Developing a Service-Oriented Software Platform

Tehokkaasti toimiva sähköinen tiedonvälitys yrityksen omien sovellusten välillä sekä sen liikekumppaneiden kanssa on kasvanut merkittäväksi yrityksen kilpailukykyä lisääväksi tekijäksi. Yritysten erilaiset tietojärjestelmät asettavat haasteita tehokkaalle tiedonvälitykselle näiden järjestelmien välillä. Perinteiset EDI teknologioihin perustuvat sähköisen tiedonvälityksen ratkaisut eivät pysty mukautumaan nykyisin nopeasti muuttuviin markkinatilanteisiin. Palvelukeskeiseen arkkitehtuuriin ja Web-palveluihin perustuvat teknologiat mahdollistavat mukautumisen erilaisiin muutoksiin liiketoiminnassa nopeammin ja helpommin. Lisäksi ne nopeuttavat tiedon integrointia erilaisten tietojärjestelmien välillä, koska tiedonvälityksessä käytetään yleisesti hyväksyttyihin standardeihin perustuvia tiedonsiirtoprotokollia sekä tietoformaatteja. Diplomityössä esitellään keskeiset teknologiat ja menetelmät sähköisen tiedonvälityksen toteuttamiseen. Lisäksi työssä vertaillaan erilaisia vaihtoehtoja, joilla sähköinen tiedonvälitys voidaan toteuttaa. Vaihtoehtoina työssä ovat tiedonvälityspalveluiden ostaminen toiselta yritykseltä, olemassa olevan valmiin ohjelmiston hyödyntäminen, tai kokonaan uuden sovellusalustan kehittäminen. Työssä kuvaillaan palvelukeskeisen sovellusalustan toteutus, joka mahdollistaa tehokkaan sekä joustavan tiedonvälityksen sovellusten välillä. Alustan tarjoamien palveluiden päälle voidaan rakentaa erilaisia liiketoimintaa tukevia palveluita, jotka voivat hyödyntää sovellusalustan tarjoamia toiminnallisuuksia. Alustan toteutusta arvioidaan kolmen liiketoimintaskenaarion toteutuksesta saatujen kokemusten perusteella.

Managing the Front End of Innovation in a Networked Company Environment - Combining Strategy, Processes and Systems of Innovation

The objective of the thesis is to enhance the understanding about the management of the front end phases of the innovation process in a networked environment. The thesis approaches the front end of innovation from three perspectives, including the strategy, processes and systems of innovation. The purpose of the use of different perspectives in the thesis is that of providing an extensive systemic view of the front end, and uncovering the complex nature of innovation management. The context of the research is the networked operating environment of firms. The unit of analysis is the firm itself or its innovation processes, which means that this research approaches the innovation networks from the point of view of a firm. The strategy perspective of the thesis emphasises the importance of purposeful innovation management, the innovation strategy of firms. The role of innovation processes is critical in carrying out innovation strategies in practice, supporting the development of organizational routines for innovation, and driving the strategic renewal of companies. The primary focus of the thesis from systems perspective is on idea management systems, which are defined as a part of innovation management systems, and defined for this thesis as any working combination of methodology and tools (manual or IT-supported) that enhance the management of innovations within their early phases. The main contribution of the thesis are the managerial frameworks developed for managing the front end of innovation, which purposefully “wire” the front end of innovation into the strategy and business processes of a firm. The thesis contributes to modern innovation management by connecting the internal and external collaboration networks as foundational elements for successful management of the early phases of innovation processes in a dynamic environment. The innovation capability of a firm is largely defined by its ability to rely on and make use of internal and external collaboration already during the front end activities, which by definition include opportunity identification and analysis, idea generation, profileration and selection, and concept definition. More specifically, coordination of the interfaces between these activities, and between the internal and external innovation environments of a firm is emphasised. The role of information systems, in particular idea management systems, is to support and delineate the innovation-oriented behaviour and interaction of individuals and organizations during front end activities. The findings and frameworks developed in the thesis can be used by companies for purposeful promotion of their front end processes. The thesis provides a systemic strategy framework for managing the front end of innovation – not as a separate process, but as an elemental bundle ofactivities that is closely linked to the overall innovation process and strategy of a firm in a distributed environment. The theoretical contribution of the thesis relies on the advancement of the open innovation paradigm in the strategic context of a firm within its internal and external innovation environments. This thesis applies the constructive research approach and case study methodology to provide theoretically significant results, which are also practically beneficial.

Unsupervised visual object categorization

The number of digital images has been increasing exponentially in the last few years. People have problems managing their image collections and finding a specific image. An automatic image categorization system could help them to manage images and find specific images. In this thesis, an unsupervised visual object categorization system was implemented to categorize a set of unknown images. The system is unsupervised, and hence, it does not need known images to train the system which needs to be manually obtained. Therefore, the number of possible categories and images can be huge. The system implemented in the thesis extracts local features from the images. These local features are used to build a codebook. The local features and the codebook are then used to generate a feature vector for an image. Images are categorized based on the feature vectors. The system is able to categorize any given set of images based on the visual appearance of the images. Images that have similar image regions are grouped together in the same category. Thus, for example, images which contain cars are assigned to the same cluster. The unsupervised visual object categorization system can be used in many situations, e.g., in an Internet search engine. The system can categorize images for a user, and the user can then easily find a specific type of image.

Palveluväylää hyödyntävät järjestelmäintegraatiot

Tässä työssä kuvataan Lahti Fenix Kuntalaistilijärjestelmän ja Tekla Xcity-järjestelmän välille toteutetun järjestelmäintegraation eri vaiheet. Kuntalaistilijärjestelmä on Lahden kaupungin Fenix-hankkeessa kehitteillä oleva sähköinen palvelualusta, jota pitkin kuntalaisille tarjotaan erilaisia kunnallisia palveluja, kuten vastaanottoaikoja hammaslääkärille. Tekla Xcity on kuntien ja kaupunkien käyttöön tarkoitettu järjestelmä, josta on mahdollista hakea esimerkiksi henkilö- ja paikkatietoja. Aluksi työssä esitellään lyhyesti erilaisia tapoja toteuttaa järjestelmäintegraatioita. Seuraavaksi kiinnitetään erityistä huomiota niin sanottuihin web-palveluihin, joiden etuja ja haittoja arvioidaan käytännön esimerkin kautta. Tässä pidetään viitekehyksenä Kuntalaistilijärjestelmää ja siinä käytettyä palvelukeskeistä arkkitehtuuria. Arkkitehtuurin ja viestiliikenneratkaisujen arvioinnin jälkeen siirrytään käytännön osuuteen, jossa itse järjestelmäintegraatio toteutetaan. Järjestelmäintegraatio toteutetaan käyttäen avoimen lähdekoodin palveluväylää ja sille saatavissa olevia viestintäkehyksiä. Integraation eri vaiheissa tutustutaan erilaisiin viestiliikenneprotokolliin ja niiden käyttöön valittujen viestintäkehysten kanssa. Kunkin protokollan toimivuus varmennetaan analysoimalla integraatioon liittyvien komponenttien ja päätepisteiden välistä tietoliikennettä.

Piensarjatuotannon hitsauksen robotisointi

Diplomityön tarkoituksena on selvittää hitsauksen robotisointimahdollisuudet vakiintuneelle piensarjatuotteelle. Tarkastelun kohteeksi valittiin maanpäällisen porausyksikön runkopari, joka rakentuu ylä- ja alarungosta. Hitsaus on nykytilanteessa käsinhitsausta ja tuotetta tehdään noin 300 kpl / vuosi. Hitsauksen robotisoinnilla halutaan aikaansaada kustannussäästöä hitsauksen osalta ja tuotantokapasiteetin nousua. Työn teoriaosa voidaan jakaa neljään osaan: hitsaustekniikka, robottihitsattava tuote, robotisoituhitsaus ja investointilaskelmat. Hitsaustekniikassa lähdetään liikkeelle hitsauksen kannalta oleellisimmista perusasioista, jolloin lukijalle syntyy laajempi kokonaiskuva asiasta. Hitsauksen robotisointia suunniteltaessa korostuu tuotteen hitsattavuus. Hyvin suunniteltu tuote mahdollistaa robotisoidun hitsauksen ja luo edellytykset laadukkaalle, taloudelliselle ja tuottavalle hitsaukselle. Robotisoidun hitsauksen osassa rakennetaan kokonaisuus, jolloin lopputuloksena on tehokas robottijärjestelmä. Samalla käsitellään sekä varsinaista hitsausteknistä toteutusta että robottijärjestelmän komponentteja. Investointilaskelmien avulla varmistetaan robottijärjestelmän ja koko tuotantoketjun kannattavuus. Käytännön osuudessa selvitetään robotisoidun hitsauksen mahdollisuudet valitulle tuotteelle ja robotisoinnin aikaansaamat kustannussäästöt. Tuotteen ylärungosta valitaan etuosa tarkempaa CASE tyylistä tarkastelua varten. CASE:ssa käydään läpi etuosan valmistettavuus ja selvitetään robotisoinnista aikaansaamat säästöt. Investointilaskelmien avulla selvitetään käytännön osuudessa robotisoidun hitsauksen kannattavuus tietyille robottijärjestelmille.

Visualitzador de molècules d'ADN per laboratori virtual

Com a continuació del treball de final de carrera “Desenvolupament d’un laboratori virtual per a les pràctiques de Biologia Molecular” de Jordi Romero, s’ha realitzat una eina complementaria per a la visualització de molècules integrada en el propi laboratori virtual. Es tracta d’una eina per a la visualització gràfica de gens, ORF, marques i seqüències de restricció de molècules reals o fictícies. El fet de poder treballar amb molècules fictícies és la gran avantatge respecte a les solucions com GENBANK que només permet treballar amb molècules pròpies. Treballar amb molècules fictícies fa que sigui una solució ideal per a l’ensenyament, ja que dóna la possibilitat als professors de realitzar exercicis o demostracions amb molècules reals o dissenyades expressament per a l’exercici a demostrar. A més, permet mostrar de forma visual les diferents parts simultàniament o per separat, de manera que ofereix una primera aproximació interpretació dels resultats. Per altra banda, permet marcar gens, crear marques, localitzar seqüències de restricció i generar els ORF de la molècula que nosaltres creem o modificar una ja existent. Per l’implementació, s’ha continuat amb l’idea de separar la part de codi i la part de disseny en les aplicacions Flash. Per fer-ho, s’ha utilitzat la plataforma de codi lliure Ariware ARPv2.02 que proposa un marc de desenvolupament d’aplicacions Flash orientades a objectes amb el codi (classes ActionScript 2.0) separats del movieclip. Per al processament de dades s’ha fet servir Perl per ser altament utilitzat en Bioinformàtica i per velocitat de càlcul. Les dades generades es guarden en una Base de Dades en MYSQL (de lliure distribució), de la que s’extreuen les dades per generar fitxers XML, fent servir tant PHP com la plataforma AMFPHP com a enllaç entre Flash i la resta de parts.

Cobalt electrodeposition onto highly oriented pyrolytic graphite (HOPG) electrode from ammonium sulfate solutions

It was carried out an electrochemical study of the cobalt electrodeposition onto HOPG electrode from an aqueous solution containing 10-2 M of CoSO4 + 1M (NH4)2SO4. Nucleation parameters such as nucleation rate, density of active nucleation sites, saturation nucleus and the rate constant of the proton reduction reaction (kPR) were determined from potentiostatic studies. An increase in kPR values with the decrease in the applied potential suggested a competition between H+ and Co2+ by the active sites on the surface. The ΔG energy calculated for the formation of stable nucleus was 8.21x10-21 J/nuclei. The AFM study indicated the formation of small clusters of 50-400 nm in diameter and 2-120 nm in height.

Copper electrodeposition on glassy carbon and highly oriented pyrolytic graphite substrates from perchlorate solutions

In present work, we analyzed the copper electrodeposition onto GCE (System I) and HOPGE (System II) from perchlorate solutions. The current density transients obtained from system I and II were well described through a kinetic mechanism that involves four different contributions: (a) a Langmuir type adsorption process, b) an electron transfer from Cu2+→Cu+, (c) a 3D nucleation limited by a mass transfer reaction and (d) a proton reduction process. It was observed that the values of the nucleation rate, the number of active nucleation sites were increased with the overpotential and they are bigger onto GCE in comparison with HOPGE.

Agile CRM System Implementation Project

The application of information technology (IT) in customer relationship management (CRM) is growing rapidly as many companies implement CRM systems to support their numerous customer facing activities. However, failure rates of CRM projects remain notably high as they deliver scant solutions and poor user acceptance. As a consequence, it is justified to study previously researched CRM success factors and apply them to CRM system implementation. The aim of this master’s thesis was to get acquainted with relevant academic theories, frameworks and practices concerning CRM and agile development, and use them to generate a modified CRM project strategy to support the successful execution of the case company’s, Process Vision Oy, CRM implementation project. The empirical CRM system implementation project was conducted simultaneously with writing this thesis. Its theoretical findings could be transferred into practice through active participation in the CRM system development and deployment work. The project’s main goal was to produce and take into use a functioning CRM system. The goal was met, since at the time of printing this thesis the first system release was successfully published to its users at Process Vision’s marketing and sales departments. The key success elements in the CRM project were cyclic, iterative system development, customer oriented approach, user inclusion and flexible project management. Implying agile development practices ensured being able to quickly respond to changes arising during the progress of the CRM project. Throughout modelling of the core sales process formed a strong basis, on which the CRM system’s operational and analytical functionalities were built. End users were included in the initial specification of system requirements and they provided feedback on the system’s usage. To conclude, the chosen theoretical CRM roadmaps and agile development practices proved as beneficial in the successful planning and execution of the agile CRM system implementation project at Process Vision.

Modeling and developing a customer-oriented configuration process in a mass customization environment

In this thesis the main objective is to examine and model configuration system and related processes. When and where configuration information is created in product development process and how it is utilized in order-delivery process? These two processes are the essential part of the whole configuration system from the information point of view. Empirical part of the work was done as a constructive research inside a company that follows a mass customization approach. Data models and documentation are created for different development stages of the configuration system. A base data model already existed for new structures and relations between these structures. This model was used as the basis for the later data modeling work. Data models include different data structures, their key objects and attributes, and relations between. Representation of configuration rules for the to-be configuration system was defined as one of the key focus point. Further, it is examined how the customer needs and requirements information can be integrated into the product development process. Requirements hierarchy and classification system is presented. It is shown how individual requirement specifications can be connected for physical design structure via features by developing the existing base data model further.

Hume, liberty and the object of moral evaluation

Hume's project concerning the conflict between liberty and necessity is ";reconciliatory";. But what is the nature of Hume's project? Does he solve a problem in metaphysics only? And when Hume says that the dispute between the doctrines of liberty and necessity is merely verbal, does he mean that there is no genuine metaphysical dispute between the doctrines? In the present essay I argue for: (1) there is room for liberty in Hume's philosophy, and not only because the position is pro forma compatibilist, even though this has importance for the recognition that Hume's main concern when discussing the matter is with practice; (2) the position does not involve a ";subjectivization"; of every form of necessity: it is not compatibilist because it creates a space for the claim that the operations of the will are non-problematically necessary through a weakning of the notion of necessity as it applies to external objects; (3) Hume holds that the ordinary phenomena of mental causation do not preempt the atribuition of moral responsibility, which combines perfectly with his identification of the object of moral evaluation: the whole of the character of a person, in relation to which there is, nonetheless, liberty. I intend to support my assertions by a close reading of what Hume states in section 8 of the first Enquiry.

On the development of object functions and restrictions for shapes made with a turret punch press

This study presents the information required to describe the machine and device resources in the turret punch press environment which are needed for the development of the analysing method for automated production. The description of product and device resources and their interconnectedness is the starting point for method comparison the development of expenses, production planning and the performance of optimisation. The manufacturing method cannot be optimized unless the variables and their interdependence are known. Sheet metal parts in particular may then become remarkably complex, and their automatic manufacture may be difficult or, with some automatic equipment, even impossible if not know manufacturing properties. This thesis consists of three main elements, which constitute the triangulation. In the first phase of triangulation, the manufacture occuring on a turret punch press is examined in order to find the factors that affect the efficiency of production. In the second phase of triangulation, the manufacturability of products on turret punch presses is examined through a set of laboratory tests. The third phase oftriangulation involves an examination of five industry parts. The main key findings of this study are: all possible efficiency in high automation level machining cannot be achieved unless the raw materials used in production and the dependencies of the machine and tools are well known. Machine-specific manufacturability factors for turret punch presses were not taken into account in the industrial case samples. On the grounds of the performed tests and industrial case samples, the designer of a sheet metal product can directly influence the machining time, material loss, energy consumption and the number of tools required on a turret punch press by making decisions in the way presented in the hypothesis of thisstudy. The sheet metal parts to be produced can be optimised to bemanufactured on a turret punch press when the material to be used and the kinds of machine and tool options available are known. This provides in-depth knowledge of the machine and tool properties machine and tool-specifically. None of the optimisation starting points described here is a separate entity; instead, they are all connected to each other.

Comparison of Local Feature Detectors and Descriptors for Visual Object Categorization

Local features are used in many computer vision tasks including visual object categorization, content-based image retrieval and object recognition to mention a few. Local features are points, blobs or regions in images that are extracted using a local feature detector. To make use of extracted local features the localized interest points are described using a local feature descriptor. A descriptor histogram vector is a compact representation of an image and can be used for searching and matching images in databases. In this thesis the performance of local feature detectors and descriptors is evaluated for object class detection task. Features are extracted from image samples belonging to several object classes. Matching features are then searched using random image pairs of a same class. The goal of this thesis is to find out what are the best detector and descriptor methods for such task in terms of detector repeatability and descriptor matching rate.

Carnap and Kuhn on linguistic frameworks and scientific revolutions

Several recent works in history and philosophy of science have re-evaluated the alleged opposition between the theses put forth by logical empiricists such as Carnap and the so-called "post-positivists", such as Kuhn. Although the latter came to be viewed as having seriously challenged the logical positivist views of science, recent authors (e.g., Friedman, Reisch, Earman, Irzik and Grünberg) maintain that some of the most notable theses of the Kuhnian view of science have striking similarities with some aspects of Carnap's philosophy. Against that reading, Oliveira and Psillos argue that within Carnap's philosophy there is no place for the Kuhnian theses of incommensurability, holism, and theory-ladenness of observations. This paper presents each of those readings and argues that Carnap and Kuhn have non-opposing views on holism, incommensurability, the theory-ladenness of observations, and scientific revolutions. We note at the very end - without dwelling on the point, however - that they come apart on other matters, such as their views on metaphysics and on the context of discovery/justification distinction.

Solving the puzzle of mobile learning adoption

The dissertation seeks to explore how to improve users‘ adoption of mobile learning in current education systems. Considering the difference between basic and tertiary education in China, the research consists of two separate but interrelated parts, which focus on the use of mobile learning in basic and tertiary education contexts, respectively. In the dissertation, two adoption frameworks are developed based on previous studies. The frameworks are then evaluated using different technologies. Concerning mobile learning use in basic education settings, case study methodology is utilized. A leading provider of mobile learning services and products in China, Noah Ltd., is investigated. Multiple sources of evidence are collected to test the framework. Regarding mobile learning adoption in tertiary education contexts, survey research methodology is utilized. Based on 209 useful responses, the framework is evaluated using structural equation modelling technology. Four proposed determinants of intention to use are evaluated, which are perceived ease of use, perceived near-term usefulness, perceived ong-term usefulness and personal innovativeness. The dissertation provides a number of new insights for both researchers and practitioners. In particular, the dissertation specifies a practical solution to deal with the disruptive effects of mobile learning in basic education, which keeps the use of mobile learning away from the schools across such as European countries. A list of new and innovative mobile learning technologies is systematically introduced as well. Further, the research identifies several key factors driving mobile learning adoption in tertiary education settings. In theory, the dissertation suggests that since the technology acceptance model is initiated in work-oriented innovations by testing employees, it is not necessarily the best model for studying educational innovations. The results also suggest that perceived longterm usefulness for educational systems should be as important as perceived usefulness for utilitarian systems, and perceived enjoyment for hedonic systems. A classification based on the nature of systems purpose (utilitarian, hedonic or educational) would contribute to a better understanding of the essence of IT innovation adoption.