998 resultados para Processos de avaliação
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This study aimed to characterize and compare the performance of students with Attention Deficit Hyperactivity Disorder and students with good academic performance on the readingassessment processes. Forty students ranging from 8 years and 2 months old to 10 years and 11 months old, from both genders, from 1st to 4th grades of elementary level, participated inthis study, distributed in two groups: GI, with 20 students with interdisciplinary diagnosis ofAttention Deficit Hyperactivity Disorder (ADHD), and GII, 20 students with good academic performance,paired with GI according to gender, age and school level. The students wereassessedthrough the Brazilian adaptation of the Assessment Process of Reading – PROLEC, composedof four blocks: identification of letters, lexical, syntactic and semantic processes. Statisticallysignificant difference occurred between GI and GII in the PROLEC tests, with the exception of thesame-different and lexical decision tests, indicating that the students from GI presented inferior performance when compared with students from GII. Regarding the classification of the resultsof PROLEC, there was a statistically significant difference in the lexical, syntactic and semanticprocesses and the letter and sound test, with the exception of same-different tests of identificationof letters process. The findings suggests that the group of students with ADHD showsinferior performance compared to the group without disabilities, highlighting that the attentionfactor affects the cognitive functions impairing the acquisition of skills necessary for reading.
Resumo:
This study aimed to characterize and to compare the performance of students with an interdisciplinary diagnosis of dyslexia and attention deficit hyperactivity disorder (ADHD) in students with good academic performance on the reading processes. Sixty students from both genders, from 2nd to 4th grades of municipal public schools in Marília - SP participated in this study, they were distributed as follows: GI, 20 students with interdisciplinary diagnosis of dyslexia; GII, 20 students with ADHD and GIII, 20 students with good academic performance, paired according to gender, age and grade level with GI and GII. The students were submitted to the application of the assessment of reading processes (PROLEC) composed by four processes: letters identification, lexical, syntactical and semantic. The results highlighted that the students of GIII showed superior performance comparing with GI and GII. There was difference between GI and GII only in low frequency word reading and non words reading of the lexical process. The inferior performance from GI and GII in the PROLEC tests can be justified by the difficulty on the coding and decoding abilities. In ADHD students this difficulty was due to impaired interaction between the visual, linguistic, attention and auditory processing and in the dyslexic students was due to failure at the phonological mediation process, which depends on the knowledge of rules of grapheme - phoneme conversion to the acquisition of word reading. These changes affect the reading achievement and the comprehension of the read text.
Resumo:
This research has been conducted with the objective of identifying the similarities and the differences between the school management system proposed by the government and the school management system applied on a daily basis by the school management team. This management team is composed by the school principal, the coordinator teacher, and the educational supervisor of a school in the inner state of Sao Paulo. Data is being collected researching the references already existed about the school management system, documents and files of the school, and by an interview with the management team. It is expected that this research will identify the close and the distant aspects between the evaluation of the management team about itself and the evaluation conducted by the school in the process of educational evaluations. The data obtained through this research job is being analyzed considering its quality aspects.
Resumo:
Pós-graduação em Engenharia Mecânica - FEB
Resumo:
A análise termográfica é uma tecnologia proveniente da engenharia e utilizada na Segunda Guerra Mundial para detecção de forças armadas inimigas. Foi aplicada inicialmente na medicina para avaliação de articulações com artrites e hoje apresenta importante função no diagnóstico de câncer de mama em mulheres. Na medicina veterinária, há mais de trinta anos é técnica de diagnóstico auxiliar na clínica de equinos, para avaliação de processos inflamatórios tais como tendinites, desmites, artrites, miosites ou ainda no diagnóstico de fraturas, lesões na coluna ou em nervos periféricos. Por ser uma técnica com alta sensibilidade, exige que seu operador tenha treinamento e doutrinamento, não só para a execução dos exames, mas também para a análise de seus resultados. Diante disso, muitos pesquisadores afirmaram que os exames termográficos de aplicabilidade científica deveriam ser realizados em local com temperatura controlada, em torno de 23oC. Ao se trabalhar com equinos, torna-se difícil encontrar ambientes amplos o suficiente e com controle de temperatura para que os exames sejam feitos, o que praticamente inviabilizaria o uso da termografia na pesquisa com cavalos. Assim, este trabalho propôs um método de padronização das temperaturas que permite realizar termografias de extremidades de membros em ambientes variando entre 18 e 35oC. O método proposto, nomeado como PadTemp, foi validado em cavalos saudáveis e aplicado em experimentos de verificação de eficácia de fármacos e de acompanhamento de cirurgias ortopédicas.
Resumo:
A utilização de extratos vegetais tem sido considerada uma forte tendência no desenvolvimento de formulações dermocosméticas, uma vez que podem apresentar diversas ações, como antioxidantes e despigmentantes, atuando tanto contra os processos de envelhecimento como hiperpigmentação da pele. Dentre as plantas que apresentam tais propriedades, o chá verde se destaca devido a sua riqueza em compostos polifenólicos e taninos condensados. O extrato seco de chá verde obtido através da extração com uma solução de acetona 70% apresenta o maior teor de fenólicos e flavonoides, mas pouca diferença quando comparado com o obtido de uma solução de acetona 50%. A alta concentração desses compostos no extrato seco é responsável pela ótima ação antioxidante do chá verde, tornando-o capaz de inibir 50% dos radicais livres do meio com apenas 4,62 µg/mL quando em solução metanólica. Entretanto, a sua atividade despigmentante não se torna evidenciada, com apenas 1,93% de ação com a mesma concentração de chá verde. Este extrato seco, quando incorporado a sistemas nanoestruturados como os sistemas líquido-cristalinos estabilizados com Procetyl AWS® passa a ter uma ação antioxidante potencializada, alcançando uma inibição de radicais livres em até, aproximadamente, 72%, enquanto sua capacidade despigmentante não é demonstrada, apresentando uma inibição de tirosinase de, no máximo, 0,88%. A caracterização estrutural foi realizada por meio de análises de microscopia de luz polarizada, comportamento reológico e perfil de textura das formulações. Para o estudo de estabilidade foram empregadas avaliação visual, centrifugação e pH. A atividade antioxidante foi determinada com base na ação seqüestrante do radical 2,2-difenil-1-picril-hidrazila (DPPH) e a ação despigmentante in vitro, avaliada quanto à inibição da tirosinase, pelo método enzimático... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
This paper addresses the context of emissions of Greenhouse Gases (GHG) from activities related to Coal, called fugitive emissions. The survey of factors, development, analysis, and suggestions for controlling emissions are conducted in order to reduce risks to the environment and people around it. The greenhouse gases absorb radiation, emitted by the Earth’s surface, and hinder their escape into space. This process is essential to terrestrial life. Increasing the concentration of those gases in the atmosphere has led to an increase in the terrestrial temperature. A selection of processes that emit gases and the study and development of calculations for measuring fugitive emissions applied in different sources from coal are performed. The greenhouse gases can be released from the extraction, processing, storage, and transportation of fossil fuels to the end consumer. Coal has 4 main fugitive factors: mining, post-mining, oxidation at low temperature, and uncontrolled combustion. The coal formation process produces methane (CH4) and carbon dioxide (CO2), being the methane, the main greenhouse gas from the coal mining and handling. The types of activities and the weight of each in the issuing process are observed. It is also made comparisons between the countries with the highest emissions rates. Are evaluated what has been done and what is needed to decrease emissions, for example the use of gas as an alternative fuel for energy generation
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Understanding the linkages between the natural elements is essential for being promoted the land use, occupation and sustainable management of environmental systems. Universal Soil Loss Equation (USLE), as a predictive model of erosion, is important to allowing the prevention of possible environmental impacts which may drastically interfere in natural or anthropic environments, as well as prevent potential financial wastes and even contribute to greater efficiency of agricultural production. This research will be working some USLE parameters, emphasizing topographic factor from Ribeirão Monjolo Grande watershed. Among the factors considered by the USLE, the Topographic Factor interferes directly in the erosive dynamic of a watershed because it involves variables related to hydrological processes that occur on it. In this research, were discussed different methods for obtaining the Topographic Factor (BERTONI e LOMBARDI NETO, 1985; MOORE e BURCH, 1986; DESMET E GOVERS, 1996) in GIS environment. After comparison between the methods, was indicated that best represents the conditions of geometry strand of the study area. Finally, other factors (R, K, C, P) considered by the USLE were obtained. The attainment of these parameters were guided by the use of geotechnologies, especially in Geographic Information Systems (GIS), with the assistance of secondary data and periodic field visits. The results obtained contributed to the understanding of hydrosedimentological dynamic in this area and serve as a viable strategy for studies of soil loss, aiming at developing consistent material for future researches about environmental planning and land management
Resumo:
Petroleum and its subproducts are considered a treat for the environmental quality because of the many environmental accidents that may occur during exploitation, transport and storage. A common remediation technique used in the contaminated areas is based on the use of surfactants, mainly the chemical ones, because they have low production costs. In the other hand, some microorganisms have indicate capacities of producing surfactants that emulsify substances and as result, offer a bigger contact surface for the microbiota degradation. This biossurfactants stand out in comparison with the chemical surfactants because they present lower micelar concentration values, are more tolerant for temperature and pH variation, because they are biodegradable, have low toxicity, higher emulsification and hydrocarbon solubilization index. In this way, after the surfactant application, a toxicity evaluation have to be made to identify the treatment effects. In soil, the activity of some microbial enzymes can show the environmental behavior of the contaminant under different treatment conditions. Dehydrogenase is one example of those enzymes that can demonstrate indirectly the effect of the pollutant on the soil microorganisms. The aim of this paper was to evaluate the toxicity after the addition of a surfactant and/or Pseudomonas aeruginosa LBI in soil contaminated by a mineral automotive lubricant. The previous mentioned bacteria are a potential biossurfactant (rhamnolipid) producer. In order to evaluate the toxicity, the dehydrogenase test was run. In this test, trifeniltetrazolium compound (TTC) after utilized as an electron acceptor, turns into trifenil formazan (TPF), that can be indirectly quantified using the absorbance measured by the spectrophotometer UV-visible. In this way, it was possible to quantify the dehydrogenase activity from the contaminated soil samples... (Complete abstract click electronic access below)
Resumo:
Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...
Resumo:
The disordered occupation in several cities in Brazil, is very common, especially during the rainy season, there are numerous cases of gravitational mass movements, with deads of human and builds destruction. The main objective of this work was to identify and map areas to mass movements, through the geo, the municipality of Várzea Paulista, the state of Sao Paulo. For the purpose, were prepared thematic maps of slope, geology, pedology, geomorphology and land use and occupation, which were overlaid using ArcGIS GIS Multicriteria Analysis. Each subject received a weight of influence to the outbreak of such processes and the final result was obtained map of susceptibility to mass movements of the city of Várzea Paulista. This survey found that there are many occupied areas within the city that require monitoring of the Government, especially in the rainy months, because they are in very fragile in terms of geological and geomorphological features. Considering that the data on the physical and natural aspects are scarce in the literature for this region, the results obtained in this study as well as the gathering of information of the physical and cartographic products developed, will greatly contribute to the administration of the municipality, subsidies they provide for the proper use planning and land tenure, pointing out the weak areas of the city geotechnical point of view
Resumo:
The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam
Resumo:
Currently with the growing technological advancement and global, new areas are being devastated, and as a result, the erosion became more frequent causing loss of soil, infiltration capacity of the surface and weathering of rocks. In this way, environmental studies are increasingly frequent to understand the environment in which we live, but also to avoid any degradation of the same and of finite natural resources, which are essential for human life. From this, this work has as main goal, analyzing the rates of chemical and mechanical erosive watershed of Ribeirão Jacutinga, at its mouth, in the city of Rio Claro, supporting environmental studies and sustainable development today. Order to reach these values were measured and total dissolved solids in suspension in the stream during the months from January to July 2012. As results included higher rates of both physical and chemical weathering in the rainy months, especially january