infected cells be reconsidered in combination with HAART. Such combinations might also prove valuable in protocols aimed at preventing mother-to-child transmission and establishment of infection immediately after exposure to HIV. We suggest experimental approaches in vitro and in animal models to test various issues related to safety and efficacy of this concept.
Resumo:
Development of transparent oxide semiconductors (TOS) from Earth-abundant materials is of great interest for cost-effective thin film device applications, such as solar cells, light emitting diodes (LEDs), touch-sensitive displays, electronic paper, and transparent thin film transistors. The need of inexpensive or high performance electrode might be even greater for organic photovoltaic (OPV), with the goal to harvest renewable energy with inexpensive, lightweight, and cost competitive materials. The natural abundance of zinc and the wide bandgap ($sim$3.3 eV) of its oxide make it an ideal candidate. In this dissertation, I have introduced various concepts on the modulations of various surface, interface and bulk opto-electronic properties of ZnO based semiconductor for charge transport, charge selectivity and optimal device performance. I have categorized transparent semiconductors into two sub groups depending upon their role in a device. Electrodes, usually 200 to 500 nm thick, optimized for good transparency and transporting the charges to the external circuit. Here, the electrical conductivity in parallel direction to thin film, i.e bulk conductivity is important. And contacts, usually 5 to 50 nm thick, are optimized in case of solar cells for providing charge selectivity and asymmetry to manipulate the built in field inside the device for charge separation and collection. Whereas in Organic LEDs (OLEDs), contacts provide optimum energy level alignment at organic oxide interface for improved charge injections. For an optimal solar cell performance, transparent electrodes are designed with maximum transparency in the region of interest to maximize the light to pass through to the absorber layer for photo-generation, plus they are designed for minimum sheet resistance for efficient charge collection and transport. As such there is need for material with high conductivity and transparency. Doping ZnO with some common elements such as B, Al, Ga, In, Ge, Si, and F result in n-type doping with increase in carriers resulting in high conductivity electrode, with better or comparable opto-electronic properties compared to current industry-standard indium tin oxide (ITO). Furthermore, improvement in mobility due to improvement on crystallographic structure also provide alternative path for high conductivity ZnO TCOs. Implementing these two aspects, various studies were done on gallium doped zinc oxide (GZO) transparent electrode, a very promising indium free electrode. The dynamics of the superimposed RF and DC power sputtering was utilized to improve the microstructure during the thin films growth, resulting in GZO electrode with conductivity greater than 4000 S/cm and transparency greater than 90 %. Similarly, various studies on research and development of Indium Zinc Tin Oxide and Indium Zinc Oxide thin films which can be applied to flexible substrates for next generation solar cells application is presented. In these new TCO systems, understanding the role of crystallographic structure ranging from poly-crystalline to amorphous phase and the influence on the charge transport and optical transparency as well as important surface passivation and surface charge transport properties. Implementation of these electrode based on ZnO on opto-electronics devices such as OLED and OPV is complicated due to chemical interaction over time with the organic layer or with ambient. The problem of inefficient charge collection/injection due to poor understanding of interface and/or bulk property of oxide electrode exists at several oxide-organic interfaces. The surface conductivity, the work function, the formation of dipoles and the band-bending at the interfacial sites can positively or negatively impact the device performance. Detailed characterization of the surface composition both before and after various chemicals treatment of various oxide electrode can therefore provide insight into optimization of device performance. Some of the work related to controlling the interfacial chemistry associated with charge transport of transparent electrodes are discussed. Thus, the role of various pre-treatment on poly-crystalline GZO electrode and amorphous indium zinc oxide (IZO) electrode is compared and contrasted. From the study, we have found that removal of defects and self passivating defects caused by accumulation of hydroxides in the surface of both poly-crystalline GZO and amorphous IZO, are critical for improving the surface conductivity and charge transport. Further insight on how these insulating and self-passivating defects cause charge accumulation and recombination in an device is discussed. With recent rapid development of bulk-heterojunction organic photovoltaics active materials, devices employing ZnO and ZnO based electrode provide air stable and cost-competitive alternatives to traditional inorganic photovoltaics. The organic light emitting diodes (OLEDs) have already been commercialized, thus to follow in the footsteps of this technology, OPV devices need further improvement in power conversion efficiency and stable materials resulting in long device lifetimes. Use of low work function metals such as Ca/Al in standard geometry do provide good electrode for electron collection, but serious problems using low work-function metal electrodes originates from the formation of non-conductive metal oxide due to oxidation resulting in rapid device failure. Hence, using low work-function, air stable, conductive metal oxides such as ZnO as electrons collecting electrode and high work-function, air stable metals such as silver for harvesting holes, has been on the rise. Devices with degenerately doped ZnO functioning as transparent conductive electrode, or as charge selective layer in a polymer/fullerene based heterojunction, present useful device structures for investigating the functional mechanisms within OPV devices and a possible pathway towards improved air-stable high efficiency devices. Furthermore, analysis of the physical properties of the ZnO layers with varying thickness, crystallographic structure, surface chemistry and grain size deposited via various techniques such as atomic layer deposition, sputtering and solution-processed ZnO with their respective OPV device performance is discussed. We find similarity and differences in electrode property for good charge injection in OLEDs and good charge collection in OPV devices very insightful in understanding physics behind device failures and successes. In general, self-passivating surface of amorphous TCOs IZO, ZTO and IZTO forms insulating layer that hinders the charge collection. Similarly, we find modulation of the carrier concentration and the mobility in electron transport layer, namely zinc oxide thin films, very important for optimizing device performance.
Resumo:
This project attempts to answer the question "What holds the construction of money together?" by asserting that it is money's religious nature which provides the moral compulsion for people to use, and continue to uphold, money as a socially constructed concept. This project is primarily descriptive and focuses on the religious nature of money by employing a sociological theory of religion in viewing money as a technical concept. This is an interdisciplinary work between religious studies, economics, and sociology and draws heavily from Emile Durkheim's 'The Elementary Forms of Religious Life' as well as work related to heterodox theories of money developed by Geoffrey Ingham, A. Mitchell Innes, and David Graeber. Two new concepts are developed: the idea of monetary sacrality and monetary effervescence, both of which serve to recharge the religious saliency of money. By developing the concept of monetary sacrality, this project shows how money acts to interpret our economic relations while also obfuscating complex power dynamics in society, making them seem naturally occurring and unchangeable. The project also shows how our contemporary fractional reserve banking system contributes to money's collective effervescence and serves to animate economic acting within a monetary network. The project concludes by outlining multiple implications for religious studies, economics, sociology, and central banking.
Resumo:
Objetivos: Analizar las desigualdades de género en las condiciones de empleo, trabajo, conciliación de la vida laboral y familiar, y en los problemas de salud relacionados con el trabajo en una muestra de la población ocupada en España en el año 2007 teniendo en cuenta la clase social y el sector de actividad. Métodos: Las desigualdades de género se analizaron mediante 25 indicadores en los 11.054 trabajadores entrevistados en la VI Encuesta Nacional de Condiciones de Trabajo. Se calcularon las odds ratio (OR) y sus intervalos de confianza del 95% (IC95%) mediante modelos de regresión logística multivariados, estratificando por clase social ocupacional y sector de actividad. Resultados: Más mujeres que hombres trabajaban sin contrato (OR = 1,83; IC95%: 1,51-2,21), con alto esfuerzo o baja recompensa (1,14:1,05-1,25) y sufriendo acoso sexual (2,85:1,75-4,62), discriminación (1,60:1,26-2,03) y más dolores osteomusculares (1,38:1,19-1,59). Más hombres que mujeres trabajaban a turnos (0,86:0,79-0,94), con altos niveles de ruido (0,34:0,30-0,40), altas exigencias físicas (0,58:0,54-0,63) y sufriendo más lesiones por accidentes de trabajo (0,67:0,59-0,76). Las trabajadoras no manuales mostraron trabajar con un contrato temporal (1,34:1,09-1,63), expuestas a más riesgos psicosociales y sufriendo mayor discriminación (2,47:1,49-4,09) y enfermedades profesionales (1,91:1,28-2,83). En el sector de la industria las desigualdades de género fueron más marcadas. Conclusiones: En España existen importantes desigualdades de género en las condiciones de empleo, trabajo y en los problemas de salud relacionados con el trabajo, que se ven influenciadas por la clase social y el sector de actividad, y que sería necesario tener en consideración en las políticas públicas de salud laboral.
Resumo:
Migrant workers usually show higher rates of work-related health problems than natives. However, little information is available about their exposure to occupational risks. We describe self-reported working exposure in Spanish and foreign-born workers. A cross-sectional survey was conducted as part of the ITSAL Project. Data on sociodemographic and self-reported occupational exposure in 1,841 foreign-born and 509 Spanish workers were collected through face-to-face interviews. Prevalence and adjusted odds ratios-aOR- (by age, education, type of contract) were calculated. Foreign-born men in non-services sectors and those in manual occupations perceived exposure to occupational risks with lower prevalence than Spanish workers. Foreign-born women reported higher prevalence of exposure than Spanish female workers. By occupation, foreign-born female workers were more likely than Spanish workers to report working many hours/day (aOR2.68; 95 % CI 1.06–6.78) and exposure to extreme temperatures (aOR2.19; 95 % CI 1.10–4.38). Some groups of migrant workers may need increased protection regarding some occupational exposures.
Resumo:
En este artículo se analiza la presencia de mobbing en el profesorado universitario como parte de un estudio trasversal más amplio sobre su calidad de vida, trabajo y salud. Los objetivos del estudio son tres: 1) conocer la frecuencia del mobbing en un contexto universitario, 2) examinar la asociación existente entre mobbing y la edad, el género y la categoría académica de los profesores, y 3) estudiar los mejores predictores del mobbing. Respondieron el cuestionario 252 profesores a tiempo completo, lo que ha significado una tasa de respuesta del 61,6%. Nuestros resultados muestran que casi el veintitrés por ciento (22,6%) de los profesores se sintieron víctimas de mobbing. No hemos encontrado diferencias estadísticamente significativas en mobbing debidas a la edad, género o categoría académica de los profesores. Según diversos análisis de regresión logística jerárquica por bloques que hemos realizado, los mejores predictores del mobbing han resultado ser: el grado de autonomía en el trabajo y la satisfacción experimentada en las relaciones con los supervisores. Estas 2 variables han explicado, en nuestro estudio, casi un 37% de la variabilidad del mobbing. Serían necesarios estudios longitudinales o experimentales para poder establecer relaciones de causalidad entre mobbing y contexto laboral.