The word-length effect in acquired alexia, and real and virtual hemianopia

A word-length effect is often described in pure alexia, with reading time proportional to the number of letters in a word. Given the frequent association of right hemianopia with pure alexia, it is uncertain whether and how much of the word-length effect may be attributable to the hemifield loss. To isolate the contribution of the visual field defect, we simulated hemianopia in healthy subjects with a gaze-contingent paradigm during an eye-tracking experiment. We found a minimal word-length effect of 14 ms/letter for full-field viewing, which increased to 38 ms/letter in right hemianopia and to 31 ms/letter in left hemianopia. We found a correlation between mean reading time and the slope of the word-length effect in hemianopic conditions. The 95% upper prediction limits for the word-length effect were 51 ms/letter in subjects with full visual fields and 161 ms/letter with simulated right hemianopia. These limits, which can be considered diagnostic criteria for an alexic word-length effect, were consistent with the reading performance of six patients with diagnoses based independently on perimetric and imaging data: two patients with probable hemianopic dyslexia, and four with alexia and lesions of the left fusiform gyrus, two with and two without hemianopia. Two of these patients also showed reduction of the word-length effect over months, one with and one without a reading rehabilitation program. Our findings clarify the magnitude of the word-length effect that originates from hemianopia alone, and show that the criteria for a word-length effect indicative of alexia differ according to the degree of associated hemifield loss.

An efficient framework for photon Monte Carlo treatment planning

Currently photon Monte Carlo treatment planning (MCTP) for a patient stored in the patient database of a treatment planning system (TPS) can usually only be performed using a cumbersome multi-step procedure where many user interactions are needed. This means automation is needed for usage in clinical routine. In addition, because of the long computing time in MCTP, optimization of the MC calculations is essential. For these purposes a new graphical user interface (GUI)-based photon MC environment has been developed resulting in a very flexible framework. By this means appropriate MC transport methods are assigned to different geometric regions by still benefiting from the features included in the TPS. In order to provide a flexible MC environment, the MC particle transport has been divided into different parts: the source, beam modifiers and the patient. The source part includes the phase-space source, source models and full MC transport through the treatment head. The beam modifier part consists of one module for each beam modifier. To simulate the radiation transport through each individual beam modifier, one out of three full MC transport codes can be selected independently. Additionally, for each beam modifier a simple or an exact geometry can be chosen. Thereby, different complexity levels of radiation transport are applied during the simulation. For the patient dose calculation, two different MC codes are available. A special plug-in in Eclipse providing all necessary information by means of Dicom streams was used to start the developed MC GUI. The implementation of this framework separates the MC transport from the geometry and the modules pass the particles in memory; hence, no files are used as the interface. The implementation is realized for 6 and 15 MV beams of a Varian Clinac 2300 C/D. Several applications demonstrate the usefulness of the framework. Apart from applications dealing with the beam modifiers, two patient cases are shown. Thereby, comparisons are performed between MC calculated dose distributions and those calculated by a pencil beam or the AAA algorithm. Interfacing this flexible and efficient MC environment with Eclipse allows a widespread use for all kinds of investigations from timing and benchmarking studies to clinical patient studies. Additionally, it is possible to add modules keeping the system highly flexible and efficient.

Computer algebra for x-ray spectral reconstruction between 6 and 25 MV

A previously presented algorithm for the reconstruction of bremsstrahlung spectra from transmission data has been implemented into MATHEMATICA. Spectra vectorial algebra has been used to solve the matrix system A * F = T. The new implementation has been tested by reconstructing photon spectra from transmission data acquired in narrow beam conditions, for nominal energies of 6, 15, and 25 MV. The results were in excellent agreement with the original calculations. Our implementation has the advantage to be based on a well-tested mathematical kernel. Furthermore it offers a comfortable user interface.

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Enabling the evolution of J2EE applications through reverse engineering and quality assurance

Enterprise Applications are complex software systems that manipulate much persistent data and interact with the user through a vast and complex user interface. In particular applications written for the Java 2 Platform, Enterprise Edition (J2EE) are composed using various technologies such as Enterprise Java Beans (EJB) or Java Server Pages (JSP) that in turn rely on languages other than Java, such as XML or SQL. In this heterogeneous context applying existing reverse engineering and quality assurance techniques developed for object-oriented systems is not enough. Because those techniques have been created to measure quality or provide information about one aspect of J2EE applications, they cannot properly measure the quality of the entire system. We intend to devise techniques and metrics to measure quality in J2EE applications considering all their aspects and to aid their evolution. Using software visualization we also intend to inspect to structure of J2EE applications and all other aspects that can be investigate through this technique. In order to do that we also need to create a unified meta-model including all elements composing a J2EE application.

tkCybernetics

tkCybernetics is a simulation software that can be used to create and evaluate simple cybernetic circuits as a combination of lowpass and highpass filters and several nonlinear elements. tkCybernetics has been developed for and successfully applied to introductory courses on biological cybernetics at Bielefeld University. Therefore, it is recommended for students who start learning about cybernetics. Students can quickly grasp the concepts used in the graphical user interface and are able to create their own circuits after a short introduction to the program. Its usefulness for advanced students and researchers is limited to quickly testing circuits. This article provides detailed tutorial information on how to install and work with tkCybernetics for self-learning and for higher education.

Pedagogical quality in e-learning

The article is concerned with design and use of e-learning technology to develop education qualitatively. The purpose is to develop a framework for a pedagogical evaluation of e-learning technology. The approach is that evaluation and design must be grounded in a learning theoretical approach, and it is argued that it is necessary to make a reflection of technology in relation to activities, learning principles, and a learning theory in order to qualitatively develop education. The article presents three frameworks developed on the basis of cognitivism, radical constructivism and activity theory. Finally, on the basis of the frameworks, the article discusses e-learning technology and, more specifically, design of virtual learning environments and learning objects. It is argued that e-learning technology is not pedagogically neutral, and that it is therefore necessary to focus on design of technology that explicitly supports a certain pedagogical approach. Further, it is argued that design should direct its focus away from organisation of content and towards design of activities.

How to Improve the Production Process for interactive TV with semi-formal Methods

The central question for this paper is how to improve the production process by closing the gap between industrial designers and software engineers of television(TV)-based User Interfaces (UI) in an industrial environment. Software engineers are highly interested whether one UI design can be converted into several fully functional UIs for TV products with different screen properties. The aim of the software engineers is to apply automatic layout and scaling in order to speed up and improve the production process. However, the question is whether a UI design lends itself for such automatic layout and scaling. This is investigated by analysing a prototype UI design done by industrial designers. In a first requirements study, industrial designers had created meta-annotations on top of their UI design in order to disclose their design rationale for discussions with software engineers. In a second study, five (out of ten) industrial designers assessed the potential of four different meta-annotation approaches. The question was which annotation method industrial designers would prefer and whether it could satisfy the technical requirements of the software engineering process. One main result is that the industrial designers preferred the method they were already familiar with, which therefore seems to be the most effective one although the main objective of automatic layout and scaling could still not be achieved.

Teaching Cognitive Modeling Using PDP++

PDP++ is a freely available, open source software package designed to support the development, simulation, and analysis of research-grade connectionist models of cognitive processes. It supports most popular parallel distributed processing paradigms and artificial neural network architectures, and it also provides an implementation of the LEABRA computational cognitive neuroscience framework. Models are typically constructed and examined using the PDP++ graphical user interface, but the system may also be extended through the incorporation of user-written C++ code. This article briefly reviews the features of PDP++, focusing on its utility for teaching cognitive modeling concepts and skills to university undergraduate and graduate students. An informal evaluation of the software as a pedagogical tool is provided, based on the author’s classroom experiences at three research universities and several conference-hosted tutorials.

Software als Schutzgegenstand des Europäischen Urheberrechts

After 20 years of silence, two recent references from the Czech Republic (Bezpečnostní softwarová asociace, Case C-393/09) and from the English High Court (SAS Institute, Case C-406/10) touch upon several questions that are fundamental for the extent of copyright protection for software under the Computer Program Directive 91/25 (now 2009/24) and the Information Society Directive 2001/29. In Case C-393/09, the European Court of Justice held that “the object of the protection conferred by that directive is the expression in any form of a computer program which permits reproduction in different computer languages, such as the source code and the object code.” As “any form of expression of a computer program must be protected from the moment when its reproduction would engender the reproduction of the computer program itself, thus enabling the computer to perform its task,” a graphical user interface (GUI) is not protected under the Computer Program Directive, as it does “not enable the reproduction of that computer program, but merely constitutes one element of that program by means of which users make use of the features of that program.” While the definition of computer program and the exclusion of GUIs mirror earlier jurisprudence in the Member States and therefore do not come as a surprise, the main significance of Case C-393/09 lies in its interpretation of the Information Society Directive. In confirming that a GUI “can, as a work, be protected by copyright if it is its author’s own intellectual creation,” the ECJ continues the Europeanization of the definition of “work” which began in Infopaq (Case C-5/08). Moreover, the Court elaborated this concept further by excluding expressions from copyright protection which are dictated by their technical function. Even more importantly, the ECJ held that a television broadcasting of a GUI does not constitute a communication to the public, as the individuals cannot have access to the “essential element characterising the interface,” i.e., the interaction with the user. The exclusion of elements dictated by technical functions from copyright protection and the interpretation of the right of communication to the public with reference to the “essential element characterising” the work may be seen as welcome limitations of copyright protection in the interest of a free public domain which were not yet apparent in Infopaq. While Case C-393/09 has given a first definition of the computer program, the pending reference in Case C-406/10 is likely to clarify the scope of protection against nonliteral copying, namely in how far the protection extends beyond the text of the source code to the design of a computer program and where the limits of protection lie as regards the functionality of a program and mere “principles and ideas.” In light of the travaux préparatoires, it is submitted that the ECJ is also likely to grant protection for the design of a computer program, while excluding both the functionality and underlying principles and ideas from protection under the European copyright directives.

Vergleich von Softwarelösungen für die Ökobilanzierung – eine softwareergonomische Analyse

Ökobilanzierung von Produktsystemen dient der Abschätzung ihrer Wirkung auf die Umwelt. Eine vollständige Lebenswegbetrachtung erfordert auch die Einbeziehung intralogistischer Transportprozesse bzw. -mittel. Für die Erstellung von Ökobilanzen wird i. d. R. ein Computerprogramm verwendet. Die Demoversionen dreier kommerzieller Softwarelösungen (SimaPro, GaBi und Umberto NXT LCA) und die Vollversion einer Open Source Software (openLCA) wurden aus softwareergonomischer Sicht analysiert. Hierzu erfolgte u. a. der Nachbau der bereitgestellten Tutorials bzw. die Modellierung eigener Produktsysteme. Im Rahmen der Analyse wurden die Punkte • Entstehung, Verbreitung, Zielgruppe, • Eignung der Tutorials, Erlernbarkeit, • Grafische Benutzeroberfläche, Individualisierbarkeit der Software, • Umsetzung der Anforderungen aus den Ökobilanzierungsnormen, • Notwendige Arbeitsschritte zur Erstellung einer Ökobilanz einer vergleichenden Betrachtung unterzogen. Der Beitrag beinhaltet eine Einführung in die wesentlichen Prinzipien der Ökobilanzierung und die Grundsätze der Softwareergonomie. Diese werden zu softwareergonomischen Eigenschaften für Ökobilanzsoftwarelösungen subsumiert. Anschließend werden die Ergebnisse des Softwarevergleiches dargestellt. Abschließend erfolgt eine Zusammenfassung der Erkenntnisse.

Ragu: a free tool for the analysis of EEG and MEG event-related scalp field data using global randomization statistics

We present a program (Ragu; Randomization Graphical User interface) for statistical analyses of multichannel event-related EEG and MEG experiments. Based on measures of scalp field differences including all sensors, and using powerful, assumption-free randomization statistics, the program yields robust, physiologically meaningful conclusions based on the entire, untransformed, and unbiased set of measurements. Ragu accommodates up to two within-subject factors and one between-subject factor with multiple levels each. Significance is computed as function of time and can be controlled for type II errors with overall analyses. Results are displayed in an intuitive visual interface that allows further exploration of the findings. A sample analysis of an ERP experiment illustrates the different possibilities offered by Ragu. The aim of Ragu is to maximize statistical power while minimizing the need for a-priori choices of models and parameters (like inverse models or sensors of interest) that interact with and bias statistics.

Ecological validity of virtual reality daily living activities screening for early dementia: longitudinal study

Background: Dementia is a multifaceted disorder that impairs cognitive functions, such as memory, language, and executive functions necessary to plan, organize, and prioritize tasks required for goal-directed behaviors. In most cases, individuals with dementia experience difficulties interacting with physical and social environments. The purpose of this study was to establish ecological validity and initial construct validity of a fire evacuation Virtual Reality Day-Out Task (VR-DOT) environment based on performance profiles as a screening tool for early dementia. Objective: The objectives were (1) to examine the relationships among the performances of 3 groups of participants in the VR-DOT and traditional neuropsychological tests employed to assess executive functions, and (2) to compare the performance of participants with mild Alzheimer’s-type dementia (AD) to those with amnestic single-domain mild cognitive impairment (MCI) and healthy controls in the VR-DOT and traditional neuropsychological tests used to assess executive functions. We hypothesized that the 2 cognitively impaired groups would have distinct performance profiles and show significantly impaired independent functioning in ADL compared to the healthy controls. Methods: The study population included 3 groups: 72 healthy control elderly participants, 65 amnestic MCI participants, and 68 mild AD participants. A natural user interface framework based on a fire evacuation VR-DOT environment was used for assessing physical and cognitive abilities of seniors over 3 years. VR-DOT focuses on the subtle errors and patterns in performing everyday activities and has the advantage of not depending on a subjective rating of an individual person. We further assessed functional capacity by both neuropsychological tests (including measures of attention, memory, working memory, executive functions, language, and depression). We also evaluated performance in finger tapping, grip strength, stride length, gait speed, and chair stands separately and while performing VR-DOTs in order to correlate performance in these measures with VR-DOTs because performance while navigating a virtual environment is a valid and reliable indicator of cognitive decline in elderly persons. Results: The mild AD group was more impaired than the amnestic MCI group, and both were more impaired than healthy controls. The novel VR-DOT functional index correlated strongly with standard cognitive and functional measurements, such as mini-mental state examination (MMSE; rho=0.26, P=.01) and Bristol Activities of Daily Living (ADL) scale scores (rho=0.32, P=.001). Conclusions: Functional impairment is a defining characteristic of predementia and is partly dependent on the degree of cognitive impairment. The novel virtual reality measures of functional ability seem more sensitive to functional impairment than qualitative measures in predementia, thus accurately differentiating from healthy controls. We conclude that VR-DOT is an effective tool for discriminating predementia and mild AD from controls by detecting differences in terms of errors, omissions, and perseverations while measuring ADL functional ability.

Visual exploration in Parkinson's disease and Parkinson's disease dementia

Parkinson's disease, typically thought of as a movement disorder, is increasingly recognized as causing cognitive impairment and dementia. Eye movement abnormalities are also described, including impairment of rapid eye movements (saccades) and the fixations interspersed between them. Such movements are under the influence of cortical and subcortical networks commonly targeted by the neurodegeneration seen in Parkinson's disease and, as such, may provide a marker for cognitive decline. This study examined the error rates and visual exploration strategies of subjects with Parkinson's disease, with and without cognitive impairment, whilst performing a battery of visuo-cognitive tasks. Error rates were significantly higher in those Parkinson's disease groups with either mild cognitive impairment (P = 0.001) or dementia (P < 0.001), than in cognitively normal subjects with Parkinson's disease. When compared with cognitively normal subjects with Parkinson's disease, exploration strategy, as measured by a number of eye tracking variables, was least efficient in the dementia group but was also affected in those subjects with Parkinson's disease with mild cognitive impairment. When compared with control subjects and cognitively normal subjects with Parkinson's disease, saccade amplitudes were significantly reduced in the groups with mild cognitive impairment or dementia. Fixation duration was longer in all Parkinson's disease groups compared with healthy control subjects but was longest for cognitively impaired Parkinson's disease groups. The strongest predictor of average fixation duration was disease severity. Analysing only data from the most complex task, with the highest error rates, both cognitive impairment and disease severity contributed to a predictive model for fixation duration [F(2,76) = 12.52, P ≤ 0.001], but medication dose did not (r = 0.18, n = 78, P = 0.098, not significant). This study highlights the potential use of exploration strategy measures as a marker of cognitive decline in Parkinson's disease and reveals the efficiency by which fixations and saccades are deployed in the build-up to a cognitive response, rather than merely focusing on the outcome itself. The prolongation of fixation duration, present to a small but significant degree even in cognitively normal subjects with Parkinson's disease, suggests a disease-specific impact on the networks directing visual exploration, although the study also highlights the multi-factorial nature of changes in exploration and the significant impact of cognitive decline on efficiency of visual search.

Energy-Efficient Management Of Heterogeneous Wireless Sensor Networks

Various applications for the purposes of event detection, localization, and monitoring can benefit from the use of wireless sensor networks (WSNs). Wireless sensor networks are generally easy to deploy, with flexible topology and can support diversity of tasks thanks to the large variety of sensors that can be attached to the wireless sensor nodes. To guarantee the efficient operation of such a heterogeneous wireless sensor networks during its lifetime an appropriate management is necessary. Typically, there are three management tasks, namely monitoring, (re) configuration, and code updating. On the one hand, status information, such as battery state and node connectivity, of both the wireless sensor network and the sensor nodes has to be monitored. And on the other hand, sensor nodes have to be (re)configured, e.g., setting the sensing interval. Most importantly, new applications have to be deployed as well as bug fixes have to be applied during the network lifetime. All management tasks have to be performed in a reliable, time- and energy-efficient manner. The ability to disseminate data from one sender to multiple receivers in a reliable, time- and energy-efficient manner is critical for the execution of the management tasks, especially for code updating. Using multicast communication in wireless sensor networks is an efficient way to handle such traffic pattern. Due to the nature of code updates a multicast protocol has to support bulky traffic and endto-end reliability. Further, the limited resources of wireless sensor nodes demand an energy-efficient operation of the multicast protocol. Current data dissemination schemes do not fulfil all of the above requirements. In order to close the gap, we designed the Sensor Node Overlay Multicast (SNOMC) protocol such that to support a reliable, time-efficient and energy-efficient dissemination of data from one sender node to multiple receivers. In contrast to other multicast transport protocols, which do not support reliability mechanisms, SNOMC supports end-to-end reliability using a NACK-based reliability mechanism. The mechanism is simple and easy to implement and can significantly reduce the number of transmissions. It is complemented by a data acknowledgement after successful reception of all data fragments by the receiver nodes. In SNOMC three different caching strategies are integrated for an efficient handling of necessary retransmissions, namely, caching on each intermediate node, caching on branching nodes, or caching only on the sender node. Moreover, an option was included to pro-actively request missing fragments. SNOMC was evaluated both in the OMNeT++ simulator and in our in-house real-world testbed and compared to a number of common data dissemination protocols, such as Flooding, MPR, TinyCubus, PSFQ, and both UDP and TCP. The results showed that SNOMC outperforms the selected protocols in terms of transmission time, number of transmitted packets, and energy-consumption. Moreover, we showed that SNOMC performs well with different underlying MAC protocols, which support different levels of reliability and energy-efficiency. Thus, SNOMC can offer a robust, high-performing solution for the efficient distribution of code updates and management information in a wireless sensor network. To address the three management tasks, in this thesis we developed the Management Architecture for Wireless Sensor Networks (MARWIS). MARWIS is specifically designed for the management of heterogeneous wireless sensor networks. A distinguished feature of its design is the use of wireless mesh nodes as backbone, which enables diverse communication platforms and offloading functionality from the sensor nodes to the mesh nodes. This hierarchical architecture allows for efficient operation of the management tasks, due to the organisation of the sensor nodes into small sub-networks each managed by a mesh node. Furthermore, we developed a intuitive -based graphical user interface, which allows non-expert users to easily perform management tasks in the network. In contrast to other management frameworks, such as Mate, MANNA, TinyCubus, or code dissemination protocols, such as Impala, Trickle, and Deluge, MARWIS offers an integrated solution monitoring, configuration and code updating of sensor nodes. Integration of SNOMC into MARWIS further increases performance efficiency of the management tasks. To our knowledge, our approach is the first one, which offers a combination of a management architecture with an efficient overlay multicast transport protocol. This combination of SNOMC and MARWIS supports reliably, time- and energy-efficient operation of a heterogeneous wireless sensor network.