Hydrodynamic and thruster model validation for autonomous underwater vehicles

From Pontryagin’s Maximum Principle to the Duke Kahanamoku Aquatic Complex; we develop the theory and generate implementable time efficient trajectories for a test-bed autonomous underwater vehicle (AUV). This paper is the beginning of the journey from theory to implementation. We begin by considering pure motion trajectories and move into a rectangular trajectory which is a concatenation of pure surge and pure sway. These trajectories are tested using our numerical model and demonstrated by our AUV in the pool. In this paper we demonstrate that the above motions are realizable through our method, and we gain confidence in our numerical model. We conclude that using our current techniques, implementation of time efficient trajectories is likely to succeed.

Towards practical implementation of time optimal trajectories for underwater vehicles

In this paper, we are concerned with the practical implementation of time optimal numerical techniques on underwater vehicles. We briefly introduce the model of underwater vehicle we consider and present the parameters for the test bed ODIN (Omni-Directional Intelligent Navigator). Then we explain the numerical method used to obtain time optimal trajectories with a structure suitable for the implementation. We follow this with a discussion on the modifications to be made considering the characteristics of ODIN. Finally, we illustrate our computations with some experimental results.

Geometry‐specified troposphere decorrelation for subcentimeter real‐time kinematic solutions over long baselines

Real‐time kinematic (RTK) GPS techniques have been extensively developed for applications including surveying, structural monitoring, and machine automation. Limitations of the existing RTK techniques that hinder their applications for geodynamics purposes are twofold: (1) the achievable RTK accuracy is on the level of a few centimeters and the uncertainty of vertical component is 1.5–2 times worse than those of horizontal components and (2) the RTK position uncertainty grows in proportional to the base‐torover distances. The key limiting factor behind the problems is the significant effect of residual tropospheric errors on the positioning solutions, especially on the highly correlated height component. This paper develops the geometry‐specified troposphere decorrelation strategy to achieve the subcentimeter kinematic positioning accuracy in all three components. The key is to set up a relative zenith tropospheric delay (RZTD) parameter to absorb the residual tropospheric effects and to solve the established model as an ill‐posed problem using the regularization method. In order to compute a reasonable regularization parameter to obtain an optimal regularized solution, the covariance matrix of positional parameters estimated without the RZTD parameter, which is characterized by observation geometry, is used to replace the quadratic matrix of their “true” values. As a result, the regularization parameter is adaptively computed with variation of observation geometry. The experiment results show that new method can efficiently alleviate the model’s ill condition and stabilize the solution from a single data epoch. Compared to the results from the conventional least squares method, the new method can improve the longrange RTK solution precision from several centimeters to the subcentimeter in all components. More significantly, the precision of the height component is even higher. Several geosciences applications that require subcentimeter real‐time solutions can largely benefit from the proposed approach, such as monitoring of earthquakes and large dams in real‐time, high‐precision GPS leveling and refinement of the vertical datum. In addition, the high‐resolution RZTD solutions can contribute to effective recovery of tropospheric slant path delays in order to establish a 4‐D troposphere tomography.

A stochastic model for natural feature representation

This paper presents a robust stochastic model for the incorporation of natural features within data fusion algorithms. The representation combines Isomap, a non-linear manifold learning algorithm, with Expectation Maximization, a statistical learning scheme. The representation is computed offline and results in a non-linear, non-Gaussian likelihood model relating visual observations such as color and texture to the underlying visual states. The likelihood model can be used online to instantiate likelihoods corresponding to observed visual features in real-time. The likelihoods are expressed as a Gaussian Mixture Model so as to permit convenient integration within existing nonlinear filtering algorithms. The resulting compactness of the representation is especially suitable to decentralized sensor networks. Real visual data consisting of natural imagery acquired from an Unmanned Aerial Vehicle is used to demonstrate the versatility of the feature representation.

Empirical Bayes method in the study of traffic safety via heterogeneous negative multinomial model

In the study of traffic safety, expected crash frequencies across sites are generally estimated via the negative binomial model, assuming time invariant safety. Since the time invariant safety assumption may be invalid, Hauer (1997) proposed a modified empirical Bayes (EB) method. Despite the modification, no attempts have been made to examine the generalisable form of the marginal distribution resulting from the modified EB framework. Because the hyper-parameters needed to apply the modified EB method are not readily available, an assessment is lacking on how accurately the modified EB method estimates safety in the presence of the time variant safety and regression-to-the-mean (RTM) effects. This study derives the closed form marginal distribution, and reveals that the marginal distribution in the modified EB method is equivalent to the negative multinomial (NM) distribution, which is essentially the same as the likelihood function used in the random effects Poisson model. As a result, this study shows that the gamma posterior distribution from the multivariate Poisson-gamma mixture can be estimated using the NM model or the random effects Poisson model. This study also shows that the estimation errors from the modified EB method are systematically smaller than those from the comparison group method by simultaneously accounting for the RTM and time variant safety effects. Hence, the modified EB method via the NM model is a generalisable method for estimating safety in the presence of the time variant safety and the RTM effects.

Design of a model-generated repository as a service for USDL

SAP and its research partners have been developing a lan- guage for describing details of Services from various view- points called the Unified Service Description Language (USDL). At the time of writing, version 3.0 describes technical implementation aspects of services, as well as stakeholders, pricing, lifecycle, and availability. Work is also underway to address other business and legal aspects of services. This language is designed to be used in service portfolio management, with a repository of service descriptions being available to various stakeholders in an organisation to allow for service prioritisation, development, deployment and lifecycle management. The structure of the USDL metadata is specified using an object-oriented metamodel that conforms to UML, MOF and EMF Ecore. As such it is amenable to code gener-ation for implementations of repositories that store service description instances. Although Web services toolkits can be used to make these programming language objects available as a set of Web services, the practicalities of writing dis- tributed clients against over one hundred class definitions, containing several hundred attributes, will make for very large WSDL interfaces and highly inefficient “chatty” implementations. This paper gives the high-level design for a completely model-generated repository for any version of USDL (or any other data-only metamodel), which uses the Eclipse Modelling Framework’s Java code generation, along with several open source plugins to create a robust, transactional repository running in a Java application with a relational datastore. However, the repository exposes a generated WSDL interface at a coarse granularity, suitable for distributed client code and user-interface creation. It uses heuristics to drive code generation to bridge between the Web service and EMF granularities.

Modelling bus lost time : an additional parameter influencing bus dwell time and station platform capacity at a BRT station platform

The common approach to estimate bus dwell time at a BRT station is to apply the traditional dwell time methodology derived for suburban bus stops. In spite of being sensitive to boarding and alighting passenger numbers and to some extent towards fare collection media, these traditional dwell time models do not account for the platform crowding. Moreover, they fall short in accounting for the effects of passenger/s walking along a relatively longer BRT platform. Using the experience from Brisbane busway (BRT) stations, a new variable, Bus Lost Time (LT), is introduced in traditional dwell time model. The bus lost time variable captures the impact of passenger walking and platform crowding on bus dwell time. These are two characteristics which differentiate a BRT station from a bus stop. This paper reports the development of a methodology to estimate bus lost time experienced by buses at a BRT platform. Results were compared with the Transit Capacity and Quality of Servce Manual (TCQSM) approach of dwell time and station capacity estimation. When the bus lost time was used in dwell time calculations it was found that the BRT station platform capacity reduced by 10.1%.

Maternal administration of erythromycin fails to eradicate intrauterine ureaplasma infection in an ovine model

Erythromycin is the standard antibiotic used for treatment of Ureaplasma species during 3 pregnancy; however, maternally administered erythromycin may be ineffective at eliminating 4 intra-amniotic ureaplasma infections. We asked if erythromycin would eradicate intra-amniotic 5 ureaplasma infections in pregnant sheep. At 50 days of gestation (d, term=150d) pregnant ewes 6 received intra-amniotic injections of erythromycin-sensitive U. parvum serovar 3 (n=16) or 10B 7 medium (n=16). At 100d, amniocentesis was performed; five fetal losses (ureaplasma group: 8 n=4; 10B group: n=1) had occurred by this time. Remaining ewes were allocated into treatment 9 subgroups: medium only (M, n=7); medium and erythromycin (M/E, n=8); ureaplasma only (Up, 10 n=6) or ureaplasma and erythromycin (Up/E, n=6). Erythromycin was administered intra11 muscularly (500 mg), eight-hourly for four days (100d-104d). Amniotic fluid samples were 12 collected at 105d. At 125d preterm fetuses were surgically delivered and specimens were 13 collected for culture and histology. Erythromycin was quantified in amniotic fluid by liquid 14 chromatography-mass spectrometry. Ureaplasmas were isolated from the amniotic fluid, 15 chorioamnion and fetal lung of animals from the Up and Up/E groups, however, the numbers of 16 U. parvum recovered were not different between these groups. Inflammation in the 17 chorioamnion, cord and fetal lung was increased in ureaplasma-exposed animals compared to 18 controls, but was not different between the Up and Up/E groups. Erythromycin was detected in 19 amniotic fluid samples, although concentrations were low (<10-76 ng/mL). This study 20 demonstrates that maternally administered erythromycin does not eradicate chronic, intra- amniotic ureaplasma infections or improve fetal outcomes in an ovine model, potentially due to 22 the poor placental passage of erythromycin.

Development of a software model of a heavy vehicle suspension for research

A Simulink Matlab control system of a heavy vehicle suspension has been developed. The aim of the exercise presented in this paper was to develop a Simulink Matlab control system of a heavy vehicle suspension. The objective facilitated by this outcome was the use of a working model of a heavy vehicle (HV) suspension that could be used for future research. A working computer model is easier and cheaper to re-configure than a HV axle group installed on a truck; it presents less risk should something go wrong and allows more scope for variation and sensitivity analysis before embarking on further "real-world" testing. Empirical data recorded as the input and output signals of a heavy vehicle (HV) suspension were used to develop the parameters for computer simulation of a linear time invariant system described by a second-order differential equation of the form: (i.e. a "2nd-order" system). Using the empirical data as an input to the computer model allowed validation of its output compared with the empirical data. The errors ranged from less than 1% to approximately 3% for any parameter, when comparing like-for-like inputs and outputs. The model is presented along with the results of the validation. This model will be used in future research in the QUT/Main Roads project Heavy vehicle suspensions – testing and analysis, particularly so for a theoretical model of a multi-axle HV suspension with varying values of dynamic load sharing. Allowance will need to be made for the errors noted when using the computer models in this future work.

Mechanical Behavior of Articular Cartilage After Osteochondral Autograft Transfer in an Ovine Model

BACKGROUND: Grafting of autologous hyaline cartilage and bone for articular cartilage repair is a well-accepted technique. Although encouraging midterm clinical results have been reported, no information on the mechanical competence of the transplanted joint surface is available. HYPOTHESIS: The mechanical competence of osteochondral autografts is maintained after transplantation. STUDY DESIGN: Controlled laboratory study. METHODS: Osteochondral defects were filled with autografts (7.45 mm in diameter) in one femoral condyle in 12 mature sheep. The ipsilateral femoral condyle served as the donor site, and the resulting defect (8.3 mm in diameter) was left empty. The repair response was examined after 3 and 6 months with mechanical and histologic assessment and histomorphometric techniques. RESULTS: Good surface congruity and plug placement was achieved. The Young modulus of the grafted cartilage significantly dropped to 57.5% of healthy tissue after 3 months (P < .05) but then recovered to 82.2% after 6 months. The aggregate and dynamic moduli behaved similarly. The graft edges showed fibrillation and, in some cases (4 of 6), hypercellularity and chondrocyte clustering. Subchondral bone sclerosis was observed in 8 of 12 cases, and the amount of mineralized bone in the graft area increased from 40% to 61%. CONCLUSIONS: The mechanical quality of transplanted cartilage varies considerably over a short period of time, potentially reflecting both degenerative and regenerative processes, while histologically signs of both cartilage and bone degeneration occur. CLINICAL RELEVANCE: Both the mechanically degenerative and restorative processes illustrate the complex progression of regeneration after osteochondral transplantation. The histologic evidence raises doubts as to the long-term durability of the osteochondral repair.

CYR61 (CCN1) protein expression during fracture healing in an ovine tibial model and its relation to the mechanical fixation stability

The formation of new blood vessels is a prerequisite for bone healing. CYR61 (CCN1), an extracellular matrix-associated signaling protein, is a potent stimulator of angiogenesis and mesenchymal stem cell expansion and differentiation. A recent study showed that CYR61 is expressed during fracture healing and suggested that CYR61 plays a significant role in cartilage and bone formation. The hypothesis of the present study was that decreased fixation stability, which leads to a delay in healing, would lead to reduced CYR61 protein expression in fracture callus. The aim of the study was to quantitatively analyze CYR61 protein expression, vascularization, and tissue differentiation in the osteotomy gap and relate to the mechanical fixation stability during the course of healing. A mid-shaft osteotomy of the tibia was performed in two groups of sheep and stabilized with either a rigid or semirigid external fixator, each allowing different amounts of interfragmentary movement. The sheep were sacrificed at 2, 3, 6, and 9 weeks postoperatively. The tibiae were tested biomechanically and histological sections from the callus were analyzed immunohistochemically with regard to CYR61 protein expression and vascularization. Expression of CYR61 protein was upregulated at the early phase of fracture healing (2 weeks), decreasing over the healing time. Decreased fixation stability was associated with a reduced upregulation of the CYR61 protein expression and a reduced vascularization at 2 weeks leading to a slower healing. The maximum cartilage callus fraction in both groups was reached at 3 weeks. However, the semirigid fixator group showed a significantly lower CYR61 immunoreactivity in cartilage than the rigid fixator group at this time point. The fraction of cartilage in the semirigid fixator group was not replaced by bone as quickly as in the rigid fixator group leading to an inferior histological and mechanical callus quality at 6 weeks and therefore to a slower healing. The results supply further evidence that CYR61 may serve as an important regulator of bone healing.

GameFlow : a model for evaluating player enjoyment in games

Although player enjoyment is central to computer games, there is currently no accepted model of player enjoyment in games. There are many heuristics in the literature, based on elements such as the game interface, mechanics, gameplay, and narrative. However, there is a need to integrate these heuristics into a validated model that can be used to design, evaluate, and understand enjoyment in games. We have drawn together the various heuristics into a concise model of enjoyment in games that is structured by flow. Flow, a widely accepted model of enjoyment, includes eight elements that, we found, encompass the various heuristics from the literature. Our new model, GameFlow, consists of eight elements -- concentration, challenge, skills, control, clear goals, feedback, immersion, and social interaction. Each element includes a set of criteria for achieving enjoyment in games. An initial investigation and validation of the GameFlow model was carried out by conducting expert reviews of two real-time strategy games, one high-rating and one low-rating, using the GameFlow criteria. The result was a deeper understanding of enjoyment in real-time strategy games and the identification of the strengths and weaknesses of the GameFlow model as an evaluation tool. The GameFlow criteria were able to successfully distinguish between the high-rated and low-rated games and identify why one succeeded and the other failed. We concluded that the GameFlow model can be used in its current form to review games; further work will provide tools for designing and evaluating enjoyment in games.

Fitting airport privatisation to purpose : aligning governance, time and management focus

Where airports were once the sole responsibility of their governments, liberalisation of economies has seen administrative interests in airport spaces divested increasingly towards market led authority. Extant literature suggests that actions in decision spaces can be described under broad idealised forms of governance. However in looking at a sample of 18 different airports it is apparent that these classic models are insufficient to appreciate the contextual complexity of each case. Issues of institutional arrangements, privatisation, and management focus are reviewed against existing governance modes to produce a model for informing privatisation decisions, based on the contextual needs of the individual airport and region. Expanding governance modes to include emergent airport arrangements both contribute to the existing literature, and provides a framework to assist policy makers and those charged with the operation of airports to design effective governance models. In progressing this framework, contributions are made to government decision makers for the development of new, or review of existing strategies for privatisation, while the private sector can identify the intent and expectations of privatisation initiatives to make better informed decisions.

Unpacking Japan's 21st century "National Conversation" : images of the future beyond the iron cage of the "Catch Up" model

How does the image of the future operate upon history, and upon national and individual identities? To what extent are possible futures colonized by the image? What are the un-said futurecratic discourses that underlie the image of the future? Such questions inspired the examination of Japan’s futures images in this thesis. The theoretical point of departure for this examination is Polak’s (1973) seminal research into the theory of the ‘image of the future’ and seven contemporary Japanese texts which offer various alternative images for Japan’s futures, selected as representative of a ‘national conversation’ about the futures of that nation. These seven images of the future are: 1. Report of the Prime Minister’s Commission on Japan’s Goals in the 21st Century—The Frontier Within: Individual Empowerment and Better Governance in the New Millennium, compiled by a committee headed by Japan’s preeminent Jungian psychologist Kawai Hayao (1928-2007); 2. Slow Is Beautiful—a publication by Tsuji Shinichi, in which he re-images Japan as a culture represented by the metaphor of the sloth, concerned with slow and quality-oriented livingry as a preferred image of the future to Japan’s current post-bubble cult of speed and economic efficiency; 3. MuRatopia is an image of the future in the form of a microcosmic prototype community and on-going project based on the historically significant island of Awaji, and established by Japanese economist and futures thinker Yamaguchi Kaoru; 4. F.U.C.K, I Love Japan, by author Tanja Yujiro provides this seven text image of the future line-up with a youth oriented sub-culture perspective on that nation’s futures; 5. IMAGINATION / CREATION—a compilation of round table discussions about Japan’s futures seen from the point of view of Japan’s creative vanguard; 6. Visionary People in a Visionless Country: 21 Earth Connecting Human Stories is a collection of twenty one essays compiled by Denmark born Tokyo resident Peter David Pedersen; and, 7. EXODUS to the Land of Hope, authored by Murakami Ryu, one of Japan’s most prolific and influential writers, this novel suggests a future scenario portraying a massive exodus of Japan’s youth, who, literate with state-of-the-art information and communication technologies (ICTs) move en masse to Japan’s northern island of Hokkaido to launch a cyber-revolution from the peripheries. The thesis employs a Futures Triangle Analysis (FTA) as the macro organizing framework and as such examines both pushes of the present and weights from the past before moving to focus on the pulls to the future represented by the seven texts mentioned above. Inayatullah’s (1999) Causal Layered Analysis (CLA) is the analytical framework used in examining the texts. Poststructuralist concepts derived primarily from the work of Michel Foucault are a particular (but not exclusive) reference point for the analytical approach it encompasses. The research questions which reflect the triangulated analytic matrix are: 1. What are the pushes—in terms of current trends—that are affecting Japan’s futures? 2. What are the historical and cultural weights that influence Japan’s futures? 3. What are the emerging transformative Japanese images of the future discourses, as embodied in actual texts, and what potential do they offer for transformative change in Japan? Research questions one and two are discussed in Chapter five and research question three is discussed in Chapter six. The first two research questions should be considered preliminary. The weights outlined in Chapter five indicate that the forces working against change in Japan are formidable, structurally deep-rooted, wide-spread, and under-recognized as change-adverse. Findings and analyses of the push dimension reveal strong forces towards a potentially very different type of Japan. However it is the seven contemporary Japanese images of the future, from which there is hope for transformative potential, which form the analytical heart of the thesis. In analyzing these texts the thesis establishes the richness of Japan’s images of the future and, as such, demonstrates the robustness of Japan’s stance vis-à-vis the problem of a perceived map-less and model-less future for Japan. Frontier is a useful image of the future, whose hybrid textuality, consisting of government, business, academia, and creative minority perspectives, demonstrates the earnestness of Japan’s leaders in favour of the creation of innovative futures for that nation. Slow is powerful in its aim to reconceptualize Japan’s philosophies of temporality, and build a new kind of nation founded on the principles of a human-oriented and expanded vision of economy based around the core metaphor of slowness culture. However its viability in Japan, with its post-Meiji historical pushes to an increasingly speed-obsessed social construction of reality, could render it impotent. MuRatopia is compelling in its creative hybridity indicative of an advanced IT society, set in a modern day utopian space based upon principles of a high communicative social paradigm, and sustainability. IMAGINATION / CREATION is less the plan than the platform for a new discussion on Japan’s transformation from an econo-centric social framework to a new Creative Age. It accords with emerging discourses from the Creative Industries, which would re-conceive of Japan as a leading maker of meaning, rather than as the so-called guzu, a term referred to in the book meaning ‘laggard’. In total, Love Japan is still the most idiosyncratic of all the images of the future discussed. Its communication style, which appeals to Japan’s youth cohort, establishes it as a potentially formidable change agent in a competitive market of futures images. Visionary People is a compelling image for its revolutionary and subversive stance against Japan’s vision-less political leadership, showing that it is the people, not the futures-making elite or aristocracy who must take the lead and create a new vanguard for the nation. Finally, Murakami’s Exodus cannot be ruled out as a compelling image of the future. Sharing the appeal of Tanja’s Love Japan to an increasingly disenfranchised youth, Exodus portrays a near-term future that is achievable in the here and now, by Japan’s teenagers, using information and communications technologies (ICTs) to subvert leadership, and create utopianist communities based on alternative social principles. The principal contribution from this investigation in terms of theory belongs to that of developing the Japanese image of the future. In this respect, the literature reviews represent a significant compilation, specifically about Japanese futures thinking, the Japanese image of the future, and the Japanese utopia. Though not exhaustive, this compilation will hopefully serve as a useful starting point for future research, not only for the Japanese image of the future, but also for all image of the future research. Many of the sources are in Japanese and their English summations are an added reason to respect this achievement. Secondly, the seven images of the future analysed in Chapter six represent the first time that Japanese image of the future texts have been systematically organized and analysed. Their translation from Japanese to English can be claimed as a significant secondary contribution. What is more, they have been analysed according to current futures methodologies that reveal a layeredness, depth, and overall richness existing in Japanese futures images. Revealing this image-richness has been one of the most significant findings of this investigation, suggesting that there is fertile research to be found from this still under-explored field, whose implications go beyond domestic Japanese concerns, and may offer fertile material for futures thinkers and researchers, Japanologists, social planners, and policy makers.

Network protocols and predictive control strategies for distributed real-time control applications

A trend in design and implementation of modern industrial automation systems is to integrate computing, communication and control into a unified framework at different levels of machine/factory operations and information processing. These distributed control systems are referred to as networked control systems (NCSs). They are composed of sensors, actuators, and controllers interconnected over communication networks. As most of communication networks are not designed for NCS applications, the communication requirements of NCSs may be not satisfied. For example, traditional control systems require the data to be accurate, timely and lossless. However, because of random transmission delays and packet losses, the control performance of a control system may be badly deteriorated, and the control system rendered unstable. The main challenge of NCS design is to both maintain and improve stable control performance of an NCS. To achieve this, communication and control methodologies have to be designed. In recent decades, Ethernet and 802.11 networks have been introduced in control networks and have even replaced traditional fieldbus productions in some real-time control applications, because of their high bandwidth and good interoperability. As Ethernet and 802.11 networks are not designed for distributed control applications, two aspects of NCS research need to be addressed to make these communication networks suitable for control systems in industrial environments. From the perspective of networking, communication protocols need to be designed to satisfy communication requirements for NCSs such as real-time communication and high-precision clock consistency requirements. From the perspective of control, methods to compensate for network-induced delays and packet losses are important for NCS design. To make Ethernet-based and 802.11 networks suitable for distributed control applications, this thesis develops a high-precision relative clock synchronisation protocol and an analytical model for analysing the real-time performance of 802.11 networks, and designs a new predictive compensation method. Firstly, a hybrid NCS simulation environment based on the NS-2 simulator is designed and implemented. Secondly, a high-precision relative clock synchronization protocol is designed and implemented. Thirdly, transmission delays in 802.11 networks for soft-real-time control applications are modeled by use of a Markov chain model in which real-time Quality-of- Service parameters are analysed under a periodic traffic pattern. By using a Markov chain model, we can accurately model the tradeoff between real-time performance and throughput performance. Furthermore, a cross-layer optimisation scheme, featuring application-layer flow rate adaptation, is designed to achieve the tradeoff between certain real-time and throughput performance characteristics in a typical NCS scenario with wireless local area network. Fourthly, as a co-design approach for both a network and a controller, a new predictive compensation method for variable delay and packet loss in NCSs is designed, where simultaneous end-to-end delays and packet losses during packet transmissions from sensors to actuators is tackled. The effectiveness of the proposed predictive compensation approach is demonstrated using our hybrid NCS simulation environment.