Market-driven security-constrained transmission network expansion planning

This paper presents a Bi-level Programming (BP) approach to solve the Transmission Network Expansion Planning (TNEP) problem. The proposed model is envisaged under a market environment and considers security constraints. The upper-level of the BP problem corresponds to the transmission planner which procures the minimization of the total investment and load shedding cost. This upper-level problem is constrained by a single lower-level optimization problem which models a market clearing mechanism that includes security constraints. Results on the Garver's 6-bus and IEEE 24-bus RTS test systems are presented and discussed. Finally, some conclusions are drawn. © 2011 IEEE.

Comparison of FACTS STATCOM models for damping oscillations in power system due to small perturbations

This paper presents small-signal stability studies of a multimachine power system, considering Static Synchronous Compensators (STATCOM)and discussed control modes of the STATCOM. The Power Sensitivity Model(PSM)is used to represent the electric power system. The study is based on modal analysis and time domain simulations. The results obtained allow concluding that the STATCOM improves the stabilization in the electric power system. © 2011 IEEE.

An application of a modified constructive heuristic algorithm to transmission expansion planning

Transmission expansion planning (TEP) is a non-convex optimization problem that can be solved via different heuristic algorithms. A variety of classical as well as heuristic algorithms in literature are addressed to solve TEP problem. In this paper a modified constructive heuristic algorithm (CHA) is proposed for solving such a crucial problem. Most of research papers handle TEP problem by linearization of the non-linear mathematical model while in this research TEP problem is solved via CHA using non-linear model. The proposed methodology is based upon Garver's algorithm capable of applying to a DC model. Simulation studies and tests results on the well known transmission network such as: Garver and IEEE 24-bus systems are carried out to show the significant performance as well as the effectiveness of the proposed algorithm. © 2011 IEEE.

Interaction between wave and coastal structure: Validation of two lagrangian numerical models with experimental results marine 2011

Numerical modeling of the interaction among waves and coastal structures is a challenge due to the many nonlinear phenomena involved, such as, wave propagation, wave transformation with water depth, interaction among incident and reflected waves, run-up / run-down and wave overtopping. Numerical models based on Lagrangian formulation, like SPH (Smoothed Particle Hydrodynamics), allow simulating complex free surface flows. The validation of these numerical models is essential, but comparing numerical results with experimental data is not an easy task. In the present paper, two SPH numerical models, SPHysics LNEC and SPH UNESP, are validated comparing the numerical results of waves interacting with a vertical breakwater, with data obtained in physical model tests made in one of the LNEC's flume. To achieve this validation, the experimental set-up is determined to be compatible with the Characteristics of the numerical models. Therefore, the flume dimensions are exactly the same for numerical and physical model and incident wave characteristics are identical, which allows determining the accuracy of the numerical models, particularly regarding two complex phenomena: wave-breaking and impact loads on the breakwater. It is shown that partial renormalization, i.e. renormalization applied only for particles near the structure, seems to be a promising compromise and an original method that allows simultaneously propagating waves, without diffusion, and modeling accurately the pressure field near the structure.

A proposal for reliability evaluation of components on electric power distribution system integrating probabilistic models and fuzzy inference systems

The system reliability depends on the reliability of its components itself. Therefore, it is necessary a methodology capable of inferring the state of functionality of these components to establish reliable indices of quality. Allocation models for maintenance and protective devices, among others, have been used in order to improve the quality and availability of services on electric power distribution systems. This paper proposes a methodology for assessing the reliability of distribution system components in an integrated way, using probabilistic models and fuzzy inference systems to infer about the operation probability of each component. © 2012 IEEE.

Model to increase the lateral line length of drip irrigation systems

Non-pressure compensating drip hose is widely used for irrigation of vegetables and orchards. One limitation is that the lateral line length must be short to maintain uniformity due to head loss and slope. Any procedure to increase the length is appropriate because it represents low initial cost of the irrigation system. The hypothesis of this research is that it is possible to increase the lateral line length combining two points: using a larger spacing between emitters at the beginning of the lateral line and a smaller one after a certain distance; and allowing a higher pressure variation along the lateral line under an acceptable value of distribution uniformity. To evaluate this hypothesis, a nonlinear programming model (NLP) was developed. The input data are: diameter, roughness coefficient, pressure variation, emitter operational pressure, relationship between emitter discharge and pressure. The output data are: line length, discharge and length of the each section with different spacing between drippers, total discharge in the lateral line, multiple outlet adjustment coefficient, head losses, localized head loss, pressure variation, number of emitters, spacing between emitters, discharge in each emitter, and discharge per linear meter. The mathematical model developed was compared with the lateral line length obtained with the algebraic solution generated by the Darcy-Weisbach equation. The NLP model showed the best results since it generated the greater gain in the lateral line length, maintaining the uniformity and the flow variation under acceptable standards. It had also the lower flow variation, so its adoption is feasible and recommended.

Sexual transmission of Toxoplasma gondii in sheep

Male sheep of reproductive age were distributed into three groups: GI, a sheep inoculated (oral) with 2.0×105 oocysts of the P strain of Toxoplasma gondii; GII, a sheep infected (subcutaneous) with 1.0×106 tachyzoites of the RH strain of T. gondii; and GIII, a sheep kept as a control (not infected). After the inoculation of the males, 12 breeding ewes, which were not pregnant and which were serologically negative for reproductive diseases (particularly toxoplasmosis), were distributed into three groups, synchronized, and subsequently exposed to natural mating with previously inoculated males. The distribution was as follows: five ewes that underwent natural mating with the GI male, five ewes that were exposed to natural mating with the GII male, and two ewes that were mated with the non-infected male (control). Serum samples of all the ewes were collected on days -30, -14, -7, -1, and 0 (days before natural mating) and on days 1, 3, 5, 7, 11, 14, and weekly until birth; the presence of serum antibodies against T. gondii was assessed by IFAT. Using a bioassay and PCR, T. gondii was isolated from the semen of the infected reproducing sheep before mating. Following natural mating, 5 of the 12 females displayed antibodies specific for T. gondii; of these animals, two of the ewes underwent natural mating with the male inoculated with oocysts (GI) and three with the male infected with tachyzoites (GII). One of the females that displayed antibodies specific to this coccidian and that underwent natural mating with the GII sheep had a macerated fetus on the 70th day following coverage. Using a bioassay after the birth, it was possible to isolate T. gondii from samples of the pool of tissues from the five females that seroconverted after natural mating and from their respective lambs. Using PCR, the DNA of T. gondii was isolated from the pool of tissues from one and two females exposed to natural mating with the reproductive males infected with the oocysts and tachyzoites, respectively. Using this technique, it was also possible to diagnose the presence of the parasite in the pool of tissues from the lambs of one female that underwent natural mating with the male sheep infected with oocysts. These results demonstrated the sexual transmission of T. gondii in the sheep species with consequent vertical transmission to their lambs. © 2013 Elsevier B.V.

Implementation of an AC model for transmission expansion planning considering reliability constraints

In this paper, a hybrid heuristic methodology that employs fuzzy logic for solving the AC transmission network expansion planning (AC-TEP) problem is presented. An enhanced constructive heuristic algorithm aimed at obtaining a significant quality solution for such complicated problems considering contingency is proposed. In order to indicate the severity of the contingency, 2 performance indices, namely the line flow performance index and voltage performance index, are calculated. An interior point method is applied as a nonlinear programming solver to handle such nonconvex optimization problems, while the objective function includes the costs of the new transmission lines as well as the real power losses. The performance of the proposed method is examined by applying it to the well-known Garver system for different cases. The simulation studies and result analysis demonstrate that the proposed method provides a promising way to find an optimal plan. Obtaining the best quality solution shows the capability and the viability of the proposed algorithm in AC-TEP. © Tübi̇tak..

Genetic evaluation using multi-trait and random regression models in Simmental beef cattle

The Brazilian Association of Simmental and Simbrasil Cattle Farmers provided 29,510 records from 10,659 Simmental beef cattle; these were used to estimate (co)variance components and genetic parameters for weights in the growth trajectory, based on multi-trait (MTM) and random regression models (RRM). The (co)variance components and genetic parameters were estimated by restricted maximum likelihood. In the MTM analysis, the likelihood ratio test was used to determine the significance of random effects included in the model and to define the most appropriate model. All random effects were significant and included in the final model. In the RRM analysis, different adjustments of polynomial orders were compared for 5 different criteria to choose the best fit model. An RRM of third order for the direct additive genetic, direct permanent environmental, maternal additive genetic, and maternal permanent environment effects was sufficient to model variance structures in the growth trajectory of the animals. The (co)variance components were generally similar in MTM and RRM. Direct heritabilities of MTM were slightly lower than RRM and varied from 0.04 to 0.42 and 0.16 to 0.45, respectively. Additive direct correlations were mostly positive and of high magnitude, being highest at closest ages. Considering the results and that pre-adjustment of the weights to standard ages is not required, RRM is recommended for genetic evaluation of Simmental beef cattle in Brazil. ©FUNPEC-RP.

Risk/investment-driven transmission expansion planning with multiple scenarios

This study presents a new methodology based on risk/investment to solve transmission network expansion planning (TNEP) problem with multiple future scenarios. Three mathematical models related to TNEP problems considering multiple future generation and load scenarios are also presented. These models will provide planners with a meaningful risk assessment that enable them to determine the necessary funding for transmission lines at a permissible risk level. The results using test and real systems show that the proposed method presents better solutions compared with scenario analysis method. ©The Institution of Engineering and Technology 2013.

Analysis of the lightning attractive radius of power transmission lines through the use of a physically-oriented model

Models of different degrees of complexity are found in the literature for the estimation of lightning striking distances and attractive radius of objects and structures. However, besides the oversimplifications of the physical nature of the lightning discharge on which most of them are based, till recently the tridimensional structure configuration could not be considered. This is an important limitation, as edges and other details of the object affect the electric field and, consequently, the upward leader initiation. Within this context, the Self-consistent leader initiation and propagation model (SLIM) proposed by Becerra and Cooray is state-of-the-art leader inception and propagation leader model based on the physics of leader discharges which enables the tridimensional geometry of the structure to be taken into account. In this paper, the model is used for estimating the striking distance and attractive radius of power transmission lines. The results are compared with those obtained from the electrogeometric and Eriksson's models. © 2003-2012 IEEE.

Modelo matemático de linhas de transmissão, contemplando influências ambientais, para o trecho Guamá-Utinga, localizado em Belém, pertencente à Eletronorte

Teoricamente, a predição de falha em cadeia de isoladores pode ser observada pela verificação do comportamento harmônico da corrente através dos isoladores, chamada de corrente de fuga. Isto porque a capacitância de uma cadeia de isoladores permite a passagem das componentes harmônicas de maior ordem da corrente na linha. No entanto os projetos e planejamento de linhas de transmissão só levam em consideração as dimensões e geometrias da linha; esquecendo ou ignorando os efeitos ambientais em uma linha de transmissão. A omissão de tais efeitos, podem confundir um diagnóstico de falha no sistema de isolação da linha, de forma que foi necessário desenvolver uma metodologia para determinação dos valores dos parâmetros elétricos, resistência elétrica e capacitância em função de variáveis ambientais como: temperatura ambiente, radiação solar, umidade relativa do ar, velocidade do vento e direção do vento, particularmente a determinação do comportamento da capacitância, em função dessas variáveis ambientais se deu de maneira inovadora e experimental, tendo em vista obter um modelo matemático de linha de transmissão mais realista e dinâmico, que possa identificar de maneira precisa os parâmetros elétricos, sob a influência das variáveis ambientais. Nesse trabalho é desenvolvido esse modelo, que, além de ser alimentado com dados elétricos e ambientais reais, é feito o estudo da decomposição harmônica da corrente de fuga; além da comparação com resultados de outros modelos já existentes. São realizadas ainda, simulações de falhas virtuais, que compravam a eficiência e limitações do modelo, além de sugerir uma forma de monitoração em tempo real e a baixos custos.

Aspectos de avaliação de desempenho em redes ponto a ponto e ponto multiponto baseados em modelagem Markoviana e medições

Esta tese apresenta uma metodologia para avaliação de desempenho de redes de acesso banda larga. A avaliação de desempenho de redes é uma forma de identificar e analisar como determinadas características tais como diferentes tipos de tráfego ou formas de utilização, por exemplo, podem influenciar no comportamento da rede em foco, podendo assim prever como tal rede se comportará frente a situações futuras. A metodologia apresentada é composta de duas abordagens: uma abordagem baseada em medições e outra baseada em modelagem via processos Markovianos. As redes analisadas englobam os dois tipos básicos de arquitetura de acesso: redes ADSL2+ (linha digital do assinante assimétrica 2+ – Asymmetric Digital Subscriber Line 2+), as quais são redes cabeadas que utilizam cabos metálicos de pares trançados; redes FBWN (rede sem fio banda larga fixa – Fixed Broadband Wireless Network), as quais são redes sem fio (wireless) baseadas no padrão IEEE 802.16. A abordagem de medições é focada na forma como a rede analisada se comporta frente a três situações: transmissão de um tráfego genérico; impacto de ruídos não-estacionários no sistema; e uso da rede como meio de transmissão de tráfego multimídia em tempo real. A abordagem de modelagem, por sua vez, ´e baseada em prever o comportamento das redes analisadas utilizando uma formulação matemática fundamentada em processos Markovianos. Os resultados apresentados indicam a viabilidade de aplicação desta metodologia como forma de avaliação de desempenho. Os resultados ainda tornam possível a extensão desta metodologia a outros tipos de redes de acesso banda larga, tais como: redes de fibras ópticas, redes de enlaces de microondas, redes VDSL/VDSL2 (linha digital do assinante de alta taxa de dados – Very-high-data-rate DSL), etc.

Green-Markov models - new optimization strategies: a case study for user allocation in co-channel macro/femto networks

ABSTRACT: The femtocell concept aims to combine fixed-line broadband access with mobile telephony using the deployment of low-cost, low-power third and fourth generation base stations in the subscribers' homes. While the self-configuration of femtocells is a plus, it can limit the quality of service (QoS) for the users and reduce the efficiency of the network, based on outdated allocation parameters such as signal power level. To this end, this paper presents a proposal for optimized allocation of users on a co-channel macro-femto network, that enable self-configuration and public access, aiming to maximize the quality of service of applications and using more efficiently the available energy, seeking the concept of Green networking. Thus, when the user needs to connect to make a voice or a data call, the mobile phone has to decide which network to connect, using the information of number of connections, the QoS parameters (packet loss and throughput) and the signal power level of each network. For this purpose, the system is modeled as a Markov Decision Process, which is formulated to obtain an optimal policy that can be applied on the mobile phone. The policy created is flexible, allowing different analyzes, and adaptive to the specific characteristics defined by the telephone company. The results show that compared to traditional QoS approaches, the policy proposed here can improve energy efficiency by up to 10%.

Modelagem numérica de dados MCSEM 3D usando computação paralela

Desenvolvemos a modelagem numérica de dados sintéticos Marine Controlled Source Electromagnetic (MCSEM) usada na exploração de hidrocarbonetos para simples modelos tridimensionais usando computação paralela. Os modelos são constituidos de duas camadas estrati cadas: o mar e o sedimentos encaixantes de um delgado reservatório tridimensional, sobrepostas pelo semi-espaço correspondente ao ar. Neste Trabalho apresentamos uma abordagem tridimensional da técnica dos elementos nitos aplicada ao método MCSEM, usando a formulação da decomposição primária e secundária dos potenciais acoplados magnético e elétrico. Num pós-processamento, os campos eletromagnéticos são calculados a partir dos potenciais espalhados via diferenciação numérica. Exploramos o paralelismo dos dados MCSEM 3D em um levantamento multitransmissor, em que para cada posição do transmissor temos o mesmo processo de cálculos com dados diferentes. Para isso, usamos a biblioteca Message Passing Interface (MPI) e o modelo servidor cliente, onde o processador administrador envia os dados de entradas para os processadores clientes computar a modelagem. Os dados de entrada são formados pelos parâmetros da malha de elementos nitos, dos transmissores e do modelo geoelétrico do reservatório. Esse possui geometria prismática que representa lentes de reservatórios de hidrocarbonetos em águas profundas. Observamos que quando a largura e o comprimento horizontais desses reservatório têm a mesma ordem de grandeza, as resposta in-line são muito semelhantes e conseqüentemente o efeito tridimensional não é detectado. Por sua vez, quando a diferença nos tamanhos da largura e do comprimento do reservatório é signi cativa o efeito 3D é facilmente detectado em medidas in-line na maior dimensão horizontal do reservatório. Para medidas na menor dimensão esse efeito não é detectável, pois, nesse caso o modelo 3D se aproxima de um modelo bidimensional. O paralelismo dos dados é de rápida implementação e processamento. O tempo de execução para a modelagem multitransmissor em ambiente paralelo é equivalente ao tempo de processamento da modelagem para um único transmissor em uma máquina seqüêncial, com o acréscimo do tempo de latência na transmissão de dados entre os nós do cluster, o que justi ca o uso desta metodologia na modelagem e interpretação de dados MCSEM. Devido a reduzida memória (2 Gbytes) em cada processador do cluster do departamento de geofísica da UFPA, apenas modelos muito simples foram executados.