A MARKET-BASED APPROACH TO 3D PRINTING FOR ECONOMIC DEVELOPMENT IN GHANA

The purpose of this report is to create the foundation for further study of a market-based approach to 3D printing as an instrument for economic development in Ghana. The delivery of improved products and services to the most underserved markets is needed to spur economic activity and improve standards of living. The relationship between economic development and the advancement of technology is considered within the context of Ghana. An opportunity for market entry exists within both the bottom of the economic pyramid and the mid-segment market. 3D printing (additive manufacturing) has proven to be a disruptive technology that has demonstrated an ability to expedite the speed of innovations and create products that were previously not possible. An investigation of how 3D printers can be used to create improved products for the most underserved markets within Ghana is presented. Questions are asked to elucidate how and when adoption of 3D printers and 3D printed products may occur in the future. Based upon the existing barriers to adoption, 3D printing technology must improve before widespread adoption will occur in Ghana.

Using induced pluripotent stem cells (IPSCS) as a replacement for in vivo models to screen novel therapies in chronic myeloid leukaemia (CML)

Tyrpsine kinase inhibitors (TKIs) effectively target progenitors and mature leukaemic cells but prove less effective at eliminating leukaemic stem cells (LSCs) in patients with chronic myeloid leukaemia (CML). Several reports indicate that the TGFβ superfamily pathway is important for LSC survival and quiescence. We conducted extensive microarray analyses to compare expression patterns in normal haemopoietic stem cells (HSC) and progenitors with CML LSC and progenitor populations in chronic phase (CP), accelerated phase (AP) and blast crisis (BC) CML. The BMP/SMAD pathway and downstream signalling molecules were identified as significantly deregulated in all three phases of CML. The changes observed could potentiate altered autocrine signalling, as BMP2, BMP4 (p<0.05), and ACTIVIN A (p<0.001) were all down regulated, whereas BMP7, BMP10 and TGFβ (p<0.05) were up regulated in CP. This was accompanied by up regulation of BMPRI (p<0.05) and downstream SMADs (p<0.005). Interestingly, as CML progressed, the profile altered, with BC patients showing significant over-expression of ACTIVIN A and its receptor ACVR1C. To further characterise the BMP pathway and identify potential candidate biomarkers within a larger cohort, expression analysis of 42 genes in 60 newly diagnosed CP CML patient samples, enrolled on a phase III clinical trial (www.spirit-cml.org) with greater than 12 months follow-up data on their response to TKI was performed. Analysis revealed that the pathway was highly deregulated, with no clear distinction when patients were stratified into good, intermediate and poor response to treatment. One of the major issues in developing new treatments to target LSCs is the ability to test small molecule inhibitors effectively as it is difficult to obtain sufficient LSCs from primary patient material. Using reprogramming technologies, we generated induced pluripotent stem cells (iPSCs) from CP CML patients and normal donors. CML- and normal-derived iPSCs were differentiated along the mesodermal axis to generate haemopoietic and endothelial precursors (haemangioblasts). IPSC-derived haemangioblasts exhibited sensitivity to TKI treatment with increased apoptosis and reduction in the phosphorylation of downstream target proteins. 4 Dual inhibition studies were performed using BMP pathway inhibitors in combination with TKI on CML cell lines, primary cells and patient derived iPSCs. Results indicate that they act synergistically to target CML cells both in the presence and absence of BMP4 ligand. Inhibition resulted in decreased proliferation, irreversible cell cycle arrest, increased apoptosis, reduced haemopoietic colony formation, altered gene expression pattern, reduction in self-renewal and a significant reduction in the phosphorylation of downstream target proteins. These changes offer a therapeutic window in CML, with intervention using BMP inhibitors in combination with TKI having the potential to prevent LSC self-renewal and improve outcome for patients. By successfully developing and validating iPSCs for CML drug screening we hope to substantially reduce the reliance on animal models for early preclinical drug screening in leukaemia.

Less popular but more democratic? Corrie, Clarkson and the dancing Cru

The central cultural experience of modernity has been change, both the ‘creative destruction’ of existing structures, and the growth, often exponential, of new knowledge. During the twentieth century, the central cultural platform for the collective experience of modernising societies changed too, from page and stage to the screen – from publishing, the press and radio to cinema, television and latterly computer screens. Despite the successive dominance of new media, none has lasted long at the top. The pattern for each was to give way to a successor platform in popularity, but to continue as part of an increasingly crowded media menu. Modern media are supplemented not supplanted by their successors.

Digital scholarship and pedagogy, the next step : cultural science.

There are two aspects to the problem of digital scholarship and pedagogy. One is to do with scholarship; the other with pedagogy. In scholarship, the association of knowledge with its printed form remains dominant. In pedagogy, the desire to abandon print for ‘new’ media is urgent, at least in some parts of the academy. Film and media studies are thus at the intersection of opposing forces – pulling the field ‘back’ to print and ‘forward’ to digital media. These tensions may be especially painful in a field whose own object of study is another form of communication, neither print nor digital but broadcast. Although print has been overtaken in the popular marketplace by audio-visual forms, this was never achieved in the domain of scholarship. Even when it is digitally distributed, the output of research is still a ‘paper.’ But meanwhile, in the realm of teaching, production- and practice-based pedagogy has become firmly established. Nevertheless a disjunction remains, between high-end scholarship in research universities and vocational training in teaching institutions; but neither is well equipped to deal with the digital challenge.

Artists, audience and participations

We spent a fare amount of time thinking and debating where to draw the line between what is and what is not single-screen-based interactive media. This really is a tricky category. I would like to use this opportunity to raise certain issues about this very new category introduced this year to ifva. First of all, what do we mean by "interactive" media? If we conceptually or philosophically try to describe it, almost every artifact (not only those who are intended as a piece of art) can be perceived as "interactive" media as soon as one sees/ recognises it and begins interacting with it physically and/or mentally. What about when we limit this to computer related media? This certainly limits the scope, but well, it is becoming increasinly difficult to find art and design that are considered innovative without the use of computer. the term "single-screen" certainly makes it more specific, but as we saw from a range of works submitted to this category, people do come up with various interpretations to it. Some simply submitted work that can be viewed with computer screen, which didn't allow much user participation, while others provided various degrees of user/audience participation. What does "singel-screen-based interactive media" mean?

Abstimmen oder Schwimmen? Plebiszitarer Sport und synchronisierte Wahlen. [Sink or swim: Plebiscitary sport and synchronised voting.][In German]

This chapter starts from the observation that new sporting attributes are growing up unnoticed in popular entertainment and ‘reality’ TV. They celebrate not individual heroics but spectator-oriented teamwork which must look effortless and stylish. Instead of objective measurements – ‘faster, higher, stronger’ – winners are picked by voting and consumer choice. Sport and media are converging and integrating. As they do so, what counts as sport, why it is valued, and what it symbolises for contemporary culture, are all changing. I take these changes to be emblematic of something emergent in the culture at large as the modernist paradigm shifts towards a new consumerist paradigm. This is symbolised in new sports, of which the paradigm example is synchronised swimming. The chapter traces these changes via the career and legacy of the Australian swimming and fashion pioneer Annette Kellerman.

The city, self, and connections : transyouth and urban social networking in Seoul

The end of the Korean War in 1953 marked the beginning of Seoul’s transformation from the shattered capital city of South Korea to one of the most connected, populous, and fast-changing hubs of global economy. Seoul’s technosocial development has been celebrated nationally and internationally. To the outside, young Koreans’ swift and extensive adoption and adaptation to digital technologies has been a subject of exotification; to adults in Korea, it has been a subject of criticism (see Yoon in this volume). With the understanding that ‘the city is connections,’ it is crucial to study not only the macro-level design of the city as a network (through policy, for example), but also its micro-level construction at the intersection of people, place, and technology. Accordingly, this chapter explores this exact intersection to comprehensively portray the constant renewal of the city as imagined and experienced by young Koreans. The chapter is based on fieldwork conducted in Seoul, South Korea, from 2007 to 2008 as part of a research project on the mobile play culture of Seoul transyouth, the transitional demographic situated between youth and adulthood, and the pioneers of the Korean ‘broadband miracle’ (Hazlett, 2004). The study draws upon transdisciplinary research data including interviews, questionnaires, diaries, and Shared Visual Ethnography (SVE) to render the everyday urban social networking of young Seoulites with and through which they interact to constantly (re)create the city and the self.

Documentary practice in a participatory culture

Debates concerning the veracity, ethics and politics of the documentary form circle endlessly around the function of those who participate in it, and the meaning attributed to their participation. Great significance is attached to the way that documentary filmmakers do or do not participate in the world they seek to represent, just as great significance is attached to those subjects whose participation extends beyond playing the part of eyewitness or expert, such that they become part of the very filmmaking process itself. This Ph.D. explores the interface between documentary practice and participatory culture by looking at how their practices, discursive fields and histories intersect, but also by looking at how participating in one might mean participating in the other. In short, the research is an examination of participatory culture through the lens of documentary practice and documentary criticism. In the process, however, this examination of participatory culture will in turn shed light on documentary thinking, especially the meaning and function of ‘the participant’ in contemporary documentary practice. A number of ways of conceiving of participation in documentary practice are discussed in this research, but one of the ideas that gives purpose to that investigation is the notion that the participant in contemporary documentary practice is someone who belongs to a participatory culture in particular. Not only does this mean that those subjects who play a part in a documentary are already informed by their engagement with a range of everyday media practices before the documentary apparatus arrives, the audience for such films are similarly informed and engaged. This audience have their own expectations about how they should be addressed by media producers in general, a fact that feeds back into their expectations about participatory approaches to documentary practice too. It is the ambition of this research to get closer to understanding the relationship between participants in the audience, in documentary and ancillary media texts, as well as behind the camera, and to think about how these relationships constitute a context for the production and reception of documentary films, but also how this context might provide a model for thinking about participatory culture itself. One way that documentary practice and participatory culture converge in this research is in the kind of participatory documentary that I call the ‘Camera Movie’, a narrow mode of documentary filmmaking that appeals directly to contemporary audiences’ desires for innovation and participation, something that is achieved in this case by giving documentary subjects control of the camera. If there is a certain inevitability about this research having to contend with the notion of the ‘participatory documentary’, the ‘participatory camera’ also emerges strongly in this context, especially as a conduit between producer and consumer. Making up the creative component of this research are two documentaries about the reality television event Band In A Bubble, and participatory media practices more broadly. The single-screen film, Hubbub , gives form to the collective intelligence and polyphonous voice of contemporary audiences who must be addressed and solicited in increasingly innovative ways. One More Like That is a split-screen, DVD-Video with alternate audio channels selected by a user who thereby chooses who listens and who speaks in the ongoing conversation between media producers and media consumers. It should be clear from the description above that my own practice does not extend to highly interactive, multi-authored or web-enabled practices, nor the distributed practices one might associate with social media and online collaboration. Mine is fundamentally a single authored, documentary video practice that seeks to analyse and represent participatory culture on screen, and for this reason the Ph.D. refrains from a sustained discussion of the kinds of collaborative practices listed above. This is not to say that such practices don’t also represent an important intersection of documentary practice and participatory culture, they simply represent a different point of intersection. Being practice-led, this research takes its procedural cues from the nature of the practice itself, and sketches parameters that are most enabling of the idea that the practice sets the terms of its own investigation.

Drivers of technology substitution : successive generations of high tech products

Principal Topic High technology consumer products such as notebooks, digital cameras and DVD players are not introduced into a vacuum. Consumer experience with related earlier generation technologies, such as PCs, film cameras and VCRs, and the installed base of these products strongly impacts the market diffusion of the new generation products. Yet technology substitution has received only sparse attention in the diffusion of innovation literature. Research for consumer durables has been dominated by studies of (first purchase) adoption (c.f. Bass 1969) which do not explicitly consider the presence of an existing product/technology. More recently, considerable attention has also been given to replacement purchases (c.f. Kamakura and Balasubramanian 1987). Only a handful of papers explicitly deal with the diffusion of technology/product substitutes (e.g. Norton and Bass, 1987: Bass and Bass, 2004). They propose diffusion-type aggregate-level sales models that are used to forecast the overall sales for successive generations. Lacking household data, these aggregate models are unable to give insights into the decisions by individual households - whether to adopt generation II, and if so, when and why. This paper makes two contributions. It is the first large-scale empirical study that collects household data for successive generations of technologies in an effort to understand the drivers of adoption. Second, in comparision to traditional analysis that evaluates technology substitution as an ''adoption of innovation'' type process, we propose that from a consumer's perspective, technology substitution combines elements of both adoption (adopting the new generation technology) and replacement (replacing the generation I product with generation II). Based on this proposition, we develop and test a number of hypotheses. Methodology/Key Propositions In some cases, successive generations are clear ''substitutes'' for the earlier generation, in that they have almost identical functionality. For example, successive generations of PCs Pentium I to II to III or flat screen TV substituting for colour TV. More commonly, however, the new technology (generation II) is a ''partial substitute'' for existing technology (generation I). For example, digital cameras substitute for film-based cameras in the sense that they perform the same core function of taking photographs. They have some additional attributes of easier copying and sharing of images. However, the attribute of image quality is inferior. In cases of partial substitution, some consumers will purchase generation II products as substitutes for their generation I product, while other consumers will purchase generation II products as additional products to be used as well as their generation I product. We propose that substitute generation II purchases combine elements of both adoption and replacement, but additional generation II purchases are solely adoption-driven process. Extensive research on innovation adoption has consistently shown consumer innovativeness is the most important consumer characteristic that drives adoption timing (Goldsmith et al. 1995; Gielens and Steenkamp 2007). Hence, we expect consumer innovativeness also to influence both additional and substitute generation II purchases. Hypothesis 1a) More innovative households will make additional generation II purchases earlier. 1 b) More innovative households will make substitute generation II purchases earlier. 1 c) Consumer innovativeness will have a stronger impact on additional generation II purchases than on substitute generation II purchases. As outlined above, substitute generation II purchases act, in part like a replacement purchase for the generation I product. Prior research (Bayus 1991; Grewal et al 2004) identified product age as the most dominant factor influencing replacements. Hence, we hypothesise that: Hypothesis 2: Households with older generation I products will make substitute generation II purchases earlier. Our survey of 8,077 households investigates their adoption of two new generation products: notebooks as a technology change to PCs, and DVD players as a technology shift from VCRs. We employ Cox hazard modelling to study factors influencing the timing of a household's adoption of generation II products. We determine whether this is an additional or substitute purchase by asking whether the generation I product is still used. A separate hazard model is conducted for additional and substitute purchases. Consumer Innovativeness is measured as domain innovativeness adapted from the scales of Goldsmith and Hofacker (1991) and Flynn et al. (1996). The age of the generation I product is calculated based on the most recent household purchase of that product. Control variables include age, size and income of household, and age and education of primary decision-maker. Results and Implications Our preliminary results confirm both our hypotheses. Consumer innovativeness has a strong influence on both additional purchases (exp = 1.11) and substitute purchases (exp = 1.09). Exp is interpreted as the increased probability of purchase for an increase of 1.0 on a 7-point innovativeness scale. Also consistent with our hypotheses, the age of the generation I product has a dramatic influence for substitute purchases of VCR/DVD (exp = 2.92) and a strong influence for PCs/notebooks (exp = 1.30). Exp is interpreted as the increased probability of purchase for an increase of 10 years in the age of the generation I product. Yet, also as hypothesised, there was no influence on additional purchases. The results lead to two key implications. First, there is a clear distinction between additional and substitute purchases of generation II products, each with different drivers. Treating these as a single process will mask the true drivers of adoption. For substitute purchases, product age is a key driver. Hence, implications for marketers of high technology products can utilise data on generation I product age (e.g. from warranty or loyalty programs) to target customers who are more likely to make a purchase.

Integrating concrete and virtual materials in an elementary mathematics classroom : a case study of success with fractions

This paper describes an approach to introducing fraction concepts using generic software tools such as Microsoft Office's PowerPoint to create "virtual" materials for mathematics teaching and learning. This approach replicates existing concrete materials and integrates virtual materials with current non-computer methods of teaching primary students about fractions. The paper reports a case study of a 12-year-old student, Frank, who had an extremely limited understanding of fractions. Frank also lacked motivation for learning mathematics in general and interacted with his peers in a negative way during mathematics lessons. In just one classroom session involving the seamless integration of off-computer and on-computer activities, Frank acquired a basic understanding of simple common equivalent fractions. Further, he was observed as the session progressed to be an enthusiastic learner who offered to share his learning with his peers. The study's "virtual replication" approach for fractions involves the manipulation of concrete materials (folding paper regions) alongside the manipulation of their virtual equivalent (shading screen regions). As researchers have pointed out, the emergence of new technologies does not mean old technologies become redundant. Learning technologies have not replaced print and oral language or basic mathematical understanding. Instead, they are modifying, reshaping, and blending the ways in which humankind speaks, reads, writes, and works mathematically. Constructivist theories of learning and teaching argue that mathematics understanding is developed from concrete to pictorial to abstract and that, ultimately, mathematics learning and teaching is about refinement and expression of ideas and concepts. Therefore, by seamlessly integrating the use of concrete materials and virtual materials generated by computer software applications, an opportunity arises to enhance the teaching and learning value of both materials.

Source location of acoustic emission waves for structural health monitoring of bridges

The process of structural health monitoring (SHM) involves monitoring a structure over a period of time using appropriate sensors, extracting damage sensitive features from the measurements made by the sensors and analysing these features to determine the current state of the structure. Various techniques are available for structural health monitoring of structures and acoustic emission (AE) is one technique that is finding an increasing use. Acoustic emission waves are the stress waves generated by the mechanical deformation of materials. AE waves produced inside a structure can be recorded by means of sensors attached on the surface. Analysis of these recorded signals can locate and assess the extent of damage. This paper describes preliminary studies on the application of AE technique for health monitoring of bridge structures. Crack initiation or structural damage will result in wave propagation in solid and this can take place in various forms. Propagation of these waves is likely to be affected by the dimensions, surface properties and shape of the specimen. This, in turn, will affect source localization. Various laboratory test results will be presented on source localization, using pencil lead break tests. The results from the tests can be expected to aid in enhancement of knowledge of acoustic emission process and development of effective bridge structure diagnostics system.