Quantitative fit analysis of orthopedic bone plates : methods, criteria and approach

Studies on quantitative fit analysis of precontoured fracture fixation plates emerged within the last few years and therefore, there is a wide research gap in this area. Quantitative fit assessment facilitates the measure of the gap between a fracture fixation plate and the underlying bone, and specifies the required plate fit criteria. For clinically meaningful fit assessment outcome, it is necessary to establish the appropriate criteria and parameter. The present paper studies this subject and recommends using multiple fit criteria and the maximum distance between the plate and underlying bone as fit parameter for clinically relevant outcome. We also propose the development of a software tool for automatic plate positioning and fit assessment for the purpose of implant design validation and optimization in an effort to provide better fitting implant that can assist proper fracture healing. The fundamental specifications of the software are discussed.

The Australian Nonprofit Sector Legal and Accounting Almanac 2013

INTRODUCTION CASES For a number of years, Professor Myles McGregor-Lowndes, Frances Hannah and Anne Overell have compiled one to two page summaries of cases involving nonprofit organisations and published them on The Australian Centre for Philanthropy and Nonprofit Studies, Developing Your Organisation (DYO) website.1 You can be alerted of new case summaries as they are posted to the DYO website by subscribing to the ACPNS RSS feed or the ACPNS twitter service.2 There were some very significant cases during 2013, such as Commissioner of Taxation v Cancer & Bowel Research Association (see case notes 2.8.2 and 2.8.11), The Hunger Project case which is under appeal, but could change the face of PBI jurisprudence (see case note 2.8.7) while Home Health Pty Ltd retained the PBI status quo but might have been different if appealed (see case note 2.8.8). For sheer interest there is nothing better in my 30 odd years of reading tax and charity judgements than case involving The Study and Prevention of Psychological Diseases Foundation Incorporated (see case note 2.1.1). It even rivals some of the more bizarre cases from the US jurisdiction of which St Joseph Abbey v Castille (case note 2.10.9) is certainly ‘dead centre’. A set of cases which stand out for attention are those involving New Zealand’s Christchurch Cathedral which anyone with responsibility for heritage-listed buildings should study carefully, for implications in relation to their own circumstances. A number of cases summarised in this Almanac are working their way through the appeals process and care should be taken with their application. In addition, some of the cases are from jurisdictions outside Australia, and readers should exercise caution when considering the implications of these cases for Australian law. LEGISLATION The Almanac includes a review of major statutory amendments during 2013, which are relevant to the nonprofit sector in all Australian jurisdictions. Special thanks must go to Nathan MacDonald and the JusticeConnect team for providing legislative updates for Victoria. SPECIAL ISSUES DURING 2013 A number of legal practitioners have contributed articles on significant legal issues facing nonprofit organisations: charitable trusts giving to government entities (Alice Macdougall); workplace bullying (Tim Longwill); and privacy (James Tan and Nina Brewer). WORLD ROUND-UP Major developments from the UK and Ireland (Kerry O’Halloran), Canada (Peter Broder), New Zealand (Michael Gousmett and Susan Barker) and Jamaica (Frances Hannah) are all summarised in a review of a significant part of the common law charity jurisdictions. WHAT DOES 2014 HOLD The final section moves from looking in the rear view mirror to peering out the front windscreen to discern the reform agenda. The view from the windscreen in 2013 was of considerable reform traffic at the Commonwealth level jostling for a place in the parliamentary agenda. This year is quite different with a smaller number of vehicles ahead, but the potential for significant impact.

Sustainable Urban Water Environment : Climate, Pollution and Adaptation

"This multi-disciplinary book provides practical solutions for safeguarding the sustainability of the urban water environment. Firstly, the importance of the urban water environment is highlighted and the major problems urban water bodies face and strategies to safeguard the water environment are explored. Secondly, the diversity of pollutants entering the water environment through stormwater runoff are discussed and modelling approaches for factoring in climate change and future urban and transport scenarios are proposed. Thirdly, by linking the concepts of sustainable urban ecosystems and sustainable urban and transport development, capabilities of two urban sustainability assessment models are demonstrated."--publisher website

Living City 2013 Workshop

Living City 2013 Workshop, as part of a school term’s design-based curriculum connected to the KGSC/QUT Design Excellence Program and run from 11 February – 1 May, 2013, was essentially a three-day place-based urban design immersion workshop program for 25 Year 11 Visual Art and Design Students and 2 Teachers from Kelvin Grove State College (KGSC) held at both Queensland University of Technology (QUT) Gardens Point Campus and The Edge, State Library of Queensland. Mentored by 4 design professionals, 2 tertiary design academics, 2 public artists, and 12 QUT tertiary design students, the workshop explored youth-inspired public space design solutions for the active Brisbane City Council redevelopment site of Queens Wharf Road precinct. As well as the face-to-face workshops, for Living City 2013, an interactive web environment was introduced to enable students to connect with each other and program mentors throughout the course of the program. The workshop, framed within notions of ecological, economic, social and cultural sustainability, aimed to raise awareness of the layered complexity and perspectives involved in the design of shared city spaces and to encourage young people to voice their own concerns as future citizens about the shape and direction of their city. The program commenced with an introductory student briefing by stakeholders and mentors at KGSC on 11 February, an introduction to site appraisal and site visit held at QUT and Queens Wharf Road on 20 February, and a follow up site analysis session on 6 March. Day 1 Workshop on April 17 at the Edge, State Library of Queensland, as part of the Design Minds partnership (http://designminds.org.au/kelvin-grove-state-college-excellence-in-art-design/), focused on mentoring team development of a concept design for a range of selected sites. Two workshops on April 22 and 23 at QUT, to develop these designs and presentation schemes, followed this. The workshop program culminated in a visual presentation of concept design ideas and discussion with a public audience in the Ideas Gallery on The Deck, King George Square during the Brisbane City Council City Centre Master Plan Ideas Fiesta on 1 May, 2013, as referenced in the Ideas Fiesta Wrap-up Report (http://www.brisbane.qld.gov.au/planning-building/planning-guidelines-tools/city-centre-master-plan/city-centre-master-plan-ideas-fiesta). Students were introduced to design methodology, team thinking strategies, the scope of design practices and professions, presentation skills and post-secondary pathways, while participating teachers acquired content and design learning strategies transferable in many other contexts. The program was fully documented on the Living City website (http://www.livingcity.net.au/LC2013x/index.html) and has been recognised by the Brisbane City Council Youth Strategy 2014-2019 as a best practice model for making Brisbane a well-designed, subtropical city.

Design Pressure Test 2013 Workshop

Design Pressure Test 2013 was a full-day intensive design immersion creative event run on Saturday 3 August 2013, at the QUT Faculty of Creative Industries J Block Design Lab Workshop in Brisbane, Australia, for 25 self-selected high-achieving junior and middle school (year 5-9) students, as part of the Queensland Academies ‘Young Scholars’ Program. Facilitated by tertiary interior design, fashion design and industrial design educators, technicians and six tertiary interior design and fashion design students, the workshop explored design process, environmental impact, the material properties and structural integrity of cardboard, construction techniques, and the production and evaluation of furniture design prototypes. This action research study aimed to facilitate an awareness in young people, of the role and scope of design within our society, the environmental ramifications of design decisions, and the value of design thinking skills in generating strategies to solve basic to complex challenges. It also aimed to investigate the value of collaboration between junior and middle school students, tertiary design educators and students and industry professionals in design awareness, and inspiring post-secondary pathways and idea generation for education. During the creative event, students utilised mathematics skills and developed sketching, making, communication, presentation and collaboration skills to improve their design process, while considering social, cultural and environmental opportunities. Through a series of hands-on collaborative design experiments, participants explored in teams of five, the opportunities available using cardboard as a material – inspiring both functional and aesthetic design solutions. Underpinned by the State Library of Queensland Design Minds Website ‘inquire, ideate and implement’ model of design thinking, the experiments culminated in the development of a detailed client brief, the design and fabrication of a furniture item for seating, and then a team presentation of prototypes to a panel of judges from the professions of architecture, interior design and industrial design, viewed also by parents. The final test for structural integrity was measured by the hoisting down of an adult body weight onto the fabricated seat. The workshop was filmed for the television program ‘Totally Wild’ for dissemination nationally (over 200,000 viewing audience) of the value of design and the Design Minds model to a wider target youth audience.

Design Minds Refresh Toolkit

The Design Minds Refresh Toolkit was one of six K7-12 secondary school design toolkits commissioned by the State Library of Queensland (SLQ) Asia Pacific Design Library (APDL), to facilitate the delivery of the Stage 1 launch of its Design Minds online platform (www.designminds.org.au) partnership initiative with Queensland Government Arts Queensland and the Smithsonian Cooper-Hewitt National Design Museum, on June 29, 2012. Design Minds toolkits are practical guides, underpinned by a combination of one to three of the Design Minds model phases of ‘Inquire’, ‘Ideate’ and ‘Implement’ (supported by at each stage with structured reflection), to enhance existing school curriculum and empower students with real life design exercises, within the classroom environment. Toolkits directly identify links to Naplan, National Curriculum, C2C and Professional Standards benchmarks, as well as the student capabilities of successful and creative 21st century citizens they seek to engender through design thinking. Inspired by ideas from a design project for second year Interior Design students at QUT School of Design, this toolkit explores, through five distinct exercises, different design tools and ways to approach the future design of environments (bathrooms) to facilitate the daily washing ritual, while addressing diverse and changing social, cultural, technological and environmental challenges. The Design Minds Refresh Toolkit particularly aims to promote ‘Lateral Thinking’ attitudes and empathy as an approach to create unusual and sustainable solutions to future problems that may affect our daily behavioural routines, and the spaces that facilitate them. More generally, it aims to facilitate awareness in young people, of the role of design in society and the value of design thinking skills in generating strategies to solve basic to complex systemic challenges, as well as to inspire post-secondary pathways and idea generation for education. The toolkit encourages students and teachers to develop sketching, making, communication, presentation and collaboration skills to improve their design process, as well as explore further inquiry (background research) to enhance the ideation exercises. Exercise 1 focuses on the ‘Inquire’ and ‘Ideate’ phases, Exercise 2 and 3 build on ideation skills, and Exercise 4 and 5 concentrate on the ‘Implement’ phase. Depending on the intensity of the focus, the unit of work could be developed over a 4-5 week program (approximately 10-12 x 60 minute lessons/workshops) or as smaller workshops treated as discrete learning experiences. The toolkit is available for public download from http://designminds.org.au/refresh/ on the Design Minds website. Exercise 2 (Other People’s Shoes) and Exercise 3 (The Future Bathroom) of the toolkit were used as content for the inaugural Design Minds Professional Development Workshop on June 28, 2012 to pre-launch the website to Queensland teachers.

Design Minds The Big Picture Toolkit

The Design Minds The Big Picture Toolkit was one of six K7-12 secondary school design toolkits commissioned by the State Library of Queensland (SLQ) Asia Pacific Design Library (APDL), to facilitate the delivery of the Stage 1 launch of its Design Minds online platform (www.designminds.org.au) partnership initiative with Queensland Government Arts Queensland and the Smithsonian Cooper-Hewitt National Design Museum, on June 29, 2012. Design Minds toolkits are practical guides, underpinned by a combination of one to three of the Design Minds model phases of ‘Inquire’, ‘Ideate’ and ‘Implement’ (supported by at each stage with structured reflection), to enhance existing school curriculum and empower students with real life design exercises, within the classroom environment. Toolkits directly identify links to Naplan, National Curriculum, C2C and Professional Standards benchmarks, as well as the student capabilities of successful and creative 21st century citizens they seek to engender through design thinking. Inspired by the Unlimited: Designing for the Asia Pacific Generation Workshop 2010 (http://eprints.qut.edu.au/47762/), this toolkit explores, through three distinct exercises, ‘design for the other 90%’, addressing tools and approaches to diverse and changing social, cultural, technological and environmental challenges. The Design Minds The Big Picture Toolkit challenges students to be active agents for change and to think creatively and optimistically about solutions to future global issues that deliver social, economic and environmental benefits. More generally, it aims to facilitate awareness in young people, of the role of design in society and the value of design thinking skills in generating strategies to solve basic to complex systemic challenges, as well as to inspire post-secondary pathways and idea generation for education. The toolkit encourages students and teachers to develop sketching, making, communication, presentation and collaboration skills to improve their design process, as well as explore further inquiry (background research) to enhance the ideation exercises. Exercise 1 focuses on the ‘Inquire’ phase, Exercise 2 the ‘Inquire’ and ‘Ideate’ phases, and Exercise 3 concentrates on the ‘Implement’ phase. Depending on the intensity of the focus, the unit of work could be developed over a 4-5 week program (approximately 4-6 x 60 minute lessons/workshops) or as smaller workshops treated as discrete learning experiences. The toolkit is available for public download from http://designminds.org.au/the-big-picture/ on the Design Minds website.

Design Minds Tomorrow's Classroom Toolkit

The Design Minds Tomorrow’s Classroom Toolkit was one of six K7-12 secondary school design toolkits commissioned by the State Library of Queensland (SLQ) Asia Pacific Design Library (APDL), to facilitate the delivery of the Stage 1 launch of its Design Minds online platform (www.designminds.org.au) partnership initiative with Queensland Government Arts Queensland and the Smithsonian Cooper-Hewitt National Design Museum, on June 29, 2012. Design Minds toolkits are practical guides, underpinned by a combination of one to three of the Design Minds model phases of ‘Inquire’, ‘Ideate’ and ‘Implement’ (supported by at each stage with structured reflection), to enhance existing school curriculum and empower students with real life design exercises, within the classroom environment. Toolkits directly identify links to Naplan, National Curriculum, C2C and Professional Standards benchmarks, as well as the student capabilities of successful and creative 21st century citizens they seek to engender through design thinking. This toolkit explores, through four distinct exercises, different design tools and ways to approach the future design of environments (classrooms/schools) to facilitate the Reggio Emilia philosophy of learning, while addressing diverse and changing social, cultural, technological and environmental challenges. The Design Minds Tomorrow’s Classroom Toolkit encourages students to explore architecture and interior design, and to think about their (life-long) learning as a product of inspiring interactions with people and the environments around them, and that their potential role in contributing to both delightful and functional design solutions requires a deep understanding of the user experience. More generally, it aims to facilitate awareness in young people, of the role of design in society and the value of design thinking skills in generating strategies to solve basic to complex systemic challenges, as well as to inspire post-secondary pathways and idea generation for education. The toolkit encourages students and teachers to develop sketching, making, communication, presentation and collaboration skills to improve their design process, as well as explore further inquiry (background research) to enhance the ideation exercises. Exercise 1 focuses on the ‘Inquire’ and ‘Ideate’ phases, Exercise 2 on the ‘Inquire’, Exercise 3 builds on ideation skills, and Exercise 4 concentrates on the ‘Implement’ phase. Depending on the intensity of the focus, the unit of work could be developed over a 2-5 week program (approximately 4-10 x 60 minute lessons/workshops) or as smaller workshops treated as discrete learning experiences. The toolkit is available for public download from http://designminds.org.au/tomorrows-classroom/ on the Design Minds website. This toolkit inspired the authorship and facilitation of a 2-day design workshop entitled Learning Environment 2050 at John Paul College, Daisy Hill, Brisbane on the 15-16 August 2013. 120 Grade 7 students and their teachers, under the mentorship of two design academics, 3 QUT design students and a professional architect, as part of a QUT School of Design Project Week community engagement activity, explored the formulation of a participatory design brief for the redesign of the school’s Wesley Precinct (including classrooms, a sustainable farm and recreation areas).

Hydrogen evolution by a metal-free electrocatalyst

Electrocatalytic reduction of water to molecular hydrogen via the hydrogen evolution reaction may provide a sustainable energy supply for the future, but its commercial application is hampered by the use of precious platinum catalysts. All alternatives to platinum thus far are based on nonprecious metals, and, to our knowledge, there is no report about a catalyst for electrocatalytic hydrogen evolution beyond metals. Here we couple graphitic-carbon nitride with nitrogen-doped graphene to produce a metal-free hybrid catalyst, which shows an unexpected hydrogen evolution reaction activity with comparable overpotential and Tafel slope to some of well-developed metallic catalysts. Experimental observations in combination with density functional theory calculations reveal that its unusual electrocatalytic properties originate from an intrinsic chemical and electronic coupling that synergistically promotes the proton adsorption and reduction kinetics.

Integrated approach for diagnostics and prognostics of HP LNG pump based on health state probability estimation

Effective machine fault prognostic technologies can lead to elimination of unscheduled downtime and increase machine useful life and consequently lead to reduction of maintenance costs as well as prevention of human casualties in real engineering asset management. This paper presents a technique for accurate assessment of the remnant life of machines based on health state probability estimation technique and historical failure knowledge embedded in the closed loop diagnostic and prognostic system. To estimate a discrete machine degradation state which can represent the complex nature of machine degradation effectively, the proposed prognostic model employed a classification algorithm which can use a number of damage sensitive features compared to conventional time series analysis techniques for accurate long-term prediction. To validate the feasibility of the proposed model, the five different level data of typical four faults from High Pressure Liquefied Natural Gas (HP-LNG) pumps were used for the comparison of intelligent diagnostic test using five different classification algorithms. In addition, two sets of impeller-rub data were analysed and employed to predict the remnant life of pump based on estimation of health state probability using the Support Vector Machine (SVM) classifier. The results obtained were very encouraging and showed that the proposed prognostics system has the potential to be used as an estimation tool for machine remnant life prediction in real life industrial applications.

Fault diagnosis of low speed bearing based on acoustic emission signal and multi-class relevance vector machine

This study presents an acoustic emission (AE) based fault diagnosis for low speed bearing using multi-class relevance vector machine (RVM). A low speed test rig was developed to simulate the various defects with shaft speeds as low as 10 rpm under several loading conditions. The data was acquired using anAEsensor with the test bearing operating at a constant loading (5 kN) andwith a speed range from20 to 80 rpm. This study is aimed at finding a reliable method/tool for low speed machines fault diagnosis based on AE signal. In the present study, component analysis was performed to extract the bearing feature and to reduce the dimensionality of original data feature. The result shows that multi-class RVM offers a promising approach for fault diagnosis of low speed machines.

Corporate sustainability reporting of major commercial banks in line with GRI : Bangladesh evidence

Purpose – This paper aims to examine the tendencies of sustainability reporting by major commercial banks in Bangladesh in comparison with global sustainability reporting indicators outlined in the GRI framework together with banks' predilection toward reporting 16 GRI financial service sector (FSS) specific performance indicators. Design/methodology/approach – Based on the GRI G3 guidelines, the paper investigated banks' reporting in five broad areas of sustainability, such as environment, labour practices and decent works, product responsibility, human rights and society. The 2008/2009 annual reports of 12 major commercial banks listed on Dhaka stock exchange were analysed and coded using a content-based technique. Findings – The results show that information on society is addressed most extensively with regard to extent of reporting. This is followed by the disclosures prepared on decent works and labour practices and environmental issues. Furthermore, the disclosures of product responsibility information and the information for human rights are rather scarce in banks' reporting; on the subject of FSS-specific disclosures, only seven items out of 16 are disclosed by all sample banks. Research limitations/implications – The findings of the study indicate that Bangladeshi commercial banks' social disclosures could develop in this style to become more holistic and over time (in association with the country's central bank involvement) to resemble a type of structured reporting to the point where they are properly labelled per se. Originality/value – The study contributes to the social disclosure literature, in particular in a developing countries banking sector context, seeing as it disseminates evidence of the standing on social disclosures practices at the level of GRI with developing countries' banks data.

Brave New World of Health

"Within contemporary society the meaning of 'health' is surprisingly unstable. Guiding principles that once seemed self-evident have been challenged by new social, scientific and economic forces. This book argues that the foundational terms and concepts, which form the basic building blocks of dialogue about health, are now in flux. While the forces in play differ, and the pace of change is varied, there is now a 'brave new world' of health which characterises policy debate about health (and illness or disability). This permeates even the more narrow technical issues within clinical medicine, the law and medical science. This construction and reconstruction of health has important implications for the development of law and policy. The book draws on international and local experts to explore these issues. It opens with consideration of the economic and social forces of 'globalisation' - the macro level forces which now shape the 'lived realities' of health for the world's people. This is then contextualised through a series of detailed 'case studies' of more localised examples including; pharmaceuticals, preimplantation genetic diagnosis, body modification, abortion, anorexia and post-traumatic stress disorder. The book also interrogates the way modern health research influences public conceptions of health. Across these issues the book canvasses the social forces at work in the construction of health, disability and illness in shaping our understandings of such concepts by the public, by individuals, by the courts, and by international bodies. Brave New World of Health is an important contribution to advancing that understanding."--Publisher's website.

Enhancing student learning in the workplace through developing the leadership capabilities of clinical supervisors in the nursing discipline

The purpose of this project was to build the leadership capacity of clinical supervisors in the nursing discipline by developing, implementing and systematically embedding a leadership model into the structure and practice of student supervision. The University worked in partnership with three major metropolitan hospitals in Queensland to develop a framework and professional development program incorporating leadership and clinical supervision. The Leadership and Clinical Education (LaCE) program consisted of two structured workshops complemented by individual personal development projects undertaken by participants. Participants were supported in these activities with a purpose-built website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicated that the approach was highly valued by participants, as it promoted useful peer dialogue, sharing of experiences and personal development in relation to assisting leadership development and student learning in the workplace. The LaCE program provides an ideal springboard for introducing the development of welltrained leaders into the clinical workplace. The resources developed have the potential to provide ongoing support for clinical supervisors to improve the learning of undergraduate nursing student. The challenge will be to achieve continued innovation within clinical education through sustainable leadership programs.

Promoting resilience and effective workplace functioning in international students in health courses

The purpose of this project was to improve the quality of the learning experiences of international students in nursing, public health and nutrition and dietetics, both at university and in the clinical setting. The university worked in partnership with three major metropolitan health care facilities/services in Queensland to develop a framework and resources designed to promote quality work-integrated learning experiences for international students and clinical supervisory staff. The Resilience in International Student Education (RISE) model consists of student and staff workshops complemented by a purpose-built Cultural Connections for Learning (CCL) website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicate that the approach is highly valued by participants as it promotes useful dialogue, sharing of experiences and greater understanding regarding quality learning experiences for international students in the health workplace. It provides an ideal springboard for promoting collaboration between international students and clinical supervisors in the workplace. The resources developed have the potential to enhance student learning as well as clinical teaching. The challenge will be to achieve continued progress within international student education through the development of sustainable strategies to embed the program within the context of individual curricula.