Obtenção de Mo2C com adição de Co por reação gás-sólido em reator de leito fixo

Sulfur compounds emissions have been, on the late years, subject to more severe environmental laws due to its impact on the environment (causing the acid rain phenomena) and on human health. It has also been object of much attention from the refiners worldwide due to its relationship with equipment’s life, which is decreased by corrosion, and also with products’ quality, as the later may have its color, smell and stability altered by the presence of such compounds. Sulfur removal can be carried out by hydrotreating (HDT) which is a catalytic process. Catalysts for HDS are traditionally based on Co(Ni)-Mo(W)/Al2O3. However, in face of the increased contaminants’ content on crude oil, and stricter legislation on emissions, the development of new, more active and efficient catalysts is pressing. Carbides of refractory material have been identified as potential materials for this use. The addition of a second metal to carbides may enhance catalytic activities by increasing the density of active sites. In the present thesis Mo2C with Co addition was produced in a fixed bed reactor via gas-solid reaction of CH4 (5%) and H2(95%) with a precursor made of a mix of ammonium heptamolybdate [(NH4)6[Mo7O24].4H2O] and cobalt nitrate[Co(NO3)2.6H2O] at stoichiometric amounts. Precursors’ where analyzed by XRF, XRD, SEM and TG/DTA. Carboreduction reactions were carried out at 700 and 750°C with two cobalt compositions (2,5 and 5%). Reaction’s products were characterized by XRF, XRD, SEM, TOC, BET and laser granulometry. It was possible to obtain Mo2C with 2,5 and 5% cobalt addition as a single phase at 750°C with nanoscale crystallite sizes. At 700°C, however, both MoO2 and Mo2C phases were found by XRD. No Co containing phases were found by XRD. XRF, however, confirmed the intended Co content added. SEM images confirmed XRD data. The increase on Co content promoted a more severe agglomeration of the produced powder. The same effect was noted when the reaction temperature was increased. The powder synthesized at 750°C with 2,5% Co addition TOC analysis indicated the complete conversion from oxide material to carbide, with a 8,9% free carbon production. The powder produced at this temperature with 5% Co addition was only partially converted (86%)

Remoção de corantes utilizando tensoativos: extração por ponto de nuvem e floculação iônica

The textile sector is one of the main contributors to the generation of industrial wastewaters due to the use of large volumes of water, which has a high organic load content. In these, it is observed to the presence of dyes, surfactants, starch, alcohols, acetic acid and other constituents, from the various processing steps of the textiles. Hence, the treatment of textile wastewater becomes fundamental before releasing it into water bodies, where they can cause disastrous physical-chemical changes for the environment. Surfactants are substances widely used in separation processes and their use for treating textile wastewaters was evaluated in this research by applying the cloud point extraction and the ionic flocculation. In the cloud point extraction was used as surfactant nonylphenol with 9.5 ethoxylation degree to remove reactive dye. The process evaluation was performed in terms of temperature, surfactant and dye concentrations. The dye removal reached 91%. The ionic flocculation occurs due to the presence of calcium, which reacts with anionic surfactant to form insoluble surfactants capable of attracting the organic matter by adsorption. In this work the ionic flocculation using base soap was applied to the treatment of synthetic wastewater containing dyes belonging to three classes: direct, reactive, and disperse. It was evaluated by the influence of the following parameters: surfactant and electrolyte concentrations, stirring speed, equilibrium time, temperature, and pH. The flocculation of the surfactant was carried out in two ways: forming the floc in the effluent itself and forming the floc before mixing it to the effluent. Removal of reactive and direct dye, when the floc is formed into textile effluent was 97% and 87%, respectively. In the case where the floc is formed prior to adding it to the effluent, the removal to direct and disperse dye reached 92% and 87%, respectively. These results show the efficience of the evaluated processes for dye removal from textile wastewaters.

Desenvolvimento de material BaCexPr1-xO3 (0 ≤ X ≤ 1) com estrutura perovskita para oxidação catalítica do CO a CO2 em reator de leito fixo

Barium Cerate (BaCeO3) is perovskite type structure of ABO3, wherein A and B are metal cations. These materials, or doped, have been studied by having characteristics that make them promising for the application in fuel cells solid oxide, hydrogen and oxygen permeation, as catalysts, etc .. However, as the ceramic materials mixed conductivity have been produced by different synthesis methods, some conditions directly influence the final properties, one of the most important doping Site B, which may have direct influence on the crystallite size, which in turn directly influences their catalytic activity. In this study, perovskite-type (BaCexO3) had cerium gradually replaced by praseodymium to obtain ternary type materials BaCexPr1-xO3 and BaPrO3 binaries. These materials were synthesized by EDTA/Citrate complexing method and the material characterized via XRD, SEM and BET for the identification of their structure, morphology and surface area. Moreover were performed on all materials, catalytic test in a fixed bed reactor for the identification of that person responsible for complete conversion of CO to CO2 at low operating temperature, which step can be used as the subsequent production of synthesis gas (CO + H2) from methane oxidation. In the present work the crystalline phase having the orthorhombic structure was obtained for all compositions, with a morphology consisting of agglomerated particles being more pronounced with increasing praseodymium in the crystal structure. The average crystal size was between 100 nm and 142,2 nm. The surface areas were 2,62 m²g-1 for the BaCeO3 composition, 3,03 m²g-1 to BaCe0,5Pr0,5O3 composition and 2,37 m²g-1 to BaPrO3 composition. Regarding the catalytic tests, we can conclude that the optimal flow reactor operation was 50 ml / min and the composition regarding the maximum rate of conversion to the lowest temperature was BaCeO3 to 400° C. Meanwhile, there was found that the partially replaced by praseodymium, cerium, there was a decrease in the catalytic activity of the material.

Resumo de dissertações e teses: a estrutura composicional à luz da Análise Textual dos Discursos

This doctoral dissertationproposes the description, interpretation and analysis of the compositional structure of thesis and dissertation abstracts, with regard to the linguistic mechanisms that evidence text zones of different typological sequences, such as those of the text plan. Along these lines, the research problem was developed from the notion of compositional structure (sequences and text plans), as one of the levels or plans of text analysis, according to the theoretical framework proposed by Jean-Michel Adam (2011a). The main objective of this study was to recognize how the compositional structure, of thesis and dissertation abstracts, is achieved, with respect to text units and the global organization of this text category. The hypothesis posed in this research posits that specific informational text composition categories of abstracts are necessary to process the representation of the original text and the way in which it makes its meaning. Subsequently, this study is based on the theoretical and methodological framework of Text Linguistics (TL) and, above all, Textual Discourse Analysis (TDA), as we endeavor to understand the organizational structure of abstracts from both a linguistic and textual perspective. This structure involves the text plan of abstracts, with respect to their communicative purpose, i.e, the sharing of scientific information in its standard textual form. Thus, the development of this study, from a theoretical and methodological perspective, is based on the theoretical and descriptive premises from TDA (ADAM, 2011a, 2012; PASSEGGI et al., 2010), and also from TL (BEAUGRANDE; DRESSLER, (2012 [1981]); COSERIU; LAMAS (2010); MARCUSCHI, 2009 [1983]; FÁVERO; KOCH, 1994;KOCH, 2006; BENTES, 2004; BENTES; LEITE, 2010), within the field of text studies. The methodology of this study relies on empirical, documental research, which is qualitative, and adopts a descriptive and interpretive approach. From the empirical perspective, our objective is to understand the problems pertaining to the textual composition of abstracts, aiming to elucidate them in light of the theoretical and methodological framework previously mentioned. The corpus of the analysis is comprised of seven abstracts designated for systematic data collection. These texts, written between 2004 and 2011,were selected from Master’s theses and Doctoral dissertations in their electronic version, from the graduate program at the Federal University of Rio Grande do Norte. A thorough review of the literature reveals a clear fluctuation in the terminology of the concept, ‘abstract’. The results of the analysis revealed that the abstracts, which comprise the corpus of analysis in this study, in general, present typological heterogeneity, while the text plan remains fixed. Finally, the new knowledge gained in this research contributes both to the understanding of the compositional structure of abstracts as well as their production.

Um olhar sobre o patrimônio histórico-arquitetônico de Assú/RN: análise com base na percepção dos usuários e no ponto de vista técnico

This research analyzes the actual Historic-Architectural Heritage of Assú City which is located in Rio Grande do Norte State, Brazil, the study is based on both Assú s residents perception and technician s viewpoint. It looks forward to expose this community s relationship with the existing number of historic buildings, the scale of people s identity to the place and the association of this perception toward the preservation and conservation s scale of the historic settlement. Since the contextualization of the degradation s process of central areas, the study draw nea initially the conceptual aspects, focusing on the debate about heritage and the preservationist practice. The work complements the discussion through an approach on people-environment relationship and environmental perception, considering relevant factors for planning process. The obtained and presented data had diagnosed the condition of the architectural pile and also allowed this work to formulate recommendations for the studied area and architectural set in order to contribute for future urban politics implementation that consider the building, which are not only important to the considered population, but to the Rio Grande do Norte s History, as well

Características de cinzas e sua aplicação no tratamento de gases durante a gasificação de biomassa

Na procura de melhores combustíveis para a produção de energia térmica e energia elétrica, a biomassa apresenta-se como uma das fontes de energia renováveis menos prejudiciais ao meio ambiente, esta é considerada como um recurso neutro do ponto de vista de emissões de dióxido de carbono. Atualmente, a tecnologia predominante no domínio da conversão energética de biomassa por via termoquímica é a combustão. Contudo, verifica-se a procura de combustíveis de melhor qualidade produzidos a partir de biomassa, como por exemplo na forma gasosa (gás de combustível). A produção deste tipo de combustíveis gasosos envolvendo processos de gasificação carece do desenvolvimento de tecnologia que permita obter um gás combustível com características adequadas às utilizações pretendidas. Os problemas mais relevantes relacionados com a conversão termoquímica da biomassa incluem a produção de cinzas e de alcatrões, estes podem levar a vários problemas operatórios. O presente trabalho teve dois objetivos, a caracterização das cinzas resultantes do processo de combustão de biomassa e o estudo do efeito da aplicação das cinzas para melhorar as propriedades do gás produzido durante o processo de gasificação de biomassa, principalmente na redução de compostos condensáveis (alcatrões). As cinzas volantes da combustão de biomassa analisadas apresentam na sua constituição elementos químicos característicos da biomassa, onde o cálcio apresenta-se em concentrações mais elevadas. Em menores concentrações encontram-se sódio, magnésio, fósforo, enxofre, cloro, potássio, manganês e ferro. As cinzas de fundo, pelo contributo que a areia do leito tem, são caracterizadas por conterem grandes concentrações de silício. Durante os processos de gasificação de biomassa a concentração de compostos condensáveis diminuiu com o aumento da razão de equivalência. As cinzas, colocadas no reator de leito fixo, apresentam um efeito positivo sobre a qualidade do gás, nomeadamente um aumento de 47,8% no teor de H2 e de 11% de CO, consequentemente obteve-se um gás combustível com PCI (poder calorífico inferior) mais elevado.

Quitosana imobilizada em suporte inerte para a adsorção de corantes alimentícios em coluna de leito fixo

O uso de corantes sintéticos na indústria de alimentos tem provocado transtornos à saúde humana e ao meio ambiente. A quitosana pode ser imobilizada em matrizes sólidas e aplicada na remoção de corantes em coluna de leito fixo. A análise da dinâmica de uma coluna de leito fixo é baseada na curva de ruptura, esta é dependente da geometria da coluna, das condições operacionais e dos dados de equilíbrio. Neste contexto, o objetivo deste trabalho foi estudar o recobrimento de esferas de vidro por quitosana e sua aplicação como adsorvente de corantes em coluna de leito fixo. No estudo do recobrimento avaliaram-se os efeitos da concentração de quitosana e dos métodos de cura. As esferas recobertas foram aplicadas em ensaios de adsorção estático e dinâmico. Inicialmente, avaliou-se o equilíbrio de adsorção através da construção de isotermas e ajuste de modelos, e após, avaliaram-se os efeitos do tipo de cura e do grau de desacetilação da quitosana. Em seguida, foram analisados os efeitos do tipo de corante e do pH, e o comportamento cinético da adsorção pela construção de curvas de ruptura e ajuste de modelos dinâmicos. A influência da altura do leito e da concentração inicial de corante sobre os parâmetros da adsorção em leito fixo foram analisados através da metodologia de superfície de resposta (MSR). Ao final, estudou-se a regeneração da coluna. Os resultados mostraram que os maiores percentuais de recobrimento foram obtidos pelos métodos físico e físico/químico, na concentração de quitosana de 0,5% (m/v). Nestas condições o percentual de recobrimento foi de 46%. Nas imagens da superfície das esferas (MEV) observou-se que as mesmas foram recobertas de forma homogênea pela quitosana. As isotermas de equilíbrio obtidas foram classificadas como do tipo V, sendo o modelo de Sips o mais adequado para representar os dados experimentais. As capacidades máximas de adsorção foram 337 mg g-1, 286 mg g-1 e 200 mg g-1 para os corantes amarelo tartrazina, amarelo crepúsculo e vermelho 40, respectivamente. A aplicação das esferas recobertas com quitosana em leito fixo mostrou-se mais adequada utilizando o método de cura físico/químico e quitosana com grau de desacetilação de 85%. A máxima capacidade de adsorção da coluna em função do corante e do pH variou de 13 a 108 mg g–1. Os modelos BDST (bed–depth–service–time), Thomas e Yoon–Nelson foram adequados para representar os dados experimentais. De acordo com a MSR, o melhor desempenho do leito foi com altura de 30 cm e concentração inicial de corante de 50 mg L-1. Nestas condições, obteve-se tempo de ruptura de 88 min, máxima capacidade da coluna de 108 mg g-1 e remoção de 86 %. Na regeneração da coluna observou-se que cerca de 75% da capacidade máxima da coluna foi mantida após cinco ciclos de adsorção–eluição. Diante do exposto, a coluna de leito fixo empacotada com esferas recobertas com quitosana mostrou-se promissora na remoção de corantes de soluções aquosas.

Adsorção de cromo (VI) em leito fixo utilizando partículas de areia recobertas com Quitosana

Neste trabalho foi avaliado o processo de recobrimento de partículas de areia com quitosana utilizando a técnica dip-coating, e analisado o emprego destas partículas como recheio de uma coluna de leito fixo no processo de adsorção de cromo (VI) em solução aquosa. A quitosana foi obtida a partir de resíduos de camarão e caracterizada. O estudo avaliou a influência do tamanho das partículas e da concentração da solução de quitosana no recobrimento das partículas de areia. Foram avaliados parâmetros termodinâmicos, isotermas de equilíbrio e parâmetros relacionados ao funcionamento do leito (vazão e pH da solução, diâmetro de partícula) para o processo de adsorção de cromo (VI) em solução aquosa. No recobrimento das partículas de areia, o tamanho não teve significância na resposta, enquanto a concentração da solução de recobrimento mostrou ter grande influência sobre o resultado, sendo que a menor concentração de quitosana dentro da faixa estudada (0,5% p/v) apresentou o melhor desempenho. O processo de cura física para o recobrimento das partículas de areia mostrou melhor desempenho para a adsorção de cromo (VI) em leito fixo frente ao processo físico-químico. As análises de superfície (MEV) e de difração de raio-X (EDX) comprovaram a mudança na superfície das partículas recobertas e a presença de cromo após a adsorção. O modelo de Sips foi o que melhor representou os dados experimentais de equilíbrio, com R2 >0,99% e EMR<3,5%, sendo que a capacidade máxima de adsorção foi de 46,93 mg g-1 obtida a 298 K. O processo se mostrou espontâneo, exotérmico e favorável, com valores de -4,49 a -4,66kJ mol-1 para e energia livre de Gibbs, -5,97kJ mol-1 para a variação de entalpia e -5,17x10-3 kJ mol-1K -1 para variação de entropia. O aumento do pH diminuiu a adsorção de cromo (VI), sendo que a melhor resposta foi obtida em pH 3, sendo que o diâmetro de partícula não teve efeito significante. O estudo da vazão da solução de cromo (VI) no desempenho do leito mostrou que no menor valor (2,5 mL min-1 ) a concentração de saída do leito foi próxima a zero, mantendo-se com concentrações de saída abaixo de 20% por pelo menos 20 min. O estudo da dessorção do leito mostrou que após cinco ciclos de trabalho o leito manteve 86% da capacidade de adsorção, com taxas de recuperação do cromo no processo de dessorção maiores que 95%.

Avaliação da qualidade higiénica de produtos de charcutaria fatiados no ponto de venda

Objetivo: Avaliar em talhos a qualidade microbiológica de produtos de charcutaria, vendidos fatiados no local no que respeita a indicadores de higiene, indicadores de segurança e de alteração.

The Ponto-Caspian basin as a final trap for southeastern Scandinavian Ice-Sheet meltwater

This paper provides new data on the evolution of the Caspian Sea and Black Sea from the Last Glacial Maximum until ca. 12 cal kyr BP. We present new analyses (clay mineralogy, grain-size, Nd isotopes and pollen) applied to sediments from the river terraces in the lower Volga, from the middle Caspian Sea and from the western part of the Black Sea. The results show that during the last deglaciation, the Ponto-Caspian basin collected meltwater and fine-grained sediment from the southern margin of the Scandinavian Ice Sheet (SIS) via the Dniepr and Volga Rivers. It induced the deposition of characteristic red-brownish/chocolate-coloured illite-rich sediments (Red Layers in the Black Sea and Chocolate Clays in the Caspian Sea) that originated from the Baltic Shield area according to Nd data. This general evolution, common to both seas was nevertheless differentiated over time due to the specificities of their catchment areas and due to the movement of the southern margin of the SIS. Our results indicate that in the eastern part of the East European Plain, the meltwater from the SIS margin supplied the Caspian Sea during the deglaciation until ∼13.8 cal kyr BP, and possibly from the LGM. That led to the Early Khvalynian transgressive stage(s) and Chocolate Clays deposition in the now-emerged northern flat part of the Caspian Sea (river terraces in the modern lower Volga) and in its middle basin. In the western part of the East European Plain, our results confirm the release of meltwater from the SIS margin into the Black Sea that occurred between 17.2 and 15.7 cal kyr BP, as previously proposed. Indeed, recent findings concerning the evolution of the southern margin of the SIS and the Black Sea, show that during the last deglaciation, occurred a westward release of meltwater into the North Atlantic (between ca. 20 and 16.7 cal kyr BP), and a southward one into the Black Sea (between 17.2 and 15.7 cal kyr BP). After the Red Layers/Chocolate Clays deposition in both seas and until 12 cal kyr BP, smectite became the dominant clay mineral. The East European Plain is clearly identified as the source for smectite in the Caspian Sea sediments. In the Black Sea, smectite originated either from the East European Plain or from the Danube River catchment. Previous studies consider smectite as being only of Anatolian origin. However, our results highlight both, the European source for smectite and the impact of this source on the depositional environment of the Black Sea during considered period.

Um olhar sobre o patrimônio histórico-arquitetônico de Assú/RN: análise com base na percepção dos usuários e no ponto de vista técnico

This research analyzes the actual Historic-Architectural Heritage of Assú City which is located in Rio Grande do Norte State, Brazil, the study is based on both Assú s residents perception and technician s viewpoint. It looks forward to expose this community s relationship with the existing number of historic buildings, the scale of people s identity to the place and the association of this perception toward the preservation and conservation s scale of the historic settlement. Since the contextualization of the degradation s process of central areas, the study draw nea initially the conceptual aspects, focusing on the debate about heritage and the preservationist practice. The work complements the discussion through an approach on people-environment relationship and environmental perception, considering relevant factors for planning process. The obtained and presented data had diagnosed the condition of the architectural pile and also allowed this work to formulate recommendations for the studied area and architectural set in order to contribute for future urban politics implementation that consider the building, which are not only important to the considered population, but to the Rio Grande do Norte s History, as well

A amortização do capital fixo e o investimento da empresa

Doutoramento em Finanças

A relação entre as famílias e os adultos institucionalizados: um projeto no centro de dia “O Pontão”

Dissertação de Mestrado, Educação Social, Escola Superior de Educação e Comunicação, Universidade do Algarve, 2015

Estudo comparativo entre eletrodo fixo e eletrodo móvel (caneta) no fortalecimento perineal

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências Médicas, Programa de Pós-Graduação em Ciências Médicas, 2011.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry