Bioprocess and biotecnology: effect of xylanase from Aspergillus niger and Aspergillus flavus on pulp biobleaching and enzyme production using agroindustrial residues as substract

This study compares two xylanases produced by filamentous fungi such as A. niger and A. flavus using agroindustrial residues as substract and evaluated the effect of these enzymes on cellulose pulp biobleaching process. Wheat bran was the best carbon source for xylanase production by A. niger and A. flavus. The production of xylanase was 18 and 21% higher on wheat bran when we compare the xylanase production with xylan. At 50°C, the xylanase of A. niger retained over 85% activity with 2 h of incubation, and A. flavus had a half-life of more than 75 minutes. At 55°C, the xylanase produced by A. niger showed more stable than from A. flavus showing a half-life of more than 45 minutes. The xylanase activity of A. niger and A. flavus were somehow protected in the presence of glycerol 5% when compared to the control (without additives). On the biobleaching assay it was observed that the xylanase from A. flavus was more effective in comparison to A. niger. The kappa efficiency corresponded to 36.32 and 25.93, respectively. That is important to emphasize that the cellulase activity was either analyzed and significant levels were not detected, which explain why the viscosity was not significantly modified.

Cloning and characterization of bifunctional enzyme farnesyl diphosphate/geranylgeranyl diphosphate synthase from Plasmodium falciparum

Abstract Background Isoprenoids are the most diverse and abundant group of natural products. In Plasmodium falciparum, isoprenoid synthesis proceeds through the methyl erythritol diphosphate pathway and the products are further metabolized by farnesyl diphosphate synthase (FPPS), turning this enzyme into a key branch point of the isoprenoid synthesis. Changes in FPPS activity could alter the flux of isoprenoid compounds downstream of FPPS and, hence, play a central role in the regulation of a number of essential functions in Plasmodium parasites. Methods The isolation and cloning of gene PF3D7_18400 was done by amplification from cDNA from mixed stage parasites of P. falciparum. After sequencing, the fragment was subcloned in pGEX2T for recombinant protein expression. To verify if the PF3D7_1128400 gene encodes a functional rPfFPPS protein, its catalytic activity was assessed using the substrate [4-14C] isopentenyl diphosphate and three different allylic substrates: dimethylallyl diphosphate, geranyl diphosphate or farnesyl diphosphate. The reaction products were identified by thin layer chromatography and reverse phase high-performance liquid chromatography. To confirm the product spectrum formed of rPfFPPS, isoprenic compounds were also identified by mass spectrometry. Apparent kinetic constants KM and Vmax for each substrate were determined by Michaelis–Menten; also, inhibition assays were performed using risedronate. Results The expressed protein of P. falciparum FPPS (rPfFPPS) catalyzes the synthesis of farnesyl diphosphate, as well as geranylgeranyl diphosphate, being therefore a bifunctional FPPS/geranylgeranyl diphosphate synthase (GGPPS) enzyme. The apparent KM values for the substrates dimethylallyl diphosphate, geranyl diphosphate and farnesyl diphosphate were, respectively, 68 ± 5 μM, 7.8 ± 1.3 μM and 2.06 ± 0.4 μM. The protein is expressed constitutively in all intra-erythrocytic stages of P. falciparum, demonstrated by using transgenic parasites with a haemagglutinin-tagged version of FPPS. Also, the present data demonstrate that the recombinant protein is inhibited by risedronate. Conclusions The rPfFPPS is a bifunctional FPPS/GGPPS enzyme and the structure of products FOH and GGOH were confirmed mass spectrometry. Plasmodial FPPS represents a potential target for the rational design of chemotherapeutic agents to treat malaria.

Functional characterisation of the non-essential protein kinases and phosphatases regulating Aspergillus nidulans hydrolytic enzyme production

Abstract Background Despite recent advances in the understanding of lignocellulolytic enzyme regulation, less is known about how different carbon sources are sensed and the signaling cascades that result in the adaptation of cellular metabolism and hydrolase secretion. Therefore, the role played by non-essential protein kinases (NPK) and phosphatases (NPP) in the sensing of carbon and/or energetic status was investigated in the model filamentous fungus Aspergillus nidulans. Results Eleven NPKs and seven NPPs were identified as being involved in cellulase, and in some cases also hemicellulase, production in A. nidulans. The regulation of CreA-mediated carbon catabolite repression (CCR) in the parental strain was determined by fluorescence microscopy, utilising a CreA: GFP fusion protein. The sensing of phosphorylated glucose, via the RAS signalling pathway induced CreA repression, while carbon starvation resulted in derepression. Growth on cellulose represented carbon starvation and derepressing conditions. The involvement of the identified NPKs in the regulation of cellulose-induced responses and CreA derepression was assessed by genome-wide transcriptomics (GEO accession 47810). CreA:GFP localisation and the restoration of endocellulase activity via the introduction of the ∆creA mutation, was assessed in the NPK-deficient backgrounds. The absence of either the schA or snfA kinase dramatically reduced cellulose-induced transcriptional responses, including the expression of hydrolytic enzymes and transporters. The mechanism by which these two NPKs controlled gene transcription was identified, as the NPK-deficient mutants were not able to unlock CreA-mediated carbon catabolite repression under derepressing conditions, such as carbon starvation or growth on cellulose. Conclusions Collectively, this study identified multiple kinases and phosphatases involved in the sensing of carbon and/or energetic status, while demonstrating the overlapping, synergistic roles of schA and snfA in the regulation of CreA derepression and hydrolytic enzyme production in A. nidulans. The importance of a carbon starvation-induced signal for CreA derepression, permitting transcriptional activator binding, appeared paramount for hydrolase secretion.

A serological follow-up of toxocariasis patients after chemotherapy based on the detection of IgG, IgA, and IgE antibodies by enzyme-linked immunosorbent assay.

A serological follow-up study was carried out on 27 children (1–12 years old) with visceral and/or ocular toxocariasis, after treatment with thiabendazole. A total of 159 serum samples were collected in a period ranging from 22–116 months. Enzyme-linked immunosorbent assays (IgG, IgA, and IgE ELISA) were standardized, using excretory–secretory antigens obtained from the second-stage larvae of a Toxocara canis culture. The sensitivity found for the IgG, IgA, and IgE ELISA, as determined in visceral toxocariasis patients, was 100%, 47.8%, and 78.3%, respectively. Approximately 84% of the patients presented single or multiple parasitosis, as diagnosed by stool examination, yet such variables did not appear to affect the anti-Toxocara immune response. Titers of specific IgE antibody showed a significant decrease during the first year after treatment, followed by a decrease in the IgA titers in the second year, and in the IgG titers from the fourth year onwards. Sera from all patients presented high avidity IgG antibodies, indicating that they were in the chronic phase of the disease. Moreover, 1 year after treatment, the level of leukocytes, eosinophils, and anti-A isohemagglutinin in patients decreased significantly. The present data suggest that IgE antibodies plus eosinophil counts are helpful parameters for patient followup after chemotherapy.

Renal GLUT1 reduction depends on angiotensin-converting enzyme inhibition in diabetic hypertensive rats

Aims: Angiotensin-converting enzyme (ACE) inhibitors are used in diabetic kidney disease to reduce systemic/intra-glomerular pressure. The objective of this study was to investigate whether reducing blood pressure (BP) could modulate renal glucose transporter expression, and urinary markers of diabetic nephropathy in diabetic hypertensive rats treated with ramipril or amlodipine. Main methods: Diabetes was induced in spontaneously-hypertensive rats (~210 g) by streptozotocin (50 mg/kg). Thirty days later, animals received ramipril 15 μg/kg/day (R, n =10), or amlodipine 10 mg/kg/day (A, n= 8,) or water (C, n = 10) by gavage. After 30-day treatment, body weight, glycaemia, urinary albumin and TGF-β1 (enzyme-linked immunosorbent assay) and BP (tail-cuff pressure method) were evaluated. Kidneys were removed for evaluation of renal cortex glucose transporters (Western blotting) and renal tissue ACE activity (fluorometric assay). Key findings: After treatments, body weight (p = 0.77) and glycaemia (p = 0.22) were similar among the groups. Systolic BP was similarly reduced (p < 0.001) in A and R vs. C (172.4 ± 3.2; 186.7 ± 3.7 and 202.2 ± 4.3 mm Hg; respectively). ACE activity (C: 0.903 ± 0.086; A: 0.654 ± 0.025, and R: 0.389 ± 0.057 mU/mg), albuminuria (C: 264.8 ± 15.4; A: 140.8 ± 13.5 and R: 102.8 ± 6.7 mg/24 h), and renal cortex GLUT1 content (C: 46.81 ± 4.54; A: 40.30 ± 5.39 and R: 26.89 ± 0.79 AU) decreased only in R (p < 0.001, p < 0.05 and p < 0.001; respectively). Significance:We concluded that the blockade of the renin–angiotensin systemwith ramipril reduced earlymarkers of diabetic nephropathy, a phenomenon that cannot be specifically related to decreased BP levels.

Electrochemically prepared polypyrrole-2-carboxylic acid films: synthesis protocols and studies on biosensors

The process for obtaining polypyrrole-2-carboxylic acid (PPY-2-COOH) films in acetonitrile was investigated using cyclic voltammetry, electrochemical quartz crystal microgravimetry (EQCM), and infrared spectroscopy (FTIR). Different potential ranges were applied during cyclic voltammetry experiments with the aim of obtaining films without and with the presence of controlled amounts of water added in acetonitrile. The FTIR spectra of the films have evidenced that cations and anions from the electrolyte solution were incorporated into the PPY-2-COOH structure, with a preferential adsorption of cations. After chemically immobilizing polyphenoloxidase (tyrosinase, PPO), PPY-2-COOH/PPO films were build for amperometric detection of catechol, establishing a linear limit of concentrations ranging from 5.0 x 10-4 to 2.5 x 10-2 mol L-1.

Modeling physiological processes in plankton on enzyme kinetic principles

[EN] Many ecologically important chemical transformations in the ocean are controlled by biochemical enzyme reactions in plankton. Nitrogenase regulates the transformation of N2 to ammonium in some cyanobacteria and serves as the entryway for N2 into the ocean biosphere. Nitrate reductase controls the reduction of NO3 to NO2 and hence new production in phytoplankton. The respiratory electron transfer system in all organisms links the carbon oxidation reactions of intermediary metabolism with the reduction of oxygen in respiration. Rubisco controls the fixation of CO2 into organic matter in phytoplankton and thus is the major entry point of carbon into the oceanic biosphere. In addition to these, there are the enzymes that control CO2 production, NH4 excretion and the fluxes of phosphate. Some of these enzymes have been recognized and researched by marine scientists in the last thirty years. However, until recently the kinetic principles of enzyme control have not been exploited to formulate accurate mathematical equations of the controlling physiological expressions. Were such expressions available they would increase our power to predict the rates of chemical transformations in the extracellular environment of microbial populations whether this extracellular environment is culture media or the ocean. Here we formulate from the principles of bisubstrate enzyme kinetics, mathematical expressions for the processes of NO3 reduction, O2 consumption, N2 fixation, total nitrogen uptake.

Sviluppo di biosensori: modifiche di superfici elettrodiche e sistemi di immobilizzazione enzimatica

An amperometric glucose biosensor was developed using an anionic clay matrix (LDH) as enzyme support. The enzyme glucose oxidase (GOx) was immobilized on a layered double hydroxide Ni/Al-NO3 LDH during the electrosynthesis, which was followed by crosslinking with glutaraldehyde (GA) vapours or with GA and bovine serum albumin (GABSA) to avoid the enzyme release. The electrochemical reaction was carried out potentiostatically, at -0.9V vs. SCE, using a rotating disc Pt electrode to assure homogeneity of the electrodeposition suspension, containing GOx, Ni(NO3)2 and Al(NO3)3 in 0.3 M KNO3. The mechanism responsible of the LDH electrodeposition involves the precipitation of the LDH due to the increase of pH at the surface of the electrode, following the cathodic reduction of nitrates. The Pt surface modified with the Ni/Al-NO3 LDH shows a much reduced noise, giving rise to a better signal to noise ratio for the currents relative to H2O2 oxidation, and a linear range for H2O2 determination wider than the one observed for bare Pt electrodes. We pointed out the performances of the biosensor in terms of sensitivity to glucose, calculated from the slope of the linear part of the calibration curve for enzimatically produced H2O2; the sensitivity was dependent on parameters related to the electrodeposition in addition to working conditions. In order to optimise the glucose biosensor performances, with a reduced number of experimental runs, we applied an experimental design. A first screening was performed considering the following variables: deposition time (30 - 120 s), enzyme concentration (0.5 - 3.0 mg/mL), Ni/Al molar ratio (3:1 or 2:1) of the electrodeposition solution at a total metals concentration of 0.03 M and pH of the working buffer solution (5.5-7.0). On the basis of the results from this screening, a full factorial design was carried out, taking into account only enzyme concentration and Ni/Al molar ratio of the electrosynthesis solution. A full factorial design was performed to study linear interactions between factors and their quadratic effects and the optimal setup was evaluated by the isoresponse curves. The significant factors were: enzyme concentration (linear and quadratic terms) and the interaction between enzyme concentration and Ni/Al molar ratio. Since the major obstacle for application of amperometric glucose biosensors is the interference signal resulting from other electro-oxidizable species present in the real matrices, such as ascorbate (AA), the use of different permselective membranes on Pt-LDHGOx modified electrode was discussed with the aim of improving biosensor selectivity and stability. Conventional membranes obtained using Nafion, glutaraldehyde (GA) vapours, GA-BSA were tested together with more innovative materials like palladium hexacyanoferrate (PdHCF) and titania hydrogels. Particular attention has been devoted to hydrogels, because they possess some attractive features, which are generally considered to favour biosensor materials biocompatibility and, consequently, the functional enzyme stability. The Pt-LDH-GOx-PdHCF hydrogel biosensor presented an anti-interferant ability so that to be applied for an accurate glucose analysis in blood. To further improve the biosensor selectivity, protective membranes containing horseradish peroxidase (HRP) were also investigated with the aim of oxidising the interferants before they reach the electrode surface. In such a case glucose determination was also accomplished in real matrices with high AA content. Furthermore, the application of a LDH containing nickel in the oxidised state was performed not only as a support for the enzyme, but also as anti-interferant sistem. The result is very promising and it could be the starting point for further applications in the field of amperometric biosensors; the study could be extended to other oxidase enzymes.

Development of muliplexed analytical methods based on bioluminescent whole-cell biosensors

The subject of this Ph.D. research thesis is the development and application of multiplexed analytical methods based on bioluminescent whole-cell biosensors. One of the main goals of analytical chemistry is multianalyte testing in which two or more analytes are measured simultaneously in a single assay. The advantages of multianalyte testing are work simplification, high throughput, and reduction in the overall cost per test. The availability of multiplexed portable analytical systems is of particular interest for on-field analysis of clinical, environmental or food samples as well as for the drug discovery process. To allow highly sensitive and selective analysis, these devices should combine biospecific molecular recognition with ultrasensitive detection systems. To address the current need for rapid, highly sensitive and inexpensive devices for obtaining more data from each sample,genetically engineered whole-cell biosensors as biospecific recognition element were combined with ultrasensitive bioluminescence detection techniques. Genetically engineered cell-based sensing systems were obtained by introducing into bacterial, yeast or mammalian cells a vector expressing a reporter protein whose expression is controlled by regulatory proteins and promoter sequences. The regulatory protein is able to recognize the presence of the analyte (e.g., compounds with hormone-like activity, heavy metals…) and to consequently activate the expression of the reporter protein that can be readily measured and directly related to the analyte bioavailable concentration in the sample. Bioluminescence represents the ideal detection principle for miniaturized analytical devices and multiplexed assays thanks to high detectability in small sample volumes allowing an accurate signal localization and quantification. In the first chapter of this dissertation is discussed the obtainment of improved bioluminescent proteins emitting at different wavelenghts, in term of increased thermostability, enhanced emission decay kinetic and spectral resolution. The second chapter is mainly focused on the use of these proteins in the development of whole-cell based assay with improved analytical performance. In particular since the main drawback of whole-cell biosensors is the high variability of their analyte specific response mainly caused by variations in cell viability due to aspecific effects of the sample’s matrix, an additional bioluminescent reporter has been introduced to correct the analytical response thus increasing the robustness of the bioassays. The feasibility of using a combination of two or more bioluminescent proteins for obtaining biosensors with internal signal correction or for the simultaneous detection of multiple analytes has been demonstrated by developing a dual reporter yeast based biosensor for androgenic activity measurement and a triple reporter mammalian cell-based biosensor for the simultaneous monitoring of two CYP450 enzymes activation, involved in cholesterol degradation, with the use of two spectrally resolved intracellular luciferases and a secreted luciferase as a control for cells viability. In the third chapter is presented the development of a portable multianalyte detection system. In order to develop a portable system that can be used also outside the laboratory environment even by non skilled personnel, cells have been immobilized into a new biocompatible and transparent polymeric matrix within a modified clear bottom black 384 -well microtiter plate to obtain a bioluminescent cell array. The cell array was placed in contact with a portable charge-coupled device (CCD) light sensor able to localize and quantify the luminescent signal produced by different bioluminescent whole-cell biosensors. This multiplexed biosensing platform containing whole-cell biosensors was successfully used to measure the overall toxicity of a given sample as well as to obtain dose response curves for heavy metals and to detect hormonal activity in clinical samples (PCT/IB2010/050625: “Portable device based on immobilized cells for the detection of analytes.” Michelini E, Roda A, Dolci LS, Mezzanotte L, Cevenini L , 2010). At the end of the dissertation some future development steps are also discussed in order to develop a point of care (POCT) device that combine portability, minimum sample pre-treatment and highly sensitive multiplexed assays in a short assay time. In this POCT perspective, field-flow fractionation (FFF) techniques, in particular gravitational variant (GrFFF) that exploit the earth gravitational field to structure the separation, have been investigated for cells fractionation, characterization and isolation. Thanks to the simplicity of its equipment, amenable to miniaturization, the GrFFF techniques appears to be particularly suited for its implementation in POCT devices and may be used as pre-analytical integrated module to be applied directly to drive target analytes of raw samples to the modules where biospecifc recognition reactions based on ultrasensitive bioluminescence detection occurs, providing an increase in overall analytical output.

Isolierung, Reinigung und Expression zentraler Enzyme der Biosynthese des pflanzlichen Antiarrhythmikums Ajmalin

Zusammenfassung In der vorliegenden Arbeit wurden im Zuge derAjmalinbiosynthese in Rauvolfia serpentina die NADPH2abhängigen Reduktionsschritte des Alkaloids Vomilenin zu 17O Acetylnorajmalin genauer untersucht.Dabei konnte erstmals die exakte Reaktionsreihenfolgeaufgedeckt und die daran beteiligten Enzyme ausPflanzenzellsuspensionskulturen isoliert und aufgereinigtwerden. Die ausgearbeiteten, optimierten Reinigungsprotokolleführten in wenigen Stufen gezielt zu den voneinandergetrennten Reduktase Fraktionen. Durch die Trennung derReduktase Aktivitäten war der Grundstein gelegt, dasZwischenprodukt der Reaktion anzureichern und mitverschiedenen analytischen Verfahren als 2?-(R)-1.2Dihydrovomilenin zu identifizieren. Die daraufhin vergebenenBezeichnungen Vomilenin Reduktase (EC.1.5.1.32) und 1.2Dihydrovomilenin Reduktase (EC.1.3.1.73) zielen auf dasumzusetzende Substrat ab.Für die Vomilenin Reduktase konnte eine 4 stufige Reinigungüber (NH4)2SO4 Fällung, Anionen-austauschchromatographie mitSOURCE 30Q, Hydrophobe Interaktionschromatographie an SOURCE15Phe und Affinitätschromatographie mit 2’,5’ ADP Sepharoseausgearbeitet werden. Hierbei konnte die 1.2Dihydrovomilenin Reduktase schon nach dem erstensäulenchromatogra-phischen Schritt (S 30Q) abgetrenntwerden. Das am Ende der Proteinreinigung angefertigte SDSGel zeigte nur noch 3 Banden, von denen die beiden bei ca.40 und 43 kDa gelegenen Banden mit dem Aktivitätsverlaufder Vomilenin Reduktase korrelierten. Diese wurden einempartiellen Verdau mit der Endoproteinase LysC unterworfen,wobei jeweils 2 Spaltpeptide erhalten werden konnten.Die 1.2 Dihydrovomilenin Reduktase Reinigung umfaßte 6Reinigungsschritte mit (NH4)2SO4-Fällung, SOURCE 30QAnionenaustauschchromatographie, HydroxylapatitChromatographie, 2’,5’ ADP Sepharose-Chromatographie,Anionenaustausch an DEAE Sepharose und abschließen-denAnionenaustausch über MonoQ. Die resultierendeProteinfraktion wies eine ca. 200 fache Anreicherung an 1.2Dihydrovomilenin Reduktase auf. Auch hierbei wurde die nachSDS Gelelek-trophorese als 1.2 Dihydrovomilenin Reduktasebestimmte Proteinbande (bei ca. 48 kDa) sequen-ziert. Eskonnten vier Peptidfragmente erhalten werden, die ebenso wiedie sequenzierten Peptidstücke der 40 und 43 kDa Bande einehohe Homologie zu Oxidoreduktasen, im einzelnen zuCinnamoylalcohol- und Mannitol Dehydrogenasen, aufwiesen.Um die Identität der sequenzierten Proteinbanden zubestätigen, wurde über „reverse genetics“ die jeweilscodierende cDNA eruiert. Dafür wurden - ausgehend von denPeptidstücken der Mikro-sequenzierung - degenerierte Primerentwickelt und über PCR Teilbereiche der cDNA amplifiziert.Diese konnten für eine radioaktive Durchmusterung einerRauvolfia cDNA Bank herangezogen werden. Alternativ botallein die Kenntnis der spezifischen Nukleotidabfolge dieMöglichkeit der Gewinnung von 5’ und 3’ Ende derVollängenklone durch RACE PCR.Nach Abschluß dieser Arbeiten konnten für die 40 und 48 kDaBande je ein Vollängenklon und für die 43 kDa Bande 2Vollängenklone (Isoformen) gefunden werden. SämtlicheVollängenklone besitzen einen offenen Leserahmen, der durchnicht zu translatierende Bereiche am 5’ und 3‘ Endeeingefaßt wird. Um die entsprechenden Proteine produzierenzu können, mußten die dafür codierenden cDNA Bereiche dereinzelnen Klone in ein geeignetes Vektor Wirt-System(Expressionssystem) eingebracht werden.Nach erfolgreicher Umklonierung wurde die Expression durchIPTG Zugabe kontrolliert und Proteinrohextrakte aus denBakterienstämmen isoliert. Als Substrate wurden Vomilenin,das strukturisomere Alkaloid Perakin und aufgrund derHomologien zu Cinnamoylalcohol und Mannitol Dehydrogenasen Zimtaldehyd, Dihydrozimtaldehyd und D(-)Fructose getestet. In allen E. coli Stämmen konnte ein unspezifischesReduktionspotential nachgewiesen werden, ohne daß jedochVomilenin reduziert wurde. Die Testung der 1.2Dihydrovomilenin Reduktase Klone mußte wegen Substratmangelentfallen.Die weitere Charakterisierung der pflanzlichen Enzymeerbrachte eine enorm hohe Substratspezifität mit einer sichauf Rauvolfia beschränkenden taxonomischen Verbreitung.Die Molekulargewichtsbestimmung für die Vomilenin Reduktaseergab nach Größenausschluß-chromatographie an Superdex 75ein Gewicht von etwa 43 kDa. Das ebenfalls über Superdex 75ermittelte Molekulargewicht für die 1.2 DihydrovomileninReduktase lag bei ca. 49.8 kDa. Weiterhin wurde eine Metallionenabhängigkeit für dieVomilenin Reduktase aufgezeigt und die Cofaktorspezifitätsowie die pH und Temperatur Optima für beide Reduktasenbestimmt.

An evolutionary approach to the design of experiments for combinatorial optimization with an application to enzyme engineering

In a large number of problems the high dimensionality of the search space, the vast number of variables and the economical constrains limit the ability of classical techniques to reach the optimum of a function, known or unknown. In this thesis we investigate the possibility to combine approaches from advanced statistics and optimization algorithms in such a way to better explore the combinatorial search space and to increase the performance of the approaches. To this purpose we propose two methods: (i) Model Based Ant Colony Design and (ii) Naïve Bayes Ant Colony Optimization. We test the performance of the two proposed solutions on a simulation study and we apply the novel techniques on an appplication in the field of Enzyme Engineering and Design.

Development of bionanotechnological strategies for signal enhancement in nucleic acids biosensors

Nucleic acid biosensors represent a powerful tool for clinical and environmental pathogens detection. For applications such as point-of-care biosensing, it is fundamental to develop sensors that should be automatic, inexpensive, portable and require a professional skill of the user that should be as low as possible. With the goal of determining the presence of pathogens when present in very small amount, such as for the screening of pathogens in drinking water, an amplification step must be implemented. Often this type of determinations should be performed with simple, automatic and inexpensive hardware: the use of a chemical (or nanotechnological) isothermal solution would be desirable. My Ph.D. project focused on the study and on the testing of four isothermal reactions which can be used to amplify the nucleic acid analyte before the binding event on the surface sensor or to amplify the signal after that the hybridization event with the probe. Recombinase polymerase amplification (RPA) and ligation-mediated rolling circle amplification (L-RCA) were investigated as methods for DNA and RNA amplification. Hybridization chain reaction (HCR) and Terminal deoxynucleotidil transferase-mediated amplification were investigated as strategies to achieve the enhancement of the signal after the surface hybridization event between target and probe. In conclusion, it can be said that only a small subset of the biochemical strategies that are proved to work in solution towards the amplification of nucleic acids does truly work in the context of amplifying the signal of a detection system for pathogens. Amongst those tested during my Ph.D. activity, recombinase polymerase amplification seems the best candidate for a useful implementation in diagnostic or environmental applications.

Kristallisation der Arbutin-Synthase und der Strictosidin Glukosidase - zwei Enzyme aus dem sekundären Glykosidstoffwechsel von Rauvolfia serpentina

Kristallisation der Arbutin-Synthase und der Strictosidin Glukosidase - zwei Enzyme aus dem sekundären Glykosidstoffwechsel von Rauvolfia serpentina Die vorliegende Arbeit befasst sich mit der Kristallisation und der strukturellen Auswertung der Arbutin-Synthase (AS) und der Strictosidin Glukosidase (SG). Beide Enzyme stammen aus der Medizinalpflanze Rauvolfia serpentina. Für die Kristallisation der Arbutin-Synthase wurden ca. 2500 verschiedene Beding-ungen experimentell untersucht. Für einige dieser Experimente wurde das Enzym molekularbiologisch und chemisch verändert. Trotzdem konnten keine Kristalle erhalten werden. Die bei diesen Veränderungen erhaltenen Ergebnisse wurden anhand von Vergleichen mit Strukturen anderer Glykosyltransferasen der gleichen Familie analysiert. Bei der Reinigung der AS konnte mit verschiedenen Trennsystemen nie eine homogene Lösung produziert werden. Der wahrscheinliche Grund für diese schlechte Isolierbarkeit, und damit der wahrscheinliche Grund für die schwierige Kris-tallisation, liegt in der überdurchschnittlich hohen Anzahl an Cysteinen in der Proteinsequenz. Mit den Aminosäuren Cys171, Cys253 und Cys461 wurden drei Cysteine gefunden, die einem Strukturvergleich nach an der Proteinoberfläche liegen und möglicherweise durch Quervernetzungen mit anderen Proteinmolekülen ein heterogenes Gemisch bilden, das nicht geordnet kristallisieren kann. Durch gezielte Mutationen dieser drei Aminosäuren könnte die Kristallisation zukünftig ermöglicht werden. Für die SG waren bereits Bedingungen bekannt bei denen nicht vermessbare Enzymkristalle (Nadeln) wuchsen. In weit gefächerten Versuchen konnten diese Kristalle jedoch nicht zu 3D-Wachstum angeregt werden. Es wurden mit einem HTS-Screening neue Bedingungen zur Kristallisation gefunden. Anschließend konnten die native Struktur und der Strictosidin/Enzym-Komplex vermessen und aufgeklärt werden. Die SG gehört zur Familie 1 der Glukosidasen (GH-1) und besitzt die in dieser Familie konservierte (beta/alpha)8-Barrel-Faltung. Im Vergleich mit 16 bekannten Glykosidasen der Familie GH-1 wurde die Substratbindung untersucht. Dabei wurde die in der Familie konservierte Zuckerbindung vorgefunden, jedoch große Unterschiede in der Aglykonbindung entdeckt. Es wurden Bedingungen für die Konformationsänderung des Trp388 erkannt. Diese Konformationsänderung dirigiert den Aglykonteil des Substrates auf verschiedene Seiten der Substratbindungstasche und teilt so die Familie GH-1 in zwei Gruppen.