Technical note: how accurate can stalagmite formation temperatures be determined using vapour bubble radius measurements in fluid inclusions?

Stalagmites are natural archives containing detailed information on continental climate variability of the past. Microthermometric measurements of fluid inclusion homogenisation temperatures allow determination of stalagmite formation temperatures by measuring the radius of stable laser-induced vapour bubbles inside the inclusions. A reliable method for precisely measuring the radius of vapour bubbles is presented. The method is applied to stalagmite samples for which the formation temperature is known. An assessment of the bubble radius measurement accuracy and how this error influences the uncertainty in determining the formation temperature is provided. We demonstrate that the nominal homogenisation temperature of a single inclusion can be determined with an accuracy of ±0.25 °C, if the volume of the inclusion is larger than 105 μm3. With this method, we could measure in a proof-of-principle investigation that the formation temperature of 10–20 yr old inclusions in a stalagmite taken from the Milandre cave is 9.87 ± 0.80 °C, while the mean annual surface temperature, that in the case of the Milandre cave correlates well with the cave temperature, was 9.6 ± 0.15 °C, calculated from actual measurements at that time, showing a very good agreement. Formation temperatures of inclusions formed during the last 450 yr are found in a temperature range between 8.4 and 9.6 °C, which corresponds to the calculated average surface temperature. Paleotemperatures can thus be determined within ±1.0 °C.

Glacial-interglacial temperature change in the tropical West Pacific: a comparison of stalagmite-based paleo-thermometers

In the tropics, geochemical records from stalagmites have so far mainly been used to qualitatively reconstruct changes in precipitation, but several new methods to reconstruct past temperatures from stalagmite material have emerged recently: i) liquid–vapor homogenization of fluid inclusion water ii) noble gas concentrations in fluid inclusion water, iii) the partitioning of oxygen isotopes between fluid inclusion water and calcite, and iv) the abundance of the 13C18O16O (‘clumped’) isotopologue in calcite. We present, for the first time, a direct comparison of these four paleo-thermometers by applying them to a fossil stalagmite covering nearly two glacial–interglacial cycles (Marine Isotope Stages (MIS) 12–9) and to two modern stalagmites, all from northern Borneo. The temperature estimates from the different methods agree in most cases within errors for both the old and recent samples; reconstructed formation temperatures of the recent samples match within 2-sigma errors with measured cave temperatures. However, slight but systematic deviations are observed between noble gas and liquid–vapor homogenization temperatures. Whereas the temperature sensitivity of fluid inclusion δ18O and clumped isotopes is currently debated, we find that the calibration of Tremaine et al. (2011) for fluid inclusion δ18O and a synthetic calcite-based clumped isotope calibration (Ziegler et al., in prep.) yield temperature estimates consistent with the other methods. All methods (with the potential exception of clumped isotopes) show excellent agreement on the amplitude of glacial–interglacial temperature change, indicating temperature shifts of 4–5 °C. This amplitude is similar to the amplitude of Mg/Ca-based regional sea surface temperature records, when correcting for sea level driven changes in cave elevation. Our reconstruction of tropical temperature evolution over the time period from 440 to 320 thousand years ago (ka) adds support to the view that climate sensitivity to varying greenhouse forcing is substantial also in the deep tropics.

A Lateglacial archaeological site in the far north-west of Europe at Rubha Port an t-Seilich, Isle of Islay, western Scotland: Ahrensburgian-style artefacts, absolute dating and geoarchaeology

The exact pattern, process and timing of the human re-colonization of northern Europe after the end of the last Ice Age remain controversial. Recent research has provided increasingly early dates for at least pioneer explorations of latitudes above 54°N in many regions, yet the far north-west of the European landmass, Scotland, has remained an unexplained exception to this pattern. Although the recently described Hamburgian artefacts from Howburn and an assemblage belonging to the arch-backed point complex from Kilmelfort Cave have established at least a sporadic human presence during earlier stages of the Lateglacial Interstadial, we currently lack evidence for Younger Dryas/Greenland Stadial 1 (GS-1) activity other than rare stray finds that have been claimed to be of Ahrensburgian affiliation but are difficult to interpret in isolation. We here report the discovery of chipped stone artefacts with technological and typological characteristics similar to those of the continental Ahrensburgian at a locality in western Scotland. A preliminary analysis of associated tephra, pollen and phytoliths, along with microstratigraphic analysis, suggest the artefacts represent one or more episodes of human activity that fall within the second half of GS-1 and the Preboreal period

Designing in caves: using immersive visualisations in design practice

This paper describes a study of the use of immersive Virtual reality technologies in the design of a new hospital. It uses Schön’s concept of reflective practice and video-based methods to analyse the ways design teams approach and employ a full scale 3D immersive environment – a CAVE – in collaborative design work. The analysis describes four themes relating to reflective practice occurring in the setting: orienting to the CAVE technology itself, orienting to the representation of the specific design within the CAVE, activities accounting for, or exploring alternatives within the design for the use and users of the space, and more strategic interactions around how to best represent the design and model to the client within the CAVE setting. The analysis also reveals some unique aspects of design work in this environment. Perhaps most significantly, rather than enhancing or adding to an existing understanding of design through paper based or non-immersive digital representations, it is often acting to challenge or surprise the participants as they experience the immersive, full scale version of their own design.

Patterns of hominin occupation and cultural diversity across the Gebel Akhdar of Northern Libya over the last ~200 kyr

Excavations at Haua Fteah cave in Cyrenaica, Libya, have revealed a cultural sequence that may span the last glacial–interglacial-glacial cycle. The TRANS-NAP project has been re-excavating Haua Fteah and conducting geoarchaeological survey of an ecologically diverse landscape that includes the fertile Gebel Akhdar and littoral, pre-desert, and desert biomes. A major aim of this project is to characterize cultural and environmental changes across the region and correlate the surface archaeology with that from Haua Fteah. To date, 181 sites have been recorded, ranging from the Middle Stone Age (MSA) to Late Stone Age (LSA). Their geographic distribution suggests temporal variation in patterns of hominin habitat preference, with significantly more LSA than MSA sites at higher elevations. The surface archaeology also points to substantial spatiotemporal technological variation within the MSA. These patterns may be explained by both paleoenvironmental change and paleodemographic shifts in the region, resulting in a variety of hominin adaptive responses.

Seasonality of westerly moisture transport in the East Asian summer monsoon and its implications for interpreting precipitation δ18O

East Asian summer monsoon (EASM) rainfall impacts the world's most populous regions. Accurate EASM rainfall prediction necessitates robust paleoclimate reconstructions from proxy data and quantitative linkage to modern climatic conditions. Many precisely dated oxygen isotope records from Chinese stalagmites have been interpreted as directly reflecting past EASM rainfall amount variability, but recent research suggests that such records instead integrate multiple hydroclimatic processes. Using a Lagrangian precipitation moisture source diagnostic, we demonstrate that EASM rainfall is primarily derived from the Indian Ocean. Conversely, Pacific Ocean moisture export peaks during winter, and the moisture uptake area does not differ significantly between summer and winter and is thus a minor contributor to monsoonal precipitation. Our results are substantiated by an accurate reproduction of summer and winter spatial rainfall distributions across China. We also correlate modern EASM rainfall oxygen isotope ratios with instrumental rainfall amount and our moisture source data. This analysis reveals that the strength of the source effect is geographically variable, and differences in atmospheric moisture transport may significantly impact the isotopic signature of EASM rainfall at the Hulu, Dongge, and Wanxiang Cave sites. These results improve our ability to isolate the rainfall amount signal in paleomonsoon reconstructions and indicate that precipitation across central and eastern China will directly respond to variability in Indian Ocean moisture supply.

Timing and nature of the penultimate deglaciation in a high alpine stalagmite from Switzerland

The timing and nature of the penultimate deglaciation, also known as Termination II (T-II), is subject of controversial discussions due to the scarcity of precisely-dated palaeoclimate records. Here we present a new precisely-dated and highly-resolved multi-proxy stalagmite record covering T-II from the high alpine Schafsloch Cave in Switzerland, an area where climate is governed by the North Atlantic. The inception of stalagmite growth at 137.4 ± 1.4 kyr before present (BP) indicates the presence of drip water and cave air temperatures of above 0°C, and is related to a climate-induced change in the thermal state (from cold- to warm-based) of the glacier above the cave. The cessation of stalagmite growth between 133.1 ± 0.7 and 131.9 ± 0.6 kyr BP is most likely related to distinct drop in temperature associated with Heinrich stadial 11. The resumption of stalagmite growth at 131.9 ± 0.6 kyr BP is accompanied by an abrupt increase in temperature and precipitation as indicated by distinct shifts in the oxygen and carbon isotopic composition as well as in trace element concentrations. The mid-point of T-II is around 131.8 ± 0.6 kyr BP in the Schafsloch Cave record is significantly earlier compared to the age of 129.1 ± 0.1 kyr BP in the Sanbao Cave record from China. The different ages between both records can be best explained by the competing effects of insolation and glacial boundary forcing on seasonality and snow cover extent in Eurasia.

Paleoamerican Morphology in the Context of European and East Asian Late Pleistocene Variation: Implications for Human Dispersion Into the New World

Early American crania show a different morphological pattern from the one shared by late Native Americans. Although the origin of the diachronic morphological diversity seen on the continents is still debated, the distinct morphology of early Americans is well documented and widely dispersed. This morphology has been described extensively for South America, where larger samples are available. Here we test the hypotheses that the morphology of Early Americans results from retention of the morphological pattern of Late Pleistocene modern humans and that the occupation of the New World precedes the morphological differentiation that gave rise to recent Eurasian and American morphology. We compare Early American samples with European Upper Paleolithic skulls, the East Asian Zhoukoudian Upper Cave specimens and a series of 20 modern human reference crania. Canonical Analysis and Minimum Spanning Tree were used to assess the morphological affinities among the series, while Mantel and Dow-Cheverud tests based on Mahalanobis Squared Distances were used to test different evolutionary scenarios. Our results show strong morphological affinities among the early series irrespective of geographical origin, which together with the matrix analyses results favor the scenario of a late morphological differentiation of modern humans. We conclude that the geographic differentiation of modern human morphology is a late phenomenon that occurred after the initial settlement of the Americas. Am J Phys Anthropol 144:442-453, 2011. (c) 2010 Wiley-Liss, Inc.

Pleistovultur nevesi gen. et sp nov (Aves: Vulturidae) and the diversity of condors and vultures in the South American Pleistocene

Pleistovultur nevesi, a new genus and species of a large Vulturidae is described from the Upper Pleistocene or beginning of the Holocene, based on a complete and well preserved right tibiotarsus from the Cuvieri cave deposits, one of the hundreds of caves of the Lagoa Santa region in Minas Gerais state, Brazil. Also described here is a distal half of a left tibiotarsus from Gruta dos Brejoes, a cave in Morro do Chapeu, Bahia state, Brazil, which probably belongs to another not-yet-known genus and species of the Vulturidae. The described material, added to prior literature, is proof of the appreciable diversity of the Vulturidae during the Pleistocene in South America.

Assessment the Health Hazard from (222)Rn in Old Metalliferous Mines in San Luis, Argentina

Radon levels in two old mines in San Luis, Argentina, are reported and analyzed. The radiation dose and environmental health risk of (222)Rn concentrations to both guides and visitors were estimated. CR-39 nuclear track detectors were used for this purpose. The values for the (222)Rn concentration at each monitoring site ranged from 0.43 +/- 0.04 to 1.48 +/- 0.12 kBq m(-3) in the Los Cndores wolfram mine and from 1.8 +/- 0.1 to 6.0 +/- 0.5 kBq center dot m(-3) in the La Carolina gold mine, indicating that, in this mine, the radon levels exceed up to four times the action level of 1.5 kBq m(-3) recommended by the International Commission on Radiological Protection. The patterns of the radon transport process revealed that the La Carolina gold mine can be interpreted as a gas confined into a single tube with constant cross-section and air velocity. Patterns of radon activity, taking into account the chimney-effect winds, were used to detect tributary currents of air from shafts or larger fissures along the main adit of the Los Cndores mine, showing that radon can be used as an important tracer of tributary air currents stream out from fissures and smaller voids in the rock of the mine.

Occupational exposure to radon and natural gamma radiation in the La Carolina, a former gold mine in San Luis Province, Argentina

Radon and gamma radiation level measurements were carried out inside the La Carolina mine, one of the oldest gold mining camps of southern South America, which is open for touristic visits nowadays. CR-39 track-etch detectors and thermoluminescent dosimeters of natural CaF(2) and LiF TLD-100 were exposed at 14 points along the mine tunnels in order to estimate the mean (222)Rn concentration and the ambient dose equivalent during the summer season (November 2008 to February 2009). The values for the (222)Rn concentration at each monitoring site ranged from 1.8 +/- 0.1 kBq m(-3) to 6.0 +/- 0.5 kBq m(-3), with a mean value of 4.8 kBq m(-3), indicating that these measurements exceed in about three times the upper action level recommended by ICRP for workplaces. The correlations between radon and gamma radiation levels inside the mine were also investigated. Effective doses due to (222)Rn and gamma rays inside the mine were determined, resulting in negligible values to tourists. Considering the effective dose to the mine tourist guides, values exceeding 20 mSv of internal contribution to the effective doses can be reached, depending on the number of working hours inside the mine. (C) 2009 Elsevier Ltd. All rights reserved.

Timing and structure of the 8.2 kyr BP event inferred from delta(18)O records of stalagmites from China, Oman, and Brazil

Oxygen isotope records of stalagmites from China and Oman reveal a weak summer monsoon event, with a double-plunging structure, that started 8.21 +/- 0.02 kyr B. P. An identical but antiphased pattern is also evident in two stalagmite records from eastern Brazil, indicating that the South American Summer Monsoon was intensified during the 8.2 kyr B. P. event. These records demonstrate that the event was of global extent and synchronous within dating errors of <50 years. In comparison with recent model simulations, it is plausible that the 8.2 kyr B. P. event can be tied in changes of the Atlantic Meridional Overturning Circulation triggered by a glacial lake draining event. This, in turn, affected North Atlantic climate and latitudinal position of the Intertropical Convergence Zone, resulting in the observed low-latitude monsoonal precipitation patterns.

CHRONOLOGICAL DISTRIBUTION OF BRAZILIAN GLYPTODON SP REMAINS: A DIRECT (14)C DATE FOR A SPECIMEN FROM IPORANGA, SAO PAULO, BRAZIL

Glyptodon sp. fossil remains can be found throughout Brazil. However, little information is available about their chronological distribution. With the intention to contribute to this issue, we present, as far as we know, the first direct radiocarbon date for 1 specimen of this genus found in Brazil. The osteoderm MZSP-PV660 found in Abismo do Fossil Cave (SP-145), Iporanga, Sao Paulo, Brazil, was dated by accelerator mass spectrometry at the Beta Analytic Radiocarbon Dating Laboratory. The (14)C date obtained was between 20,680 and 21,370 calibrated years before the present. Unfortunately, the scant (and often imprecise or unreliable) chronological data regarding this species and genus in Brazil and elsewhere in South America precludes a robust comparison among the dates available and the one presented here. Nevertheless, our finding supports the existence of this genus in South America at least until the Last Glacial Maximum.

Blade : um editor de esquemáticos hierárquico voltado à colaboração

Este trabalho apresenta a proposta de um editor de diagramas hierárquico e colaborativo. Este editor tem por objetivo permitir a especificação colaborativa de circuitos através de representações gráficas. O Blade (Block And Diagram Editor), como foi chamado, permite especificações em nível lógico, usando esquemas lógicos simples, bem como esquemas hierárquicos. Ao final da montagem do circuito, a ferramenta gera uma descrição textual do sistema num formato netlist padrão. A fim de permitir especificações em diferentes níveis de abstração, o editor deve ser estendido a outras formas de diagramas, portanto seu modelo de dados deve ter flexibilidade a fim de facilitar futuras extensões. O Blade foi implementado em Java para ser inserido no Cave, um ambiente distribuído de apoio ao projeto de circuitos integrados, através do qual a ferramenta pode ser invocada e acessada remotamente. O Cave disponibiliza um serviço de colaboração que foi incorporado na ferramenta e através do qual o editor suporta o trabalho cooperativo, permitindo que os projetistas compartilhem dados de projeto, troquem mensagens de texto e, de forma colaborativa, construam uma representação gráfica do sistema. Objetivando fundamentar a proposta da nova ferramenta, é apresentado um estudo sobre ferramentas gráficas para especificação de sistemas, mais especificamente sobre editores de esquemáticos. A partir dessa revisão, do estudo do ambiente Cave e da metodologia de colaboração a ser suportada, fez-se a especificação do editor, a partir da qual implementou-se o protótipo do Blade. Além do editor, este trabalho contribuiu para a construção de uma API, um conjunto de classes Java que será disponibilizado no Cave e poderá ser utilizado no desenvolvimento de novas ferramentas. Foram realizados estudos sobre técnicas de projeto orientado a objeto, incluindo arquiteturas de software reutilizáveis e padrões de projeto de software, que foram utilizados na modelagem e na implementação da ferramenta, a fim de garantir a flexibilidade do editor e a reusabilidade de suas classes. Este trabalho também contribui com um estudo de modelagem de primitivas de projeto de sistemas. No modelo orientado a objetos utilizado no editor, podem ser encontradas construções muito utilizadas em diferentes ferramentas de projeto de sistemas, tais como hierarquia de projeto e instanciação de componentes e que, portanto, podem ser reutilizadas para a modelagem de novas ferramentas.

WTROPIC : um gerador automático de macro células CMOS acessível via WWW

Este trabalho apresenta a pesquisa e o desenvolvimento da ferramenta para geração automática de leiautes WTROPIC. O WTROPIC é uma ferramenta para a geração remota, acessível via WWW, de leiautes para circuitos CMOS adequada ao projeto FUCAS e ao ambiente CAVE. O WTROPIC foi concebido a partir de otimizações realizadas na versão 3 da ferramenta TROPIC. É mostrado também, como as otimizações no leiaute do TROPIC foram implementadas e como essas otimizações permitem ao WTROPIC cerca de 10% de redução da largura dos circuitos gerados em comparação ao TROPIC. Como o TROPIC, o WTROPIC é um gerador de macro células CMOS independente de biblioteca. Apresenta-se também, como a ferramenta WTROPIC foi integrada ao ambiente de concepção de circuitos CAVE, as mudanças propostas para metodologia de integração de ferramentas do CAVE que conduzem a uma melhora na qualidade de integração e a padronização das interfaces de usuário e como a síntese física de um leiaute pode ser então realizada remotamente. Dessa maneira, obteve-se uma ferramenta para a concepção de leiautes disponível a qualquer usuário com acesso a internet, mesmo que esse usuário não disponha de uma máquina com elevada capacidade de processamento, normalmente exigido por ferramentas de CAD.