Water table waves in an unconfined aquifer: Experiments and modeling

[1] Comprehensive measurements are presented of the piezometric head in an unconfined aquifer during steady, simple harmonic oscillations driven by a hydrostatic clear water reservoir through a vertical interface. The results are analyzed and used to test existing hydrostatic and nonhydrostatic, small-amplitude theories along with capillary fringe effects. As expected, the amplitude of the water table wave decays exponentially. However, the decay rates and phase lags indicate the influence of both vertical flow and capillary effects. The capillary effects are reconciled with observations of water table oscillations in a sand column with the same sand. The effects of vertical flows and the corresponding nonhydrostatic pressure are reasonably well described by small-amplitude theory for water table waves in finite depth aquifers. That includes the oscillation amplitudes being greater at the bottom than at the top and the phase lead of the bottom compared with the top. The main problems with respect to interpreting the measurements through existing theory relate to the complicated boundary condition at the interface between the driving head reservoir and the aquifer. That is, the small-amplitude, finite depth expansion solution, which matches a hydrostatic boundary condition between the bottom and the mean driving head level, is unrealistic with respect to the pressure variation above this level. Hence it cannot describe the finer details of the multiple mode behavior close to the driving head boundary. The mean water table height initially increases with distance from the forcing boundary but then decreases again, and its asymptotic value is considerably smaller than that previously predicted for finite depth aquifers without capillary effects. Just as the mean water table over-height is smaller than predicted by capillarity-free shallow aquifer models, so is the amplitude of the second harmonic. In fact, there is no indication of extra second harmonics ( in addition to that contained in the driving head) being generated at the interface or in the interior.

Surface stickiness of drops of carbohydrate and organic acid solutions during convective drying: Experiments and modeling

Drying kinetics of low molecular weight sugars such as fructose, glucose, sucrose and organic acid such as citric acid and high molecular weight carbohydrate such as maltodextrin (DE 6) were determined experimentally using single drop drying experiments as well as predicted numerically by solving the mass and heat transfer equations. The predicted moisture and temperature histories agreed with the experimental ones within 6% average relative (absolute) error and average difference of +/- 1degreesC, respectively. The stickiness histories of these drops were determined experimentally and predicted numerically based on the glass transition temperature (T-g) of surface layer. The model predicted the experimental observations with good accuracy. A nonsticky regime for these materials during spray drying is proposed by simulating a drop, initially 120 mum in diameter, in a spray drying environment.

Rates of electronic energy transfer in conformationally flexible bichromophoric macrocyclic complexes: a combined experimental and molecular modeling study

Electronic energy transfer (EET) rate constants between a naphthalene donor and anthracene acceptor in [ZnL4a](ClO4)(2) and [ZnL4b](ClO4)(2) were determined by time-resolved fluorescence where L-4a and L-4b are the trans and cis isomers of 6-((anthracen-9-yl-methyl)amino)-6,13-dimethyl-13-((naphthalen-1-yl-methyl)amino)-1,4,8,11-tetraazacyclotetradecane, respectively. These isomers differ in the relative disposition of the appended chromophores with respect to the macrocyclic plane. The trans isomer has an energy transfer rate constant (k(EET)) of 8.7 x 10(8) s(-1), whereas that of the cis isomer is significantly faster (2.3 x 10(9) s(-1)). Molecular modeling was used to determine the likely distribution of conformations in CH3CN solution for these complexes in an attempt to identify any distance or orientation dependency that may account for the differing rate constants observed. The calculated conformational distributions together with analysis by H-1 NMR for the [ZnL4a](2+) trans complex in the common trans-III N-based isomer gave a calculated Forster rate constant close to that observed experimentally. For the [ZnL4b](2+) cis complex, the experimentally determined rate constant may be attributed to a combination of trans-Ill and trans-I N-based isomeric forms of the complex in solution.

Evidence and information for health policy: a decade of change

Over the past decade or so, there has been increasing demand for greater clarity about the major causes of disease and injury, how these differentially affect populations, and how they are changing. In part, this demand has been motivated by resource constraints and a realisation that better health is possible with more informed allocation of resources. At the same time, there has been a change in the way population health and its determinants are quantified, with a much closer integration of the quantitative population sciences (such as epidemiology, demography and health economics) to strengthen and broaden the evidence base for healthcare policy.

A gest??o da informa????o e a modelagem de processos

O estudo trata da gest??o da informa????o, utilizando a abordagem de n??veis de maturidade como forma de obter melhorias na governan??a corporativa de uma organiza????o do setor p??blico. A gest??o da informa????o ?? entendida como processo, e o mapeamento de processos ?? tratado como primeiro passo para gerar oportunidades de melhoria. Uma proposta de formato para modelar e descrever os processos de gest??o da informa????o ?? apresentada, e um caso pr??tico de mapeamento baseado na proposta ?? descrito. O mapeamento foi realizado em uma organiza????o p??blica, em uma unidade organizacional respons??vel por gerir grande parte das informa????es corporativas da organiza????o. Algumas fases do trabalho j?? foram cumpridas, e as fases seguintes fazem parte de um cronograma em andamento. Os resultados pr??ticos observados indicam que a metodologia proposta pode ser interessante para atingir, paulatinamente, maiores n??veis de conhecimento sobre como gerenciar adequadamente a informa????o.

Uma avaliação das metodologias de desagregação da exergia física para a modelagem termoeconômica de sistemas

Talvez não seja nenhum exagero afirmar que há quase um consenso entre os praticantes da Termoeconomia de que a exergia, ao invés de só entalpia, seja a magnitude Termodinâmica mais adequada para ser combinada com o conceito de custo na modelagem termoeconômica, pois esta leva em conta aspectos da Segunda Lei da Termodinâmica e permite identificar as irreversibilidades. Porém, muitas vezes durante a modelagem termoeconômica se usa a exergia desagregada em suas parcelas (química, térmica e mecânica), ou ainda, se inclui a neguentropia que é um fluxo fictício, permitindo assim a desagregação do sistema em seus componentes (ou subsistemas) visando melhorar e detalhar a modelagem para a otimização local, diagnóstico e alocação dos resíduos e equipamentos dissipativos. Alguns autores também afirmam que a desagregação da exergia física em suas parcelas (térmica e mecânica) permite aumentar a precisão dos resultados na alocação de custos, apesar de fazer aumentar a complexidade do modelo termoeconômico e consequentemente os custos computacionais envolvidos. Recentemente alguns autores apontaram restrições e possíveis inconsistências do uso da neguentropia e deste tipo de desagregação da exergia física, propondo assim alternativas para o tratamento de resíduos e equipamentos dissipativos que permitem a desagregação dos sistemas em seus componentes. Estas alternativas consistem, basicamente, de novas propostas de desagregação da exergia física na modelagem termoeconômica. Sendo assim, este trabalho tem como objetivo avaliar as diferentes metodologias de desagregação da exergia física para a modelagem termoeconômica, tendo em conta alguns aspectos como vantagens, restrições, inconsistências, melhoria na precisão dos resultados, aumento da complexidade e do esforço computacional e o tratamento dos resíduos e equipamentos dissipativos para a total desagregação do sistema térmico. Para isso, as diferentes metodologias e níveis de desagregação da exergia física são aplicados na alocação de custos para os produtos finais (potência líquida e calor útil) em diferentes plantas de cogeração considerando como fluido de trabalho tanto o gás ideal bem como o fluido real. Plantas essas com equipamentos dissipativos (condensador ou válvula) ou resíduos (gases de exaustão da caldeira de recuperação). Porém, foi necessário que uma das plantas de cogeração não incorporasse equipamentos dissipativos e nem caldeira de recuperação com o intuito de avaliar isoladamente o efeito da desagregação da exergia física na melhoria da precisão dos resultados da alocação de custos para os produtos finais.

Researchers' information needs in the bibliographic database : a literature review

This article is published online with Open Access and distributed under the terms of the Creative Commons Attribution Non-Commercial License.

Modelagem da distribuição geográfica atual e futura de Guerlinguetus (Rodentia, Sciuridae) no Brasil

O gênero Guerlinguetus, pertencente à família Sciuridae, possui sete espécies existentes no Brasil. Essas espécies têm sido tratadas como sinônimos de Sciurus aestuans, mas foram distinguidas em um gênero próprio com base nas revisões taxonômicas mais abrangentes disponíveis até recentemente. Apesar disso, pouco há na literatura sobre a distribuição das espécies desse gênero no Brasil e nenhuma pesquisa visando o conhecimento de sua distribuição futura havia sido realizada. A modelagem de distribuição potencial de espécies tem se tornado um componente importante dos planos de conservação e uma grande quantidade de técnicas têm sido desenvolvidas com esta finalidade. Ela pode ser uma ferramenta importante para determinar o grau de ameaça principalmente em espécies ou grupos com poucas informações disponíveis sobre sua distribuição. Com isso, o objetivo do presente trabalho foi verificar a influência das possíveis mudanças climáticas na distribuição das espécies de Guerlinguetus no Brasil, através da modelagem potencial das distribuições atual e futura dessas espécies. Para isso foram utilizados dados climáticos e topográficos e o cenário pessimista de emissão de CO2 (A2) para o ano 2070, do Modelo de Circulação Geral CSIRO, com base no quarto relatório do Painel Intergovernamental de Mudanças Climáticas. Os modelos gerados apresentaram perda significativa de áreas consideradas ambientalmente adequadas, do modelo de distribuição atual para o modelo de distribuição futura para as espécies de Guerlinguetus, com exceção de G. aestuans. Apesar da expansão da região potencial de distribuição de G. aestuans para o ano de 2070, a média dos valores de adequabilidade ambiental diminuiu em relação ao modelo de distribuição atual. A localização dessas espécies de hábito arborícola em áreas geograficamente espalhadas dentro da Amazônia, Cerrado e Mata Atlântica é preocupante, devido a grande perda de área original desses biomas, tornando possível a hipótese de ameaça à sobrevivência das espécies devido a mudanças ambientais futuras.

Information and Technology Implementation Issues in AAL Solutions

With the population ageing effect, the technological developments, and pressure to reduce the cost with healthcare, are reunited the conditions for the development of Ambient Assisted Living (AAL) solutions. This work is a revision of the current state of the art. Its aim is the characterization of the AAL solutions, within the AAL4ALL scope. Therefore, it is presented features, scenarios and projects, referring the limitations and the opportunities for the future developments of prototypes using high level information and technology in AAL environments. Moreover, it is presented guidelines of operation, exposing the conceptual approach, and the discussion and conclusion, which present recommendations and current AAL4ALL project positions in terms of concepts and technologies.

Modeling Carbon Nanotube Electrical Properties in CNT/Polymer Composites

In this work it is demonstrated that the capacitance between two cylinders increases with the rotation angle and it has a fundamental influence on the composite dielectric constant. The dielectric constant is lower for nematic materials than for isotropic ones and this can be attributed to the effect of the filler alignment in the capacitance. The effect of aspect ratio in the conductivity is also studied in this work. Finally, based on previous work and by comparing to results from the literature it is found that the electrical conductivity in this type of composites is due to hopping between nearest fillers resulting in a weak disorder regime that is similar to the single junction expression.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Conditioning information in mutual fund performance evaluation: Portuguese evidence

We estimate and compare the performance of Portuguese-based mutual funds that invest in the domestic market and in the European market using unconditional and conditional models of performance evaluation. Besides applying both partial and full conditional models, we use European information variables, instead of the most common local ones, and consider stochastically detrended conditional variables in order to avoid spurious regressions. The results suggest that mutual fund managers are not able to outperform the market, presenting negative or neutral performance. The incorporation of conditioning information in performance evaluation models is supported by our findings, as it improves the explanatory power of the models and there is evidence of both time-varying betas and alphas related to the public information variables. It is also shown that the number of lags to be used in the stochastic detrending procedure is a critical choice, as it will impact the significance of the conditioning information. In addition, we observe a distance effect, since managers who invest locally seem to outperform those who invest in the European market. However, after controlling for public information, this effect is slightly reduced. Furthermore, the results suggest that survivorship bias has a small impact on performance estimates.

Criminal Liability of Organizations, Corporations, Legal Persons, and Similar Entities on Law of Portuguese Cybercrime: A Brief Discussion on the Issue of Crimes of “False Information,” the “Damage on Other Programs or Computer Data,” the “Computer-Software Sabotage,” the “Illegitimate Access,” the “Unlawful Interception,” and “Illegitimate Reproduction of the Protected Program”

Abstract: in Portugal, and in much of the legal systems of Europe, «legal persons» are likely to be criminally responsibilities also for cybercrimes. Like for example the following crimes: «false information»; «damage on other programs or computer data»; «computer-software sabotage»; «illegitimate access»; «unlawful interception» and «illegitimate reproduction of protected program». However, in Portugal, have many exceptions. Exceptions to the «question of criminal liability» of «legal persons». Some «legal persons» can not be blamed for cybercrime. The legislature did not leave! These «legal persons» are v.g. the following («public entities»): legal persons under public law, which include the public business entities; entities utilities, regardless of ownership; or other legal persons exercising public powers. In other words, and again as an example, a Portuguese public university or a private concessionaire of a public service in Portugal, can not commit (in Portugal) any one of cybercrime pointed. Fair? Unfair. All laws should provide that all legal persons can commit cybercrimes. PS: resumo do artigo em inglês.

Automatic modeling of an orthotic bracing for nonoperative correction of PectusCarinatum

Pectus Carinatum is a deformity of the chest wall, characterized by an anterior protrusion of the sternum, often corrected surgically due to cosmetic motivation. This work presents an alternative approach to the current open surgery option, proposing a novel technique based on a personalized orthosis. Two different processes for the orthosis’ personalization are presented. One based on a 3D laser scan of the patient chest, followed by the reconstruction of the thoracic wall mesh using a radial basis function, and a second one, based on a computer tomography scan followed by a neighbouring cells algorithm. The axial position where the orthosis is to be located is automatically calculated using a Ray-Triangle intersection method, whose outcome is input to a pseudo Kochenek interpolating spline method to define the orthosis curvature. Results show that no significant differences exist between the patient chest physiognomy and the curvature angle and size of the orthosis, allowing a better cosmetic outcome and less initial discomfort

Promoting Success in the Introduction of Health Information Systems

The significant number of publications describing unsuccessful cases in the introduction of health information systems makes it advisable to analyze the factors that may be contributing to such failures. However, the very notion of success is not equally assumed in all publications. Based in a literature review, the authors argue that the introduction of systems must be based in an eclectic combination of knowledge fields, adopting methodologies that strengthen the role of organizational culture and human resources in this project, as a whole. On the other hand, the authors argue that the introduction of systems should be oriented by a previously defined matrix of factors, against which the success can be measured.