Emission Control in Diesel Engines by Alcohol Fumigation, 1990

Exhaust emissions from diesel engines are a substantial source of air pollution in this country. In recognition of this fact, the Environmental Protection Agency has issued strict new regulations due to take effect -in 1991 and 1994 that will drastically reduce the amount of some pollutants these engines will be allowed to emit. The technology is not currently available to produce diesel engines that can meet these regulations without large penalties in engine performance and efficiency. One technique that offers promise of being able to reduce emissions from both existing engines and new engines is alcohol fumigation.

Vehicle Occupancy, 1981

The purpose of the survey is to monitor trends in vehicle occupancy. These trends may reflect changes in the driving habits of the general public caused by fuel shortages and economic conditions.

Compendium of Scheduled Violations and Scheduled Fines, July 2016

When a court imposes a fine or forfeiture for a violation of state law, or city or county ordinance, except an ordinance regulating the parking of motor vehicles, the court or the clerk of the district court shall assess an additional penalty in the form of a criminal penalty surcharge equal to thirty-five percent of the fine or forfeiture imposed.

Air Pollution and High Density Lipoprotein Structure and Function

Thesis (Ph.D.)--University of Washington, 2016-06

A study of drivers in major accidents, September, 1935-April, 1936, by Harold L. Gaunt [and] Laurence W. Murray, 1936

This preliminary study of the drivers involved in major accidents in Iowa and their subsequent examination was undertaken by the State Planning Board. All personal injury and fatal accidents, and those property damage accidents of such serious nature as to indicate the suspension or revocation of the drivers license, occurring in the state from 1935 to April 1036 are included.

Mobilidade sustentável : interação entre veículos motorizados e utentes vulneráveis da via pública

O automóvel tem sido nas últimas décadas o principal meio de transporte para a realização de deslocações diárias. Este é um panorama tanto a nível Nacional como Europeu e deve-se ao crescimento económico e aos investimentos centrados em infraestruturas rodoviárias. A organização das atividades e o planeamento nos meios urbanos está, muitas vezes, projetada em função do automóvel e pouco preparado para outras formas de mobilidade, nomeadamente para peões e ciclistas. Existe uma necessidade de mudança deste panorama e a necessidade de uma sociedade que privilegie os modos de transporte suave. No entanto, surge a necessidade de garantir a segurança dos utentes mais vulneráveis da via pública. Esta dissertação de Mestrado tem como principal objetivo analisar de que forma a sinistralidade viária para peões e ciclistas tem evoluído nas freguesias abrangidas pela atividade da Polícia de Segurança Pública (PSP) de Aveiro e quais as principais dificuldades que estes enfrentam nas suas deslocações diárias. Para alcançar este objetivo foram analisados dados de sinistralidade viária fornecidos pela PSP do comando distrital de Aveiro que envolviam a interação de veículos motorizados e utentes vulneráveis da via pública (peões ou ciclistas). Numa segunda fase foi elaborado um inquérito, com o objetivo de perceber as principais dificuldades encontradas pelos utentes da Universidade que privilegiam os modos de deslocação suave nas suas viagens diárias. Este estudo revelou que para a área em estudo, no concelho de Aveiro, o número de acidentes que envolvem a interação de veículos motorizados com utentes vulneráveis da via pública aumentou 5% de 2012 a 2013 e 4% de 2013 a 2014. Os utentes com idades superiores a 55 anos revelaram-se os mais vulneráveis, não só em termos de número de ocorrências mas também na gravidade de lesões, representando 50% de mortes e feridos graves, Em termos de atropelamento de peões existe uma forte tendência para peões do sexo feminino (73%), em oposição ao perfil do condutor atropelante onde 69% são do sexo masculino Em relação a acidentes envolvendo ciclistas, 68% dos lesados são do sexo masculino. Uma possível explicação poderá consistir numa maior utilização de bicicletas por parte dos mesmos, como foi comprovado na amostra recolhida no inquérito, mas não existem mais estatísticas em Aveiro sobre a distribuição por género dos utilizadores de bicicleta. Do inquérito efetuado conclui-se que os principais problemas encontrados pelos utentes inquiridos são, à semelhança de peões e ciclistas, a falta de sensibilização dos automobilistas e as condições meteorológicas. Em terceiro lugar encontra-se, para os peões, o aumento do risco de atos de vandalismo e assaltos e, para os ciclistas, a falta de vias dedicadas. Por outro lado, as principais motivações são, tanto para peões como para ciclistas, o custo reduzido ou nulo e a facilidade de locomoção.

The numerical simulation of aircraft evacuation and its application to aircraft safety

Abstract not available

Transportation of Children in Ground Ambulances: Professionals' Knowledge and Safety Measures

Background: The transport of children in ground ambulances is a rarely studied topic worldwide. The ambulance vehicle is a unique and complex environment with particular challenges for the safe, correct and effective transportation of patients. Unlike the well developed and readily available guidelines on the safe transportation of a child in motor vehicles, there is a lack on consistent specifications for transporting children in ambulances. Nurses are called daily to transfer children to hospitals or other care centers, so safe transport practices should be a major concern. Purpose: to know which are the safety precautions and specific measures used in the transport of children in ground ambulances by nurses and firefighters and to identify what knowledge these professionals had about safe modes of children transportation in ground ambulances. Methods: In this context, an exploratory - descriptive study and quantitative analysis was conducted. A questionnaire was completed by 135 nurses and firefighters / ambulance crew based on 4 possible children transport scenarios proposed by the NHTSA (National Highway Traffic Safety Administration) and covered 5 different children´s age groups (new born children, 1 to 12 months; 1 to 3 years old; 4 to 7 years old and 8 to 12 years old). Results: The main results showed a variety of safety measures used by the professionals and a significant difference between their actual mode of transportation and the mode they consider to be the ideal considering security goals. In addition, findings showed that achieved scores related to what ambulance crews do in the considered scenarios reflect mostly satisfactory levels of transportation rather than optimum levels of safety, according to NHTSA recommendations. Variables as gender, educational qualifications, occupational group and local where professionals work seem to influence the transport options. Female professionals and nurses from pediatric units appear to do a safer transportation of children in ground ambulances than other professionals. Conclusion: Several professionals refereed unawareness of the safest transportation options for children in ambulances and did not to know the existence of specific recommendations for this type of transportation. The dispersion of the results suggests the need for investment in professional training and further regulation for this type of transportation.

Caminhos que estruturam cidades: redes técnicas de transporte sobre trilhos e a conformação intra-urbana de Natal

The railroad, from 1870 and on, becomes an usual complaining in the press s and politician elite s speeches, especially because of Natal s geographic isolation. The implantation of two railroads in the capital territory Estrada de Ferro de Natal a Nova Cruz, afterwards part of Great Western Railway Company network, and Estrada de Ferro Central do Rio Grande do Norte had serious implications in the urban environment. While railroad s structures were already consolidated, other transportation mechanisms were being implanted in the first decades of the 20th century, such as trams lines, which, by the way, was a transport modal that also used rails as a dislocation meaning. Considering these questions, we may ask: how come railroads and tramways demands, roads and buildings had influenced the internal organization of Natal? We work with the general hypothesis that the influence of technical networks, composed by tramways and railroads, over Natal s urban space happened in a diversified way, sometimes consolidating social aspects in certain areas, sometimes improving the occupation of others. The impact over the city s territory also happens in a diversified way between the buildings/railroad s complexes and the pathways. The different scale of the train in comparison to the trams velocity, size, noise level, flow, among others is also a cause to the different consequences in urban environment. The main objective of this work is to understand the role of circulation technical networks in the construction process of urban space in Natal, as a way to contribute to the urban historiography about the subject. The time frame adopted, between 1881 and 1937, marks the time path of railroads and tramways in Rio Grande do Norte: 1881 is the year of railroad s first section inauguration from Natal to São José do Mipibu as well of the railroad complex in the Republic Square in Natal; the year of 1937 marks the beginning of tramways declination process in the city. At this time railroads and tramways had to face more intensively the competition of motor vehicles. The theory reference adopted is based on concepts and analysis of authors, such as Flávio Villaça and Roberto Lobato Corrêa references to the concepts of urban structure , localization and accessibility and Gabriel Dupuy to explain the concept of urban technical networks . These references reveal the conflict of different realities in the urban universe interests and values which is an important factor about the construction of urban space. The information sources used were from two distinctive natures: primary, journals of the time studied and official government reports, and secondary, based on other works about the subject. It was also used by this study iconographic source, especially images from the data base of the research group História da Cidade, do Território e do Urbanismo .

A deformation model of flexible, high area-to-mass ratio debris under perturbations and validation method

A new type of space debris was recently discovered by Schildknecht in near -geosynchronous orbit (GEO). These objects were later identified as exhibiting properties associated with High Area-to-Mass ratio (HAMR) objects. According to their brightness magnitudes (light curve), high rotation rates and composition properties (albedo, amount of specular and diffuse reflection, colour, etc), it is thought that these objects are multilayer insulation (MLI). Observations have shown that this debris type is very sensitive to environmental disturbances, particularly solar radiation pressure, due to the fact that their shapes are easily deformed leading to changes in the Area-to-Mass ratio (AMR) over time. This thesis proposes a simple effective flexible model of the thin, deformable membrane with two different methods. Firstly, this debris is modelled with Finite Element Analysis (FEA) by using Bernoulli-Euler theory called “Bernoulli model”. The Bernoulli model is constructed with beam elements consisting 2 nodes and each node has six degrees of freedom (DoF). The mass of membrane is distributed in beam elements. Secondly, the debris based on multibody dynamics theory call “Multibody model” is modelled as a series of lump masses, connected through flexible joints, representing the flexibility of the membrane itself. The mass of the membrane, albeit low, is taken into account with lump masses in the joints. The dynamic equations for the masses, including the constraints defined by the connecting rigid rod, are derived using fundamental Newtonian mechanics. The physical properties of both flexible models required by the models (membrane density, reflectivity, composition, etc.), are assumed to be those of multilayer insulation. Both flexible membrane models are then propagated together with classical orbital and attitude equations of motion near GEO region to predict the orbital evolution under the perturbations of solar radiation pressure, Earth’s gravity field, luni-solar gravitational fields and self-shadowing effect. These results are then compared to two rigid body models (cannonball and flat rigid plate). In this investigation, when comparing with a rigid model, the evolutions of orbital elements of the flexible models indicate the difference of inclination and secular eccentricity evolutions, rapid irregular attitude motion and unstable cross-section area due to a deformation over time. Then, the Monte Carlo simulations by varying initial attitude dynamics and deformed angle are investigated and compared with rigid models over 100 days. As the results of the simulations, the different initial conditions provide unique orbital motions, which is significantly different in term of orbital motions of both rigid models. Furthermore, this thesis presents a methodology to determine the material dynamic properties of thin membranes and validates the deformation of the multibody model with real MLI materials. Experiments are performed in a high vacuum chamber (10-4 mbar) replicating space environment. A thin membrane is hinged at one end but free at the other. The free motion experiment, the first experiment, is a free vibration test to determine the damping coefficient and natural frequency of the thin membrane. In this test, the membrane is allowed to fall freely in the chamber with the motion tracked and captured through high velocity video frames. A Kalman filter technique is implemented in the tracking algorithm to reduce noise and increase the tracking accuracy of the oscillating motion. The forced motion experiment, the last test, is performed to determine the deformation characteristics of the object. A high power spotlight (500-2000W) is used to illuminate the MLI and the displacements are measured by means of a high resolution laser sensor. Finite Element Analysis (FEA) and multibody dynamics of the experimental setups are used for the validation of the flexible model by comparing with the experimental results of displacements and natural frequencies.

Trajectory prediction uncertainty modelling for Air Traffic Management

The anticipated growth of air traffic worldwide requires enhanced Air Traffic Management (ATM) technologies and procedures to increase the system capacity, efficiency, and resilience, while reducing environmental impact and maintaining operational safety. To deal with these challenges, new automation and information exchange capabilities are being developed through different modernisation initiatives toward a new global operational concept called Trajectory Based Operations (TBO), in which aircraft trajectory information becomes the cornerstone of advanced ATM applications. This transformation will lead to higher levels of system complexity requiring enhanced Decision Support Tools (DST) to aid humans in the decision making processes. These will rely on accurate predicted aircraft trajectories, provided by advanced Trajectory Predictors (TP). The trajectory prediction process is subject to stochastic effects that introduce uncertainty into the predictions. Regardless of the assumptions that define the aircraft motion model underpinning the TP, deviations between predicted and actual trajectories are unavoidable. This thesis proposes an innovative method to characterise the uncertainty associated with a trajectory prediction based on the mathematical theory of Polynomial Chaos Expansions (PCE). Assuming univariate PCEs of the trajectory prediction inputs, the method describes how to generate multivariate PCEs of the prediction outputs that quantify their associated uncertainty. Arbitrary PCE (aPCE) was chosen because it allows a higher degree of flexibility to model input uncertainty. The obtained polynomial description can be used in subsequent prediction sensitivity analyses thanks to the relationship between polynomial coefficients and Sobol indices. The Sobol indices enable ranking the input parameters according to their influence on trajectory prediction uncertainty. The applicability of the aPCE-based uncertainty quantification detailed herein is analysed through a study case. This study case represents a typical aircraft trajectory prediction problem in ATM, in which uncertain parameters regarding aircraft performance, aircraft intent description, weather forecast, and initial conditions are considered simultaneously. Numerical results are compared to those obtained from a Monte Carlo simulation, demonstrating the advantages of the proposed method. The thesis includes two examples of DSTs (Demand and Capacity Balancing tool, and Arrival Manager) to illustrate the potential benefits of exploiting the proposed uncertainty quantification method.

Caminhos que estruturam cidades: redes técnicas de transporte sobre trilhos e a conformação intra-urbana de Natal

The railroad, from 1870 and on, becomes an usual complaining in the press s and politician elite s speeches, especially because of Natal s geographic isolation. The implantation of two railroads in the capital territory Estrada de Ferro de Natal a Nova Cruz, afterwards part of Great Western Railway Company network, and Estrada de Ferro Central do Rio Grande do Norte had serious implications in the urban environment. While railroad s structures were already consolidated, other transportation mechanisms were being implanted in the first decades of the 20th century, such as trams lines, which, by the way, was a transport modal that also used rails as a dislocation meaning. Considering these questions, we may ask: how come railroads and tramways demands, roads and buildings had influenced the internal organization of Natal? We work with the general hypothesis that the influence of technical networks, composed by tramways and railroads, over Natal s urban space happened in a diversified way, sometimes consolidating social aspects in certain areas, sometimes improving the occupation of others. The impact over the city s territory also happens in a diversified way between the buildings/railroad s complexes and the pathways. The different scale of the train in comparison to the trams velocity, size, noise level, flow, among others is also a cause to the different consequences in urban environment. The main objective of this work is to understand the role of circulation technical networks in the construction process of urban space in Natal, as a way to contribute to the urban historiography about the subject. The time frame adopted, between 1881 and 1937, marks the time path of railroads and tramways in Rio Grande do Norte: 1881 is the year of railroad s first section inauguration from Natal to São José do Mipibu as well of the railroad complex in the Republic Square in Natal; the year of 1937 marks the beginning of tramways declination process in the city. At this time railroads and tramways had to face more intensively the competition of motor vehicles. The theory reference adopted is based on concepts and analysis of authors, such as Flávio Villaça and Roberto Lobato Corrêa references to the concepts of urban structure , localization and accessibility and Gabriel Dupuy to explain the concept of urban technical networks . These references reveal the conflict of different realities in the urban universe interests and values which is an important factor about the construction of urban space. The information sources used were from two distinctive natures: primary, journals of the time studied and official government reports, and secondary, based on other works about the subject. It was also used by this study iconographic source, especially images from the data base of the research group História da Cidade, do Território e do Urbanismo .

Work, class and conflict: a comparative study of three Cork factories, incorporating oral testimony

This dissertation presents a comparative study of three factories in Cork Harbour area, Sunbeam Wolsey (1927-90), Irish Steel (1939-2001) and the Ford Marina Plant (1917-84). All three factories were significant industrial employers in both a domestic (Irish) and a local (Cork) context and are broadly representative of the Irish manufacturing industry that was developed under the policies of tariff protection introduced in the 1930s and gradually phased out between the late 1950s and the mid-1980s. Sunbeam Wolsey was a textile and clothing concern located on the north side of Cork City that possessed a borderline monopoly within its economic sector and was among the largest private employers of female labour in twentieth century Ireland. Irish Steel was the country’s only steel mill, located on Haulbowline island, a brief ferry-ride from the seaside town of Cobh, and was unusual in being one of the few manufacturing concerns operated as a nationalised industry under the auspices of the state. The Ford Marina plant predated the introduction of protectionism by more than a decade and began as the centre of the Ford empire’s tractor manufacturing business, before switching to the production of private motor vehicles for the Irish market in 1932. All three industries were closed or sold off when the state withdrew support, either in the form of tariff protection (Ford, Sunbeam) or direct funding (Irish Steel). While devoting much attention to the three firms, the central concern of this dissertation is not the companies themselves (though the economic history portion of the dissertation is substantial), but the workers they employed, examining the lives of these individuals both as members of the Irish working class, and, more specifically, as employees of the three factories under consideration. The project can be best described as a comparative factory study, comparing and contrasting the three workforces, focusing primarily on industrial relation and the experience of work. This dissertation utilises both documentary evidence and a significant quantity of oral testimony, breaking new ground by making the workplace the central focus of its investigation. The principal aims of the study are: 1. To document the lives of those who worked in these factories, capturing through oral testimony their subjective experiences of social class and factory life, as well as differences among narrators in terms of gender and status. In achieving this aim, the study will provide a broader social context for its detailed analysis of work and industrial relations in each firm. 2. To analyse the three workplaces and determine how and why each developed such distinct systems of industrial relations at the factory level, as well as to compare and contrast these systems. 3. To examine the nature of work in each factory and to determine how work and industrial relations in each firm developed over time, relating these changes both to internal and external factors. Additionally, the project will provide a comparative analysis of these changes.

FY 2016 Equipment and Vehicle Revolving Fund report

The Equipment and Vehicle Revolving Fund report covers all equipment and vehicle purchases through the highway materials and equipment revolving fund during FY 2016.

General ledger account coding

The Supplier-Relationship Management system is used by SC Department of Motor Vehicles personnel to requisition most purchases of services and materials for DMV purposes. General ledger account codes are first assigned by the shopping cart preparer. Administrative departments such as procurement, payables and budget regularly correct general ledger codes during the purchasing cycle to ensure proper reporting. DMV goals are consistent with accurate reporting of expenditures by general ledger account code. Incorrect reporting would be contrary to DMV' s vision of promoting effective and efficient business processes. Journal entries increased from 34 to 66 in FY2014 and FY20152 ; with a notable amount correcting the general ledger code. This project examines the assignment or correction of general ledger account codes for DMV's planned purchases for the purpose of process improvement.