A Parametric Study Of A Turbogenerator On A Diesel-Electric Hybrid Bus

The fuel consumption of automotive vehicles has become a prime consideration to manufacturers and operators as fuel prices continue to rise steadily, and legislation governing toxic emissions becomes ever more strict. This is particularly true for bus operators as government fuel subsidies are cut or removed.

In an effort to reduce the fuel consumption of a diesel-electric hybrid bus, an exhaust recovery turbogenerator has been selected from a wide ranging literature review as the most appropriate method of recovering some of the wasted heat in the exhaust line. This paper examines the effect on fuel consumption of a turbogenerator applied to a 2.4-litre diesel engine.

A validated one-dimensional engine model created using Ricardo WAVE was used as a baseline, and was modified in subsequent models to include a turbogenerator downstream, and in series with, the turbocharger turbine. A fuel consumption map of the modified engine was produced, and an in-house simulation tool was then used to examine the fuel economy benefit delivered by the turbogenerator on a bus operating on various drive-cycles.

A parametric study is presented which examined the performance of turbogenerators of various size and power output. The operating strategy of the turbogenerator was also discussed with a view to maximising turbine efficiency at each operating point.

The performance of the existing turbocharger on the hybrid bus was also investigated; both the compressor and turbine were optimised and the subsequent benefits to the fuel consumption of the vehicle were shown.

The final configuration is then presented and the overall improvement in fuel economy of the hybrid bus was determined over various drive-cycles.

Confronto tra diverse localizzazioni di un impianto eolico contemperando produttività ed impatto visivo

This paper proposes a series of variations in designing the location of a wind farm on Monti della Tolfa. These project solutions aim at mitigating the visual impact caused by the wind aerogenerators. Besides the usual location of the wind aerogenerators on the skyline, these alternatives within the project design relate to the placement of wind turbines in the middle and at the bottom of the hillside. Other possible mitigation forms relate to the dimensions and the colour of the wind towers. This study proposes both a non-monetary and monetary analysis of the visual impact related to each project proposal. The final aim of the paper is to analyze economic and financial costs-benefits for each alternative to find out the economic optimal solution.

Biomass-derived oxymethylene ethers as diesel additives: A techno-economic assessment

Conversion of agricultural biomass such as wood chips, wheat straw and forest residue for the production of fuels can help in reducing GHG emissions since they are considered as nearly carbon neutral. Around the world there is a significant amount of forest and agricultural-biomass available which could be used for the production of liquid fuels that can be blended with the petroleum-based diesel. Oxymethylene ethers (OMEs) can be derived from biomass via gasification, water-gas shift reaction and methanol production. The addition of OMEs to conventional diesel fuel has great potential to reduce soot formation during the combustion in diesel engines. Unlike methanol and dimethyl ether (DMM) which can also reduce soot formation, the physical properties of OMEs allow the use in modern diesel engines without significant change of the engines infrastructure. In this study, a detailed and data intensive process simulation model was developed to simulate all the unit operations involved in the production of OMEs from biomass. The unit operation considered include biomass drying, gasification, gas cleaning, water gas shift reaction, methanol production and OMEs synthesis. The simulation results were then utilized to conduct a detailed techno-economic assessment study of the whole biomass conversion chain to determine the most attractive pathways for OMEs production. Our recent study shows that the key parameters affecting the OMEs production are equivalence ratio, H2/CO ratio and optimal air flow. Overall, the cost of production ($/liter) of OMEs from different biomass feedstock in Alberta will be determined

Smartphone and GPS technology for freeroaming dog population surveillance -a methodological study (Studio metodologico sull’applicazione di smartphone e tecnologia GPS alla sorveglianza delle popolazioni di cani vaganti)

Free-roaming dogs (FRD) represent a potential threat to the quality of life in cities from an ecological, social and public health point of view. One of the most urgent concerns is the role of uncontrolled dogs as reservoirs of infectious diseases transmittable to humans and, above all, rabies. An estimate of the FRD population size and characteristics in a given area is the first step for any relevant intervention programme. Direct count methods are still prominent because of their non-invasive approach, information technologies can support such methods facilitating data collection and allowing for a more efficient data handling. This paper presents a new framework for data collection using a topological algorithm implemented as ArcScript in ESRI® ArcGIS software, which allows for a random selection of the sampling areas. It also supplies a mobile phone application for Android® operating system devices which integrates Global Positioning System (GPS) and Google Maps™. The potential of such a framework was tested in 2 Italian regions. Coupling technological and innovative solutions associated with common counting methods facilitate data collection and transcription. It also paves the way to future applications, which could support dog population management systems.

Christian Gottlob Neefe and the Early Reception of Le nozze di Figaro and Don Giovanni

A brief account of Christian Gottlob Neefe's engagement with Mozart's Le nozze di Figaro and Don Giovanni as exemplified in his correspondence.

Uso del suolo e accessi in stazione: un’analisi di regressione multipla per la rete metropolitana di Napoli

Obiettivo dello studio è l’esame delle relazioni esistenti tra il numero di accessi alle stazioni della metropolitana e le caratteristiche di uso del suolo di ciascuna area di influenza. A questo scopo è stata implementata un’analisi di regressione lineare multipla, utilizzando come variabile indipendente il numero di viaggiatori in ingresso alle stazioni e come variabili dipendenti le caratteristiche socio-economiche e di uso del suolo delle aree urbane che circondano le stazioni. L’utilizzo di tecniche GIS ha permesso la costruzione del database e la visualizzazione su mappe tematiche dei risultati. In sintesi dallo studio emerge che il flusso di passeggeri è influenzato in misura prevalente dall’indice di connessione nelle aree centrali, dalla densità di addetti nelle aree periferiche e dalla densità residenziale e dal mix funzionale nelle aree di stazione suburbane. I risultati di questo studio possono contribuire al processo decisionale ed alla definizione di strategie di Transit Oriented Development al fine di incrementare l’utilizzo della rete su ferro o viceversa possono essere utilizzati per la valutazione di pratiche di uso del suolo.