En jämförelse av molnbaserade realtidsanalystjänster : Skillnader i användbarhet mellan multi-tenant och single-tenant arkitekturer

Internet of Things är ett samlingsbegrepp för den utveckling som innebär att olika typer av enheter kan förses med sensorer och datachip som är uppkopplade mot internet. En ökad mängd data innebär en ökad förfrågan på lösningar som kan lagra, spåra, analysera och bearbeta data. Ett sätt att möta denna förfrågan är att använda sig av molnbaserade realtidsanalystjänster. Multi-tenant och single-tenant är två typer av arkitekturer för molnbaserade realtidsanalystjänster som kan användas för att lösa problemen med hanteringen av de ökade datamängderna. Dessa arkitekturer skiljer sig åt när det gäller komplexitet i utvecklingen. I detta arbete representerar Azure Stream Analytics en multi-tenant arkitektur och HDInsight/Storm representerar en single-tenant arkitektur. För att kunna göra en jämförelse av molnbaserade realtidsanalystjänster med olika arkitekturer, har vi valt att använda oss av användbarhetskriterierna: effektivitet, ändamålsenlighet och användarnöjdhet. Vi kom fram till att vi ville ha svar på följande frågor relaterade till ovannämnda tre användbarhetskriterier: • Vilka likheter och skillnader kan vi se i utvecklingstider? • Kan vi identifiera skillnader i funktionalitet? • Hur upplever utvecklare de olika analystjänsterna? Vi har använt en design and creation strategi för att utveckla två Proof of Concept prototyper och samlat in data genom att använda flera datainsamlingsmetoder. Proof of Concept prototyperna inkluderade två artefakter, en för Azure Stream Analytics och en för HDInsight/Storm. Vi utvärderade dessa genom att utföra fem olika scenarier som var för sig hade 2-5 delmål. Vi simulerade strömmande data genom att låta en applikation kontinuerligt slumpa fram data som vi analyserade med hjälp av de två realtidsanalystjänsterna. Vi har använt oss av observationer för att dokumentera hur vi arbetade med utvecklingen av analystjänsterna samt för att mäta utvecklingstider och identifiera skillnader i funktionalitet. Vi har även använt oss av frågeformulär för att ta reda på vad användare tyckte om analystjänsterna. Vi kom fram till att Azure Stream Analytics initialt var mer användbart än HDInsight/Storm men att skillnaderna minskade efter hand. Azure Stream Analytics var lättare att arbeta med vid simplare analyser medan HDInsight/Storm hade ett bredare val av funktionalitet.

A Modular and digitally programmable interface based on band-pass sigma-delta modulator for mixed-signal systems-on-chip

The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.

Megaeventos esportivos: impactos no turismo das cidades sedes.

O presente trabalho visa ilustrar a importância de se analisar os impactos de um megaevento esportivo, como a Copa do Mundo, no turismo do destino sede. A escolha do tema se dá pelo fato de iniciativas como essas terem se tornadas estratégicas nos últimos anos e muito disputadas por governos em todo o mundo. O motivo da escolha do tema se dá especialmente pelo fato do Brasil sediar, em curto espaço de tempo, dois dos principais megaeventos esportivos internacionais: a Copa do Mundo, em 2014, e os Jogos Olímpicos, em 2016. O trabalho, composto por 8 capítulos procura, com base no referencial teórico, identificar os principais impactos dos megaeventos no segmento de turismo do destino sede. Para se atingir este objetivo, utilizou-se o modelo de avaliação proposto por Allen et al (2003), cientista internacional referencia nessa área de estudo. Dentre os possíveis impactos positivos engloba-se a promoção do destino e incremento do turismo, o aumento do tempo de permanência do turista, a lucratividade para o setor, o aumento da renda de impostos, a oportunidade de negócios, investimento em infra-estrutura no destino, a atividade comercial e a geração de empregos pela realização do evento. Por outro lado, dentre os impactos negativos, destacam-se a resistência da comunidade ao turismo, a perda de autenticidade e danos à reputação do destino, exploração, preços inflacionados, custos de oportunidade, má gestão financeira, perda financeira, dentre outros. O método de pesquisa, baseado em Yin (2005), foi o estudo de caso baseado nos dois eventos mais recentes de Copa do Mundo: Alemanha (2006) e África do Sul (2010). O estudo teve um viés qualitativo e os instrumentos de coleta de dados foram diferenciados em cada uma das etapas da pesquisa, englobando pesquisa a dados primários e secundários, consulta à relatórios oficiais e principalmente a consulta a artigos acadêmicos de renomados autores internacionais especialistas em eventos. Foram também consultadas pesquisas de renomadas instituições, tais como Organização Mundial do Turismo OMT (2006), Fundação Getulio Vargas (FGV, 2009), FIPE (2005), EMBRATUR e Ministério do Turismo (MTUR), entre outras. Os resultados demonstram que os megaeventos geram oportunidades para o destino sede - de curto, médio e longo prazo - para os diferentes segmentos, em especial para o turismo de eventos e esportivo, seja no âmbito nacional ou internacional. Também observa-se a importância das ações de melhoria não serem pontuais, para que justifiquem o próprio legado do evento em pauta. Por outro lado, verifica-se a importância de se realizar ações que visem mitigar os impactos negativos inerentes a megaeventos, a fim de não se comprometer o turismo do destino ou pais sede, sua reputação, seus cofres públicos e sua comunidade.

Internationalization of SME and entry mode choice in Brazil: the case study of Ameco, a French SME

O objetivo da pesquisa é analisar, para uma PME francesa, a atratividade de dois mercados-alvo no Brasil, a fim de apoiar a tomada de decisão do CEO sobre o investimento futuro. Para enfrentar a crise da União Europeia, muitas PMEs francesas estão procurando novas oportunidades em todo o mundo, especialmente nos países BRIC. Na verdade, o Brasil parece ser um mercado promissor, oferecendo inúmeras oportunidades de crescimento. No entanto, em comparação com as empresas multinacionais tradicionais, as PMEs têm de lidar com a falta de recursos e de poder de mercado. Ir global é arriscado e caro para as PMEs; o que implica avaliar cuidadosamente a viabilidade da implementação de um investimento estrangeiro. A análise revelou que o Brasil é um mercado de aproximadamente 30 milhões de euros, nos próximos 10 anos. Este é definitivamente um mercado promissor para uma empresa como AMECO. Levando em conta esses critérios, AMECO deve abrir um escritório de representação no próximo ano para angariar novos clientes e assinar novos contratos.

The influence of the supply chain agents on the new product development's performance: an analysis based on the multi-group moderation

Este estudo buscou verificar a influencia dos agentes da cadeia de suprimentos no desempenho do desenvolvimento de novos produtos quando os agentes são analisados em conjunto. A motivação desta pesquisa veio de estudos que alertaram para a consideração da integração da cadeia de suprimentos como um constructo multidimensional, englobando o envolvimento da manufatura, fornecedores e clientes no desenvolvimento de novos produtos; e devido à falta de informação sobre as influencias individuais destes agentes no desenvolvimento de novos produtos. Sob essas considerações, buscou-se construir um modelo analítico baseado na Teoria do Capital Social e Capacidade Absortiva, construir hipóteses a partir da revisão da literatura e conectar constructos como cooperação, envolvimento do fornecedor no desenvolvimento de novos produtos (DNP), envolvimento do cliente no DNP, envolvimento da manufatura no DNP, antecipação de novas tecnologias, melhoria contínua, desempenho operacional do DNP, desempenho de mercado do NPD e desempenho de negócio do DNP. Para testar as hipóteses foram consideradas três variáveis moderadoras, tais como turbulência ambiental (baixa, média e alta), indústria (eletrônicos, maquinários e equipamentos de transporte) e localização (América, Europa e Ásia). Para testar o modelo foram usados dados do projeto High Performance Manufacturing que contém 339 empresas das indústrias de eletrônicos, maquinários e equipamentos de transporte, localizadas em onze países. As hipóteses foram testadas por meio da Análise Fatorial Confirmatória (AFC) incluindo a moderação muti-grupo para as três variáveis moderadoras mencionadas anteriormente. Os principais resultados apontaram que as hipóteses relacionadas com cooperação foram confirmadas em ambientes de média turbulência, enquanto as hipóteses relacionadas ao desempenho no DNP foram confirmadas em ambientes de baixa turbulência ambiental e em países asiáticos. Adicionalmente, sob as mesmas condições, fornecedores, clientes e manufatura influenciam diferentemente no desempenho de novos produtos. Assim, o envolvimento de fornecedores influencia diretamente no desempenho operacional e indiretamente no desempenho de mercado e de negócio em baixos níveis de turbulência ambiental, na indústria de equipamentos de transporte em países da Americanos e Europeus. De igual forma, o envolvimento do cliente influenciou diretamente no desempenho operacional e indiretamente no desempenho de mercado e do negócio em médio nível de turbulência ambiental, na indústria de maquinários e em países Asiáticos. Fornecedores e clientes não influenciam diretamente no desempenho de mercado e do negócio e não influenciam indiretamente no desempenho operacional. O envolvimento da manufatura não influenciou nenhum tipo de desempenho do desenvolvimento de novos produtos em todos os cenários testados.

Supply chain turbulence: the impact of a mid-range event in multi-tier, multi-dimension supply chains

Nota: A autora agradece à Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) pela concessão de bolsa de estudos para o desenvolvimento deste projeto de pesquisa.

Coordenação e governança no Programa Territórios da Cidadania: uma análise multi-level a partir do Vale do Ribeira-SP

Poverty in Brazil has been gradually reduced. Among the main reasons, there are public policies for universalization of rights. On the other hand, the municipalities' Human Development Index indicates scenarios of growing inequality. In other words, some regions, basically of rural character, were left behind in that process of development. In 2008, the “Territórios da Cidadania” (Territories of Citizenship) Program was launched by the federal government, under high expectations. It was proposed to develop those regions and to prioritize the arrival of ongoing federal public policies where they were most demanded. The program has shown an innovative arrangement which included dozens of ministries and other federal agencies, state governments, municipalities and collegialities to the palliative management and control of the territory. In this structure, both new and existing jurisdictions came to support the program coordination. This arrangement was classified as an example of multi-level governance, whose theory has been an efficient instrument to understand the intra- and intergovernmental relations under which the program took place. The program lasted only three years. In Vale do Ribeira Territory – SP, few community leaderships acknowledge it, although not having further information about its actions and effects. Against this background, the approach of this research aims to study the program coordination and governance structure (from Vale Territory, considered as the most local level, until the federal government), based on the hypothesis that, beyond the local contingencies in Vale do Ribeira, the layout and implementation of the Territories of Citizenship Program as they were formulated possess fundamental structural issues that hinder its goals of reducing poverty and inequality through promoting the development of the territory. Complementing the research, its specific goal was to raise the program layout and background in order to understand how the relations, predicted or not in its structure, were formulated and how they were developed, with special attention to Vale do Ribeira-SP. Generally speaking, it was concluded that the coordination and governance arrangement of the Territories of Citizenship Program failed for not having developed qualified solutions to deal with the challenges of the federalist Brazilian structure, party politics, sectorized public actions, or even the territory contingencies and specificities. The complexity of the program, the poverty problem proposed to be faced, and the territorial strategy of development charged a high cost of coordination, which was not accomplished by the proposal of centralization in the federal government with internal decentralization of the coordination. As the presidency changed in 2011, the program could not present results that were able to justify the arguments for its continuation, therefore it was paralyzed, lost its priority status, and the resources previously invested were redirected.

Motivating sustainable goal choices and providing effective feedback

Overconsumption of natural resources and the associated environmental hazards are one of today’s most pressing global issues. In the western world, individual consumption in homes and workplaces is a key contributor to this problem. Reflecting the importance of individual action in this domain, this thesis focuses on studying and influencing choices related to sustainability and energy consumption made by people in their daily lives. There are three main components to this work. Firstly, this thesis asserts that people frequently make ineffective consumption reduction goal choices and attempts to understand the rationale for these poor choices by fitting them to goalsetting theory, an established theoretical model of behavior change. Secondly, it presents two approaches that attempt to influence goal choice towards more effective targets, one of which deals with mechanisms for goal priming and the other of which explores the idea that carefully designed toys can exert influence on children’s long term consumption behavior patterns. The final section of this thesis deals with the design of feedback to support the performance of environmentally sound activities. Key contributions surrounding goals include the finding that people choose easy sustainable goals despite immediate feedback as to their ineffectiveness and the discussion and study of goal priming mechanisms that can influence this choice process. Contributions within the design of value instilling toys include a theoretically grounded framework for the design of such toys and a completed and tested prototype toy. Finally, contributions in designing effective and engaging energy consumption feedback include the finding that negative feedback is best presented verbally compared with visually and this is exemplified and presented within a working feedback system. The discussions, concepts, prototypes and empirical findings presented in this work will be useful for both environmental psychologists and for HCI researchers studying eco-feedback.

Escalabilidade Paralela de um Algoritmo de Migração Reversa no Tempo (RTM) Pré-empilhamento

The seismic method is of extreme importance in geophysics. Mainly associated with oil exploration, this line of research focuses most of all investment in this area. The acquisition, processing and interpretation of seismic data are the parts that instantiate a seismic study. Seismic processing in particular is focused on the imaging that represents the geological structures in subsurface. Seismic processing has evolved significantly in recent decades due to the demands of the oil industry, and also due to the technological advances of hardware that achieved higher storage and digital information processing capabilities, which enabled the development of more sophisticated processing algorithms such as the ones that use of parallel architectures. One of the most important steps in seismic processing is imaging. Migration of seismic data is one of the techniques used for imaging, with the goal of obtaining a seismic section image that represents the geological structures the most accurately and faithfully as possible. The result of migration is a 2D or 3D image which it is possible to identify faults and salt domes among other structures of interest, such as potential hydrocarbon reservoirs. However, a migration fulfilled with quality and accuracy may be a long time consuming process, due to the mathematical algorithm heuristics and the extensive amount of data inputs and outputs involved in this process, which may take days, weeks and even months of uninterrupted execution on the supercomputers, representing large computational and financial costs, that could derail the implementation of these methods. Aiming at performance improvement, this work conducted the core parallelization of a Reverse Time Migration (RTM) algorithm, using the parallel programming model Open Multi-Processing (OpenMP), due to the large computational effort required by this migration technique. Furthermore, analyzes such as speedup, efficiency were performed, and ultimately, the identification of the algorithmic scalability degree with respect to the technological advancement expected by future processors

Dominance of legume trees alters nutrient relations in mixed species forest restoration plantings within seven years

Failures in reforestation are often attributed to nutrient limitation for tree growth. We compared tree performance and nitrogen and phosphorus relations in adjacent mixed-species plantings of contrasting composition, established for forest restoration on Ultisol soil, originally covered by tropical semi-deciduous Atlantic Forest in Southeast Brazil. Nutrient relations of four tree species occurring in both planting mixtures were compared between a legume-dominated, species-poor direct seeding mixture of early-successional species ("legume mixture"), and a species-diverse, legume-poor mixture of all successional groups ("diverse mixture"). After 7 years, the legume mixture had 6-fold higher abundance of N(2)-fixing trees, 177% higher total tree basal area, 22% lower litter C/N, six-fold higher in situ soil resin-nitrate, and 40% lower in situ soil resin-P, compared to the diverse mixture. In the legume mixture, non-N(2)-fixing legume Schizolobium parahyba (Fabaceae-Caesalpinioideae) had significantly lower proportional N resorption, and both naturally regenerating non-legume trees had significantly higher leaf N concentrations, and higher proportional P resorption, than in the diverse mixture. This demonstrate forms of plastic adjustment in all three non-N(2)-fixing species to diverged nutrient relations between mixtures. By contrast, leaf nutrient relations in N(2)-fixing Enterolobium contortisiliquum (Fabaceae-Mimosoideae) did not respond to planting mixtures. Rapid N accumulation in the legume mixture caused excess soil nitrification over nitrate immobilization and tighter P recycling compared with the diverse mixture. The legume mixture succeeded in accelerating tree growth and canopy closure, but may imply periods of N losses and possibly P limitation. Incorporation of species with efficient nitrate uptake and P mobilization from resistant soil pools offers potential to optimize these tradeoffs.

Quantitative characterization of multi-phase materials by digital image processing

An automatic image processing and analysis technique has been developed for quantitative characterization of multi-phase materials. For the development of this technique is used the Khoros system that offers the basic morphological tools and a flexible, visual programming language. These techniques are implemented in a highly user oriented image processing environment that allows the user to adapt each step of the processing to his special requirements.To illustrate the implementation and performance of this technique, images of two different materials are processed for microstructure characterization. The result is presented through the determination of volume fraction of the different phases or precipitates.

Allocation of protective devices in distribution circuits using nonlinear programming models and genetic algorithms

The optimized allocation of protective devices in strategic points of the circuit improves the quality of the energy supply and the system reliability index. This paper presents a nonlinear integer programming (NLIP) model with binary variables, to deal with the problem of protective device allocation in the main feeder and all branches of an overhead distribution circuit, to improve the reliability index and to provide customers with service of high quality and reliability. The constraints considered in the problem take into account technical and economical limitations, such as coordination problems of serial protective devices, available equipment, the importance of the feeder and the circuit topology. The use of genetic algorithms (GAs) is proposed to solve this problem, using a binary representation that does (1) or does not (0) show allocation of protective devices (reclosers, sectionalizers and fuses) in predefined points of the circuit. Results are presented for a real circuit (134 busses), with the possibility of protective device allocation in 29 points. Also the ability of the algorithm in finding good solutions while improving significantly the indicators of reliability is shown. (C) 2003 Elsevier B.V. All rights reserved.