Predator-Induced Plasticity in Spotted Salamanders (Ambystoma maculatum)

The ability to respond plastically to the environment has allowed amphibians to evolve adaptive responses to spatial and temporal variation in predation threat. However, animals exposed to predators may also show costs of plasticity or tradeoffs. This study examines predator-induced plasticity in larval development, behavior, and metamorphosis in the spotted salamander, Ambystoma maculatum. Salamanders were raised in two treatments: with predator cues (a fish predator, genus Lepomis, on the other side of a divided tank), or without predator cues. During the larval stage the predator treatment group experienced higher mortality rates than the no-predator treatment group. Behavioral trials revealed that predator treatment animals ate less than those not exposed, and that this feeding response was immediately inducible and had lasting effects. Animals in the predator treatment group had smaller tail areas during the mid-larval period. Feeding and body size effects may have contributed to increased mortality in the predator-treatment animals. The timing of metamorphic onset was not affected by the presence of predators, but predator-treatment salamanders had shorter snout/vent lengths at metamorphosis. The duration of metamorphosis showed a potentially adaptive plastic response to the presence of predator cues: metamorphosis was longest in the no-predator treatment group, reduced in the predator treatment group, and even further reduced for animals exposed to predator cues only during metamorphosis. Overall, we found a mix of potentially adaptive and costly plastic responses in spotted salamanders.

Cardiovascular diseases risk factors during the first year of life

The pattern of change in cardiovascular risk factors, blood pressure (SBP and DBP) and plasma total cholesterol (TC), over time, their tracking and their relation to anthropometric measurements during the first year of life were investigated. Also, the effect of breast feeding on TC and the relationship of blood pressure measurements and family history of CVD risk factors were examined. One hundred five newborn term, healthy infants who were seen at a pediatric clinic in The Woodlands, Texas were followed longitudinally from 2 weeks to 1 year of age. TC, blood pressure, weight and length of the infants were measured at age 2 weeks, and again at 2, 4, 6, 9 and 12 months. In addition, family history, maternal and paternal, of CVD risk factors was obtained. Data analyses included only 40 infants who completed one year of follow up.^ At 2 weeks of age, the median value for TC was 23 mg/dl higher for females than for males. This difference disappeared as infants got older. For males, most of the increase in TC median levels, from 114 to 137 mg/dl, occurred between the ages of 2 weeks and 2 months, whereas for the female group, TC levels increased moderately, about 10 mg/dl, between 9 and 12 months of age. Tracking of TC was examined by using Spearman's correlation analysis. There were strong correlations between measurements taken as early as 2 weeks of age with later measurements. These correlations were stronger and more significant for males than for females (for males, r varied between 0.51 to 0.70, whereas for females, r varied between 0.11 to 0.70). The association of body measurements with TC is no more than modest and is closer for female infants than for male infants. Analysis, also, showed that infants who received breast milk had a TC mean value 47 mg/dl higher than that for infants who received formula milk only during the period of breast feeding and this difference disappeared by age 12 months.^ In both genders, most of the increase in blood pressure (about 10-15 mmHg in both SBP and DBP) occurred during the first 4 months of life. Most of the increase for male infants occurred during the first 2 months of life, while for females, the increase in SBP and DBP was between the age of 2 and 4 months. Neither SBP nor DBP track well during the first year of life and most of the correlations between measurements at different ages were not significant for either gender. The cross-sectional relationship of blood pressure measurements and selected body measurements was assessed. For females, only at age of 12 months did DBP have positive and significant correlations with weight, length and Quetelet index (r = 0.57, 0.60 and 0.57, respectively). There were no significant correlations between blood pressure and body measurements for males. Finally, analysis showed that maternal history of CV risk factors was significantly related to SBP in the female infant group, but not for males. For DBP, neither maternal nor paternal history was related. ^

Soybean Aphid Efficacy Evaluation

Soybean (Glycine max), grown in Iowa and most of the north central region of the United States, has not required regular insecticide use. The soybean aphid, Aphis glycines (Hemiptera: Aphididae), causes yield losses from direct plant feeding, and has been shown to transmit several plant viruses. In Iowa, soybean aphid can colonize soybean fields in June and has developed into outbreaks in July and August capable of reducing yields by nearly 40 percent.

Soybean Aphid Efficacy Evaluation

Soybean, Glycine max (L.), grown in Iowa and most of the north central region of the United States, has not required regular insecticide usage. The soybean aphid, Aphis glycines (Hemiptera: Aphididae), causes yield losses from direct plant feeding, and has been shown to transmit several plant viruses. In Iowa, soybean aphid can colonize soybean fields in June and has developed into outbreaks in July and August capable of reducing yields by nearly 40 percent.

Carbon cycling in the northern Humboldt Current off Chile

The structure of the zooplankton foodweb and their dominant carbon fluxes were studied in the upwelling system off northern Chile (Mejillones Bay; 23°S) between October 2000 and December 2002. High primary production (PP) rates (18 gC/m**2 d) were mostly due to the net-phytoplankton size fraction (>23 µm). High PP has been traditionally associated with the wind-driven upwelling fertilizing effect of equatorial subsurface waters, which favour development of a short food chain dominated by a few small clupeiform fish species. The objective of the present work was to study the trophic carbon flow through the first step of this 'classical chain' (from phytoplankton to primary consumers such as copepods and euphausiids) and the carbon flow towards the gelatinous web composed of both filter-feeding and carnivorous zooplankton. To accomplish this objective, feeding experiments with copepods, appendicularians, ctenophores, and chaetognaths were conducted using naturally occurring plankton prey assemblages. Throughout the study, the total carbon ingestion rates showed that the dominant appendicularian species and small copepods consumed an average of 7 and 5 µgC/ind d, respectively. In addition, copepods ingested particles mainly in the size range of nano- and microplankton, whereas appendicularians ingested in the range of pico- and nanoplankton. Small copepods and appendicularians removed a small fraction of total daily PP (range 6-11%). However, when the pico- + nanoplankton fractions were the major contributors to total PP (oligotrophic conditions), grazing by small copepods increased markedly to 86% of total PP. Under these more oligotrophic conditions, the euphausiids grazing increased as well, but only reached values lower than 5% of total PP. During this study, chaetognaths and ctenophores ingested an average of 1 and 14 copepods/ind d, respectively. In terms of biomass consumed, the potential impact of carnivorous gelatinous zooplankton on the small-size copepod community (preferred prey) was important (2-12% of biomass removed daily). However, their impact produced more significant results on copepod abundance (up to 33%), which suggests that carnivorous gelatinous zooplankton may even modulate (control) the abundance of some species as well as the size structure of the copepod community.

Lack of evidence for elevated CO2-induced bottom-up effects on marine copepods: a dinoflagellate-calanoid prey-predator pair

Rising levels of atmospheric CO2 are responsible for a change in the carbonate chemistry of seawater with associated pH drops (acidification) projected to reach 0.4 units from 1950 to 2100. We investigated possible indirect effects of seawater acidification on the feeding, fecundity, and hatching success of the calanoid copepod Acartia grani, mediated by potential CO2-induced changes in the nutritional characteristics of their prey. We used as prey the autotrophic dinoflagellate Heterocapsa sp., cultured at three distinct pH levels (control: 8.17, medium: 7.96, and low: 7.75) by bubbling pure CO2 via a computer automated system. Acartia grani adults collected from a laboratory culture were acclimatized for 3 d at food suspensions of Heterocapsa from each pH treatment (ca. 500 cells/ml; 300 ?g C/l). Feeding and egg production rates of the preconditioned females did not differ significantly among the three Heterocapsa diets. Egg hatching success, monitored once per day for the 72 h, did not reveal significant difference among treatments. These results are in agreement with the lack of difference in the cellular stoichiometry (C : N, C : P, and N : P ratios) and fatty acid concentration and composition encountered between the three tested Heterocapsa treatments. Our findings disagree with those of other studies using distinct types of prey, suggesting that this kind of indirect influence of acidification on copepods may be largely associated with interspecific differences among prey items with regard to their sensitivity to elevated CO2 levels.

PeECE III - Pelagic Ecosystem CO2 Enrichment Study, Raunefjord, Bergen, Norway, 2005

The effects of CO2-induced seawater acidification on plankton communities were also addressed in a series of 3 mesocosm experiments, called the Pelagic Ecosystem CO2 Enrichment (PeECE I-III) studies, which were conducted in the Large-Scale Mesocosm Facilities of the University of Bergen, Norway in 2001, 2003 and 2005, respectively. Each experiment consisted of 9 mesocosms, in which CO2 was manipulated to initial concentrations of 190, 350 and 750 µatm in 2001 and 2003, and 350, 700 and 1050 µatm in 2005. The present dataset concerns PeECE III.

Customer loyalty plan at Residencia Gómez-Pardo, Universidad Politécnica de Madrid

Accommodation is a first need and one of the most important decisions that university students have to decide taking into account their limited budget. The satisfaction grade of these students is the relevant aspect for the administrators and managers of the university residences, because it allows assuring the viability and sustainability of this kind of accommodation. In a situation of decline in rate of retention of students into the residence, coupled with an environment of economic crisis. Hence, of disposable income reduction, it seems essential to get to know what factors affect the motivation to remain into the university residence more than others when it comes to the final choice. The offer?s increase of different kind of accommodation is another variable to be considered when taking the decision related to the management of this kind of accommodation. Thus, there is the need to know which are the key factors and to obtain information about these variables in order to go deep into the relevance grade with the aim to pursue the strategic objectives, that will allow to improve the relationship with the customer and to respond to his accommodation? needs. This article researches the motivation elements that lead the students to remain in a university residence or to abandon it in exchange or a different accommodation, as per example shared flats or individual apartments. This research work intends to be useful for the university residence?s managers in order to increase its incomes, to raise the satisfaction degree among its residents and to obtain better end results in the management of these properties. The fieldwork conducted in the Residencia Universitaria Gómez Pardo (RUGP), Universidad Politécnica de Madrid (UPM), for four semesters, which means students from 27 different grades (undergraduates) and 81 surveys finished, shows the following conclusions. Not only the relation with the residence?s personnel but also the quality and quantity of the feeding and the availability and quality of the internet service, constitute key factors when it comes to make the decision of remaining or of abandoning the residence when the semester comes to its end.

Sistema portátil de medida de dispositivos sometidos a ensayos en campo

El proyecto fin de carrera “Sistema Portátil de Medida de Dispositivos Sometidos a Ensayos en Campo” es un proyecto acometido para el desarrollo y evaluación de un sistema de medición portátil y confiable, que permita la realización de mediciones de curvas I-V en campo, en condiciones reales de funcionamiento. Dado que la finalidad de este proyecto fin de carrera es la obtención de un sistema para la realización de mediciones en campo, en la implementación del proyecto se tendrán como requisitos principales de diseño el tamaño, la fuente de alimentación, el peso del sistema, además de la fiabilidad y una relativa precisión en la realización de mediciones. Durante la realización de este proyecto y dados los requerimientos anteriores de portabilidad y fiabilidad, se ha buscado ofrecer una solución de compromiso diseñando un equipamiento que sea realizable, que cumpla con los objetivos anteriores con un coste que no sea elevado y con la característica de que disponga de una facilidad de manejo que permita a cualquier usuario la utilización del mismo. El sistema final diseñado está basado en el dispositivo de adquisición de datos MyDAQ de National Instruments que permite la realización de múltiples tipos de mediciones. En base a este dispositivo de adquisición de datos, se ha diseñado un sistema de medición con una arquitectura que se implementa a través de un ordenador portátil, con un software de medición instalado que recopila e interpreta los datos, y que alimenta y controla al dispositivo a través del puerto USB. El sistema también implementa una carga variable que permite la medición de la curva I-V en iluminación de células o mini-paneles fotovoltaicos. Este diseño permite que para la realización de las mediciones de las curvas I-V en iluminación en campo sólo se requiera conectar el dispositivo de adquisición a un PC portátil con batería y a la carga variable. Aunque este diseño es específico para la medición de células solares se ha implementado de forma que pueda extrapolarse fácilmente a otro tipo de medición de tensión y corriente. Para la comprobación de la precisión del sistema portátil de medidas, durante el proyecto se ha procedido a la comparación de los resultados obtenidos del sistema diseñado con un equipo de caracterización en laboratorio. Dicho sistema de alta exactitud permite cuantificar la degradación real de la célula y establecer una comparación de mediciones con el sistema portátil de medida, ofreciendo resultados satisfactorios en todas las mediciones realizadas y permitiendo concluir la evaluación del sistema portátil como apto para las mediciones de dispositivos en campo. El proceso de evaluación del equipamiento diseñado consistiría en la medida de la curva I-V en laboratorio de un dispositivo fotovoltaico con instrumentación de alta precisión y condiciones controladas de luz y temperatura de un dispositivo, célula o mini-panel. Tras la medida inicial las células se instalarían en campo y se realizaría una caracterización periódica de los dispositivos mediante el sistema portátil de medida, que permitiría evidenciar si en la curva I-V bajo iluminación existe degradación, y en qué zona de la curva. Al finalizar el ensayo o en periodos intermedios se desmontarían los dispositivos para volver a medir la curva I-V con exactitud en laboratorio. Por tanto el sistema portátil de medida, debe permitir evaluar la evolución de la curva I-V en condiciones ambientales similares a obtenidas en medidas anteriores, y a partir de la misma determinar el modo de degradación del dispositivo, no siendo necesaria una elevada precisión de medida para ofrecer resultados exactos de degradación, que sólo podrán medirse en el laboratorio. ABSTRACT. The final degree project "Portable Measurement System For Devices Under Field Tests" is a project undertaken for the development and evaluation of portable and reliable measurement equipment, which allows the realization of I-V curve measurements in field conditions actual operation. Since the purpose of this final project is to obtain a system for conducting field measurements in the implementation of the project will have as main design requirements for size, power supply, system weight, plus reliability and precision relative to the taking of measurements. During the development of this project and given the above requirements portability and reliability, has sought to offer a compromise designing equipment that is achievable, that meets the above objectives with a cost that is not high and the feature that available management facility that allows any user to use it. The final system is designed based on the acquisition device MyDAQ NI data that allows the execution of multiple types of measurements. Based on this data acquisition device, we have designed a measurement system with an architecture that is implemented via a laptop, with measurement software installed that collects and interprets data, and feeds and controls the device through the USB port. The system also implements a variable load which allows measurement of the I-V curve lighting photovoltaic cells. This design allows performing measurements of I-V curves in lighting field is only required to connect the device to purchase a laptop with a battery and variable load. Although this design is specific for the measurement of solar cells has been implemented so that it can easily be extrapolated to other types of measuring voltage and current. To test the accuracy of the portable measurement system during the project has been carried out to compare the results of the designed system, a team of laboratory characterization. This system of high accuracy to quantify the actual degradation of the cell and a comparison of measurements with portable measurement system, providing satisfactory results in all measurements and allowing complete portable system assessment as suitable for measurements of devices field. The evaluation process designed equipment would be far laboratory I-V curve of a photovoltaic device with high precision instrumentation controlled light and temperature of a device, panel or mini-cell conditions. After initial measurement cells settle in a periodic field and device characterization will be achieved through the portable measurement system, which would show whether the I-V curve under illumination degradation exists, and in which area of the curve. At the end of the trial or in interim periods devices to remeasure the I-V curve accurately in laboratory dismount. Therefore the portable measurement system should allow evaluating the evolution of the I-V curve similar to previous measurements obtained in ambient conditions, and from it determine the mode of degradation of the device, not a high measurement accuracy to be necessary to provide degradation accurate results, which can only be measured in the laboratory.

Role of fibre in broiler diets - Firend or foe?

The fibrous fraction of the feeds encompasses a group of heterogeneous compounds differing in chemical composition and physical properties (Graham and Aman, 1991, Bach Knudsen, 2001). Dietary fiber is the most used term to define the fiber fraction of ingredients and feeds, and includes cell walls, stored non-starch polysaccharides (NSP), and lignin (Bach Knudsen, 2001). Based on their physico-chemical properties, DF can be divided into soluble and insoluble fractions with distinct effects on digestive physiology and animal metabolism. Consequently, the benefits of fiber inclusion in poultry diets will vary depending on factors such as characteristics of the fiber source, type of bird, and digestive health status.