Assessing the possible direct effect of birth weight on childhood blood pressure : a sensitivity analysis.

To estimate the possible direct effect of birth weight on blood pressure, it is conventional to condition on the mediator, current weight. Such conditioning can induce bias. Our aim was to assess the potential biasing effect of U, an unmeasured common cause of current weight and blood pressure, on the estimate of the controlled direct effect of birth weight on blood pressure, with the help of sensitivity analyses. We used data from a school-based study conducted in Switzerland in 2005-2006 (n = 3,762; mean age = 12.3 years). A small negative association was observed between birth weight and systolic blood pressure (linear regression coefficient βbw = -0.3 mmHg/kg, 95% confidence interval: -0.9, 0.3). The association was strengthened upon adjustment for current weight (βbw|C = -1.5 mmHg/kg, 95% confidence interval: -2.1, -0.9). Sensitivity analyses revealed that the negative conditional association was explained by U only if U was relatively strongly associated with blood pressure and if there was a large difference in the prevalence of U between low-birth weight and normal-birth weight children. This weakens the hypothesis that the negative relationship between birth weight and blood pressure arises only from collider-stratification bias induced by conditioning on current weight.

Use of a Mendelian randomization approach to assess the causal relation of gamma-Glutamyltransferase with blood pressure and serum insulin levels.

Elevated levels of γ-glutamyltransferase (GGT) have been associated with elevated blood pressure (BP) and diabetes. However, the causality of these relations has not been addressed. The authors performed a cross-sectional analysis (2003-2006) among 4,360 participants from the population-based Cohorte Lausannoise (CoLaus) Study (Lausanne, Switzerland). The rs2017869 variant of the γ-glutamyltransferase 1 (GGT1) gene, which explained 1.6% of the variance in GGT levels, was used as an instrument for Mendelian randomization (MR). Sex-specific GGT quartiles were strongly associated with both systolic and diastolic BP (all P's < 0.0001). After multivariable adjustment, these relations were attenuated but remained significant. Using MR, the authors observed no positive association of GGT with BP (systolic: β -5.68, 95% confidence interval (CI): -11.51, 0.16 (P = 0.06); diastolic: β = -2.24, 95% CI: -5.98, 1.49 (P = 0.24)). The association of GGT with insulin was also attenuated after multivariable adjustment but persisted in the fully adjusted model (β = 0.07, 95% CI: 0.04, 0.09; P < 0.0001). Using MR, the authors also observed a positive association of GGT with insulin (β = 0.19, 95% CI: 0.01, 0.37; P = 0.04). In conclusion, the authors found evidence for a direct causal relation of GGT with fasting insulin but not with BP.

Assessing the impact of high-pressure processing on selected physical and biochemical attributes of white cabbage (Brassica oleracea L. var. capitata alba)

The aim of this study was to investigate the effect of combined pressure/temperature treatments (200, 400 and 600 MPa, at 20 and 40 °C) on key physical and chemical characteristics of white cabbage (Brassica oleracea L. var. capitata alba). Thermal treatment (blanching) was also investigated and compared with high-pressure processing (HPP). HPP at 400 MPa and 20–40 °C caused significantly larger colour changes compared to any other pressure or thermal treatment. All pressure treatments induced a softening effect, whereas blanching did not significantly alter texture. Both blanching and pressure treatments resulted in a reduction in the levels of ascorbic acid, effect that was less pronounced for blanching and HPP at 600 MPa and 20–40 °C. HPP at 600 MPa resulted in significantly higher total phenol content, total antioxidant capacity and total isothiocyanate content compared to blanching. In summary, the colour and texture of white cabbage were better preserved by blanching. However, HPP at 600 MPa resulted in significantly higher levels of phytochemical compounds. The results of this study suggest that HPP may represent an attractive technology to process vegetable-based food products that better maintains important aspects related to the content of health-promoting compounds. This may be of particular relevance to the food industry sector involved in the development of convenient novel food products with excellent functional properties

High pressure processing of swede (Brassica napus): Impact on quality properties

The effects of combined pressure/temperature treatments (200, 400 and 600 MPa, at 20 and 40 °C) on the physical and nutritional properties of swede roots (Brassica napus var. napobrassica) were assessed. Changes induced by high pressure processing (HPP) on the original properties of swede samples were compared with those produced by thermal treatment (blanching). All studied treatments altered the physical properties of swede, resulting in a loss of hardness and water binding capacity. The strongest alteration of texture was observed after HPP at 400 MPa, while 600 MPa was the treatment that better preserved the texture properties of swede. Blanching caused less total colour changes (ΔE) than HPP. Antioxidant properties of swede were measured as total antioxidant capacity, ascorbic acid and total phenol content. All treatments caused a loss of antioxidant capacity, which was less pronounced after HPP at 600 MPa and 20 °C and blanching. Four glucosinolates were detected in swede roots, glucoraphanin, progoitrin, glucobrassicanapin and glucobrassicin. Glucobrassicanapin and glucobrassicin contents were reduced with all studied treatments. Progoitrin content was not affected by blanching and HPP at 200 MPa. HPP at higher pressure levels (400 and 600 MPa), though, induced an increase of progoitrin levels. The results indicated that blanching and HPP at 600 MPa and 20 °C were the treatments that better preserved the original quality properties of swede.

Genome-wide association study identifies six new loci influencing pulse pressure and mean arterial pressure.

Numerous genetic loci have been associated with systolic blood pressure (SBP) and diastolic blood pressure (DBP) in Europeans. We now report genome-wide association studies of pulse pressure (PP) and mean arterial pressure (MAP). In discovery (N = 74,064) and follow-up studies (N = 48,607), we identified at genome-wide significance (P = 2.7 × 10(-8) to P = 2.3 × 10(-13)) four new PP loci (at 4q12 near CHIC2, 7q22.3 near PIK3CG, 8q24.12 in NOV and 11q24.3 near ADAMTS8), two new MAP loci (3p21.31 in MAP4 and 10q25.3 near ADRB1) and one locus associated with both of these traits (2q24.3 near FIGN) that has also recently been associated with SBP in east Asians. For three of the new PP loci, the estimated effect for SBP was opposite of that for DBP, in contrast to the majority of common SBP- and DBP-associated variants, which show concordant effects on both traits. These findings suggest new genetic pathways underlying blood pressure variation, some of which may differentially influence SBP and DBP.

Direct numerical simulations of interface dynamics to link capillary pressure and total surface energy

The flow of two immiscible fluids through a porous medium depends on the complex interplay between gravity, capillarity, and viscous forces. The interaction between these forces and the geometry of the medium gives rise to a variety of complex flow regimes that are difficult to describe using continuum models. Although a number of pore-scale models have been employed, a careful investigation of the macroscopic effects of pore-scale processes requires methods based on conservation principles in order to reduce the number of modeling assumptions. In this work we perform direct numerical simulations of drainage by solving Navier-Stokes equations in the pore space and employing the Volume Of Fluid (VOF) method to track the evolution of the fluid-fluid interface. After demonstrating that the method is able to deal with large viscosity contrasts and model the transition from stable flow to viscous fingering, we focus on the macroscopic capillary pressure and we compare different definitions of this quantity under quasi-static and dynamic conditions. We show that the difference between the intrinsic phase-average pressures, which is commonly used as definition of Darcy-scale capillary pressure, is subject to several limitations and it is not accurate in presence of viscous effects or trapping. In contrast, a definition based on the variation of the total surface energy provides an accurate estimate of the macroscopic capillary pressure. This definition, which links the capillary pressure to its physical origin, allows a better separation of viscous effects and does not depend on the presence of trapped fluid clusters.

Pressure Relief and Other Joint Rehabilitation Techniques, HR-1042, 1987

A study of four major concrete pavement joint rehabilitation techniques has been conducted, including: pressure relief joints, full-depth repairs, partial-depth repairs and joint resealing. The products of this research include the following for each technique: a summary of published research, detailed documentation of the design and performance of the 36 projects, conclusions and recommendations of the state highway engineers panel, "Design and Construction Guidelines" and "Guide Specifications." The latter two products are prepared for use by state highway agencies. The results of this study are based upon a review of literature, extensive field surveys and analysis of 36 rehabilitation projects, and the experience of an expert panel of state highway engineers.

Plastic Air Content versus Hardened Air Content by High Pressure Air Meter, MLR-99-03, 2001

Plastic air content is typically tested by the pressure method, ASTM C138. Loss of air content through the paver has been shown to exceed 2 percent at times. Research has shown that early deterioration of pavements in Iowa may be directly or indirectly related to low or inadequate air content. Hardened air content is typically checked using the linear traverse method, ASTM C457. The linear traverse method is very time consuming and could not be used on a production scale. A quick and effective method of testing in place air content is needed. Research has shown a high degree of correlation with the high-pressure method of determining air content of hardened concrete versus plastic air content in laboratory conditions. This research indicated that air contents are more variable when comparing core results to plastic air content, although the overall average for the air content was comparable. Perhaps, the location of the plastic air content test, obtained from construction records, versus location of the cores was not as accurate as needed.

High pressure induced changes in beef muscle proteome: correlation with quality parameters

The relationship between pressure induced changes on individual proteins and selected quality parameters in bovine longissimus thoracis et lumborum (LTL) muscle was studied. Pressures ranging from 200 to 600 MPa at 20 °C were used. High pressure processing (HPP) at pressures above 200 MPa induced strong modifications of protein solubility, meat colour and water holding capacity (WHC). The protein profiles of non-treated and pressure treated meat were observed using two dimensional electrophoresis. Proteins showing significant differences in abundance among treatments were identified by mass spectrometry. Pressure levels above 200 MPa strongly modified bovine LTL proteome with main effects being insolubilisation of sarcoplasmic proteins and solubilisation of myofibrillar proteins. Sarcoplasmic proteins were more susceptible to HPP effects than myofibrillar. Individual protein changes were significantly correlated with protein solubility, L*, b* and WHC, providing further insights into the mechanistic processes underlying HPP influence on quality and providing the basis for the future development of protein markers to assess the quality of processed meats.

Investigation of Improved Utility Cut Repair Techniques to Reduce Settlement in Repaired Areas, Phase II, TR-566, 2010

Trench maintenance problems are caused by improper backfill placement and construction procedures. This report is part of a multiphase research project that aims to improve long-term performance of utility cut restoration trenches. The goal of this research is to improve pavement patch life and reduce maintenance of the repaired areas. The objectives were to use field-testing data, laboratory-testing data, and long-term monitoring (elevation survey and falling weight deflectometer testing) to suggest and modify recommendations from Phase I and to identify the principles of trench subsurface settlement and load distribution in utility cut restoration areas by using instrumented trenches. The objectives were accomplished by monitoring local agency utility construction from Phase I, constructing and monitoring the recommended trenches from Phase I, and instrumenting trenches to monitor changes in temperature, pressure, moisture content, and settlement as a function of time to determine the influences of seasonal changes on the utility cut performance.

Increased salt sensitivity of ambulatory blood pressure in women with a history of severe preeclampsia.

Cardiovascular diseases are the principal cause of death in women in developed countries and are importantly promoted by hypertension. The salt sensitivity of blood pressure (BP) is considered as an important cardiovascular risk factor at any BP level. Preeclampsia is a hypertensive disorder of pregnancy that arises as a risk factor for cardiovascular diseases. This study measured the salt sensitivity of BP in women with a severe preeclampsia compared with women with no pregnancy hypertensive complications. Forty premenopausal women were recruited 10 years after delivery in a case-control study. Salt sensitivity was defined as an increase of >4 mm Hg in 24-hour ambulatory BP on a high-sodium diet. The ambulatory BP response to salt was significantly increased in women with a history of preeclampsia compared with that of controls. The mean (95% confidence interval) daytime systolic/diastolic BP increased significantly from 115 (109-118)/79 (76-82) mm Hg on low-salt diet to 123 (116-130)/80 (76-84) on a high-salt diet in women with preeclampsia, but not in the control group (from 111 [104-119]/77 [72-82] to 111 [106-116]/75 [72-79], respectively, P<0.05). The sodium sensitivity index (SSI=Δmean arterial pressure/Δurinary Na excretion×1000) was 51.2 (19.1-66.2) in women with preeclampsia and 6.6 (5.8-18.1) mm Hg/mol per day in controls (P=0.015). The nocturnal dip was blunted on a high-salt diet in women with preeclampsia. Our study shows that women who have developed preeclampsia are salt sensitive before their menopause, a finding that may contribute to their increased cardiovascular risk. Women with a history of severe preeclampsia should be targeted at an early stage for preventive measures of cardiovascular diseases.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa Volume III: Recommended Resistance Factors with Consideration of Construction Control and Setup, TR-584, 2012

The Federal Highway Administration (FHWA) mandated utilizing the Load and Resistance Factor Design (LRFD) approach for all new bridges initiated in the United States after October 1, 2007. As a result, there has been a progressive move among state Departments of Transportation (DOTs) toward an increased use of the LRFD in geotechnical design practices. For the above reasons, the Iowa Highway Research Board (IHRB) sponsored three research projects: TR-573, TR-583 and TR-584. The research information is summarized in the project web site (http://srg.cce.iastate.edu/lrfd/). Two reports of total four volumes have been published. Report volume I by Roling et al. (2010) described the development of a user-friendly and electronic database (PILOT). Report volume II by Ng et al. (2011) summarized the 10 full-scale field tests conducted throughout Iowa and data analyses. This report presents the development of regionally calibrated LRFD resistance factors for bridge pile foundations in Iowa based on reliability theory, focusing on the strength limit states and incorporating the construction control aspects and soil setup into the design process. The calibration framework was selected to follow the guidelines provided by the American Association of State Highway and Transportation Officials (AASHTO), taking into consideration the current local practices. The resistance factors were developed for general and in-house static analysis methods used for the design of pile foundations as well as for dynamic analysis methods and dynamic formulas used for construction control. The following notable benefits to the bridge foundation design were attained in this project: 1) comprehensive design tables and charts were developed to facilitate the implementation of the LRFD approach, ensuring uniform reliability and consistency in the design and construction processes of bridge pile foundations; 2) the results showed a substantial gain in the factored capacity compared to the 2008 AASHTO-LRFD recommendations; and 3) contribution to the existing knowledge, thereby advancing the foundation design and construction practices in Iowa and the nation.

Brachial or wrist blood pressure in obese patients : which is the best ?

RESUME L'obésité et l'hypertension atteignent des niveaux épidémiques aussi bien dans les pays industrialisés que dans ceux en voie de développement. La coexistence de ces deux pathologies est associée à un risque cardiovasculaire augmenté. Traditionnellement on mesure la pression artérielle (PA) au bras au moyen d'un brassard qui détermine la pression systolique et diastolique en utilisant soit la méthode auscultatoire ou oscillométrique. L'utilisation d'un brassard de taille standard chez le patient avec un tour de bras augmenté peut surestimer la pression artérielle. Il semble même qu'il existe un rapport idéal entre le tour de bras, et la taille du brassard La mesure à domicile de la pression artérielle avec des appareils validés donne des valeurs de la PA valables. Plusieurs appareils existent sur le marché et depuis quelques années les appareils de mesure de la PA au poignet font leur apparition sur le marché. Cette étude vise à comparer chez des sujets sains et obèses les valeurs de PA obtenues au poignet avec celles obtenues au bras en utilisant deux appareils validés l'OMRON HEM 705-CP et l'OMRON R6. L'OMRON HEM 705-CP permet l'utilisation soit d'un brassard standard (13x30 cm) ou d'un brassard large (16x38 cm), et l'OMRON R6 mesure la PA au poignet. Nous avons comparé un groupe de sujets obèses [Body Mass Index (BMI) >35kg/m2] avec un groupe de sujets sains (BMI <25kg/m2). Ont été exclues de l'étudé les personnes prenant un traitement antihypertenseur ainsi que celles souffrant d'arythmies. La PA a été mesurée en position assise avec le bras gauche sur une table à hauteur du coeur. Un brassard large a été employé pour les sujets obèses et un brassard standard pour les sujets sains. Trois mesures ont été effectuées, la première après une pause de 5 min et chacune des suivantes avec un intervalle de 2 min. La pression d'inflation maximale a été fixée à 170 mmHg. Nous avons utilisé la formule proposée par Marks LA et al pour déterminer si le rapport entre la taille des brassards fournis avec l'OMRON .HEM 705-CP et le tour de bras de nos sujets était optimal (taille du brassard = 9.34 x log10 taille du bras). Nos résultats ne montrent pas de différence statistiquement significative de la PA diastolique entre les deux groupes, qu'elle soit mesurée au bras ou au poignet. La PA systolique mesurée au bras s'est par contre avérée significativement plus basse chez les sujets obèses que chez les sujets sains. Aucune différence n'a été trouvée lorsque la mesure est effectuée au poignet. En utilisant la formule fournie par Marks le rapport entre taille du brassard (large chez les obèses) et tour de bras a été de 10.30±30 chez les sujets obèses et 9.630.45 chez les sujets sains (p<0.001). Le rapport entre tour de bras et brassard chez les sujets obèses est nettement au-dessus de la valeur optimale, ce qui suggère une possible sous-estimation de la PA systolique chez ces sujets. Ces résultats suggèrent qu'il existe un risque de sous-estimer la PA chez le patient obèse lors de l'utilisation d'un brassard large. Cette erreur pourrait être réduite par l'utilisation d'appareils de mesure au poignet. validés chez le sujet obèse.