Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.

Low levels of sex hormone-binding globulin and hyperproinsulinemia as markers of increased pancreatic ß-cell demand in men

Low levels of sex hormone-binding globulin (SHBG) are considered to be an indirect index of hyperinsulinemia, predicting the later onset of diabetes mellitus type 2. In the insulin resistance state and in the presence of an increased pancreatic ß-cell demand (e.g. obesity) both absolute and relative increases in proinsulin secretion occur. In the present study we investigated the correlation between SHBG and pancreatic ß-cell secretion in men with different body compositions. Eighteen young men (30.0 ± 2.4 years) with normal glucose tolerance and body mass indexes (BMI) ranging from 22.6 to 43.2 kg/m2 were submitted to an oral glucose tolerance test (75 g) and baseline and 120-min blood samples were used to determine insulin, proinsulin and C-peptide by specific immunoassays. Baseline SHBG values were significantly correlated with baseline insulin (r = -0.58, P<0.05), proinsulin (r = -0.47, P<0.05), C-peptide (r = -0.55, P<0.05) and also with proinsulin at 120 min after glucose load (r = -0.58, P<0.05). Stepwise regression analysis revealed that proinsulin values at 120 min were the strongest predictor of SHBG (r = -0.58, P<0.05). When subjects were divided into obese (BMI >28 kg/m2, N = 8) and nonobese (BMI £25 kg/m2, N = 10) groups, significantly lower levels of SHBG were found in the obese subjects. The obese group had significantly higher baseline proinsulin, C-peptide and 120-min proinsulin and insulin levels. For the first time using a specific assay for insulin determination, a strong inverse correlation between insulinemia and SHBG levels was confirmed. The finding of a strong negative correlation between SHBG levels and pancreatic ß-cell secretion, mainly for the 120-min post-glucose load proinsulin levels, reinforces the concept that low SHBG levels are a suitable marker of increased pancreatic ß-cell demand.

Reduction of nitrogen oxide emissions in lime kiln

Different nitrogen oxide removal technologies for rotary lime kiln are studied in this thesis, the main focus being in commercial technologies. Post-combustion methods are investigated in more detail as potential possible NOx removal with combustion methods in rotary lime kiln is more limited or primary methods are already in use. However, secondary methods as NOx scrubber, SNCR or SCR technologies are not listed as the Best Available Technologies defined by European Union. BAT technologies for NOx removal in lime kiln are (1) Optimised combustion and combustion control, (2) Good mixing of fuel and air, (3) Low-NOx burner and (4) Fuel selection/low-N fuel. SNCR method is the most suitable technique for NOx removal in lime kiln when NOx removal from 50 % to 70 % is required in case primary methods are already in use or cannot be applied. In higher removal cases ammonia slip is an issue in SNCR. By using SCR better NOx reduction can be achieved but issues with catalyst materials are expected to arise because of the dust and sulphur dioxide which leads to catalyst poison formation in lower flue gas temperatures. NOx scrubbing has potential when simultaneous NOx and SO2 removal is required. The challenge is that NO cannot be scrubbed directly, but once it is oxidized to NO2 or further scrubbing can be performed as the solubility of NO2 is higher. Commercial installations have not been made regarding SNCR, SCR or NOx scrubbing regarding rotary lime kiln. For SNCR and SCR the closest references come from cement industry.

Reduction of intraspecific aggression in adult rats by neonatal treatment with a selective serotonin reuptake inhibitor

Most studies suggest that serotonin exerts an inhibitory control on the aggression process. According to experimental evidence, this amine also influences growth and development of the nervous tissue including serotoninergic neurons. Thus, the possibility exists that increased serotonin availability in young animals facilitates a long-lasting effect on aggressive responses. The present study aimed to investigate the aggressive behavior of adult rats (90-120 days) treated from the 1st to the 19th postnatal day with citalopram (CIT), a selective serotonin reuptake inhibitor (20 mg/kg, sc, every 3 days). Aggressive behavior was induced by placing a pair of rats (matched by weight) in a box (20 x 20 x 20 cm), and submitting them to a 20-min session of electric footshocks (five 1.6-mA - 2-s current pulses, separated by a 4-min intershock interval). When compared to the control group (rats treated for the same period with equivalent volumes of saline solution), the CIT group presented a 41.4% reduction in the duration of aggressive response. The results indicate that the repeated administration of CIT early in life reduces the aggressive behavior in adulthood and suggest that the increased brain serotoninergic activity could play a role in this effect.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.

Utilization of AMI-Technology in a Multilayered Demand Response Service Environment

This thesis studied the performance of Advanced metering infrastructure systems in a challenging Demand Response environment. The aim was to find out what kind of challenges and bottlenecks could be met when utilizing AMI-systems in challenging Demand Response tasks. To find out the challenges and bottlenecks, a multilayered demand response service concept was formed. The service consists of seven different market layers which consist of Nordic electricity market and the reserve markets of Fingrid. In the simulations the AMI-systems were benchmarked against these seven market layers. It was found out, that the current generation AMI-systems were capable of delivering Demand Response on the most challenging market layers, when observed from time critical viewpoint. Additionally, it was found out, that to enable wide scale Demand Response there are three major challenges to be acknowledged. The challenges hindering the utilization of wide scale Demand Response were related to poor standardization of the systems in use, possible problems in data connectivity solutions and the current electricity market regulation model.

Accuracy improvement of a demand forecasting model

This research concerns different statistical methods that assist to increase the demand forecasting accuracy of company X’s forecasting model. Current forecasting process was analyzed in details. As a result, graphical scheme of logical algorithm was developed. Based on the analysis of the algorithm and forecasting errors, all the potential directions for model future improvements in context of its accuracy were gathered into the complete list. Three improvement directions were chosen for further practical research, on their basis, three test models were created and verified. Novelty of this work lies in the methodological approach of the original analysis of the model, which identified its critical points, as well as the uniqueness of the developed test models. Results of the study formed the basis of the grant of the Government of St. Petersburg.

Evaluating and improving demand forecast practices for B2B and B2C sectors

Demand forecasting is one of the fundamental managerial tasks. Most companies do not know their future demands, so they have to make plans based on demand forecasts. The literature offers many methods and approaches for producing forecasts. Former literature points out that even though many forecasting methods and approaches are available, selecting a suitable approach and implementing and managing it is a complex cross-functional matter. However, it’s relatively rare that researches are focused on the differences in forecasting between consumer and industrial companies. The aim of this thesis is to investigate the potential of improving demand forecasting practices for B2B and B2C sectors in the global supply chains. Business to business (B2B) sector produces products for other manufacturing companies. On the other hand, consumer (B2C) sector provides goods for individual buyers. Usually industrial sector have a lower number of customers and closer relationships with them. The research questions of this thesis are: 1) What are the main differences and similarities in demand planning between B2B and B2C sectors? 2) How the forecast performance for industrial and consumer companies can be improved? The main methodological approach in this study is design science, where the main objective is to develop tentative solutions to real-life problems. The research data has been collected from a case company. Evaluation and improving in organizing demand forecasting can be found in three interlinked areas: 1) demand planning operational environment, 2) demand forecasting techniques, 3) demand information sharing scenarios. In this research current B2B and B2C demand practices are presented with further comparison between those two sectors. It was found that B2B and B2C sectors have significant differences in demand practices. This research partly filled the theoretical gap in understanding the difference in forecasting in consumer and industrial sectors. In all these areas, examples of managerial problems are described, and approaches for mitigating these problems are outlined.

Comparison of morning and afternoon exercise training for asthmatic children

Fitness improvement was used to compare morning with afternoon exercise periods for asthmatic children. Children with persistent moderate asthma (according to GINA criteria), 8 to 11 years old, were divided into 3 groups: morning training group (N = 23), afternoon training group (N = 23), and non-training group (N = 23). The program was based on twice a week 90-min sessions for 4 months. We measured the 9-min running distance, resting heart rate and abdominal muscle strength (sit-up number) before and after the training. All children took budesonide, 400 µg/day, and an on demand inhaled ß-agonist. The distance covered in 9 min increased (mean ± SEM) from 1344 ± 30 m by 248 ± 30 m for the morning group, from 1327 ± 30 m by 162 ± 20 m for the afternoon group, and from 1310 ± 20 m by 2 ± 20 m for the control group (P < 0.05 for the comparison of morning and afternoon groups with the control group by ANOVA and P > 0.05 for morning with afternoon comparison). The reduction of resting heart rate from 83 ± 1, 85 ± 2 and 86 ± 1 bpm was 5.1 ± 0.8 bpm in the morning group, 4.4 ± 0.8 bpm in the afternoon group, and -0.2 ± 0.7 bpm in the control group (P > 0.05 for morning with afternoon comparison and P < 0.05 versus control). The number of sit-ups in the morning, afternoon and control groups increased from 22.0 ± 1.7, 24.3 ± 1.4 and 23 ± 1.1 sit-ups by 9.8 ± 0.9, 7.7 ± 1.4, and 1.9 ± 0.7 sit-ups, respectively (P > 0.05 for morning with afternoon comparison and P < 0.05 versus control). No statistically significant differences were detected between the morning and afternoon groups in terms of physical training of asthmatic children.

Unequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings

Permanent magnet synchronous machines with fractional-slot non-overlapping windings (FSPMSM), also known as tooth-coil winding permanent magnet synchronous machines (TCW PMSM), have been under intensive research during the latest decade. There are many optimization routines explained and implemented in the literature in order to improve the characteristics of this machine type. This paper introduces a new technique for torque ripple minimization in TCW PMSM. The source of torque harmonics is also described. The low order torque harmonics can be harmful for a variety of applications, such as direct drive wind generators, direct drive light vehicle electrical motors, and for some high precision servo applications. The reduction of the torque ripple harmonics with the lowest orders (6th and 12th) is realized by machine geometry optimization technique using finite element analysis (FEA). The presented optimization technique includes the stator geometry adjustment in TCW PMSMs with rotor surface permanent magnets and with rotor embedded permanent magnets. Influence of the permanent magnet skewing on the torque ripple reduction and cogging torque elimination was also investigated. It was implemented separately and together with the stator optimization technique. As a result, the reduction of some torque ripple harmonics was attained.

Lauhdevoimakapasiteetin ennenaikaisen poistumisen energiataloudelliset vaikutukset

Tässä diplomityössä on tutkittu lauhdekapasiteetin ennenaikaisen markkinoilta poistumisen energiataloudellisia vaikutuksia. Tarkastelu toteutettiin sähkömarkkinamallinnuksen avulla luomalla kaksi erilaista lauhdekapasiteettiskenaariota perustuen arvioituun lauhdekapasiteetin poistumiseen sekä vastavuoroisesti sen säilymiseen markkinoilla. Skenaarioiden vaikutuksia tutkittiin myös herkkyystarkasteluin ja tuloksia analysoitiin energiataloudellisesta näkökulmasta. Työn tavoitteena oli selvittää lauhdekapasiteetin ennenaikaisen poistumisen energiataloudellista kustannusta. Viime vuosien pitkittynyt talouden taantuma on hillinnyt kysynnän ennakoitua kehitystä johtaen alhaiseen sähkön markkinahintatasoon. Samalla tiukentuneet energiatuotannon ympäristövaatimukset asettavat investointirasitteita perinteisille voimalaitoksille heikentäen niiden taloudellisen kannattavuuden edellytyksiä. Markkinasähkön alhainen hintataso yhdessä investointirasitteiden kanssa asettaa haasteita etenkin usein rajatuotantomuotona toimiville lauhdelaitoksille. Alhaisen kannattavuuden seurauksena lauhdekapasiteettia arvioidaan poistuvan ennen teknisen käyttöiän täyttymistä markkinoilta merkittävästi lähivuosina. Kapasiteetin poistuminen kasvattaa oman tuotannon ja kysynnän välistä tehovajetta, minkä vuoksi sähköjärjestelmän nähdään tiukentuvan merkittävästi ennen rakenteilla olevan ydinvoimalaitoksen valmistumista. Työssä toteutettujen mallinnusten perusteella lauhdekapasiteetin väheneminen nostaa sähkön hintatasoa sekä lisää korkeiden hintapiikkien esiintymistä merkittävästi suhteessa korkeamman kapasiteetin tuloksiin. Sähköjärjestelmä on hyvin tiukka ennen rakenteilla olevan ydinvoimalaitoksen käyttöönottoa, minkä vuoksi lauhdekapasiteetin eroavaisuuksien vaikutukset ovat merkittävä etenkin poikkeuksellisen kylmänä vuotena. Lauhdekapasiteetin merkitys pienenee selvästi 2020-luvulla, kun oma tuotantokapasiteetti kasvaa. Työn tulosten perusteella lähivuosina alhaisemman lauhdekapasiteetin aiheuttama vuotuinen energiataloudellinen kustannus on huomattavasti korkeampi kuin laitosten kannattavan ylläpidon vaatima kustannus.

Oral triiodothyronine for the prevention of thyroid hormone reduction in adult valvular cardiac surgery

Treatment of non-thyroidal illness by intravenous triiodothyronine (T3) after cardiac surgery causes a disproportional elevation of hormone levels. The administration of oral T3, which has never been studied in this context, could cause physiological hormone levels. The aim of this study was to test oral T3 for the prevention of T3 reduction during the postoperative period of valvular cardiac surgery in adults. Eighteen patients who underwent cardiac surgery for valvular disease with invasive hemodynamic monitoring were randomly assigned to 2 groups: the T group received oral T3 (N = 8), 25 µg three times/day, initiated 24 h before surgery and maintained for 48 h and the NT group (N = 10) received placebo. Serum T3, thyroxine and thyrotropin were determined at baseline, 1 h before surgery, within 30 min of cardiopulmonary bypass and 6, 12, 24, and 48 h after removal of the aortic cross-clamp. Baseline T3 was similar in both groups (T: 119 ± 13; NT: 131 ± 9 ng/dL). Serum T3 increased during the first 24 h in the T group compared to the NT group (232 ± 18 vs 151 ± 13 ng/dL; P < 0.001). In the NT group, T3 was reduced by 24% (P = 0.007) 6 h after removal of the aortic cross-clamp, confirming the non-thyroidal illness syndrome. There were no differences in clinical or hemodynamic parameters between groups. Administration of oral T3 prevented its serum reduction after valvular cardiac surgery in adults, with normal serum levels for 48 h without disproportional elevations.

Skannausratkaisun ja yleisarkiston käyttöönotto potilasasiakirjojen käsittelyyn terveydenhuollossa

Julkinen terveydenhuolto on muutoksen ja monien haasteiden edessä, kun palveluiden kysyntä ja laatuvaatimukset kasvavat. Julkisen sektorin taloudellinen tilanne aiheuttaa paineita kustannusten pienentämiseksi ja toimintojen keskittämiseen. Muutoksista huolimatta terveydenhuollon henkilökunnalla tulee olla mahdollisimman helppo ja nopea pääsy potilasta koskeviin ajantasaisiin ja olennaisiin tietoihin. Tämä diplomityö tarkastelee tietojärjestelmän käyttöönottoprosessia, paperisten potilasasiakirjojen digitalisointia ja niiden hyödyntämistä hoitoprosessissa. Tutkimuksessa esitellään paperilähetteiden käsittely, skannausratkaisun käyttöönotto ja integrointi HUS:n XDS-yleisarkistoon. Tutkimuksen teoreettinen viitekehys koostuu käyttöönottoprosessista ja siihen liittyvistä haasteista, onnistumiseen vaikuttavista tekijöistä sekä onnistumiseen mittaamiseen käytettävissä olevista malleista ja mittareista. Tietojärjestelmän käyttöönoton onnistumiseen vaikutti erityisesti ennakkosuunnittelu ja muutosvastarinnan ymmärtäminen. Tietojärjestelmän käyttöönotossa havaittiin, että muutos hyväksytään käyttäjien osalta, kun se vastaa käyttäjien todelliseen tarpeeseen. Erityisesti lähetteiden käsittely sähköisessä muodossa koettiin hyödylliseksi ja tarpeelliseksi, koska tämä mahdollisti potilastietojen saatavuuden paikasta ja ajasta riippumatta ja tuki potilaan hoitoprosessia. Käyttöönotossa havaittiin, että skannausprosessi ei voi olla samanlainen kaikkialla, koska eri yksiköissä tapahtuva skannaus voi olla potilaskeskeistä tai asiakirjatyyppien mukaan tai kompeksista ja suuriin määriin perustuvaa.

Cost Reduction of Permanent Magnet Synchronous Machines

Electrical machine drives are the most electrical energy-consuming systems worldwide. The largest proportion of drives is found in industrial applications. There are, however many other applications that are also based on the use of electrical machines, because they have a relatively high efficiency, a low noise level, and do not produce local pollution. Electrical machines can be classified into several categories. One of the most commonly used electrical machine types (especially in the industry) is induction motors, also known as asynchronous machines. They have a mature production process and a robust rotor construction. However, in the world pursuing higher energy efficiency with reasonable investments not every application receives the advantage of using this type of motor drives. The main drawback of induction motors is the fact that they need slipcaused and thus loss-generating current in the rotor, and additional stator current for magnetic field production along with the torque-producing current. This can reduce the electric motor drive efficiency, especially in low-speed, low-power applications. Often, when high torque density is required together with low losses, it is desirable to apply permanent magnet technology, because in this case there is no need to use current to produce the basic excitation of the machine. This promotes the effectiveness of copper use in the stator, and further, there is no rotor current in these machines. Again, if permanent magnets with a high remanent flux density are used, the air gap flux density can be higher than in conventional induction motors. These advantages have raised the popularity of PMSMs in some challenging applications, such as hybrid electric vehicles (HEV), wind turbines, and home appliances. Usually, a correctly designed PMSM has a higher efficiency and consequently lower losses than its induction machine counterparts. Therefore, the use of these electrical machines reduces the energy consumption of the whole system to some extent, which can provide good motivation to apply permanent magnet technology to electrical machines. However, the cost of high performance rare earth permanent magnets in these machines may not be affordable in many industrial applications, because the tight competition between the manufacturers dictates the rules of low-cost and highly robust solutions, where asynchronous machines seem to be more feasible at the moment. Two main electromagnetic components of an electrical machine are the stator and the rotor. In the case of a conventional radial flux PMSM, the stator contains magnetic circuit lamination and stator winding, and the rotor consists of rotor steel (laminated or solid) and permanent magnets. The lamination itself does not significantly influence the total cost of the machine, even though it can considerably increase the construction complexity, as it requires a special assembly arrangement. However, thin metal sheet processing methods are very effective and economically feasible. Therefore, the cost of the machine is mainly affected by the stator winding and the permanent magnets. The work proposed in this doctoral dissertation comprises a description and analysis of two approaches of PMSM cost reduction: one on the rotor side and the other on the stator side. The first approach on the rotor side includes the use of low-cost and abundant ferrite magnets together with a tooth-coil winding topology and an outer rotor construction. The second approach on the stator side exploits the use of a modular stator structure instead of a monolithic one. PMSMs with the proposed structures were thoroughly analysed by finite element method based tools (FEM). It was found out that by implementing the described principles, some favourable characteristics of the machine (mainly concerning the machine size) will inevitable be compromised. However, the main target of the proposed approaches is not to compete with conventional rare earth PMSMs, but to reduce the price at which they can be implemented in industrial applications, keeping their dimensions at the same level or lower than those of a typical electrical machine used in the industry at the moment. The measurement results of the prototypes show that the main performance characteristics of these machines are at an acceptable level. It is shown that with certain specific actions it is possible to achieve a desirable efficiency level of the machine with the proposed cost reduction methods.

Luteinizing hormone reduction by the male potency herb, Butea superba Roxb.

To determine if Butea superba Roxb., a traditional Thai male potency herb, has androgenic activity in 60-day-old male Wistar rats, we measured its effects on the pituitary-testicular axis and sex organs. Intact and orchidectomized adult male rats were subdivided into five groups (10 rats/group): distilled water, Butea superba (BS)-10, BS-50, BS-250, and testosterone propionate (TP). They received 0, 10, 50, and 250 mg·kg body weight-1·day-1 BS in distilled water by gavage and 6 mg·kg body weight-1·day-1 TP sc, respectively, during the 30-day treatment period. Blood was collected every 15 days and luteinizing hormone (LH), follicle-stimulating hormone (FSH) and testosterone were measured. Changes of weight and histological appearance of sex organs were determined at the end of the 30-day treatment and 15-day post-treatment periods. TP treatment reduced serum FSH and LH levels and significantly increased the weight of the seminal vesicles and epididymis, in accordance with histopathological changes, in both intact and orchidectomized rats. No changes in serum testosterone, LH, and FSH levels were observed in any of the intact rats treated with BS, but a significant increase in seminal vesicle weight was observed only in the BS-250 group. Although a significant reduction in serum LH was detected in the BS-50 and BS-250 groups of orchidectomized rats, no significant change in weight or histology of sex organs was observed. Thus, we conclude that B. superba needs endogenous testosterone to work synergistically to stimulate the accessory sex organ of intact animals and can potentially exhibit an LH reduction effect in orchidectomized animals.