Malaria control in an agro-industrial settlement of Rondônia (Western Amazon Region, Brazil)

A malaria control pilot project was developed in the Urupá agro-industrial farm that is situated in the State of Rondônia (Western Amazon Region, Brazil). Around 180 inhabitants had been surveyed for the past five years. The control measures were based on (1) training a community agent to perform on the spot microscopical diagnosis of malaria and to treat the uncomplicated cases of malaria; (2) limiting the use of insecticides to a short period before the high transmission season. This resulted in a significant reduction in the time between the onset of clinical symptoms and specific chemotherapy which fell from 3.5 to 1.3 days. In relation to the previous three reference years the total number of malaria cases was reduced to 50% in the first year and to 25% in the second year. The introduction of these measures coincided with pronounced reduction in the frequency of Plasmodium falciparum infections but this was less marked for P. vivax infections. In the second year of the pilot experiment there was no P. falciparum transmission on the farm. During the last decade there was a general decrease in the endemicity of malaria in the State of Rondônia. The linear regression coefficient values indicate that the decline was more pronounced in Urupá than in the general municipality and that the falciparum malaria API in Urupá farm is significantly lower than in the general municipality of Candeias were the farm is situated.

Prevención, seguimiento y evaluación de la descontaminación de percloroetileno en suelo y aguas subterráneas en un terreno industrial

La contaminación de suelos y aguas subterráneas es uno de los problemas ambientales más extendidos en gran parte de los terrenos industriales de Cataluña. En este proyecto se ha analizado el proceso de gestión de la contaminación: caracterización, remediación y seguimiento de la descontaminación en suelos y aguas subterráneas por un caso de afección por organoclorados (percloroetileno) y otros contaminantes (hidrocarburos, selenio y cromo) en un emplazamiento industrial situado en una zona agroforestal (superficie de 81.462 m2). A partir de la implantación en la empresa del sistema de gestión ISO 14.001 en 1.996, se abrieron diferentes proyectos de gestión para los posibles contaminantes. Por las mismas fechas, también se detectó una afección por selenio en aguas subterráneas, ajena a la empresa de estudio. Por el momento, el único contaminante que ha requerido de un proceso de descontaminación ha sido el percloroetileno. En suelos se emplea el método “soil vapor extraction” y en aguas subterráneas el método “airstripping”. Finalmente, se ha llevado a cabo una comparación de los costes reales derivados del proceso de descontaminación del percloroetileno en contra de los costes que se hubiesen derivado la implantación de medidas de prevención de la contaminación. El resultado de la valoración indica que la descontaminación de éste compuesto requiere de una inversión económica importante, unas 10 veces más elevada que los costes derivados de las medidas de prevención.

Canvi tecnològic i desenvolupament econòmic durant la segona revolució industrial: la transferència tecnològica del sector tèxtil entre Anglaterra i Catalunya

Projecte de recerca elaborat a partir d’una estada a la University of Sussex, Gran Bretanya, entre març i juliol del 2008. L’estada ha estat centrada en obtenir fonts documentals primàries, per avançar en el projecte d’investigació sobre la transferència de tecnologia entre Catalunya i Anglaterra durant la Segona Revolució Industrial. Això ha estat possible gràcies a la consulta de les patents britàniques (Business & Intellectual Property Centre at the British Library). Així mateix, l’obtenció dels recursos documentals especialitzats de diverses biblioteques de referència situades al campus de la University of Sussex (Keith Pavitt Libray (SPRU), Library of Sussex, British Library of Development Studies) i a Ruddignton Framework Knitters’ Library a Nottingham han estat fonamentals, tal i com es pot veure en la relació detallada que es presenta.

A Proportional Approach to Bankruptcy Problems with a guaranteed minimum

In a distribution problem, and specfii cally in bankruptcy issues, the Proportional (P) and the Egalitarian (EA) divisions are two of the most popular ways to resolve the conflict. The Constrained Equal Awards rule (CEA) is introduced in bankruptcy literature to ensure that no agent receives more than her claim, a problem that can arise when using the egalitarian division. We propose an alternative modi cation, by using a convex combination of P and EA. The recursive application of this new rule finishes at the CEA rule. Our solution concept ensures a minimum amount to each agent, and distributes the remaining estate in a proportional way. Keywords: Bankruptcy problems, Proportional rule, Equal Awards, Convex combination of rules, Lorenz dominance. JEL classi fication: C71, D63, D71.

A New Approach for Bounding Awards in Bankruptcy Problems

The solution for the ‘Contested Garment Problem’, proposed in the Babylonic Talmud, suggests that each agent should receive at least some part of the resources whenever the demand overcomes the available amount. In this context, we propose a new method to define lower bounds on awards, an idea that has underlied the theoretical analysis of bankruptcy problems from its beginning (O’Neill, 1982) to present day (Dominguez and Thomson, 2006). Specifically, starting from the fact that a society establishes its own set of ‘Commonly Accepted Equity Principles’, our proposal ensures to each agent the smallest amount she gets according to all the admissible rules. As in general this new bound will not exhaust the estate, we analyze its recursive application for different sets of equity principles. Keywords: Bankruptcy problems, Bankruptcy rules, Lower bounds, Recursive process

Use of quantum dots in aqueous solution to detect blood fingermarks on non-porous surfaces.

A new and original reagent based on the use of highly fluorescent cadmium telluride (CdTe) quantum dots (QDs) in aqueous solution is proposed to detect weak fingermarks in blood on non-porous surfaces. To assess the efficiency of this approach, comparisons were performed with one of the most efficient blood reagents on non-porous surfaces, Acid Yellow 7 (AY7). To this end, four non-porous surfaces were studied, i.e. glass, transparent polypropylene, black polyethylene, and aluminium foil. To evaluate the sensitivity of both reagents, sets of depleted fingermarks were prepared, using the same finger, initially soaked with blood, which was then successively applied on the same surface without recharging it with blood or latent secretions. The successive marks were then cut in halves and the halves treated separately with each reagent. The results showed that QDs were equally efficient to AY7 on glass, polyethylene and polypropylene surfaces, and were superior to AY7 on aluminium. The use of QDs in new, sensitive and highly efficient latent and blood mark detection techniques appears highly promising. Health and safety issues related to the use of cadmium are also discussed. It is suggested that applying QDs in aqueous solution (and not as a dry dusting powder) considerably lowers the toxicity risks.

Implementació del Sistema SAP R/3 mitjançant metodologia ASAP a una organització de caràcter industrial

Aquest treball ha de permetre a l'enginyer encarregat d'iniciar un procés de selecció d'una aplicació de gestió integral i de formar part de la futura implementació d'un sistema SAP R/3, adquirir els coneixements necessaris per a poder iniciar la implementació coneixent les possibilitats i les limitacions del sistema i l'estructura seguida en la implementació, a més dels recursos que hauran d?assignar-s?hi.

Interfície de control de una línia industrial automatitzada

Estudi seriós sobre les interfícies gràfiques destinades al sector industrial. En aquest sentit, s'analitza el perfil d'usuari o usuaris més freqüent en aquest sector (les seves característiques i les seves necessitats), es presenten i es descriuen diverses pautes de disseny i diversos elements gràfics que compleixen una sèrie de requisits predefinits, es procedeix a fer un muntatge d'exemple presentant una sèrie de pantalles (se n'explica i justifica el funcionament) i, per acabar, es proposa un mètode per a fer la validació del disseny, mètode que pot comportar modificacions sobre el disseny inicial.

Portal de Licitación Industrial

Un portal comunitari configurat de tal manera que asseguri el flux, la privadesa i confidencialitat de la informació. Les eines del portal no són res de nou: Fòrum públic i privat, gestió de fitxers, flux d'informació, calendari d'esdeveniments i configuracions de grups (i.g. Proveïdors de confiança); la novetat està en l'enfocament.

Speciation of antimony (III) and antimony (V) using hydride generation for meglumine antimoniate pharmaceutical formulationsquality control

The pentavalent antimonies, mainly the meglumine antimoniate, are recommends as first-choice medicines for leishmaniasis therapy. In this work we described the development of formulations of meglumine antimoniate injectable medication, as well as the analytical methodology used in the selective determination of Sb(III) and Sb(Total) by hydride generation - inductively coupled plasma atomic emission spectrometry (HG-ICP-AES) and ICP-AES, respectively. On that purpose the analytical methodology was developed focusing on the HG-ICP-AES technique. The formulations using propylene glycol/water as vehicles in a 20:80 proportion were more appropriate for subsequent use in industrial scale. These formulations also showed a lower variation on Sb(III) percentage, no need of buffer solution to stabilize the formulation and no influence of the autoclaving in the quality of the product. The results of the development of the analytical methodology point out the proposed method as an efficient alternative for the determination of Sb(III) in the presence of large quantities of Sb(V) in injectable solutions of meglumine antimoniate, in a selective, linear, accurate and precise manner. In addition, the method showed a low limit of quantification, less interference of the matrix, and more resilience than batch techniques proposed in the Brazilian Pharmacopeia.

Nous processos i formes de creixement urbà: el cas del districte industrial de Montebelluna a Itàlia

This article analyses the spatial organization of Montebelluna's industrial district (Italy) as an exemple of the dinamics of urbanization phenomenon in small urban areas. The study is divided in two parts: in the first one I present the social organisation's model of production named «industrial district» and its relation with the space, which is characterizeded by the rising of diffused urbanization settlements; in the second part I try to verify some explanatory factors pointed out by different autors in this specific area with an historical analysis of processes point of view. The diffused organisation of economic and housing activity show a change in the urban morphology