The genetic content of chromosomal inversions across a wide latitudinal gradient

There is increasing evidence regarding the role of chromosomal inversions in relevant biological processes such as local adaptation and speciation. A classic example of the adaptive role of chromosomal polymorphisms is given by the clines of inversion frequencies in Drosophila subobscura, repeatable across continents. Nevertheless, not much is known about the molecular variation associated with these polymorphisms. We characterized the genetic content of ca. 600 individuals from nine European populations following a latitudinal gradient by analysing 19 microsatellite loci from two autosomes (J and U) and the sex chromosome (A), taking into account their chromosomal inversions. Our results clearly demonstrate the molecular genetic uniformity within a given chromosomal inversion across a large latitudinal gradient, particularly from Groningen (Netherlands) in the north to Málaga (Spain) in the south, experiencing highly diverse environmental conditions. This low genetic differentiation within the same gene arrangement across the nine European populations is consistent with the local adaptation hypothesis for th evolutionof chromosomal polymorphisms. We also show the effective role of chromosomal inversions in maintaining different genetic pools within these inverted genomic regions even in the presence of high gene flow. Inversions represent thus an important barrier to gene flux and can help maintain specific allelic combinations with positive effects on fitness. Consistent patterns of microsatellite allele-inversion linkage disequilibrium particularly in loci within inversions were also observed. Finally, we identified areas within inversions presenting clinal variation that might be under selection.

Epilepsy priorities in Europe: A report of the ILAE-IBE Epilepsy Advocacy Europe Task Force.

The European Forum on Epilepsy Research (ERF2013), which took place in Dublin, Ireland, on May 26-29, 2013, was designed to appraise epilepsy research priorities in Europe through consultation with clinical and basic scientists as well as representatives of lay organizations and health care providers. The ultimate goal was to provide a platform to improve the lives of persons with epilepsy by influencing the political agenda of the EU. The Forum highlighted the epidemiologic, medical, and social importance of epilepsy in Europe, and addressed three separate but closely related concepts. First, possibilities were explored as to how the stigma and social burden associated with epilepsy could be reduced through targeted initiatives at EU national and regional levels. Second, ways to ensure optimal standards of care throughout Europe were specifically discussed. Finally, a need for further funding in epilepsy research within the European Horizon 2020 funding programme was communicated to politicians and policymakers participating to the forum. Research topics discussed specifically included (1) epilepsy in the developing brain; (2) novel targets for innovative diagnostics and treatment of epilepsy; (3) what is required for prevention and cure of epilepsy; and (4) epilepsy and comorbidities, with a special focus on aging and mental health. This report provides a summary of recommendations that emerged at ERF2013 about how to (1) strengthen epilepsy research, (2) reduce the treatment gap, and (3) reduce the burden and stigma associated with epilepsy. Half of the 6 million European citizens with epilepsy feel stigmatized and experience social exclusion, stressing the need for funding trans-European awareness campaigns and monitoring their impact on stigma, in line with the global commitment of the European Commission and with the recommendations made in the 2011 Written Declaration on Epilepsy. Epilepsy care has high rates of misdiagnosis and considerable variability in organization and quality across European countries, translating into huge societal cost (0.2% GDP) and stressing the need for cost-effective programs of harmonization and optimization of epilepsy care throughout Europe. There is currently no cure or prevention for epilepsy, and 30% of affected persons are not controlled by current treatments, stressing the need for pursuing research efforts in the field within Horizon 2020. Priorities should include (1) development of innovative biomarkers and therapeutic targets and strategies, from gene and cell-based therapies to technologically advanced surgical treatment; (2) addressing issues raised by pediatric and aging populations, as well as by specific etiologies and comorbidities such as traumatic brain injury (TBI) and cognitive dysfunction, toward more personalized medicine and prevention; and (3) translational studies and clinical trials built upon well-established European consortia.

Nanoantenna enhanced emission of lightharvesting complex 2: the role of resonance, polarization, and radiative and non-radiative rates

Nanoantennae show potential for photosynthesis research for two reasons; first by spatially confining light for experiments which require high spatial resolution, and second by enhancing the photon emission of single light-harvesting complexes. For effective use of nanoantennae a detailed understanding of the interaction between the nanoantenna and the light-harvesting complex is required. Here we report how the excitation and emission of multiple purple bacterial LH2s (light-harvesting complex 2) are controlled by single gold nanorod antennae. LH2 complexes were chemically attached to such antennae, and the antenna length was systematically varied to tune the resonance with respect to the LH2 absorption and emission. There are three main findings. (i) The polarization of the LH2 emission is fully controlled by the resonant nanoantenna. (ii) The largest fluorescence enhancement, of 23 times, is reached for excitation with light at λ = 850 nm, polarized along the long antenna-axis of the resonant antenna. The excitation enhancement is found to be 6 times, while the emission efficiency is increased 3.6 times. (iii) The fluorescence lifetime of LH2 depends strongly on the antenna length, with shortest lifetimes of [similar]40 ps for the resonant antenna. The lifetime shortening arises from an 11 times resonant enhancement of the radiative rate, together with a 2–3 times increase of the non-radiative rate, compared to the off-resonant antenna. The observed length dependence of radiative and non-radiative rate enhancement is in good agreement with simulations. Overall this work gives a complete picture of how the excitation and emission of multi-pigment light-harvesting complexes are influenced by a dipole nanoantenna.

The impact of bioavailability limitations on microbial stable isotope fractionation in a multiphase system

Stable isotope fractionation analysis of contaminants is a promising method for assessing biodegradation of contaminants in natural systems. However, standard procedures to determine stable isotope fractionation factors, so far, neglect the influence of pollutant bioavailability on stable isotope fractionation. On a microscale, bioavailability may vary due to the spatio-temporal variability of local contaminant concentrations, limited effective diffusivities of the contaminants and cell densities, and thus, the pollutant supply might not meet the intrinsic degradation capacity of the microorganisms. The aim of this study was to demonstrate the effect of bioavailability on the apparent stable isotope fractionation, using a multiphase laboratory setup. The data gained show that the apparent isotope fractionation factors observed during biodegradation processes depend on the amount of biomass and/or the rate of toluene mass transfer from a second to the aqueous phase. They indicate that physico-chemical processes need to be taken into account when stable isotope fractionation analysis is used for the quantification of environmental contaminant degradation.

Cumulative Costs of Caries Prevention and Treatment in Children - with Special Reference to Work Division and Cohort Effect

Lapsen karieshoidon kustannuskertymän muutokset ja karieshoidon toimintakäytäntöjen yhteys kustannuksiin Tutkimuksen tavoitteena oli mitata terveyskeskuksessa hoidettavien lasten karieshoidon kumulatiivisia kustannuksia ja verrata niitä kahden erilaisen toimintatavan välillä. Lisäksi tarkasteltiin lasten hampaiden terveyttä. Tutkimus tehtiin julkisen palvelutuottajan näkökulmasta. Tutkimusaineisto kerättiin Kemin ja Tornion terveyskeskusten suun terveydenhuollon potilaskertomuksista. Kemin kohortit 1980, 1983 ja 1986 (n = 600) ja Tornion kohortit 1980 ja 1992 (n = 400) edustivat perinteistä ja Kemin kohortit 1989, 1992 ja 1995 (n = 600) uutta toimintatapaa työnjaon ja ehkäisyn ajoituksen suhteen. Kohortteja ja kaupunkeja verrattiin hampaiden terveyden (dmft/DMFT = 0 ja dmft ja DMFT keskiarvot 5 ja 12 vuoden iässä) ja voimavarojen käytön suhteen. Panoskäyttö johdettiin käyntimäärien avulla laskennallisen työajan kautta. Kustannuskertymät muodostettiin käyttämällä henkilöstömenoista laskettuja suorittajakohtaisia yksikkökustannuksia. Panoskäytön ja yksikkökustannusten kautta muodostettiin kustannuskertymät. Kustannusten ja terveysvaikutusten suhteita arvioitiin kustannus-vaikuttavuusanalyysissä. Suuhygienistien työpanosta hyödyntävällä varhaisen ehkäisyn toimintamallilla saavutettiin vähäisemmin kustannuksin alle kouluiässä parempi ja kouluiässä yhtä hyvä hammasterveys kuin perinteisellä, enemmän hammaslääkärien työpanokseen perustuvalla tavalla. Karieksen hoitoon liittyvien käyntien määrä oli nuorimmissa syntymävuosikohorteissa pienempi kuin vanhimmissa kohorteissa. Käynnit hammaslääkärissä vähenivät eniten. Toimintatavalla oli merkittävä vaikutus lapsen karieshoidon kokonaiskustannuksiin. Herkkyysanalyysin mukaan karieshoidon kustannukset olivat työnjakoa hyödyntämällä kolmanneksen pienemmät, kuin jos hoidon suorittajana olisi ollut ainoastaan hammaslääkäri-hoitaja työpari. Lasten karieshoidon kustannusvaikuttavuus kohentui molemmissa terveyskeskuksissa nuoremmissa kohorteissa vanhempiin verrattuna. Suun terveydenhuollon potilaskertomuksia olisi hyödynnettävä toiminnan kehittämisessä. Varhaisen ehkäisyn avulla voitaisiin kaikkien suun terveydenhuollon ammattihenkilöiden työpanos kohdentaa kustannustehokkaasti.

The effect of microfibrillated cellulose addition on drying shrinkage and dimensional stability of wood-free paper

Microfibrillated cellulose (MFC) is known to enhance strength properties of paper. Improved strength usually means increased bonding which is strongly connected to dimensional instability of paper. Dimensional instability is due to changes in moisture content of paper; when paper is moistened it expands and when dried, it shrinks. Hygroexpansion is linked to end-use problems and excessive drying shrinkage consumes strength potential. Effective use of materials requires controlling of these phenomena. There isn’t yet data concerning dimensional stability of papers containing MFC which restricts wider use of MFC. Main objective of the work was to evaluate dimensional stability of wood-free paper containing different amounts of MFC. Sheets were dried with different methods to see how drying strains effected on drying shrinkage and hygroexpansion. Also tensile strength was measured to find out the effect of MFC. Results were compared to sheets containing kraft fines and in some test points cationic starch was used alongside with MFC. MFC increased the dimensional instability of freely dried sheets. As the amounts of MFC increased the effects on dimensional stability became more severe. However the fineness of MFC didn’t play any important role. Both hygroexpansion and drying shrinkage were decreased with cationic starch addition. Prevention of drying shrinkage over powered the effects of additives on hygroexpansion. Tensile strength improved up till 7 % addition amount which could be set as the upper limit of MFC addition when paper preparation and tensile strength are concerned.

LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS

The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone automated analytical systems at low cost. Among the areas that can benefit from this approach are the analysis of industrial products and effluents and environmental analysis. In this work, a multi-pumping flow system is proposed for the determination of phosphorus in effluents and polluted water samples. The system employs photometric detection based on the formation of molybdovanadophosphoric acid, and the fluidic circuit is built using three solenoid micropumps. The detection is implemented with a low cost LED-photodiode photometric detection system and the whole system is controlled by an open-source Arduino Uno microcontroller board. The optimization of the timing to ensure the color development and the pumping cycle is discussed for the proposed implementation. Experimental results to evaluate the system behavior are presented verifying a linear relationship between the relative absorbance and the phosphorus concentrations for levels as high as 50 mg L-1.

Hitsaustoiminnan käynnistäminen pk-alihankintakonepajassa

Tämä diplomityö on tehty HT Laser Oy:n Vieremän tehtaan hitsaustoiminnan käynnistämisen yhteydessä. Diplomityön tavoitteena oli hitsaustoiminnan käynnistämisen kustannusten minimointi ja hitsattavien tuotteiden myynti- ja valmistusprosessin luominen. Työn teoriaosassa on esitelty hitsauslaitteistolle asetettavia vaatimuksia, hitsauskustannuksiin vaikuttavia tekijöitä, tuotantojärjestelmiä, tuotannon ohjausmenetelmiä, laadunhallintaa, henkilöstöasioita, osavalmistusta, hitsauksen hinnoittelua ja tilauskäsittelyä. Ensisijaisesti työssä on tavoiteltu sujuvan ja tuloksellisen tilaus/tarjouskäsittelyprosessin luomista. Tämä on nähty edellytyksenä ongelmattomalle tuotannolle ja hyvälle toimitusvarmuudelle. Työssä on luotu malli tarjousvaiheessa läpikäytävälle esikatselmukselle, jota on esitelty kahden case -esimerkin avulla. Case -esimerkeissä on käsitelty myös tuotteiden valmistukseen ja hinnoitteluun liittyviä asioita ja ongelmia sekä näiden ratkaisuja.

Description of epidemics of coffee rust with neural networks

The objective of this paper was to evaluate the potential of neural networks (NN) as an alternative method to the basic epidemiological approach to describe epidemics of coffee rust. The NN was developed from the intensities of coffee (Coffea arabica) rust along with the climatic variables collected in Lavras-MG between 13 February 1998 and 20 April 2001. The NN was built with climatic variables that were either selected in a stepwise regression analysis or by the Braincel® system, software for NN building. Fifty-nine networks and 26 regression models were tested. The best models were selected based on small values of the mean square deviation (MSD) and of the mean prediction error (MPE). For the regression models, the highest coefficients of determination (R²) were used. The best model developed with neural networks had an MSD of 4.36 and an MPE of 2.43%. This model used the variables of minimum temperature, production, relative humidity of the air, and irradiance 30 days before the evaluation of disease. The best regression model was developed from 29 selected climatic variables in the network. The summary statistics for this model were: MPE=6.58%, MSE=4.36, and R²=0.80. The elaborated neural networks from a time series also were evaluated to describe the epidemic. The incidence of coffee rust at four previous fortnights resulted in a model with MPE=4.72% and an MSD=3.95.

A study on the inhibition of mild steel corrosion in hydrochloric acid by pyridoxol hydrochloride

The inhibition of the corrosion of mild steel in 2M hydrochloric acid solutions by Pyridoxol hydrochloride (PXO) has been studied using weight loss and hydrogen evolution techniques. The inhibitor (PXO) exhibited highest inhibition efficiency of 71.93% at the highest inhibitor concentration of 1.0 x 10-2M investigated and a temperature of 303K from weight loss result. Also, inhibition was found to increase with increasing concentration of the inhibitor and decreasing temperature. A first order type of mechanism has been deduced from the kinetic treatment of the weight loss results and the process of inhibition attributed to physical adsorption. The results obtained from the two techniques show that pyridoxol hydrochloride could serve as an effective inhibitor of the corrosion of mild steel in HCl acid solution. The compound obeys the Langmuir adsorption isotherm equation.

Recovery and refining of manganese as by-product from hydrometallurgical processes

The consumption of manganese is increasing, but huge amounts of manganese still end up in waste in hydrometallurgical processes. The recovery of manganese from multi-metal solutions at low concentrations may not be economical. In addition, poor iron control typically prevents the production of high purity manganese. Separation of iron from manganese can be done with chemical precipitation or solvent extraction methods. Combined carbonate precipitation with air oxidation is a feasible method to separate iron and manganese due to the fast kinetics, good controllability and economical reagents. In addition the leaching of manganese carbonate is easier and less acid consuming than that of hydroxide or sulfide precipitates. Selective iron removal with great efficiency from MnSO4 solution is achieved by combined oxygen or air oxidation and CaCO3 precipitation at pH > 5.8 and at a redox potential of > 200 mV. In order to avoid gypsum formation, soda ash should be used instead of limestone. In such case, however, extra attention needs to be paid on the reagents mole ratios in order to avoid manganese coprecipitation. After iron removal, pure MnSO4 solution was obtained by solvent extraction using organophosphorus reagents, di-(2-ethylhexyl)phosphoric acid (D2EHPA) and bis(2,4,4- trimethylpentyl)phosphinic acid (CYANEX 272). The Mn/Ca and Mn/Mg selectivities can be increased by decreasing the temperature from the commonly used temperatures (40 –60oC) to 5oC. The extraction order of D2EHPA (Ca before Mn) at low temperature remains unchanged but the lowering of temperature causes an increase in viscosity and slower phase separation. Of these regents, CYANEX 272 is selective for Mn over Ca and, therefore, it would be the better choice if there is Ca present in solution. A three-stage Mn extraction followed by a two-stage scrubbing and two-stage sulfuric acid stripping is an effective method of producing a very pure MnSO4 intermediate solution for further processing. From the intermediate MnSO4 some special Mn- products for ion exchange applications were synthesized and studied. Three types of octahedrally coordinated manganese oxide materials as an alternative final product for manganese were chosen for synthesis: layer structured Nabirnessite, tunnel structured Mg-todorokite and K-kryptomelane. As an alternative source of pure MnSO4 intermediate, kryptomelane was synthesized by using a synthetic hydrometallurgical tailings. The results show that the studied OMS materials adsorb selectively Cu, Ni, Cd and K in the presence of Ca and Mg. It was also found that the exchange rates were reasonably high due to the small particle dimensions. Materials are stable in the studied conditions and their maximum Cu uptake capacity was 1.3 mmol/g. Competitive uptake of metals and acid was studied using equilibrium, batch kinetic and fixed-bed measurements. The experimental data was correlated with a dynamic model, which also accounts for the dissolution of the framework manganese. Manganese oxide micro-crystals were also bound onto silica to prepare a composite material having a particle size large enough to be used in column separation experiments. The MnOx/SiO2 ratio was found to affect significantly the properties of the composite. The higher the ratio, the lower is the specific surface area, the pore volume and the pore size. On the other hand, higher amount of silica binder gives composites better mechanical properties. Birnesite and todorokite can be aggregated successfully with colloidal silica at pH 4 and with MnO2/SiO2 weight ratio of 0.7. The best gelation and drying temperature was 110oC and sufficiently strong composites were obtained by additional heat-treatment at 250oC for 2 h. The results show that silica–supported MnO2 materials can be utilized to separate copper from nickel and cadmium. The behavior of the composites can be explained reasonably well with the presented model and the parameters estimated from the data of the unsupported oxides. The metal uptake capacities of the prepared materials were quite small. For example, the final copper loading was 0.14 mmol/gMnO2. According to the results the special MnO2 materials are potential for a specific environmental application to uptake harmful metal ions.

METHODOLOGY FOR AUTOMATICALLY DELIMITING PERMANENT PRESERVATION AREAS ALONG WATER COURSES - THE USE OF GIS IN THE HYDROLOGICAL BASIN OF THE SERGIPE RIVER, BRAZIL

ABSTRACT Permanent Preservation Areas (PPAs) along watercourses have been the focus of numerous studies, not only because of the fragility and ecological relevance of riverine vegetation, but also because of the inefficiency demonstrated in conforming to the legislation protecting it. One of the major difficulties encountered in terms of guaranteeing the effective conservation of these riverside areas is the absence of methodologies that can be used to define them rapidly and accurately without manually determining the widths of the rivers or assigning only uniform linear values for the entire watercourse. The present work sought to develop a spatial analysis methodology capable of automatically defining permanent preservation areas along watercourses using geographic information system (GIS) software. The present study was undertaken in the Sergipe River basin, "considering the river itself and its principal affluents. We used the database of the Digital Atlas of Hydrological Resources (SEMARH/SE), and the delimitations of the PPAs were performed using ArcGIS 10.1 and the XToolPro 9.0 extension. A total of 5,003.82 hectares of Permanent Preservation Areas were delimited along the margins of the rivers analyzed, with a margin of error of <1% in delimiting the widths of the rivers within the entire area considered. The methodology described here can be used to define PPAs efficiently, relatively rapidly, and with very small margins of error, thus representing a technological advance in terms of using GIS for land management.

NON-DESTRUCTIVE ANALYSIS OF THE ROOT SYSTEM AND TREE GROWTH PARAMETERS

ABSTRACT The productivity of Eucalyptus at plantations is increasing and has undergone a variety of research studies. Most research is dealing with simple dendrometric variables like the DBH (diameter at breast height) and tree height, or more complex variables including crown parameters or variables concerning photosynthesis. The root systems, however, have not been well analyzed yet. The objective of the study was to analyze the root system with a non-destructive method and to evaluate possible correlations with dendrometric variables of the tree (DBH, height, crown expansion). A small experimental plantation with 39 even-aged, 6-year-old trees of Eucalyptus grandis x urophylla has been investigated within this study. The results of the study show the highest correlation of the root areas with the crown expansion. In general, the root area shows a significantly bigger expansion in the eucalypt plantation than the tree crown, with a more homogeneous development.

Numerical evaluation of the modulus of longitudinal elasticity in structural round timber elements of the Eucalyptus genus

Currently, the standards that deal with the determination of the properties of rigidity and strength for structural round timber elements do not take in consideration in their calculations and mathematical models the influence of the existing irregularities in the geometry of these elements. This study has as objective to determine the effective value of the modulus of longitudinal elasticity for structural round timber pieces of the Eucalyptus citriodora genus by a technique of optimization allied to the Inverse Analysis Method, to the Finite Element Method and the Least Square Method.

Root system distribution of sugarcane irrigated with domestic sewage effluent aplication by subsurface drip system

Irrigation with domestic sewage effluent (DSE) has been recommended by subsurface dripping, as it can obtain a high rate of irrigation efficiency and faster use of salts in comparison with other irrigation methods. The study aimed at evaluating the area, the length and the effective depth of the root system of sugarcane irrigated with DSE by subsurface drip system and with different irrigation rates at depths of 0.00-0.20, 0.20-0.40, 0.40-0.60 and 0.60-0.80m. The experiment was carried out in the municipality of Piracicaba, in the state of São Paulo (SP), Brazil, in a sugarcane area irrigated with DSE in a completely randomized blocks set up in furrows, with three replications and four treatments, which are: one area without irrigation (AWI) and three irrigated areas meeting 50% (T50%), 100% (T100%) and 200% (T200%) of the crop's water need between each round of irrigation. T100% and T200% provided smaller areas and lengths of roots in the two deepest layers, as compared to AWI and T50%, which stimulated the development of deeper roots due to the water stress. TWI, T100% and T200% presented 80% of the roots up to a depth of 0.40m and T50% treatment presented 76.43% of roots total.