Mucosa-associated but not luminal Escherichia coli is augmented in Crohn's disease and ulcerative colitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exercise preconditioning modulates genotoxicity induced by doxorubicin in multiple organs of rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Rheological and thermophysical properties of blackberry juice

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The effect of sodium chloride on the formation of W/O microemulsions in soy bean oil/surfactant/water systems and the solubilization of small hydrophilic molecules

Partial pseudoternary phase diagrams were constructed for soy bean oil (SBO)/surfactant/NaCl aqueous solution systems, at 25 degrees C, using the anionic sodium bis(2-ethylhexyl) sulfosuccinate (ACT) and zwiterionic phosphatidylcholine (PC) or mixtures of these surfactants. The isotropic single phase of water-in-oil (W/O) microemulsions (MEs) is shown in the phase diagram and their viscosity reported. ME samples containing small amount of surfactant exhibit slightly higher viscosity than pure SBO, and were used in the solubilization of small water soluble molecules. NaCl enhances the area of the ME phase and MEs with different surfactant composition exhibit different induction time as obtained from tests of oxidative stability, and so are the MEs enriched with ascorbic acid, folic acid and FeSO4, with the latter exhibiting lower stability. The so prepared enriched soy bean oil has potential application in food industry since the surfactants are food grade. (C) 2007 Elsevier B.V. All rights reserved.

Fullerene and omega-3 and omega-6 fatty acids on fish brain antioxidant status

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of photodynamic therapy on clinical isolates of Staphylococcus spp

Staphylococcus spp. are opportunistic microorganisms known for their capacity to develop resistance against antimicrobial agents. The objective of this study was to evaluate the effect of photodynamic therapy (PDT) on 20 Staphylococcus strains isolated from the human oral cavity, including S. aureus, S. schleiferi, S. epidermidis, S. capitis, S. haemolyticus, and S. lentus. A suspension of each Staphylococcus strain (10(6) cells/mL) was submitted to PDT using methylene blue and a low power laser. The isolated effects of methylene blue, laser treatment and ciprofloxacin were also evaluated. After the experimental treatments, 0.1 mL aliquots of the suspensions were seeded onto BHI agar for determination of the number of colony-forming units (CFU/mL). The results were analyzed by analysis of variance and Tukey's test (p < 0.05). The mean reduction in bacterial counts of the strains submitted to PDT ranged from 4.89 to 6.83 CFU (log10)/mL, with the observation of a decreasing susceptibility to treatment of S. schleiferi, S. haemolyticus, S. epidermidis, S. capitis, S. aureus, and S. lentus. The results showed that PDT was effective in reducing the number of viable cells of all clinical Staphylococcus isolates studied.

Effectiveness of 2% peracetic acid for the disinfection of gutta-percha cones

The aim of this study was to evaluate the effectiveness of 2% peracetic acid for the disinfection of gutta-percha cones contaminated in vitro with Escherichia coli, Staphylococcus aureus, Streptococcus mutans, Candida albicans and Bacillus subtilus (in spore form). Two hundred and twenty-five gutta-percha cones were contaminated with standardized suspensions of each microorganism and incubated at 37 degrees C for 24 h. The cones were divided into 10 experimental groups (n = 15), according to the microorganism tested and disinfection testing times. The disinfection procedure consisted of immersing each cone in a plastic tube containing the substance. The specimens remained in contact with the substance for 1 or 2.5 minutes. Afterwards, each cone was transferred to a 10% sodium thiosulphate solution (Na2S2O3) to neutralize the disinfectant. Microbial biofilms adhering to the cones were dispersed by agitation. Aliquots of 0.1 ml of the suspensions obtained were plated on Sabouraud dextrose agar, or brain and heart infusion agar, and incubated at 37 degrees C for 24 h. The results were expressed in colony forming units (CFU/ml) and the data were submitted to the Wilcoxon Signed Rank Test (level of significance at 0.05). A significant reduction was observed, after 1 minute of exposure, in the test solution for C. albicans (p = 0.0190), S. aureus (p = 0.0001), S. mutans (p = 0.0001), B. subtilis (p = 0.0001), and E. coli (p = 0.0001). After 2.5 minutes of exposure, 100% of the microbial inocula were eliminated. It was concluded that the 2% peracetic acid solution was effective against the biofilms of the tested microorganisms on gutta-percha cones at 1 minute of exposure.

Comparison of the photodynamic fungicidal efficacy of methylene blue, toluidine blue, malachite green and low-power laser irradiation alone against Candida albicans

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In vitro adherence of Candida albicans isolated from patients with chronic periodontitis

Adherence is considered an extremely important virulence factor in yeast. Objective: The aim of this study was to analyze the adherence to epithelial cells of C. albicans isolated from patients with chronic periodontitis in comparison to healthy patients. Material and methods: Candida albicans cells isolated from individuals with chronic periodontitis (n=25) and healthy controls (n=25) were included in this study. Suspensions of C. albicans (10(6) cells/rnL) and epithelial cells (10(5) cells/mL) were mixed and incubated at 37 degrees C for 1 h. The number of yeasts adhered to 25 epithelial cells was counted. Results: The number of C. albicans cells adhered to epithelial cells was statistically higher in the chronic periodontitis group than in the control group (Student's t-test, p=0.000). Conclusion: The results of the present study suggest a higher Candida adherence of samples isolated from patients with chronic periodontitis.

Susceptibility of Candida albicans and Candida dubliniensis to erythrosine- and LED-mediated photodynamic therapy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação entre dois tipos de suspensão passiva de barra em condições simuladas de pista de prova normalizada

In this paper we conducted several analysis of the simulated dynamic behavior of two passive suspension types of the trailed sprayer booms. The suspension analysis was conducted under conditions of a bump track test ISO 5008, with two levels of speed (5 km h(-1) and 15 km h(-1)) and two track profiles proposed in these standards (bumpy and smooth). It was used the simulations software MATLAB (R), SIMULINK (R) and Visual Nastran (R). The results obtained showed that suspensions of trapezoidal type have good performance at low frequencies input (omega < 0,2 Hz) while suspensions of simple pendulum type have good performance in others conditions.

Glacially striated, soft sediment surfaces on late Paleozoic tillite at São Luiz do Purunã, PR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The copper resistance operon copAB from Xanthomonas axonopodis pathovar citri: gene inactivation results in copper sensitivity

Xanthomonas axonopodis pv. citri (Xac) causes citrus canker and the completion of the Xac genome sequence has opened up the possibility of investigating basic cellular mechanisms at the genomic level. Copper compounds have been extensively used in agriculture to control plant diseases. The copA and copB genes, identified by annotation of the Xac genome, encode homologues of proteins involved in copper resistance. A gene expression assay by Northern blotting revealed that copA and copB are expressed as a unique transcript specifically induced by copper. Synthesis of the gene products was also induced by copper, reaching a maximum level at 4 h after addition of copper to the culture medium. CopA was a cytosolic protein and CopB was detected in the cytoplasmic membrane. The gene encoding CopA was disrupted by the insertion of a transposon, leading to mutant strains that were unable to grow in culture medium containing copper, even at the lowest CUSO4 concentration tested (0.25 mM), whereas the wild-type strain was able to grow in the presence of 1 mM copper. Cell suspensions of the wild-type and mutant strains in different copper concentrations were inoculated in lemon leaves to analyse their ability to induce citrus canker symptoms. Cells of mutant strains showed higher sensitivity than the wild-type strain in the presence of copper, i.e. they were not able to induce citrus canker symptoms at high copper concentrations and exhibited a more retarded growth in planta.

Influence of Hydrothermal Synthesis Conditions and Device Configuration on the Photoresponse of UV Sensors Based on ZnO Nanorods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nanopore size growth and ultrafiltration performance of SnO2 ceramic membranes prepared by sol-gel route

Supported ceramic membranes have been produced by the sol-casting procedure from aqueous colloidal suspensions prepared by the sol-gel route. Coatings on a tubular alumina support have been successfully performed leading to crack free layers. Samples have been sintered at 400, 500 and 600 degreesC, and the effect of heating treatment on the nanostructure and on the ultrafiltration properties are analyzed. The characterization has been done by high resolution scanning electron microscopy, nitrogen adsorption-desorption isotherms, water permeation and cut-off determination using polyethylene glycol standard solutions. The micrographs have revealed that grains and pore size increase with the temperature, whereas their shape remains invariant. This results is in agreements with N-2 adsorption-desorption analyses, which have revealed that the mean pore size diameter increases from 4 to 10 nm as the sintering temperature increases from 400 to 600 degreesC, while the total porosity remains constant. Furthermore, the tortuosity, calculated from water permeability, is essentially invariant with the sintering temperatures. The membranes cut-off, determined with a retention rate equal to 95%, are 3500, 6500 and 9000 g . mol(-1) for 400, 500 and 600 degreesC, respectively, showing that the permeation properties of SnO2 ultrafiltration membranes can easily be controlled by sintering condition.